|
|
Click On Picture
|
1990 Moline Machinery Dough Sheeter - 3 ft. 8 in Wide
|
|
Mfg: Moline Machinery LLC
|
Model: 10-44-S
|
|
Stock No: DNBA052
|
Serial No: 10-90-286
|
|
1990 Moline Machinery Dough Sheeter. Model: 10-44-S. Roller width: 3 ft. 8 in. Maximum aperture/clearance above roller: 3 ft. 8 in. W. x .625 in. H. Baldor electric motor, 1-1/2 hp, 1140 rpm, 5.0/2.5 amps, 60 Hz, 3 phase. Leeson electric motor, 1 hp. Infeed/exit height: 3 ft. 11 in. Overall dimensions: 6 ft. 6 in. L x 3 ft. 1 in. W x 6 ft. 7 in. H.(ACN800).
|
|
Click here for more information (316.2 KB)
|
|
|
Click On Picture
|
1996 Nuova Euromec Sheeter
|
|
Mfg: Nuova Euromec
|
Model: 22LA/1
|
|
Stock No: SNSL062.1
|
Serial No: 01547
|
|
1996 Nuova Euromec Sheeter. Model: 22LA/1. S/N: 01547. Belt width: 16 in. Maximum aperture/clearance above belt: 16 in. W x 1 in. H. Infeed hopper dimensions: 24 in. L x 24 in. W. Unit is equipped with a 6 in. dia. x 18-1/2 in. W press. Isgev Motor, 1 hp, 1700 rpm, 480 V, 1.55 amps, 60 Hz, 3 phase. Montovario Speed Reducer. Conveyor exit height: 21 in. Inlets: (1) 12 in. L x 12 in. W infeed. Outlets: (1) 16 in. W x 1 in. H. Overall dimensions: 38 in. L x 37 in. W x 39 in. H.
|
|
Click here for more information (308.0 KB)
|
|
|
Click On Picture
|
Op’tRoot Pie Slicer
|
|
Mfg: Op’tRoot
|
Model:
|
|
Stock No: ERCS002.
|
Serial No:
|
|
Op’tRoot Pie Slicer. Belt width: 13 in. Plate diameter: 16 in. Power supply: 208 volts, 60 Hz, 3 phase. Mez Motor, 5 hp, 1740 rpm, 208 V, 18.8 amps, 60 Hz. Conveyor infeed/exit height: 39 in. Overall dimensions: 99 in. L x 24 in. W x 87-1/2 in. H.
|
|
Click here for more information (267.1 KB)
|
|
|
Click On Picture
|
1998 SPC Company Blueberries Color Sorter
|
|
Mfg: SPC Company
|
Model: BCS-3000C F
|
|
Stock No: cFPDW001.
|
Serial No:
|
|
1998 SPC Company Blueberries Color Sorter. Model BCS-3000C F. (2) Cameras, 48 air jets and trash outlet. Capacity about 6,000 to 8,000 pounds of blueberries and cranberries through it per hour. Works excellent with fresh, dry and frozen product. Use for blueberries and cranberries but can be used on many other fruits and vegetables. Recently had the cameras calibrated, new air valves installed, and replaced the belting. The sorter is on adjustable height legs with casters so it is very easy to move around and adjust the height. 240 V. (ACN700)
|
|
Click here for more information (235.5 KB)
|
|
|
Click On Picture
|
Young Filter/Bag Dump Station
|
|
Mfg: Young Industries
|
Model:
|
|
Stock No: ENDX747b.3a
|
Serial No: FBD-1778
|
|
Young Industries Filter/Bag Dump Station. S/N FBD-1778, Shop #: 14234-1, Size #: 24-4, on 5 in. Casters. Filters: Qty: 4, 24 in. L x 5 in. Diameter. Magnehelic Water Level Indicator, Norgren Pneumatic Air Valve. Filter Pulse Timer: 1 phase, 60 Hz, 120 Volts. Marathon 4-in-1 Electric Motor, 3 phase, 60 Hz, 1/2 hp, 3,450 rpm, 575 volts, 0.9 FLA. Top Opening 20 in. Diameter, Bottom Opening 10 in. Diameter. Overall Dimensions 57 in. L x 45 in. W x 54 in. H.
|
|
Click here for more information (512.1 KB)
|
|
|
Click On Picture
|
Food Technology Corporation Texture Press
|
|
Mfg: Food Technology Corporation
|
Model: TP-1A
|
|
Stock No: SGMB080.1
|
Serial No: 2093
|
|
Food Technology Corporation Texture Press. Model: TP-1A. S/N: 2093. MAWP: 400 psi. Power supply: 105-125 V, 10 amps, 60 Hz. Shaft diameter: 1 in. Delta Power Electric Motor, 3/4 hp, 1725 rpm, 115/230 V, 60 Hz, 10.0/5.0 amps, single phase. Used in production floor grading of food samples.Overall dimensions: 25-1/2 in. L x 20 in. W x 33-1/2 in. H. (ACN125-62).
|
|
Click here for more information (230.7 KB)
|
|
|
Click On Picture
|
1990 Proctor Schwartz Batch Type Nut Roaster Model 62
|
|
Mfg: Proctor Schwartz
|
Model: 62
|
|
Stock No: GICS135.30
|
Serial No: K24280
|
|
1990 Proctor Schwartz Batch Type Nut Roaster. Model 62. S/N K24280. Nut roaster can roast 80 lbs of nuts per batch. Around 3 batches per hour. Unit has 16 sq. ft. of holding area. Drying chamber is 30 in. W x 40 in. Deep x 42 in. H, designed to accommodate four 30 in. x 40 in. pans. Overall dimensions are 4 ft. deep x 9 ft. long x 7 ft. Tall. This unit was originally used by Godiva Chocolatier, Inc. (ACN510).
|
|
Click here for more information (631.7 KB)
|
|
|
Click On Picture
|
1992 FMC Syntron Cone Vibratory Shaker
|
|
Mfg: FMC Technologies
|
Model:
|
|
Stock No: CCFP505.
|
Serial No:
|
|
1992 FMC Syntron Cone Vibratory Shaker. Shaker features a 31 in. dia. x 45 in. H. conical hopper with attached lid. Product exits through a 28 in. L x 10 in. W x 4 in. H. chute. Inlets/outlets: (1) 8 in. dia. central inlet, and (1) 6-1/2 in. dia. central outlet. Syntron Magnetic Vibrator Motor, Model: V-20. S/N EE11822115 V, 2.0 amps, 60 Hz. Syntron Magnetic Feeder, Model: F-152 A. S/N: L69952115 V, 2.5 amps, 60 Hz. Equipment is frame-mounted. Overall dimensions: 36 in. L x 31 in. W x 61 in. H.
|
|
Click here for more information (220.7 KB)
|
|
|
Click On Picture
|
Ozaf Mechanical Feeder - (96) Compartments
|
|
Mfg: Ozaf
|
Model:
|
|
Stock No: NOI8048
|
Serial No:
|
|
Ozaf Mechanical Feeder. Unit has (96) compartments and is constructed of polyethylene. Inside straight wall dimensions: 3 ft. 11 in. dia. x 9 in. H. Infeed chute dimensions: 1 ft. 1/2 in. L x 5 in. W. x 5 in. H. (2) Penta DC motors. Model: MP100A20. S/N: ITN. Power supply: 180 V, 2 amps, 60 Hz, single phase. Mechanical feeders make it possible to convey and unscramble different types of items in a wide range of shapes such as caps, ring nuts, pumps, atomizers. Infeed height: 3 ft. Exit height: 4 ft. 3 in. Overall dimensions: 5 ft. 5 in. L x 4 ft. 5 in. W x 5 ft. 3 in. H.
|
|
Click here for more information (318.7 KB)
|
|
|
Click On Picture
|
Croll-Reynolds Multiple Nozzle Thermocompressor
|
|
Mfg: Croll-Reynolds
|
Model: M12-T
|
|
Stock No: 2500.PF1aB
|
Serial No: 52311-1, and 52311-2
|
|
(2) Croll-Reynolds Multiple Nozzle Thermocompressor. Model: M12-T. Material of construction: 316 SS body and steel cover. Number of Nozzles: (7). Maximum pressure: 40 psi. Inlets: (1) 4 in. dia. port with 9 in. flange and (8) 3/4 in. bolt holes (Motive fluid). (1) 12 in. port with a 19 in. flange and (12) 1 in. bolt holes (Suction). Outlet: (1) 12 in. port with a 19 in. flange and (12) 1 in. bolt holes. Overall dimensions: 8 ft. L x 1 ft. 5 in. W x 1 ft. 9 in. H. (ACN6 ea.)
|
|
Click here for more information (308.4 KB)
|
|
|
Click On Picture
|
Fedco Stainless Steel Topping Applicator
|
|
Mfg: Fedco Engineering Systems
|
Model:
|
|
Stock No: HDNP210C.6
|
Serial No:
|
|
Fedco Stainless Steel Topping Applicator. Has two agitators with drives. Hopper/agitator assembles slide length wide on track. Hopper dimensions (inside) 12 in. W, 32 in. L, 18 in. H. (Curved bottom). Has two on/off switches, on for each drive. Upper agitator switch runs straight to the motor. Lower agitator switch runs to Allen Bradley control drive, then to the motor. Control Drive: Bulleting 1333 Adjustable frequency AC Motor Drive. Allen Bradley, Cat No. 1333-AAB, Ser: B, S/N B17355, Input (3 phase) 460 volt, 50/60 Hz, 2.6 KVA, 3.3 amps. Output (3 phase): 460 volt, 60 Hz, 1.7 KVA, 2.1 amps. Dimensions of frame: 38 in. W, 85-½ in. L, 35 in. H. Overall dimensions: 38 in. W, 85-½ in. L, 51-½ in. H.
|
|
Click here for more information (227.1 KB)
|
|
|
Click On Picture
|
General Mills Stainless Steel Tank/Hopper- 2500 Gallon
|
|
Mfg: General Mills
|
Model:
|
|
Stock No: SGMI250.31
|
Serial No: 1057099
|
|
General Mills Stainless Steel Tank/Hopper- 2500 Gallon. S/N: 01057099. Inlets: (1) 1-1/2 in. dia. S-line, (1) 2-1/2 in. dia. pipe, (1) 3 in. dia. threaded fitting, (2) 19-1/2 in. diameter clamp ports. Outlets: (1) 43 in. dia. outlet with a 50 in. dia. flange and (8) 5/8 in. dia. attachment holes at a center-to-center distance of 46 in. Overall dimensions: 91 in. dia. x 18 ft. 4 in. H.
|
|
Click here for more information (201.8 KB)
|
|
|
Click On Picture
|
E-Quip Manufacturing Stainless Steel Hopper-625 Cu. Ft.
|
|
Mfg: E-Quip Manufacturing
|
Model: 129-800
|
|
Stock No: SFEP1011.14a
|
Serial No: 6709
|
|
E-Quip Manufacturing Stainless Steel Hopper-625 Cu. Ft. With discharge conveyors. Model: 129-800. S/N: 6709. Maximum aperture/clearance above each belt: 18 in. W x 16 in. H. (2) AA Electric Stainless Steel Motor, 3/4 hp, 1730 rpm, 208-230/460 V, 2.44/1.22 amps, 60 Hz, 3 phase. (2) Grove Flex-In-Line Gear Drive, 3 ratio, 576.6 rpm (final). Overall dimensions: 11 ft. 5 in. L x 88 in. W x 85 in. H.
|
|
Click here for more information (163.1 KB)
|
|
|
Click On Picture
|
MIC Modular Industrial Computer
|
|
Mfg: MIC
|
Model:
|
|
Stock No: SGMPB007.2
|
Serial No: 9702004-02
|
|
MIC Modular Industrial Computer. S/N: 9702004-02. Stainless steel body and base. Hewlett Packard HP Monitor A4330D, S/N: KR02009596. Computer screen dimensions: 25 in. L x 18 in. H. Principal memory: Envizex II with (2) USB connections, (2) Serial connections, (5) Connections for the system. Environment Protect Industrial Keyboard with HulaPoint pointing device. External on/off switch. Overall dimensions: 40 in. L x 20 in. W x 30 in. H.
|
|
Click here for more information (301.7 KB)
|
|
|
Click On Picture
|
Kice Industries Inc. Rotary Stream Splitters
|
|
Mfg: Kice Industries Inc.
|
Model: RSA5-2
|
|
Stock No: CESL010.
|
Serial No: 177481
|
|
Kice Industries Inc. Rotary Stream Splitters. Model: RSA5-2. S/N: 177481. Rotor assembly: 8 in dia. x 10-1/2 in. L. Inspection Door. Totally enclosed OSHA type chain guard. Adjustable motor mounts. Baldor Super-E Motor, 1 hp, 1750 rpm. 230/480 V, 2.0/1.4 amps, 60 Hz, 3 phase. Kice Speed Reducer, ratio: 1/29, 60.34 rpm out. Inlets: (1) 5 in. dia. infeed. Outlets: (2) 5 in. dia. discharge ports. Overall dimensions: 28-1/2 L x 24 in. W x 25-1/2 in. H.
|
|
Click here for more information (371.0 KB)
|
|
|
Click On Picture
|
Grieve Heat Treating Oven
|
|
Mfg: Grieve
|
Model: AF-850
|
|
Stock No: SGML025.1
|
Serial No: 370146
|
|
Grieve Heat Treating Oven. Model: AF-850. S/N: 370146. Heat input: 12 kW. Oven dimensions: 36 in. X 22-1/2 in. X 22-1/2 in. Max temperature: 850 °F. Electrical requirements: 460 V, 17 amps, 60 Hz, 3 phase. Howell Motor: 1/3 hp, 1725 rpm, 208-220/440 V, 2.2/1.1 amps, 60 Hz, 3 phase. Unit features a Grieve digital set-point controller, excess temperature control and Eagle signal timers for the blower, heater and damper. Inlets: (1) 3-1/2 in. port with pneumatic knife gate. Overall dimensions: 72 in. L X 42 in. W X 72 in. H.
|
|
Click here for more information (232.8 KB)
|
|
|
Click On Picture
|
Bar Code Scanner
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SGMPB005.a
|
Serial No:
|
|
|
|
Click On Picture
|
Savant SpeedVac Centrifugal Evaporator
|
|
Mfg: Savant
|
Model: SVC-100H
|
|
Stock No: DBBP2202.2a
|
Serial No: 5-87-1785-115
|
|
Savant SpeedVac Centrifugal Evaporator. Model: SVC-100H. S/N: 5-87-1785-115. Electrical: 115 V, 50/60 Hz, 1 amp. Inside dimensions: 10 diameter x 3-1/2 in. H. Vacuum connection. Rotor switch on/off, heater switch on/off. Overall dimensions: 13 in. L x 11-1/4 in. W x 10-1/2 in. H.
|
|
Click here for more information (218.3 KB)
|
|
|
Click On Picture
|
National Appliance Co. Incubator
|
|
Mfg: National Appliance Co.
|
Model:
|
|
Stock No: DBBP2431.a
|
Serial No:
|
|
National Appliance Co. Incubator. Inside dimensions: 12 in. L x 8 in. W x 8 in. H. Capacity of the system: 115/220 V, 4.8/2.5 amps, 550 watts. Door with a protect clear glass. System non explosion proof, chemicals only. Stainless steel holder dimensions: 8-1/4 in. L x 6-1/4 in. W x 3-1/2 in. H. Inlets/outlets: (2) Standard pipe. Control system: indicator light, manual control of temperature, switch on/off. Overall dimensions: 15-1/2 in. L x 13 in. W x 14 in. H
|
|
Click here for more information (152.6 KB)
|
|
|
Click On Picture
|
Energy Monitor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SGMT437.a
|
Serial No:
|
|
|
|
Click On Picture
|
Stainless Steel Product Recovery System
|
|
Mfg: Not Specified
|
Model: PS-441-2812-RSS
|
|
Stock No: SSPN111.3a
|
Serial No: 1431
|
|
Stainless Steel Reclaim Reel (Parts). Model: PS-441-2812-RSS. S/N: 1431. Has the capacity of 14 cu. ft. Previously owned by Borden and used to reclaim lemonade pouches of the following sizes: 3 in. x 5 in. & 2-3/4 in. x 4-1/4 in. Unit has a pulley ratio of 0.2 with a final rpm of 228. Baldor Industrial Motor, 1/2 hp, 1140 rpm, 208-230/480 V, 2.5-2.4/1.2 amps, 60 Hz, 3 phase. Inlets: (1)12-1/2 in. dia. Outlets: (1) 11-3/4 in. dia. with a 21 in. L chute, (1) 12 in. W split chute. Overall dimensions: 48-1/2 in. L x 37 in. W 55 in. H.
|
|
Click here for more information (217.7 KB)
|
|
|
Click On Picture
|
2003 AZO Stainless Steel Vibrating Hopper
|
|
Mfg: AZO
|
Model: 1100
|
|
Stock No: SGMI012.
|
Serial No:
|
|
2003 AZO Stainless Steel Vibrating Hopper. Model: 1100. Type: 402580. Machine number: 043386A-1-023930-00. Feed hopper dimensions: 44 in. diameter x 18 in. H. Cone spreader: 34 in. diameter x 12 in. H. CE Vibrating Motor, Type: JV134-63, 1.07 hp, 1730 rpm, 460 V, 1.65 amps, 60 Hz. Overall dimensions: 62 in. L x 50 in. W x 19 in. H.
|
|
Click here for more information (168.4 KB)
|
|
|
Click On Picture
|
Stainless Steel Hopper
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: QCAI389.1a
|
Serial No:
|
|
Stainless Steel Hoppers, Mfg. n/a. Model, S/N n/a. Inside dimensions 22 in. diameter, 14 in. H. Outlet (1) 8 in. Has a handle for opening and closing with a cloth that closes and opens. Overall dimensions 24 in. diameter, 18 in. H.
|
|
|
|
|
Click On Picture
|
Pick Up Hopper with Stand-15 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SGMI266.
|
Serial No:
|
|
Pick Up Hopper with Stand-15 Gallon. Hopper features an AZO RF series level indicator, Model: 3-LVLP-02439. Inlets: (1) 7 in. dia. inlet with a 12-1/4 in. dia. flange and (8) 7/8 in. dia. attachment holes at a center-to-center distance of 10-1/2 in. Outlets: (4) 2 in. dia. S-line fittings. Overall dimensions: 29 in. L x 19 in. W x 44 in. H.
|
|
Click here for more information (261.8 KB)
|
|
|
Click On Picture
|
Pick-Up Hopper- 25 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNPM138.a
|
Serial No:
|
|
Pick-Up Hopper- 25 Gallon. 3-Leg support. Filtration capability. Inlets: (1) 10 in. dia. infeed port. Outlets: (1) 2-1/2 in. dia. discharge port. Overall dimensions: 34 in. L x 27 in. W x 51-1/2 in. H.
|
|
Click here for more information (161.5 KB)
|
|
|
Click On Picture
|
Pick-Up Hopper- 25 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNPM139.a
|
Serial No:
|
|
Pick-Up Hopper- 25 Gallon. 3-Leg support. Filtration capability. Inlets: (1) 10 in. dia. infeed port. Outlets: (1) 2-1/2 in. dia. discharge port. Overall dimensions: 34 in. L x 27 in. W x 51-1/2 in. H.
|
|
Click here for more information (166.7 KB)
|
|
|
Click On Picture
|
Pick-Up Hopper- 25 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNPM140.a
|
Serial No:
|
|
Pick-Up Hopper- 25 Gallon. 3-Leg support. Filtration capability. Inlets: (1) 10 in. dia. infeed port. Outlets: (1) 2-1/2 in. dia. discharge port. Overall dimensions: 34 in. L x 27 in. W x 51-1/2 in. H.
|
|
Click here for more information (186.9 KB)
|
|
|
Click On Picture
|
Cyclone Shot Blast Cabinet
|
|
Mfg: Cyclone
|
Model:
|
|
Stock No: DRGP112.1
|
Serial No:
|
|
Cyclone Shot Blast Cabinet. With shop vac. Dimensions 36 in. x 24 in.
|
|
|
|
|
Click On Picture
|
Stainless Steel Screened Rack
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDPH025.2a
|
Serial No:
|
|
Stainless Steel Screened Rack with (5) Shelves. Dimensions 56 in. L x 24 in. W x 34 in. H.
|
|
|
|
|
Click On Picture
|
Stainless Steel Funnel Hopper
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: EEGC113.2a
|
Serial No:
|
|
Stainless Steel Funnel Hopper. 3 ft. x 2 in.
|
|
|
|
|
Click On Picture
|
Stainless Steel Hopper with Rotary Airlock
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDBV072.4
|
Serial No:
|
|
Stainless Steel Hopper with Rotary Airlock. Infeed hopper dimensions: 36 in. L x 36 in. W. Hopper uses a 36 in. L x 36 in. W guard. (2) Syntron Electric Vibrators, Model: V-20, S/N's: C-12708 and C-12935, electrical requirements: 115 V, 2.0 amps, 60 Hz. Baldor Industrial Motor, 1/2 hp, 1725 rpm, 115-208/230 V, 60 Hz. Reliance Electric Tigear 150 Gear Reducer, 20 ratio, 86.25 rpm (final). Inlets: (4) 1-1/2 in. dia. S-line fittings, (3) 6 in. dia. feed ports, (1) 8 in. dia. infeed (airlock). Outlets: (2) 2 in. dia. S-line fittings. Overall dimensions: 39-1/2 in. L x 39-1/2 in. W x 60 in. H.
|
|
Click here for more information (315.2 KB)
|
|
|
Click On Picture
|
Dezurik Knife Gate
|
|
Mfg: Dezurik
|
Model: 8
|
|
Stock No: SNPM106.a
|
Serial No: 9138677
|
|
Dezurik Knife Gate. Size: 8. S/N: 9138677. Gate/liner. 304 stainless steel. Maximum temperature: 220 °F. Maximum cylinder pressure: 100 psi. Inlets/outlets: (2) 18 in. dia. Overall dimensions: 4 in. L x 41 in. W x 15 in. H.
|
|
Click here for more information (209.3 KB)
|
|
|
Click On Picture
|
Blue Cardboard Container
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: BAOT125A.4a
|
Serial No:
|
|
Blue Cardboard Container. Size: 24 ft. L x 7 ft. W.
|
|
|
|
|
Click On Picture
|
Fraiser Whiz Lift
|
|
Mfg: Fraiser
|
Model:
|
|
Stock No: SSPN204.a
|
Serial No:
|
|
|
|
Click On Picture
|
Wire Basket
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: QCAI430.a
|
Serial No:
|
|
|
|
Click On Picture
|
K-Tron Hood
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNPM058.1
|
Serial No:
|
|
(2) K-Tron Hood. Outer lip has a 1-1/2 in. wide lip and (10) 1/4 in. dia. attachment holes and can be mated to any flat surface. Inlets: (1) 31 in. L x 15 in. W x 21 in. H infeed. Outlets: (1) 6 in. dia. port. Overall dimensions: 33-1/2 in. L x 18 in. W x 23 in. H.
|
|
|
|
|
Click On Picture
|
Portable Man Lift
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDNP312.3
|
Serial No:
|
|
|
|
Click On Picture
|
Up-Right Flying Tiger Vertical Lift
|
|
Mfg: Not Specified
|
Model: F-5121
|
|
Stock No: HDNP759.7
|
Serial No: 815
|
|
Up-Right Flying Tiger Vertical Lift, Model F-5121, S/N 815, 21 ft., 410 lbs.
|
|
|
|
|
Click On Picture
|
Stainless Steel Roller Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: JMB006a
|
Serial No:
|
|
Stainless Steel Roller Conveyor. Number of rollers: 14. Roller dimensions: 2-1/4 in. dia. x 2 ft. 8 in. L. Maximum aperture: 2 ft. 1/2 in W. Conveyor infeed/exit height: 1 ft. Overall dimensions: 6 ft. 5-1/2 in. L x 3 ft. 1 in. W x 1 ft. 4 in. H.
|
|
Click here for more information (153.1 KB)
|
|
|
Click On Picture
|
Stainless Steel Chute
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: JMB007a
|
Serial No:
|
|
Stainless Steel Chute. Inlets: (1) 2 ft. 8-1/2 in. L x 2 ft. 2 in. H. Outlets: 2 ft. 5 in. L x 2 ft. 2 in. W. Overall dimensions: 9 ft. 4 in. L x 3 ft. 9 in. W x 2 ft. 10 in. H. Last used in a frozen juice thawing line.
|
|
Click here for more information (159.6 KB)
|
|
|
Click On Picture
|
Zetron Sentri Max. Alarm
|
|
Mfg: Zetron Sentri Max.
|
Model:
|
|
Stock No: HDCD310.4
|
Serial No:
|
|
Zetron Sentri Max. Alarm With Allen Bradley Controls.
|
|
|
|
|
Click On Picture
|
Peck Stow and Wilcox Brake
|
|
Mfg: Pexto
|
Model: G-352-F
|
|
Stock No: GM26.1
|
Serial No: M-3013
|
|
Peck Stow and Wilcox model G-352-F, serial no. M-3013, capacity 10-GA, overall 90 inch height x 92 inch length x 68 inch width.
|
|
|
|
|
Click On Picture
|
Product Saver
|
|
Mfg: Not Specified
|
Model: BE14
|
|
Stock No: GM146.1a
|
Serial No: 2008
|
|
Product saver Model BE 14, serial no. 2008, 62in L x 21in W x 30in H (adjust), Dayton motor 1.5hp 86.25rpm 230-460.
|
|
|
|
|
Click On Picture
|
Aloe Vera Leaf Cubing Machine
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 75.GALO2
|
Serial No:
|
|
Aloe Vera Leaf Cubing Machine. Makes 1 in. long x 1 in. wide cuts. Number of rotating blades: (6) 3 in. dia. Distance between blades: 1 in. Drum blade with (8) cutting knives: 3 in. dia. x 8-1/2 in. L. Distance between blades: 1 in. Maximum leaf width: 6 in. Infeed conveyor belt width: 6 in. W. Discharge conveyor belt width: 7 in. W. Dayton Electric Wash-Down Duty Motor, 1/2 hp, 1725 rpm, 115/230 V, 9/4.5 amps, 60 Hz, single phase. Winsmith D-90 Drive, ratio of 15, 115 rpm (final). Conveyor infeed/exit height: 36 in. Outlets: (1) 29 in. L x 12 in. W discharge chute. Overall dimensions: 6 ft. 2 in. L x 2 ft. 10 in. W x 4 ft. 1 in. H.
|
|
Click here for more information (380.8 KB)
|
|
|
Click On Picture
|
Aloe Vera Leaf Fillet Machine
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 75.GALO3
|
Serial No:
|
|
Aloe Vera Leaf Fillet Machine. Makes 1 in. wide cuts. Number of rotating blades: (6) 3 in. dia. Distance between blades: 1 in. Maximum leaf width: 6 in. Infeed conveyor belt width: 7 in. W. Discharge conveyor belt width: 7 in. W. Magnetek Electric Motor, 1/2 hp, 1725 rpm, 115/208-230 V, 9/3.5-3.6 amps, 60 Hz, single phase. Dayton Drive, ratio of 15.1, 115 rpm (final). Conveyor infeed/exit height: 36 in. Outlets: (1) 10 in. L x 12 in. W product discharge chute, (1) 33 in. L x 8 in. W bi-product discharge chute. Overall dimensions: 8 ft. 4 in. L x 2 ft. 4 in. W x 3 ft. 8 in. H.
|
|
Click here for more information (207.8 KB)
|
|
|
Click On Picture
|
Electric Man Lift
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SLTN148.3a
|
Serial No:
|
|
|
|
Click On Picture
|
Durant Tool Company Stock Straightener
|
|
Mfg: Durant Tool Company
|
Model: SS-18
|
|
Stock No: SHCA1460.a
|
Serial No: 1971
|
|
Durant Tool Company Stock Straightener. Model SS-18. Serial 1971. Width is 18 in. (2) drive rolls, (9) straightening rolls. 2 in. dia rolls. Thickness range is .20-.094 in. The SS series is a un-motorized stock straightener. These units are ideal machines for either manually straightening materials with a hand crank or automatic pull through operations. Overall dimensions: 41 in. L x 33-1/2 in. W x 43-1/2 in. H.
|
|
|
|
| |
