|
|
Click On Picture
|
2004 Chemical Feed System
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC056
|
Serial No:
|
|
2004 Chemical Feed System. (4) Pulsatron and LMI chemical feed pumps
|
|
|
|
|
Click On Picture
|
Waukesha 10 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 10
|
|
Stock No: DNBA068B
|
Serial No: 109112SS
|
|
Waukesha 10 Positive Displacement Pump. Model 10. S/N:109112SS. Flow rate for new pump is 9 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Baldor motor. 3/4 hp, 1140 rpm, 230/460 V, 3.0/1.5 amps, 60 Hz, 3 phase. Pulley ratio: 1.33. Final rpm: 857. Inlets/Outlets: (2) 1" ACME fitting. Overall dimensions: 1 ft. 10 in. L x 1 ft. 9 in. W x 1 ft. 11 in. H. (ACN47a).
|
|
Click here for more information (230.9 KB)
|
|
|
Click On Picture
|
2002 Permian Fabrication & Service Vertical Stainless Steel Heated Tank - 1000 Gallons
|
|
Mfg: Permian Fabrication & Service
|
Model:
|
|
Stock No: GANF138.20
|
Serial No: 3132-D
|
|
2002 Permian Fabrication & Service Vertical Stainless Steel Heated Tank. Approximate capacity: 1000 gallons. Shell thickness: 10 gauge. Head thickness: 10 gauge. Inside straight wall dimensions: 4 ft. 6 in. Dia. x 9 ft. L. Number of coil rows: 7. Coil size: 2 in. Inlets: (2) 2 in. dia. ports, (1) 3/4 in. dia. port, (2) 1 in. dia. ports. Outlets: (1) 2 in. dia. port, (1) 1 in. dia. port, (1) 4 in. opening on top for shaft. Overall dimensions: 6 ft. L x 6 ft. W x 13 ft. 4 in.(ACN350).
|
|
Click here for more information (255.6 KB)
|
|
|
Click On Picture
|
2002 Permian Fabrication & Service Vertical Stainless Steel Heated Tank - 1000 Gallons
|
|
Mfg: Permian Fabrication & Service
|
Model:
|
|
Stock No: GANF139.20
|
Serial No: 3132-E
|
|
2002 Permian Fabrication & Service Vertical Stainless Steel Heated Tank. Approximate capacity: 1000 gallons. Shell thickness: 10 gauge. Head thickness: 10 gauge. Inside straight wall dimensions: 4 ft. 6 in. Dia. x 9 ft. L. Number of coil rows: 7. Coil size: 2 in. Inlets: (2) 2 in. dia. ports, (1) 3/4 in. dia. port, (2) 1 in. dia. ports. Outlets: (1) 2 in. dia. port, (1) 1 in. dia. port, (1) 4 in. opening on top for shaft. Overall dimensions: 6 ft. L x 6 ft. W x 13 ft. 4 in.(ACN350).
|
|
Click here for more information (210.3 KB)
|
|
|
Click On Picture
|
1991 York Shell & Tube Condenser Barrel
|
|
Mfg: York
|
Model:
|
|
Stock No: 200.ACEU853B
|
Serial No: PVC-077, PVC-080
|
|
1991 York Shell & Tube Condenser Barrel. S/N's: PVC-077, PVC-080. Condenser Barrel: Nat’l Board: 321,322. Shell material: Carbon Steel, Shell dia: 16 in. Tube material: copper. Number of passes: 2. Number of tubes: 164. Tube dimensions: 1/2 in. dia. x 8 ft. 2 in. Heat transfer surface area: approx. 175 sq. ft. Tube volume: approx. 50 gallons. MAWP: 350 psi @ -20°F to 250°F. MDMT: -20°F @ 350 psi. Tube Side inlet/outlet: (1) 4 in. dia inlet port. Outlet: (1) 4 in. dia. discharge port. Shell Side inlet/outlet: (1) 2-1/2 in. dia. inlet port, Outlet: (1) 2-1/2 in. dia. discharge port. Overall dimensions: 9 ft. L x 1 ft. 10 in. W x 1 ft. 10 in. H.
|
|
Click here for more information (337.8 KB)
|
|
|
Click On Picture
|
Sorgel Square D Company Insulated Transformer-30 KVA
|
|
Mfg: Sorgel Square D Company
|
Model: 33349-49-112-002
|
|
Stock No: DNBA011C
|
Serial No: 1050254-A-001
|
|
Sorgel Square D Company Insulated Transformer-30 KVA. S/N:1050254-A-001. Style No. 33349-49-112-002. High/low voltage: 480, high/low voltage amps: 36. Hertz: 60. Class: AA. Rise: 302 ° F (150 °C). Insulation: 428° F (220 °C). Type: SO. Total unit weight: 285 lbs. Overall dimensions: 1 ft. 10 in. L x 1 ft. 3-1/2 in. W. x 1 ft. 11 in. H.
|
|
Click here for more information (75.3 KB)
|
|
|
Click On Picture
|
Sorgel Square D Company Insulated Transformer-30 KVA
|
|
Mfg: Sorgel Square D Company
|
Model:
|
|
Stock No: DNBA011B
|
Serial No: 1498492-A-002
|
|
Sorgel Square D Company Insulated Transformer-30 KVA. S/N: 1498492-A-002. Style No. 33344-44-112-001. High/low voltage: 460, high/low voltage amps: 37.6. 60 Hz. Class: AA. Rise: 302 ° F (150 °C). Insulation: 428° F (220 °C). Type: SO. Total unit weight: 295 lbs. Overall dimensions: 1 ft. 10 in. L x 1 ft. 3-1/2 in. W. x 1 ft. 11 in. H.
|
|
Click here for more information (91.6 KB)
|
|
|
Click On Picture
|
Baldor Electric Motor- 5 HP
|
|
Mfg: Baldor
|
Model:
|
|
Stock No: HDWR013B.a
|
Serial No: F0606083349
|
|
Baldor Electric Motor- 5 HP. S/N: F0606083349. Cat. No: M3615T. Spec. No: 36G784T846H1. Motor specifications: 1750 rpm, 208-230/460 V, 15.4-14.2/7.1 amps, 60 Hz, 3 phase. Shaft diameter: 1-1/4 in. Code: K. Nema design: B. Frame: 184T. Enclosure: TEFC. Insulation class: F. Continuous duty. Overall dimensions: 1 ft. 6 in. L x 10-1/2 in. W x 9 in. H.
|
|
Click here for more information (88.7 KB)
|
|
|
Click On Picture
|
APV air actuated 3-way valve
|
|
Mfg: APV
|
Model: SW43T20B1V3TT
|
|
Stock No: BZCH543A
|
Serial No:
|
|
APV air actuated 3-way valve. Model: SW43T20B1V3TT. Maximum air pressure: 150 psi. Minimum air pressure: 70 psi. Inlets/Outlets: (3) 2 in. S-Line fitting. Overall dimensions: 7-1/4 in. L x 5 in. W x 1 ft. 7-1/4 in. H.
|
|
Click here for more information (113.5 KB)
|
|
|
Click On Picture
|
Baldor Electric Motor- 1-1/2 HP
|
|
Mfg: Baldor
|
Model:
|
|
Stock No: HDWR013A.a
|
Serial No: F0602083243
|
|
Baldor Electric Motor- 1-1/2 HP. S/N: F0602083243. Cat. No: EM3584T. Spec. No: 05C001W659E7. Motor specifications: 1740 rpm, 208-230/460 V, 4.2-4/2 amps, 60 Hz, 3 phase. Shaft diameter: 1 in. Code: K. Nema design: B. Frame: 145T. Insulation class: F. Enclosure: TEFC. Continuous duty. Overall dimensions: 1 ft. L x 10 in. W x 7 in. H.
|
|
Click here for more information (89.7 KB)
|
|
|
Click On Picture
|
RVS Ammonia Surge Drum - 9 Gallon
|
|
Mfg: RVS
|
Model:
|
|
Stock No: MDBC261C
|
Serial No: 87077
|
|
RVS Ammonia Surge Drum. S/N: 87077. Nat'l Bd: 874. Approximate capacity: 9 gallon. Inside straight wall dimensions: 9-1/2 in. dia. x 2 ft. 4 in. L. Refrigerant: R-717. MAWP: 300 PSI @ 350° F. MDMT: - 20° F @ 300 PSI. Inlets/outlets: (2) 3 in. dia. ports. Overall dimensions: 4 ft. 3 in. L x 2 ft. 5 in. W x 1 ft. 11 in. H.
|
|
Click here for more information (88.4 KB)
|
|
|
Click On Picture
|
E. L. Nickell Ammonia Surge Drum - 13 Gallon
|
|
Mfg: EL Nickell
|
Model:
|
|
Stock No: MDBC263C
|
Serial No: 13119
|
|
E. L. Nickell Ammonia Surge Drum. S/N: 13119. Nat'l Bd: 11148. Approximate capacity: 13 gallon. Inside straight wall dimensions: 11-1/2 in dia. x 2 ft. 4 in. L. Refrigerant: Ammonia. MAWP: 250 PSI @ 650° F. MDMT: - 20° F @ 250 PSI. Inlets/outlets: (2) 3 - 1/2 in. dia. ports. Overall dimensions: 4 ft. 7 in. L x 2 ft. 4 in. W x 1 ft. 10 in. H.
|
|
Click here for more information (149.6 KB)
|
|
|
Click On Picture
|
E. L. Nickell Ammonia Surge Drum - 13 Gallon
|
|
Mfg: EL Nickell
|
Model:
|
|
Stock No: MDBC264C
|
Serial No: 13120
|
|
E. L. Nickell Ammonia Surge Drum. S/N: 13120. National Bd. No. 11149. Approximate capacity: 13 gallons. Inside straight wall dimensions: 11-1/2 in dia. x 2 ft. 4 in. L. Refrigerant: R-717. MAWP: 250 PSI @ 650° F. MDMT: - 20° F @ 250 PSI. Inlets/outlets: (2) 3-1/2 in. dia. ports. Overall dimensions: 4 ft. 3 in. L x 2 ft. 11 in. W x 1 ft. 3 in. H.
|
|
Click here for more information (147.7 KB)
|
|
|
Click On Picture
|
Ingersoll-Rand Centrifugal Pump
|
|
Mfg: Ingersoll Rand
|
Model: A 0462-5129
|
|
Stock No: RGMP281D
|
Serial No: 3RVS-7-1/2
|
|
Ingersoll-Rand Centrifugal Pump. Model: A 0462-5129. Type: 3RVS-7-1/2. Flow rate for new pump is 360 gpm with required horsepower and pressure. Discuss with sales person your process and product to determine if this refurbished pump should handle your specific duty. Impeller diameter: 4.875 in. Hydrostatic test pressure: 100 psi. Seal: 10043. General Electric motor, 7-1/2hp, 3520/2930 rpm, 208-220/440 V, 19.6/9.8; 20/10 amps, 60/50 Hz, 3 phase. Inlet: (1) 4-1/2 in. dia. port. Outlet: (1) 2-1/2 in. dia. port. Overall dimensions: 2 ft. 4 in. L x 1 ft. 1 in. W x 1 ft. 1 in. H.
|
|
Click here for more information (192.9 KB)
|
|
|
Click On Picture
|
Aurora 341A BF Centrifugal Pump
|
|
Mfg: Aurora
|
Model: 341A BF
|
|
Stock No: RGMP281C
|
Serial No: 02-450295
|
|
Aurora Centrifugal Pump. S/N: 02-450295. Type: 341A BF. Size: 5x6x11. Flow rate for new pump is 840 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine is this refurbished pump should handle your specific duty. 15 hp electric motor, 1750 rpm, 230/460V. Inlet: (1) 6 in. dia. flanged port. Outlet: (1) 5 in. dia. flanged port. Estimated weight: 480 lbs. Overall dimensions: 2 ft. 3 in. L x 1 ft. 10 in. W x 1 ft. 6 in. H. (ACN37)
|
|
Click here for more information (169.4 KB)
Click here for pump curve (554.7 KB)
|
|
|
Click On Picture
|
RVS Ammonia Surge Drum – 15 Gallon
|
|
Mfg: RVS
|
Model:
|
|
Stock No: MDBC260C
|
Serial No: 87074
|
|
RVS Ammonia Surge Drum. S/N: 87074. Nat'l Bd: 871. Approximate capacity: 15 gallons. Inside straight wall dimensions: 1 ft. dia. x 2 ft. 5 in. L. Refrigerant: R-717. MAWP: 300 PSI @ 350° F. MDMT: -20° F @ 300 PSI. Inlets: (1) 4 in. dia. ports. Outlets: (1) 2-1/2 in. dia. port. Overall dimensions: 6 ft. 7 in. L x 1 ft. 9 in. W x 1 ft. 3 in. H.
|
|
Click here for more information (163.6 KB)
|
|
|
Click On Picture
|
Ammonia Surge Drum - 26 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC259C
|
Serial No: OS-1800
|
|
Ammonia Surge Drum. S/N: OS-1800. Approximate capacity: 26 gallons. Inside straight wall dimensions: 1 ft. 1 in dia. x 3 ft. 6 in. L. Refrigerant: R-717. MAWP: 250 PSI @ 650° F. MDMT: - 20° F @ 250 PSI. Head thickness: .250 in. Shell thickness: .250 in. Inlets/outlets: (2) 3-1/2 in. dia. ports. Overall dimensions: 5 ft. L x 2 ft. 9 in. W x 1 ft. 2 in. H.
|
|
Click here for more information (122.3 KB)
|
|
|
Click On Picture
|
Ammonia Surge Drum - 13 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC258C
|
Serial No: OS-1766
|
|
Ammonia Surge Drum. S/N: OS-1766. Approximate capacity: 13 gallons. Inside straight wall dimensions: 10 in dia. x 3 ft. 2 in. L. Refrigerant: R-717. MAWP: 250 PSI @ 650° F. MDMT: - 20° F @ 250 PSI. Head thickness: .250 in. Shell thickness: .250 in. Inlets/outlets: (2) 2 - 1/2 in. dia. ports. Overall dimensions: 4 ft. 8 in. L x 2 ft. 7 in. W x 1 ft. H.
|
|
Click here for more information (107.7 KB)
|
|
|
Click On Picture
|
Ammonia Surge Drum - 26 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC257C
|
Serial No: OS-1806
|
|
Ammonia Surge Drum. S/N: OS-1806. Approximate capacity: 26 gallons. Inside straight wall dimensions: 1 ft. 1 in dia. x 3 ft. 7 in. L. Refrigerant: R-717. MAWP: 250 PSI @ 650° F. MDMT: - 20° F @ 250 PSI. Head thickness: .250 in. Shell thickness: .250 in. Inlets/outlets: (2) 1 ft. 2 in. dia. ports. Overall dimensions: 4 ft. 10 in. L x 3 ft. 4 in. W x 1 ft. 4 in. H.
|
|
Click here for more information (138.3 KB)
|
|
|
Click On Picture
|
Ammonia Surge Drum - 16 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC262C
|
Serial No: 0S-1764
|
|
Ammonia Surge Drum. S/N: 0S-1764. Approximate capacity: 16 gallons. Inside straight wall dimensions: 11 in dia. x 3 ft. 2 in. L. Refrigerant: R-717. MAWP: 250 PSI @ 650° F. MDMT: - 20° F @ 250 PSI. Head thickness: .250 in. Shell thickness: .250 in. Inlets/outlets: (2) 2 in. dia. ports. Overall dimensions: 5 ft. L x 3 ft. W x 1 ft. H.
|
|
Click here for more information (123.4 KB)
|
|
|
Click On Picture
|
Ozaf Mechanical Feeder - (96) Compartments
|
|
Mfg: Ozaf
|
Model:
|
|
Stock No: NOI8048
|
Serial No:
|
|
Ozaf Mechanical Feeder. Unit has (96) compartments and is constructed of polyethylene. Inside straight wall dimensions: 3 ft. 11 in. dia. x 9 in. H. Infeed chute dimensions: 1 ft. 1/2 in. L x 5 in. W. x 5 in. H. (2) Penta DC motors. Model: MP100A20. S/N: ITN. Power supply: 180 V, 2 amps, 60 Hz, single phase. Mechanical feeders make it possible to convey and unscramble different types of items in a wide range of shapes such as caps, ring nuts, pumps, atomizers. Infeed height: 3 ft. Exit height: 4 ft. 3 in. Overall dimensions: 5 ft. 5 in. L x 4 ft. 5 in. W x 5 ft. 3 in. H.
|
|
Click here for more information (318.7 KB)
|
|
|
Click On Picture
|
Ladder Safety Cage
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC256
|
Serial No:
|
|
(2) Pcs. Ladder Safety Cage
|
|
|
|
|
Click On Picture
|
Carlyle 6-Cylinder Freon Compressor
|
|
Mfg: Carlyle
|
Model: 06 CY 550E- 103
|
|
Stock No: MDFC216.1
|
Serial No: 1696HE 1828
|
|
Carlyle 6-Cylinder Freon Compressor. Model: 06 CY 550E- 103. S/N: 1696HE 1828. 208/230 V, 3 phase
|
|
|
|
|
Click On Picture
|
Pallet Rack Beds
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC181.1a
|
Serial No:
|
|
(28) Pallet Rack Beds - 46" W x 43" W
|
|
|
|
|
Click On Picture
|
Cage Racks
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC180.1
|
Serial No:
|
|
(2) Cage Racks with Spare Shelves
|
|
|
|
|
Click On Picture
|
2000 Niagara Blower Company “No-Frost”® Concentrator
|
|
Mfg: Niagara
|
Model: A40E
|
|
Stock No: MDFC066.32a
|
Serial No: 00 -12983
|
|
2000 Niagara Blower Company “No-Frost”® Concentrator. Model: A40E. (1) Marathon electric motor, .75 hp, 3450 rpm, 208-230/460 V, 60 Hz, 3 phase. (1) Marathon electric motor, 1/3 hp, 1725 rpm, 208-230/460 V, 60Hz, 3 phase. No-Frost® technology offers Glycol based refrigeration defrost and liquid desiccant dehumidification and is ideal for processing, packaging, and storage applications where consistent, frost free conditions are required. Features include: Permanent inhibition of 99.9% of airborne pathogens, moisture absorption from the air stream, and a sanitary, frost-free coil. Inlet: (1) 1 in. dia. Port. Outlets: (1) 1 in. dia. port. Overall dimensions: 5 ft. L x 3 ft. 5 in. W x 6 ft. H. (ACN560)
|
|
Click here for more information (311.3 KB)
Click here for Niagara "No-Frost" System Specs (2,573.3 KB)
|
|
|
Click On Picture
|
48" Power Louver
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC064.0
|
Serial No:
|
|
|
|
Click On Picture
|
48 in Power Louver
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC063.0
|
Serial No:
|
|
|
|
Click On Picture
|
48" Power Louver
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC062.0
|
Serial No:
|
|
|
|
Click On Picture
|
Bell and Gossett Circulating Pump
|
|
Mfg: Bell & Gossett
|
Model:
|
|
Stock No: MDFC052.1a
|
Serial No:
|
|
Bell and Gossett Circulating Pump 1,000 GPM 25 hp with 6" Head
|
|
|
|
|
Click On Picture
|
E. L. Nickell Horizontal Ammonia Receiver – 42 in. Dia. x 18 ft. L
|
|
Mfg: E. L. Nickell
|
Model:
|
|
Stock No: MDFC050.5
|
Serial No: 30837
|
|
E.L Nickell Horizontal Ammonia Receiver. Approximate capacity: 1,375 gallons. Inside straight-wall dimensions: 18 ft. L x 3 ft. 6 in. dia. MAWP: 250 psi @ 650 ºF. MDMT: -20 ºF @ 250 psi. Head thickness: .297. Shell thickness: 7/16 in. Radius: 2:1 elliptical ends. Inlets: (1) 3 in. dia. port, (2) 2 in. dia. ports, (1) 4 dia. port. Outlets: (1) 4 in. dia. port. (5) 2 in. dia. ports. Overall dimensions: 20 ft. L x 5 ft. 11 in. W x 8 ft. H.
|
|
Click here for more information (185.1 KB)
|
|
|
Click On Picture
|
1997 Phillips Ammonia Dump System
|
|
Mfg: Phillips
|
Model:
|
|
Stock No: MDFC049.3
|
Serial No: WPD97019
|
|
1997 Phillips Ammonia Dump System. S/N: WPD97019. Board No. 7693. Complete with Viking Pump, Valves and Manifold
|
|
|
|
|
Click On Picture
|
2004 Baltimore Aircoil Company Evaporative Condenser – 451 Tons
|
|
Mfg: BAC
|
Model: VC2-451
|
|
Stock No: MDFC047.100
|
Serial No: U041606901
|
|
2004 Baltimore Aircoil Company Evaporative Condenser. Model: VC2-451. Rated nominal capacities: 451 tons using R-22 at 40ºF suction, 78ºF wet bulb, and 105ºF condensing temperatures, and 320 tons using R-717 at 20ºF suction, 78ºF wet bulb, and 96.3ºF condensing temperatures. Number of centrifugal fans: 2. Fan diameter: 5 ft. 4 in. Fan motor: 25 hp, 3 phase. Inlets: (2) 1 ft. 8 in. manways, (1) 6 in. dia. port, (2) 4 in. dia. port. Outlets: (1) 6 in. dia. port, (2) 4 in. dia. ports. Overall dimensions: 13 ft. 4 in. L x 11ft. 10 in. W. x 14ft. 5 in. H.
|
|
Click here for more information (510.5 KB)
|
|
|
Click On Picture
|
Unused 2006 Enersys Pro Series Battery Wash Station – 6000 lb. Capacity
|
|
Mfg: Enersys
|
Model: E-BWS-RB
|
|
Stock No: BACT1504.6
|
Serial No: CEC0221
|
|
Unused 2006 Enersys Pro Series Battery Wash Station. Model: E-BWS-RB. Semi-automatic battery wash station with a weight capacity of 6000 lbs. This unit will handle most industrial electric lift truck and pallet jack 48 volt batteries. Wash booth is constructed of 14 gauge stainless steel. Booth inside dimensions: 3 ft. 9 in. L x 3 ft. 10 in. W x (open top). Access door size: 3 ft. 7 in. W. Unit allows for roll in or overhead loading of batteries. Wash flow rate: 5 gpm at 100 psi. Electrical requirements: 120 V. Features include: acid proof rollers with SS shafts, non-conductive curtain, removable SS trash screen, automatic low water shut off, digital readout pH indicator, push button start-up, manual wash wand, automatic pump shut off with wash wand release, ground fault circuit protection and automatic neutralizer dispensing. Clear PVC settling tank. Model: E-ST-100. PVC sediment tank. Never unpacked or put into service. (ACN118).
|
|
Click here for specifications (47.5 KB)
Click here for more information (53.7 KB)
|
|
|
Click On Picture
|
Baader Fish Skinner
|
|
Mfg: Baader
|
Model: 47
|
|
Stock No: MDFC038.3a
|
Serial No: 1062090047
|
|
Baader Fish Skinner. Type 47. S/N: 1062090047. Complete with 8" W Conveyor
|
|
|
|
|
Click On Picture
|
1998 JBT FoodTech FMC Fresh n Squeeze® Multi-Fruit Juicer
|
|
Mfg: JBT FoodTech
|
Model: MFJ-POS
|
|
Stock No: MDFC031.1
|
Serial No: 81 003002
|
|
1998 JBT FoodTech FMC Fresh'n Squeeze® Multi-Fruit Juicer. Model: MFJ-POS. Approximate Processing capacity: 80-120 quarts / hr., or 20 fruit / min. Electrical Requirements (USA): 115 volt. As a juicer that achieves the highest yields at reasonable speeds, the unique design of the Fresh'n Squeeze® allows the handling of most of the world's citrus fruit varieties and those including oranges, grapefruit, lemons, limes and tangerines. Overall dimensions: 2ft. 8 in. L x 2 ft. 3 in. W x 5 ft. 7 in. H.(ACN161)
|
|
Click here for product brochure (956.2 KB)
|
|
|
Click On Picture
|
Biro Vertical Meat Band Saw
|
|
Mfg: Biro
|
Model: 3334
|
|
Stock No: MDFC030.2a
|
Serial No:
|
|
Biro Vertical Meat Band Saw. Model: 3334.
|
|
|
|
|
Click On Picture
|
Biro Vertical Meat Band Saw
|
|
Mfg: Biro
|
Model: 3334
|
|
Stock No: MDFC028.2a
|
Serial No: 27984
|
|
Biro Vertical Meat Band Saw. Model: 3334. S/N: 27984.
|
|
|
|
|
Click On Picture
|
Teflon Cutting Boards
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC026.a
|
Serial No:
|
|
(5) Teflon Cutting Boards. 30" x 29" and 24" x 18"
|
|
|
|
|
Click On Picture
|
Stainless Steel Table
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDFC016.1
|
Serial No:
|
|
Stainless Steel Table with Rounded Edges. 6' L x 30" W
|
|
|
|
|
Click On Picture
|
Aurora Centrifugal Pump
|
|
Mfg: Aurora
|
Model: 96-15015
|
|
Stock No: RGMP404D
|
Serial No: 344A BF
|
|
Aurora Centrifugal Pump. Model: 96-15015. Type: 344A BF. Size: 5x6x9.9. Flow rate for new pump is 835 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Impeller diameter: 5 in. Marathon electric motor, 20/15 hp, 1750/1460 rpm, 208-230/460;190/380 V, 56.4-53/26.5;48/24 amps, 60/50 Hz, 3 phase. Inlet: (1) 6 in. dia. flanged port. Outlet: (1) 5 in. dia. flanged port. Overall dimensions: 2 ft. 8 in. L x 1 ft. 11 in. W x 1 ft. 6 in. H.
|
|
Click here for more information (381.0 KB)
|
|
|
Click On Picture
|
Hunter Filtration
|
|
Mfg: Hunter
|
Model: HF80
|
|
Stock No: MDFC005.a
|
Serial No: 17102
|
|
Hunter Filtration. Model: HF80. S/N: 17102.
|
|
|
|
|
Click On Picture
|
Evapco Evaporative Condenser – 900 Tons
|
|
Mfg: Evapco
|
Model: PMCA-900
|
|
Stock No: KWBF001
|
Serial No: 8932470
|
|
Evapco Evaporative Condenser. Model: PMCA-900. Nominal capacity: 900 tons using R-22 with a 105ºF condensing temperature, 40ºF suction temperature and a 78ºF wet bulb temperature, and 638 tons with R-717 with a 96.3ºF condensing temperature, 20ºF suction temperature, and a 78ºF wet bulb temperature. (4) Axial fans, 5 ft. diameter. Fan displacement: 141,400 cfm. Belt no: 2B-133. (2) U.S. Electrical fan motors, 20 hp, 1770 rpm, 208-230/460V. Inlets: (2) 1 ft. 8 in. man ways, (2) 6 in. dia. port. (4) 4 in. dia. ports, (1) 3 in. dia. port. Outlets: (4) 4 in. dia. port, (1) 3 in. dia. port. Overall dimension: 27 ft. 4 in L x 10 ft. W x 13 ft. 7 in. H.(ACN890).
|
|
Click here for specifications (713.9 KB)
Click here for more information (273.3 KB)
|
|
|
Click On Picture
| | |
