|
|
Click On Picture
|
Chemineer Greerco High Shear Reversible Homomixer
|
|
Mfg: Chemineer Greerco
|
Model: 3HR 95
|
|
Stock No: MRDC1165.4
|
Serial No: 0312-3781 M/C
|
|
Chemineer Greerco High Shear Reversible Homomixer. Model: 3HR 95. Rated capacity: 250 gallons. Mixer features: SS wetted parts, SS cross support, Stellite® bushings, 440 hardened SS rotor-stator, (2) 3 ¾ in. dia. impellers, shaft length: 3 ft. 10 in. Explosion proof Reliance electric motor, 10 hp, 3500 rpm, 230/460 V, 25/12.5 amps, 60 Hz, 3 phase. In addition to being reversible, The design of Greerco high shear mixers exceeds the high quality standards necessary to achieve optimal process results and withstand the rigors of difficult processes that require high shear mixing. Typical applications include solids incorporation, homogeneous dispersions, rapid blending, and particle size reduction. Overall dimensions: 3 ft. 5-3/8 in. L x 1 ft. 7 in. W x 7 ft. 6 in. H.(ACN160).
|
|
Click here for more information (675.5 KB)
|
|
|
Click On Picture
|
High Shear Mixer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SPPP465
|
Serial No:
|
|
High Shear Mixer. Carbon steel frame with stainless steel impeller. Impeller diameter: 9 in. Shaft dimensions: 1-1/2 in. dia. x 2 ft. 7 in. H. General Electric Motor, 10 hp, 1735 rpm, 220/440 V, 26.8/13.4 amps, 60 Hz, 3 phase. Overall dimensions: 6 ft. 10 in. L x 2 ft. 7 in. W x 6 ft. 2 in. H.
|
|
Click here for more information (172.6 KB)
|
|
|
Click On Picture
|
Stainless Steel Motorized Power Mixer with Centrifugal Pump
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DSVT015B
|
Serial No:
|
|
Stainless Steel Motorized Power Mixer with Centrifugal Pump. Propeller diameter: 3 in. Impeller diameter: 5-7/8 in. ABB Motor, 1 hp at 220/380-240/420 V, 1380/1400 rpm, 50 Hz, 3 phase or 1.2 hp at 250/440-280/480 V, 1670/1690 rpm, 60 Hz, 3 phase. Inlets: (1) 1-1/2 in. dia. suction port. Outlets: (2) 3/4 in. dia. FNPT fittings. Overall dimensions: 1 ft. 1 in. L x 1 ft. W x 3 ft. 6 in. H.
|
|
Click here for more information (237.9 KB)
|
|
|
Click On Picture
|
Philadelphia Mixers Pneumatic Stainless Steel Mixer
|
|
Mfg: Philadelphia Mixers
|
Model: PGA-6-2
|
|
Stock No: DBGV324.1a
|
Serial No: 91AKG0819
|
|
Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-6-2. This portable, variable speed, clamp on mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation. Pneumatic motor: 2.0 hp, 1750 rpm. Gear drive ratio: 5:1. Final rpm: 350. Impeller diameter: 12-1/2 in. Air inlet: (1) 3/8 in. push on air hose fittings. Shaft dimensions: 4 ft. L x 1-1/4 in. diameter. Overall dimensions: 1 ft. 9-1/4 in. L x 1 ft. 1/2 in. W x 5 ft. 3-5/8 in. H. (ACN32)
|
|
Click here for more information (221.5 KB)
|
|
|
Click On Picture
|
Philadelphia Mixers Pneumatic Stainless Steel Mixer
|
|
Mfg: Philadelphia Mixers
|
Model: PGA-6-2
|
|
Stock No: DBGV325.1a
|
Serial No: 96AKG1198
|
|
Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-6-2. This portable, variable speed, clamp on mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation. Impeller diameter: 12-1/2 in. Pneumatic motor: 2.0 hp, 1750 rpm. Gear drive ratio: 5:1. Final rpm: 350. Air inlet: (1) 3/8 in. push on air hose fittings. Shaft dimensions: 4 ft. 3-1/2 in. L x 1-1/4 in. diameter. Overall dimensions: 10-5/8 in. L x 1 ft. 1/2 in. W x 5 ft. 6-1/4 in. H. (ACN32)
|
|
Click here for more information (164.5 KB)
|
|
|
Click On Picture
|
Philadelphia Mixers Pneumatic Stainless Steel Mixer
|
|
Mfg: Philadelphia Mixers
|
Model: PGA-8-3
|
|
Stock No: DBGV326.1
|
Serial No: 81AKH0503
|
|
Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-8-3. Portable clamp on mixer. (3) adjustable and collapsible impellers. Impeller diameters: 8-1/2 in. dia., 12-3/4 in. dia., 13-3/4 in. dia. Mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation. Speeds can be varied by means of the air control valve. Pneumatic motor: 2.0 hp, 1750 rpm air motor. Gear drive ratio: 5:1. Final rpm: 350. Air inlet: (1) 3/8 in. push on air hose fittings. Shaft dimensions: 3 ft. 6-3/8 in. L x 1-1/4 in. diameter. Overall dimensions: 9-3/8 in. L x 1 ft. 2-1/2 in. W x 4 ft. 10 in. H. (ACN35)
|
|
Click here for more information (223.4 KB)
|
|
|
Click On Picture
|
Philadelphia Mixers Pneumatic Stainless Steel Mixer
|
|
Mfg: Philadelphia Mixers
|
Model: PGA-8-3
|
|
Stock No: DBGV326B.1
|
Serial No: 85AKH0720
|
|
Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-8-3. This portable, variable speed, clamp on mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation.. Impeller diameter: 12-1/2 in. Speeds can be varied by means of the air control valve. Pneumatic motor: 2.0 hp, 1750 rpm. Gear drive ratio: 5:1. Final rpm: 350. Air inlet: (1) 3/8 in. push on air hose fittings. Shaft length: 3 ft. 1-1/4 in. Shaft diameter: 1-1/4 in. Overall dimensions: 1 ft. 4 in. L x 8-1/4 in. W x 4 ft. 5-1/2 in. H. (ACN35)
|
|
Click here for more information (176.4 KB)
|
|
|
Click On Picture
|
Vertical Mixer/Blender
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 20.BR1152.1
|
Serial No:
|
|
Vertical Mixer/Blender. Stainless Steel. Shaft: 36 in; blade: 12 in, diameter. Pneumatic piston to raise and lower blades. Roller conveyors to receive containers. Delta power hydraulic motor, Model DM23, with circuit pak hydraulic power unit. Transmission: 1½ hp. Gear motor: 220 V. Output: 219 rpm. Overall dimensions: 60 in. L x 48 in. W x 120 in. H. This machine is manual operation but can be converted to automate, if desired. (XMR46a)
|
|
Click here for more information (276.8 KB)
|
|
|
Click On Picture
|
Shar Systems Inc. (Disperser) Mixer with Mixing Tank – 370 Gallons
|
|
Mfg: Shar Systems Inc.
|
Model: S-300
|
|
Stock No: MASH059
|
Serial No: 215972
|
|
Shar Systems Inc. (Disperser) Mixer with Mixing Tank. Model: S-300. Rated tank capacity: 370 gallons. Inside dimensions of tank: 4 ft. dia. x 4 ft. straight wall. Tank has (2) fixed, rolling casters and one that swivels for ease of movement. Impeller blade dia: 1 ft. 3 in. Westinghouse motor: 30 Hp, 1770 rpm, 230/460 V, 73.4/36.7 A, 60 Hz, 3 Phase. Control panel. Features include: a push-button controller with variable speed settings and a push-button hydraulic lift with 360 degree rotation. Reliance Electric motor: ¾ Hp, 1725 Rpm, 230/460 V, 3.44/1.72 A, 60 Hz, 3 Phase. Applications include the chemical, paint and plastics industries. This disperser saw duty with Crane Plumbing as a mixer for porcelain glaze in one of their manufacturing facilities. Overall tank dimensions: 5 ft. L x 4 ft. 7 in. W x 4 ft. 8-1/4 in. H. Mixer dimensions: 6 ft. 7 in. L x 2 ft. 8 in. W x 7 ft. 4 in. H.(ACN238).
|
|
Click here for drawings (88.2 KB)
Click here for more information (266.8 KB)
|
|
|
Click On Picture
|
Agitator/Mixer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: OI15
|
Serial No:
|
|
|
|
Click On Picture
|
Stainless Steel Double-Action Mixer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNSL007.3a
|
Serial No:
|
|
Stainless Steel Double-Action Mixer. Tilting capability. Can hold a container that is 24 in. dia. x 32 in. H. Mixer is equipped with a shear propeller mounted to a 13 in. H. shaft and a dispersing propeller on a 14 in. H. shaft. Base has (4) casters for easy positioning. Final propeller speeds for shear/dispersing propellers: 1150/354 rpm. Baldor Industrial Motor, 2 hp, 1725 rpm, 206-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase. Overall dimensions: 38 in. L x 22 in. W x 42 in. H.
|
|
Click here for more information (272.5 KB)
|
|
|
Click On Picture
|
Cono Agitator Drive
|
|
Mfg: Cono
|
Model: SHV-7400C-AJD
|
|
Stock No: HEC014.
|
Serial No: 23807
|
|
Cono Agitator Drive. Model: SHV-7400C-AJD. S/N: 23807. Bridge mounted. Ratio: 10.1. Final rpm: 172. Motor pulley diameter: 10 in. Drive pulley diameter: 16 in. dia. Reliance Electric Motor, 5 hp, 1,740 rpm, 230/410 V, 14.2/7.1 amps, 60 Hz, 3 phase. Overall dim: 76 in. L x 19 in. W x 22 1/2 in. H.
|
|
Click here for more information (285.9 KB)
|
|
|
Click On Picture
|
Morehouse Cowles Dissolver Disperser
|
|
Mfg: Morehouse Cowles
|
Model: 510VHV
|
|
Stock No: SIBI148.11
|
Serial No: C576S
|
|
Morehouse Cowles Dissolver Disperser. Model: 510VHV. Stainless steel mixer: 1-5/8 in. shaft dia. 10-1/8 in. impeller dia. Louis Allis Motor: 10 Hp, 1725 rpm, 230/460 volts, 24.4/12.2 amps, 60 Hz, 3 phase. Drive rated at 10 HP at 1300 rpm. Belts are C-90 super-oil-heat. Resistant-static conducting. (2) 3-7/8 in. sprockets. (2) 8-3/8 in. driver pulleys. (1) 8-3/8 in. driven pulley. (1) Allen Bradley motor control box, which contains: (1) Allen Bradley transformer: 0.075 K.V.A., primary voltage: 240-480/220-440 V, secondary voltage 120/110, 60/50-60 HZ. (1) Westinghouse Electric contactor, 200-230/460 V, 7-1/2/10 hp. Air tank: WESSELS. W.P. 150 P.S.I. Temp. 650 ˚F. Overall dimensions: 5 ft. 2-3/4 in. L. x 1 ft. 9 in. W. 6 ft. 6-1/2 in. H.(ACN151).
|
|
Click here for more information (938.7 KB)
|
|
|
Click On Picture
|
Bottom and Side Scrape Kettle Agitator
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: RFPM537.4
|
Serial No:
|
|
Bottom and Side Scrape Kettle Agitator. Sized for a 20 gallon kettle. Produces even blends for constant product homogeneity. Scrapers prevent product 'burn-on' by constantly removing product that adheres to the kettle wall. Sterling Electric Motor, 1 hp, 1725 rpm, 230/460 V, 3.2/1.6 amps, 60 Hz, 3 phase. Sterling Electric Variable Speed Module, 11/45 rpm (min/max). Overall dimensions: 33 in. L x 19 in. W x 50-1/2 in. H.
|
|
Click here for more information (182.5 KB)
|
|
|
Click On Picture
|
Fiberglass Batch Tank with Neptune mixer - 150 Gallons
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MRSP247.1
|
Serial No:
|
|
Fiberglass Batch Tank with Neptune mixer - 150 Gallons. Mixer propeller dia: 3 ½ in. Shaft dia: 5/8 in. Shaft Length: 3 ft. 1 in. Motor, ½ hp, 1725 rpm, 115/208-230 V, 8.8/4.4 amps, 60 Hz, single phase. Inlets: (1) 2 ft. 11 ½ in. open top. Outlets: (1) 1 in. quick connect with strainer and shut off valve. Overall dimensions: 3 ft. 4 in. L x 3 ft. 4 in W x 5 ft. 5 in. H. (BE)
|
|
Click here for more information (400.5 KB)
|
|
|
Click On Picture
|
1997 Chemineer Agitator/Mixer
|
|
Mfg: Chemineer
|
Model: 3CTDM-.5
|
|
Stock No: 14.MRD295.8a
|
Serial No: 1-97683-33
|
|
1997 Chemineer Agitator/Mixer. Model: 3CTDM-.5, S/N: 1-97683-33. PO No: 3570-D1-51012. Equip. No: 1A-9010. Equipped for shaft with max diameter of 2 in. 100 rpm (final). Baldor Industrial Motor, 1/2 hp, 1725 rpm, 208-230/460 V, 2.1-2/1 amps, 60 Hz, 3 phase. Overall dimensions: 15 in. L x 13 in. W x 20 in. H.
|
|
Click here for more information (200.7 KB)
|
|
|
Click On Picture
|
Lightnin Motor-1/3 HP
|
|
Mfg: Lightnin
|
Model: 5KH42J391
|
|
Stock No: OI164.
|
Serial No:
|
|
Lightnin Motor-1/3 HP. Model: 5KH42J391. Motor specifications: 1,725 rpm, 115 V, 5.6 amps, 60 Hz, single phase. Overall dimensions: 7 in. L x 6 in. W x 10 in. H.
|
|
|
|
|
Click On Picture
|
Sharpee Mixer
|
|
Mfg: Sharpee
|
Model: FGP-05OUF
|
|
Stock No: 3.MRD289.a
|
Serial No: 39481
|
|
Sharpee Mixer. Model: FGP-05OUF. S/N 39481. Positive chuck maximum propeller diameter: 1/2 in. Baldor Industrial Motor, .30 hp, 1725/1425 rpm, 208-220/440, 1.4-1.4/.7 amps, 50/60 Hz, 3 phase. Overall dimensions: 9 in. L x 8 in. W x 12 in. H
|
|
Click here for more information (157.0 KB)
|
|
|
Click On Picture
|
Reliance Electric Agitator Drive
|
|
Mfg: Reliance
|
Model:
|
|
Stock No: OI165.
|
Serial No:
|
|
Reliance Electric Agitator Drive. Gear driven for maximum torque output. Reliance Electric Motor, 5/2.5 Hp, 1,725/860 rpm, 230 V, 60 Hz, 3 phases. Motor drive, 101 ratio, 17/8.5 rpm (final). Shaft dimensions: 2-1/2 in W x 6 in L. Mount base has a 16-1/2 in. dia. flange with (8) 1/2 in. dia. attachment holes at a center-to-center distance of 15-1/2 in. Overall dimensions: 44 in. L x 18 in. W x 22 in. H.
|
|
Click here for more information (217.4 KB)
|
|
|
Click On Picture
|
Philadelphia Agitator Gearbox
|
|
Mfg: Philadelphia Mixers
|
Model:
|
|
Stock No: SELM163.1a
|
Serial No: 80BGJ1146-2
|
|
Philadelphia Agitator Gearbox. S/N: 80BGJ1146-2. Order No: 2746. Stainless steel shaft. Mounting flange: 13-1/2 in. with (8) 1 in. dia. attachment holes. The flange bolt pattern center-to-center distance is 12 in. Coupling shaft diameter: 3 in. Reliance Electric Motor, 10 hp, 1755 rpm, 57.4 rpm (final), 230/460 V, 27/13.5 amps, 60 Hz, 3 phase. Overall dimensions: 38 in. L x 17 in. W x 35 in. H.
|
|
Click here for more information (250.6 KB)
|
|
|
Click On Picture
|
MixMor Mixer
|
|
Mfg: Mixmor
|
Model: OG-15
|
|
Stock No: 16a.PMI81.1
|
Serial No: 45165-1
|
|
MixMor Mixer. Model: OG-15. S/N: 45165-1. Shaft dimensions: 1-1/4 in. dia. x 32-1/2 in. L. (2) 10 in. dia. propellers. Baldor Industrial Motor, 1 hp, 1725 rpm, 300 rpm (final), 208-230/460 V, 5.3-5.2/2.5 amps, 60 cycles, 3 phase. Gear drive mixers are effectively used on higher viscosity products or larger volume applications. Overall dimensions: 24 in. dia. x 66 in. H. (ACN28)
|
|
Click here for more information (209.4 KB)
|
|
|
Click On Picture
|
Boston Agitator Drive
|
|
Mfg: Boston
|
Model:
|
|
Stock No: OI168.
|
Serial No: F584
|
|
Boston Agitator Drive. S/N: F584. Motor specifications: 10 hp, 1,725 rpm, 122 rpm (final), 208-230-460 V, 60 Hz, 3 phase. Mounting base dimensions: 16 in L x 16 in W with (4) 3/4 in. dia. attachment holes at a center-to-center distance of 13-1/2 in. Overall dimensions: 16 in. L x 16 in. W x 32 in. H.
|
|
Click here for more information (228.5 KB)
|
|
|
Click On Picture
|
Mixer Drive
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SELM175.1
|
Serial No:
|
|
Motor with Gear box. Motor: Euro Drive, Type: DF32DT100L4BHR, S.O: 850005152.5.01.85. 001. 230/460 volt, 13.6/6.8 amps, 4-5 in hp, 60 Hz, 3 phase, 2,025/405 rpm. Gear Box: Euro Drive, Type: RX71D32DT100L4BHR, S.O: 850005152.5.01.85. 001. 2,025/405 rpm (in), 1,350/270 rpm (out). 4-5 hp (in), Ratio 1.5.
|
|
|
|
|
Click On Picture
|
Mixer Drive
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SELM176.1
|
Serial No:
|
|
Motor with Gear Box. Euro Drive, Type: RX71D32DT100L4BHR. S.O: 80011855.601.87.001. 2,025/405 (in) rpm, 1,350/270 (out) rpm. 4-5 (in) hp. Ratio 1.52.
|
|
|
|
|
Click On Picture
|
Cleveland Mixer Head
|
|
Mfg: Cleveland/Welbilt
|
Model:
|
|
Stock No: MRD287.a
|
Serial No:
|
|
Cleveland Mixer Head, Gear Reducer 7785-1.
|
|
|
|
|
Click On Picture
|
Mixer Head Gear Reducer
|
|
Mfg: Not Specified
|
Model: 77851
|
|
Stock No: MRD288.a
|
Serial No:
|
|
Mixer Head Gear Reducer Model 77851, 10 in. L x 11 in. W x 7 in. H.
|
|
|
|
|
Click On Picture
|
Reliance Electric Agitator Drive
|
|
Mfg: Reliance
|
Model:
|
|
Stock No: RA-30.4a
|
Serial No: 448146-KT
|
|
Reliance Electric Agitator Drive. S/N: 448146-KT. Gear driven for maximum torque output. Shaft dimensions: 3/4 in. dia. x 2-1/2 in. L. Reliance Electric Motor, 3/4 Hp, 1725/860 rpm, 230/460 Volts, 1.35/0.67 Amps, 60 Hz, 3 phase. Motor Drive, 35/17.5 rpm (final). Mounting base has a 10 in. dia. flange with (4) 1/2 in. dia. attachment holes at a center-to-center distance of 9 in. Overall dimensions: 22 in. L x 11 in. W x 11-1/2 in. H.
|
|
Click here for more information (208.9 KB)
|
|
|
Click On Picture
|
Bottom-Mounted Magnetic Mixer Drives
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DBBP2632.2
|
Serial No:
|
|
(2) Bottom-Mounted Magnetic Mixer Drives. Magnet diameter: 8-1/4 in. Dayton Magnetic DC Motor, 1-1/2 hp, 2500 rpm, 180 V, 7.8 amps. Dayton Motor Drive, 10 ratio, 175 rpm (final). Bronco Variable Speed Drive, Model: 210, range: 0-2500 rpm. Eliminates the mechanical seal in typical mixer drives and prevents any product contamination. Suitable for food, pharmaceutical, biotech, and personal care applications. Overall dimensions: 28 in. L x 12 in. W x 9 in. H.
|
|
Click here for more information (189.5 KB)
|
|
|
Click On Picture
|
Chemineer Continuous Mixer Stainless Steel
|
|
Mfg: Chemineer
|
Model: INNV-5-4
|
|
Stock No: NSFM-9.1
|
Serial No: N-11034
|
|
Chemineer Inc. Mixer. Model INNV-5-4. S/N: N-11034. Shaft diameter: 1/2 in. Reeves AC Motor with Varidrive Module, 1/2 hp, 1725 rpm, 2150 max rpm, 538 min rpm, 115/230 V, 10.8/5.4 amps, single phase. (4) Wheels for easy maneuverability. Inlets/outlets: (3) 1 in. dia. 4-bolt, 125 lb. ANSI flanges. Overall dimensions: 29-1/4 in. L x 29-1/4 in. W x 53-1/2 in. H.
|
|
Click here for more information (200.7 KB)
|
|
|
Click On Picture
|
Lee Industries Kettle Agitator
|
|
Mfg: Lee Industries Inc.
|
Model:
|
|
Stock No: SHCA1627.13a
|
Serial No:
|
|
Lee Industries Kettle Side and Bottom Scrape Agitator. Sweep diameter: 44-1/2 in. Spacing between each pin is 4-3/4 in. Holds (12) 5 in. W scrapers. US Syncro Gear Motor, 2 hp, 1800 rpm, 220/440, 60 Hz, 3 phase. Overall dimensions: 82-1/2 in. L x 20 in. W x 59 in. H.
|
|
Click here for more information (198.9 KB)
|
|
|
Click On Picture
|
Sharpee Mixer
|
|
Mfg: Sharpee
|
Model:
|
|
Stock No: 3.MRD289B.
|
Serial No:
|
|
Sharpee Mixer. WEG: 21694. Gear driven for maximum torque. Baldor Industrial Motor, 1 hp, 1730 rpm, 575 V, 115 amps, 60 Hz, 3 phase. The base is an 8-bolt, 11 in. dia. flange. Shaft diameter: 1-1/4 in. Overall dimensions: 26 in. L x 11 in. W x 11-1/2 H.
|
|
Click here for more information (132.1 KB)
|
|
|
Click On Picture
|
1994 Lightnin Pneumatic Stainless Steel Mixer
|
|
Mfg: Lightnin
|
Model: XJA-100
|
|
Stock No: DBGV327.1a
|
Serial No: 94/B81529
|
|
1994 Lightning Stainless Steel Pneumatic Mixer. Model: XJA-100. Portable clamp on mixer with a 1 hp pneumatic motor. Final rpm: 290 (tested). Air requirements: 85 psig with a flow of 30 cfm. Impeller diameter: 1 ft. 1/2 in. Air inlet: (1) 3/8 in. push on air hose fitting. Shaft length: 3 ft. 10 in. Shaft diameter: 3/4 in. The benefits of a pneumatic mixer include reduced heat buildup and spark free operation. Estimated weight: 65 lbs. Overall dimensions: 9-7/8 in. L x 11-1/2 in. W x 4 ft. 11-3/4 in. H. (ACN51a).
|
|
Click here for more information (218.3 KB)
Click here for specifications (45.7 KB)
|
|
|
Click On Picture
|
Neptune Gear Driven Clamp Mixer
|
|
Mfg: Neptune
|
Model: D-1-0
|
|
Stock No: SPPP1412.a
|
Serial No: 5853
|
|
Neptune Gear Driven Clamp Mixer. Model: D-1-0. S/N: 5853. Mixer head has 1 in. dia. positive chuck. Heavy portable mixer for heavy fluids or large batches of light viscosity fluids. Leeson Motor, 1/2 Hp, 1725 rpm, 115/208-230 V, 8.8/4.4 FLA, 60 Hz. Overall dim: 20 in. L. x 9 in. W. x 10 in. H.
|
|
Click here for more information (133.8 KB)
|
|
|
Click On Picture
|
Assorted Mixers and Pumps
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MRSP204.a
|
Serial No:
|
|
Assorted Mixers and Pumps
|
|
|
|
|
Click On Picture
|
SOLD Stephan Hi-Speed Vertical Cutter / Mixer
|
|
Mfg: Stephan
|
Model: VCM 44 A/1
|
|
Stock No: 35.TMR3
|
Serial No:
|
|
10 Gallon Stephan Hi-Speed Vertical Cutter / Mixer, Model VCM 44 A/1, 1993, Manual Top Paddle, Top Viewport, 7-1/2 hp 208 volts 1,740 rpm, 35 in. L x 24 in. W x 48 in. H.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Cowles Disperser
|
|
Mfg: The Cowles Dissolver Co., Inc.
|
Model:
|
|
Stock No: 45.SS8.0
|
Serial No:
|
|
Cowles Disperser, Reliance motor 286T CZ Type P, 30 hp 1,765 rpm, 230/460 volts, 74-37 amps, Design B Code F
3 ph, Hz. 60 Amb 40, ID. 2MA75068 G15 XB.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Eurodrive Side Entering Agitator
|
|
Mfg: Eurodrive
|
Model:
|
|
Stock No: SELM144.1
|
Serial No:
|
|
Mixer with Motor and Agitator. Motor Euro Drive. 230/460 volt, 8.6/4.3 amps, 60 Hz, 3 phase, 1,720 rpm. Drive: Eurodrive. Type: KAF4ZDT100LS4-KS. S.O: 880203847.00 .00.002. 1,720 rpm (in), 165 (out). Ratio 10.56. Torque: 10.56. Torque: 11.60 lb-in.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hobart Vertical Cutter/Mixer
|
|
Mfg: Hobart
|
Model: VCM-40
|
|
Stock No: DSBI147.11a
|
Serial No:
|
|
Hobart Cutter/Mixer. Model: VCM-40. Unit features a 3-position motor controller (OFF-LOW-HIGH) manual rotary-type drum switch that is mechanically interlocked with bowl cover. Low speed is used for general cutting and mixing while high speed is used for emulsifying, pureeing pulverizing and crumbing. A motor, mounted beneath the bowl, supplies power directly to the cutting/mixing knives. The scimitar knives are at a fixed angle. Rotating at high speed, they pull the product down through the central portion of the bowl, slicing it in the process. The product is then returned up the sides of the bowl by centrifugal force. A vortex is created inside the bowl, which keeps the entire load in motion. When cutting certain products the action is supplemented by a hand operated mixing baffle. The Hobart bowl is tubular base-mounted and is available with a bowl inspection cover. Inlets/outlets: 20 in. dia. bowl opening. 2-Speed Motor: 7.5/10.5 hp, 1750/3500 rpm, 200-230/460 V, 60 Hz, 3 phase. Overall dimensions: 37 in. L x 27 in. W x 46 in. H.
SOLD
|
|
Click here for more information (197.4 KB)
|
|
|
Click On Picture
|
SOLD Quadro Ytron Fluid Mixer and Disperser Model XCT3A
|
|
Mfg: Quadro Engineering Incorporated
|
Model: XCT3A
|
|
Stock No: ENDX746.6
|
Serial No: XCT-0007R
|
|
Quadro Ytron Powder Disperser, Model: XC1-3A, S/N: XC1-0007R. Liquid capacity: 40-70 gpm, Powder capacity: 150 lbs/min. 3A sanitary CIP cleanability. (2) 4.25 in. dia impellers. VP motor: 7.5 hp, 3,520 rpm, 6.7 amps, 575 V, 60 Hz, 3 phase. Final speed: 5,400 rpm. Inlets/outlets: (2) 1 1/2 in., (1) 2 in., (1) 1 in. The Quadro Ytron XC has a dual stage reactor housing designed specifically to incorporate and disperse large quantities of powders into a liquid stream in a single pass, without aeration. The first stage in the reactor creates a strong vacuum ensuring the powders are drawn into the reactor head. Immediately after the powder comes into contact with the liquid, the premix is subjected to directional and velocity changes as the mix repeatedly impinges on stationary baffles. The second stage tangentially discharges a smooth, lump-free, homogeneous product. Unit serves many applications in the food & beverage, pharmaceutical, and industrial field. See pdf for detailed information on this unit. Overall dimensions: 29 in. L x 21 in. W x 32 in. H.
SOLD
|
|
Click here for more information (591.0 KB)
|
|
|
Click On Picture
|
SOLD Sew-Eurodrive High Viscosity Agitator Drive
|
|
Mfg: Sew-Eurodrive
|
Model:
|
|
Stock No: OI173.
|
Serial No:
|
|
(2) Sew-Eurodrive High Viscosity Agitator Drives. Model: KF86DV132S4. S/N's: 850021736 2.01.85.001 and 850021736 2.01.85.002. Final rpm: 54. Ratio: 31.69. Torque: 8750 in-lbs. Coupling shaft dimensions: 2-1/2 in. dia. x 5 in. H. Sew-Eurodrive Motor, 7.5 hp, 1720 rpm, 230/460 V, 19.2/9.6 amps, 60 Hz, 3 phase. Mounting flange dimensions: 13-1/2 in. dia. with (4) 3/4 in. dia. attachment holes at a center-to-center distance of 11-1/2 in. Overall dimensions: 29 in. L x 13 in W x 14 in. H.
SOLD
|
|
Click here for more information (242.6 KB)
|
|
|
Click On Picture
|
SOLD Perma San Heavy-Duty Direct Drive Mixer
|
|
Mfg: Perma San
|
Model: TEP-300
|
|
Stock No: SELM171.2
|
Serial No: 3849
|
|
Perma San Heavy-Duty Direct Drive Mixer. Model: TEP-300. SN: 3849. Versatile mixer can be used with VFD to increase and decrease mixing speeds. Shaft dimensions: 1-1/2 in. dia. x 41 in. L. (1) 12 in. dia. 3-blade propeller. Reliable Motor, 3 hp, 1750 rpm, 230-460V, 9.2/4.6 amps, 60 Hz, 3 phase. Overall dimensions: 14-1/2 in. L x 12-1/2 in. W x 74 in. H. SOLD
|
|
Click here for more information (239.9 KB)
|
|
|
Click On Picture
|
SOLD Perma San Heavy-Duty Direct Drive Mixer
|
|
Mfg: Perma San
|
Model: TEP-300
|
|
Stock No: SELM172.2
|
Serial No: 3267
|
|
Perma San Heavy-Duty Direct Drive Mixer. Model: TEP-300. SN: 3267. Versatile mixer can be used with VFD to increase and decrease mixing speeds. Shaft dimensions: 1-1/2 in. dia. x 39-1/2 in. L. (1) 10 in. dia. propeller. Reliance Motor, 3 hp, 230/460 V, 9.2/4.6 amps, 1730 rpm, 60 Hz, 3 phase. Overall dimensions: 23 in. L x 14-1/2 in. W x 75 in. H. SOLD
|
|
Click here for more information (196.7 KB)
|
|
|
Click On Picture
|
SOLD Full-Sweep Agitator with High-Speed Shear Mixer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: RFPM1603.4a
|
Serial No:
|
|
Full-Sweep Agitator with High-Speed Shear Mixer Mounted on Stainless Steel Bridge. Agitator bridge has a 35° decline. Blade sweep: 58 in. Sew-Eurodrive Motor, 5 hp, 1680 rpm, 230/460 V, 13.6/6.8 amps, 60 Hz, 3 phase. Sew-Eurodrive Gear Reducer, 94.9 ratio, 18 rpm (final). High-Speed Shear Mixer, impeller diameter: 6 in., stator diameter: 6-1/4 in. U.S. Motor, 10 hp, 3500 rpm, 230/460 V, 24.4 amps, 60 Hz, 3 phase. Inlets: (1) 1-1/2 in. dia. S-line fitting, (2) 4 in. dia. S-line fittings. Overall dimensions: 70 in. L x 24-1/2 in. W x 91 in. H.
SOLD
|
|
Click here for more information (307.3 KB)
|
|
|
Click On Picture
|
SOLD Chemineer Agitator Drive
|
|
Mfg: Chemineer
|
Model: 2HSA-15
|
|
Stock No: BWSS01.
|
Serial No:
|
|
Chemineer Agitator Drive. Model 2HSA-15. Drive element has: right-angle design, spiral bevel gearing, high-capacity tapered roller bearings, positive lubrication, extra capacity reducer shaft, and a rugged steel construction. Reliance Electric Motor, 15 hp, 1760 rpm, 370 rpm (final), 230/460 V, 40/20 amps, 60 Hz, 3 phase. Shaft dimensions: 1-1/2 in. dia. x 24-1/2 in L. Mounting base has a 13 in. dia. flange with (8) 7/8 in. dia. attachment holes at a center-to-center distance of 4-1/2 in. Overall dimensions: 39 in. L x 19-1/2 in. W x 51 in. H. SOLD
|
|
Click here for more information (267.4 KB)
|
|
|
Click On Picture
|
SOLD Arrow Portable Agitator
|
|
Mfg: Arrow
|
Model: 1750
|
|
Stock No: DSLP355.2a
|
Serial No: MC0211276
|
|
Arrow Portable Agitator. Model: 1750. S/N: MC0211276. 10-speed dial. On and off switch. Propeller diameter: 2 in. Propeller thickness: 0.376 in. Shaft length: 12-3/4 in. Shaft diameter 3/8 in. Voltage: 115 V. 1/15 HP, Max RPM 2000, Torque 2.34 in-lbs. Overall dimensions: 5-1/2 in. L x 15 in. W x 21 in. H. (ACN4) SOLD
|
|
Click here for more information (373.0 KB)
|
|
|
Click On Picture
|
SOLD Goodway Industries High Shear Homogenizer
|
|
Mfg: Goodway Industries
|
Model: CM15
|
|
Stock No: LOL105.4
|
Serial No: 49
|
|
Goodway Industries High Shear Homogenizer. Model: CM15. S/N: 49. Pin-type. Reliance Electric Motor, 7.5 hp, 1760 rpm, 230/460 V, 18.0/9.0 amps, 60 Hz, 3 phase. Dodge APG Motor Drive, 4.1 ratio, 429.26 rpm (final). Inlets: (1) 1 in. dia. ACME fitting, (1) 1-1/2 in. dia. ACME fitting. Outlets: (1) 1-1/2 in. dia. ACME fitting. Overall dimensions: 57 in. L x 28 in. W x 52-1/2 in. H. SOLD
|
|
Click here for more information (420.8 KB)
|
|
|
Click On Picture
|
SOLD Sew-Eurodrive Agitator Drive
|
|
Mfg: Sew-Eurodrive
|
Model: RF133R70DV132S4
|
|
Stock No: FA-182.1
|
Serial No:
|
|
Sew-Eurodrive Agitator Drive. Model: RF133R70DV132S4. Type: DFV132S4. S.O: 860040860.0.01.86.001. Motor specifications: 5 hp, 1720 rpm, 230/460 V, 19.2/9.6 amps, 60 Hz, 3 phase. Sew-Eurodrive RF133 Gear Reducer. Ratio: 228. 7.5 rpm (final), 42,000 lb-in. torque. Shaft diameter: 3 ¾ in. Flange dimensions: 18 in. dia. with (8) ¾ in. thru-holes at 6 in. center distances. Overall dimensions: 1 ft. 6 in. dia. x 4 ft. H. (ACN55) SOLD
|
|
Click here for Drawings (435.0 KB)
Click here for more information (142.7 KB)
|
|
|
Click On Picture
|
SOLD Hobart Vertical Cutter/Mixer- 25 Quart
|
|
Mfg: Hobart
|
Model: VCM-25
|
|
Stock No: FPPE094b.3a
|
Serial No: U4445
|
|
Hobart Vertical Cutter/Mixer- 25 Quart. Model: VCM-25. S/N: U4445 Stephan 2004189. Unit features a 3-position motor controller (OFF-LOW-HIGH) manual rotary-type drum switch that is mechanically interlocked with bowl cover. Inlets/outlets: (1) 20 in. dia. bowl opening. Hobart Enclosed Motor, 4.5/5.5 hp, 1,750/3500 rpm, 220 V, 17/19 amps, 60 cycles, 3 phase. Overall dimensions: 37 in. L x 27 in. W x 46 in. H. SOLD
|
|
Click here for more information (281.4 KB)
|
|
|
Click On Picture
|
SOLD Stephan Vertical Cutter/Mixer
|
|
Mfg: Stephan
|
Model: VCM-130E-1
|
|
Stock No: BAPF114.4
|
Serial No: U74-13595
|
|
Stephan Vertical Cutter/Mixer. Model: VCM-130E-1, S/N: U74-13595. Aluminum bowl, lid, baffle. Stainless blade. Bowl dimensions: 28 in. dia. x 15 in. H. Capacity: 130 Liters. Diameter of blades: 17 in. Baffle dimensions: 13-3/4 in. L x 5-1/4 in. W. Mixing Baffle Motor: 1 hp, 1170 rpm, 32 rpm (final), 440 V, 2 amps, 60 Hz, 3 phase. Stephan Drive Motor, 34 hp, 1750 rpm, 440 V, 60 Hz, 3 phase. Overall dimensions: 45 in. L x 29 in. W x 71 in. H. (ACN1205-74). SOLD
|
|
Click here for more information (153.6 KB)
|
|
|
Click On Picture
|
SOLD Stephan Vertical Cutter/Mixer- 25 Quart
|
|
Mfg: Stephan
|
Model: VCM-25
|
|
Stock No: cCJRP0003b.15
|
Serial No: 2001706
|
|
Stephan Vertical Cutter/Mixer- 25 Quart. Model VCM-25. S/N 2001706. Unit features a 3-position motor controller (OFF-LOW-HIGH) manual rotary-type drum switch that is mechanically interlocked with bowl cover. Low speed is used for general cutting and mixing while high speed is used for emulsifying, pureeing pulverizing and crumbing. A motor, mounted beneath the bowl, supplies power directly to the cutting/ mixing knives. The scimitar knives are at a fixed angle. Rotating at high speed, they pull the product down through the central portion of the bowl, slicing it in the process. The product is then returned up the sides of the bowl by centrifugal force. A vortex is created inside the bowl, which keeps the entire load in motion. When cutting certain products the action is supplemented by a hand operated mixing baffle. The Hobart bowl is tubular base-mounted and is available with a bowl inspection cover. Hobart Enclosed Motor, 4.5/5.5 hp, 1,750/3,500 rpm, 220 V, 17/19 amps, 60 cycles, 3 phase. Inlets/outlets: (1) 20 in. dia. bowl opening. Overall dimensions: 37 in. L x 27 in. W x 46 in. H. SOLD
|
|
Click here for more information (293.8 KB)
|
|
|
Click On Picture
|
SOLD Philadelphia Mixer 1/3 hp
|
|
Mfg: Philadelphia Mixers
|
Model: PG-13
|
|
Stock No: CCFP520.
|
Serial No: PM 84ABB0854
|
|
Philadelphia Mixer- 1/3 hp. Model: PG-13. SN PM 84ABB0854. Shaft and blade are stainless steel. Mixer output rpm: 350. Reliance motor: 1/3 hp, 1,725 rpm, 115/230 V, 4.8 amps, 60 Hz, 3 phase. Overall dimensions: 78-1/2 in. L x 9 in. W x 20 in. H. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Alson Mixer
|
|
Mfg: Alson
|
Model: 25 GP
|
|
Stock No: DSBI143B.
|
Serial No: 0282M
|
|
Alson Mixer. Model: 25 GP, S/N: 0282M. Shaft dimensions: 3/4 in. dia x 28 in. L. Propeller: 8 in. dia. Baldor industrial motor, 1 Hp, 1,725 rpm, 208-230/460 V, 1.3-1 amps, 60 Hz. Overall dimensions: 14 in. L x 8-1/2 in. W x 47 in. H. SOLD
|
|
Click here for more information (268.6 KB)
|
|
|
Click On Picture
|
SOLD Philadelphia Mixers Agitator MT Mixing Drive
|
|
Mfg: Philadelphia Mixers
|
Model: PTO
|
|
Stock No: SELM162.a
|
Serial No: 80BAJ1143-44
|
|
Philadelphia Mixers Agitator MT Mixing Drive. Model: PTO. S/N: 80BAJ1143-44. Order No: 832686-P. Agitator shaft diameter: 2 in. Coupling shaft dimensions: 2 in. dia. x 17 in. L. Reliance Motor, 5 hp, 1730 rpm, 56 rpm (final), 230/460 V, 14/7 amps, 31.4 gear ratio 60 hz, 3 phase. Overall Attachment flange dimensions: 11 in. dia. with (8) 3/4 in. dia. attachment holes at a center-to-center distance of 9-1/2 in. Features include: 304 stainless steel wetted parts and size MT-02(FM), double reduction, right angle shaft design. Chuck drive max. dimensions: 27-1/2 in. L x 14 in. W x 27 in. H.(ACN192). FAD SOLD
|
|
Click here for more information (349.6 KB)
Click here for Additional Information (123.2 KB)
|
|
|
Click On Picture
|
SOLD Kettle Bridge-Mounted Bottom Scrape Agitator
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: RFPM1604.4a
|
Serial No:
|
|
Kettle Bridge-Mounted Bottom Scrape Agitator. Blade dimensions: 58 in. diameter x 28 in. H. Shaft: 1-1/2 in. diameter x 57 in. H. Bridge: 93 in. L x 8 in. W. Baffle: 5-3/4 in. W x 31 in. H. Choice of attaching (12) 7 in. L scrapers, or (6) 14 in. L scrapers. Sew-Eurodrive Motor, 5 hp. Sew-Eurodrive Gear Reducer, ratio: 61.26, input: 1700rpm, output: 28 rpm, torque: 3331 lb-in. Product inlet (on the bridge): 1-1/2 in. 'S' line, (2) 2 in. 'S' line. Overall dimensions: 99 in. L x 13 in. W x 65 in. H. SOLD
|
|
Click here for more information (315.8 KB)
|
|
|
Click On Picture
|
SOLD Mueller Clamp-On Mixer
|
|
Mfg: Paul Mueller Co.
|
Model:
|
|
Stock No: HDNW001.
|
Serial No:
|
|
Mueller Clamp-On Mixer, 1 hp. Baldor Motor, 1 hp, 1,725 rpm, 208-230/460 Volt, 3.6-3.4/1.7 Amps, 60 Hz, 3 phase. Overall Dimensions 40 in. x 10 in W x 18 in. H. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hobart Countertop Mixer
|
|
Mfg: Hobart
|
Model: A-120-T
|
|
Stock No: 10.GR885.3a
|
Serial No: 1734114
|
|
Hobart Counter Top Mixer Model A-120-T, 12 quart painted frame countertop mixer. Stainless steel bowl and mixing paddle. S/N 1734114. 1/4 hp 115 volts 1,725 rpm, Temp Rise 40 °C, 19 in. L x 14 in. W x 26 in. H SOLD
|
|
|
|
|
Click On Picture
|
SOLD EKATO Portable Blender
|
|
Mfg: EKATO
|
Model:
|
|
Stock No: 15.MFBB243.5a
|
Serial No: 8435016
|
|
Ekato Portable Blender, S/N 8435016, Speed range 500-1400 rpm, 29 in. rod, 3-blade 4 in. spread, 1.5 kW (2.0115 HP) 265/460 volts, 30 in. L x 30 in. W x 6 ft. H
SOLD
|
|
|
|
|
Click On Picture
|
SOLD EMI High-Shear Rotostat Mixer
|
|
Mfg: EMI
|
Model: X-1
|
|
Stock No: OI166.
|
Serial No: C10903
|
|
EMI High-Shear Rotostat Mixer. Model: X-1. S/N: C10903. Multi-functional for dispersing, dissolving, emulsifying, homogenizing, and suspending. Direct drive for high speed rotor blade action. Outer impeller diameter: 4-1/2 in. Inner impeller diameter: 2-1/2 in. Shaft dimensions: 5/8 in. dia. x 32 in. L. Scott Motor, 1 hp, 1800 rpm (final), 90 V, 10 amps. Overall dimensions: 7 in. L x 6 in. W x 53 in. H. SOLD
|
|
Click here for more information (186.6 KB)
|
|
|
Click On Picture
|
SOLD Univex 20 Quart Floor Model Mixer
|
|
Mfg: Univex
|
Model: MF-20
|
|
Stock No: JLRZ001.5
|
Serial No: 1741
|
|
Univex 20 Quart Floor Model Mixer. Model: MF-20. Bowl is of stainless steel construction. Capable of working at (9) different speeds for light or heavy duty loads, which can also be controlled by a clock timer with a 34-minute maximum limit. Height adjusting lever eases bowl change-out. Double-duty head works as a press and mixer. Grab handle pushes product against a 9 in. dia. impeller. Electrical requirements: 115 VAC, 9.2 amps, 60 Hz. Inlets: (1) 7-1/2 L x 4-1/2 W cutter attachment, (1) 1 ft. ½ in. open top bowl. Outlets: (1) 10 in. L x 2-3/4 in. W discharge on cutter attachment. Overall dimensions: 3 ft. 7 in. L x 1 ft. 10 in. W x 4 ft. 1 in. H.(ACN27). SOLD
|
|
Click here for specifications (95.3 KB)
Click here for more information (275.0 KB)
|
|
|
Click On Picture
|
SOLD Hemispheric Bottom Kettle Agitator
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DWKN219.3
|
Serial No:
|
|
Hemispheric Bottom and Side-Scrape Kettle Agitator. Sized for a 50 gallon kettle. Features a stainless steel constructed agitator with 1-1/2 in. dia. shaft and plastic scrapers for simultaneous blending on the bottom and sides of kettle. Agitator dimensions: 29 in. L x 3 in. W x 21 in. H. Shaft dimensions: 1-1/2 in. dia x 20 in. H. Bridge dimensions: 3 ft. 8 in. L x 10 in. W. Blade dimensions: 12 in. L x 3 in. H. Scraper dimension: 4 in. x 4 in. Electron Electric Motor, 1 hp. Sterling Electric Drive, ratio: 60, rpm out: 29 (final). Overall dimensions: 3 ft. 6 in. L x 11 in. W x 3 ft. 5 in. SOLD
|
|
Click here for more information (295.2 KB)
|
|
|
Click On Picture
|
SOLD Philadelphia PGA-6-2 Pneumatic Stainless Steel Mixer
|
|
Mfg: Philadelphia Mixers
|
Model: PGA-6-2
|
|
Stock No: DBGV322.1a
|
Serial No: 96AKG1299
|
|
Philadelphia stainless steel pneumatic Mixer. Model: PGA-6-2. Portable clamp on mixer. Impeller diameter: 12-1/2 in. Air motor driven for no heat build-up. Motor operates spark free. Speeds can be varied by means of the air control valve. Gear driven for maximum output torque. 2.0 hp, 1750 rpm air motor. Gear ratio: 5-1. Final rpm: 350. Inlets/outlets: (1) 3/8 in. push on air hose fittings. Shaft length: 3 ft. 7-1/4 in. Shaft diameter: 1-1/4 in. Overall dimensions: 11-3/4 in. L x 1 ft. 1/2 in. W x 4 ft. 10 in. H. SOLD
|
|
Click here for more information (191.2 KB)
|
|
|
Click On Picture
|
SOLD MixMor Direct-Drive Mixer
|
|
Mfg: Mixmor
|
Model: D-14
|
|
Stock No: HDNW002.
|
Serial No: 63019-I
|
|
MixMor Direct-Drive Mixer. Model: D-14. S/N: 63019-I. D-14 direct-drive mixers are designed for low viscosity or small volume applications or applications requiring high shear. Chuck maximum propeller diameter: 5/8 in. Baldor Industrial Motor, 0.25 hp, 1,725 rpm, 208-230/460 V, 1.4-1.3/0.65 amps, 60 Hz, 3 phase. Overall dimensions: 14 in. L x 6-1/2 in. W x 18 in. H. SOLD
|
|
Click here for more information (260.1 KB)
|
|
|
Click On Picture
|
SOLD Agitator
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 8.187
|
Serial No:
|
|
Agitator XJA-33 881377763, base 8 in. W x 14 in. H x 15-1/2 in. L, rod 23 in. L x 0.75 in. W, propeller 11 in. spread, blades(3) 2-1/2 in. at base 4 in. at ends. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Philadelphia Pneumatic Stainless Steel Mixer
|
|
Mfg: Philadelphia Mixers
|
Model: PGA-6-2
|
|
Stock No: DBGV323.1a
|
Serial No: 97AKG0024
|
|
Philadelphia stainless steel pneumatic Mixer. Model: PGA-6-2. Portable clamp on mixer. Impeller diameter: 12-1/2 in. Air motor driven, no heat build-up. Motor operates spark free. Speeds can be varied by means of the air control valve. Gear driven for maximum output torque. 2.0 hp, 1750 rpm air motor. Gear ratio: 5-1. Final rpm: 350. Inlets/outlets: (1) 3/8 in. push on air hose fittings. Shaft length: 3 ft. 7-1/4 in. Shaft diameter: 1-1/4 in. Overall dimensions: 1 ft. 1-1/4 in. L x 1 ft. 1/2 in. W x 4 ft. 10 in. H. SOLD
|
|
Click here for more information (301.9 KB)
|
|
|
Click On Picture
|
SOLD Philadelphia Mixers Pneumatic Stainless Steel Mixer
|
|
Mfg: Philadelphia Mixers
|
Model: PGA-6-2
|
|
Stock No: DBGV325B.1a
|
Serial No: 97AKG0173
|
|
Philadelphia Mixers Stainless Steel Pneumatic Mixer. Model: PGA-6-2. This portable, variable speed, clamp on mixer is powered by a pneumatic motor and gear drive which provides maximum torque output, reduces heat build-up and allows for spark free operation. Impeller diameter: 12-1/2 in. Pneumatic motor: 2.0 hp, 1750 rpm. Gear drive ratio: 5:1. Final rpm: 350. Air inlet: (1) 3/8 in. push on air hose fittings. Shaft dimensions: 3 ft. 7-5/8 in. L x 1-1/4 in. diameter. Overall dimensions: 1 ft. L x 1 ft. 1/2 in. W x 4 ft. 10 in. H. (ACN32) SOLD
|
|
Click here for more information (178.6 KB)
|
|
|
Click On Picture
|
SOLD Ross ME101 Mixer-Emulsifier
|
|
Mfg: Ross
|
Model: ME101
|
|
Stock No: DBGV752.7a
|
Serial No: 65794C
|
|
Ross ME101 Mixer-Emulsifier. Model ME101. (2) Impellers, diameter: 2-1/2 in. Shaft length: 2 ft. 4 in. Marathon Electric motor, 1.5 hp. Rated for hazardous locations. 1 ft. 3 in. L x 1 ft. 2 in. W x 3 ft. 9 in. H.(ACN70) SOLD
|
|
Click here for more information (191.7 KB)
|
|
|
|
|
