|
|
Click On Picture
|
Conveyor with Alpha Dot Labeler
|
|
Mfg: FBN Metal Products
|
Model: 32-48-15
|
|
Stock No: GM420b.3
|
Serial No: 15825
|
|
FBN Metal Products Belt Conveyor with Alpha Dot Labeler. Model: 32-48-15. S/N: 15825. Conveyor effective length: 4 ft. Belt width: 15 in. Baldor Industrial Motor: 5 hp, 1725 rpm, 29 rpm(final), 230/460 V, 2/1 amps, 60 Hz, 3 phase. Conveyor infeed/exit height: 32 in. Overall dimensions: 50-1/2 in. L x 27.5 in. W x 36-1/2 in. H.
|
|
Click here for more information (324.8 KB)
|
|
|
Click On Picture
|
Stainless Steel Belt Conveyor with Alpha-Dot Labeler
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: GM414.3
|
Serial No:
|
|
Stainless Steel Belt Conveyor with Alpha-Dot Labeler. Belt width: 1 ft. 3 in. Maximum aperture: 1 ft. 3 in. Situated at conveyor's midsection is an Alpha-Dot Midget Labeler, Model: 1 LTR Base, power supply: 110 V. Baldor Electric Motor, 1/2 hp, 1725 rpm, 208-230/460 V, 2.1-2/1 amps, 60 Hz, 3 phase. Indiana Power Transmission Systems Gear Drive. Infeed/exit height: 2 ft. 3-1/2 in. Overall dimensions: 6 ft. 2 in. L x 2 ft. 4-1/2 in. W x 2 ft. 10 in. H.
|
|
Click here for more information (241.9 KB)
|
|
|
Click On Picture
|
Autoweigh Belt Feeder
|
|
Mfg: Autoweigh
|
Model: 302-12
|
|
Stock No: SNPM072.4
|
Serial No: 88/2268
|
|
Autoweigh Belt Feeder. Model: 302-12''XLC. S/N: 88/2268. Belt width: 12 in. Maximum aperture/clearance: 8 in. W x 5 in. H. Height at conveyor inlet/outlet: 30 in. Infeed hopper dimensions: 20 in. L x 20 in. W x 15-1/2 in. H. AutoWeigh Micro VI Control Panel, S/N: AP1354, panel is equipped with touchpad controls and digital display. Leroy-Somer Motor. Inlets/outlets: (1) 9 in. L x 8 in. W x 4 in. H infeed/discharge. Overall dimensions: 51-1/2 in. L x 44 in. W x 62 in. H.
|
|
Click here for more information (307.0 KB)
|
|
|
Click On Picture
|
Depositor - Stainless Steel Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDNP077b.6
|
Serial No:
|
|
(2) Depositor - Stainless Steel Conveyor . 46 in. W x 65 in. L. (Mesh is 40 in. wide.) This conveyor does not have a motor. Has 9 sprayer outlets.
Stainless Steel Conveyor. Baldor Motor, 3 phase. Cat No. VWDM3554, Spec. 35H828X623. Frame 56 C, Ser. F890, 1-½ hp, 208-230/460 volt, 4.6-4.2 amps, 1,725 rpm, 60 Hz, Rating is 40 ° C. amb cont. Gear box, US Electric, frame 26, type QC, Max Input hp 1.5 at 1,750 rpm, Gear ratio 30 v, SF 1.0, Max output torque 1,260. Id No. 5587004F. Has a sprayer. Conveyor mesh is 46 in. W, 65 in. L. Overall measurements: 70 in. W, 88 in. L, 53 in. H.
|
|
Click here for more information (286.2 KB)
|
|
|
Click On Picture
|
Case Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SGMPB040.2
|
Serial No:
|
|
Case Conveyor. Belt dimensions: 94 in. L x 24 in. W. Product input/output height: 32-1/2. Dayton motor. Dayton motor drive, ratio: 15, maximum input: 1 hp, maximum input rpm: 1750, maximum output torque: 445 in-lbs. 115 V, 50/60 Hz, 1 phase. Dayton control with speed switch. Overall dimensions: 96 in. L x 31 in. W x 34 in. H.
|
|
Click here for more information (163.1 KB)
|
|
|
Click On Picture
|
Conveyors
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNPM035B.
|
Serial No:
|
|
(2) Conveyors. Stainless steel. Belt width: 7-1/2 in. (each). Maximum aperture/clearance above belt: 17-1/2 in. W x 24 in. H. Belt type: KVP RAM-821 (Acetal grey). Sew-Eurodrive Motor, 1/2 hp, 1700 rpm, 280/460 V, 1.85/1.07 amps, 60 Hz, 3 phase. Bonfiglioli Tipo Motor Drive, 28 ratio, 60.71 rpm (final). Overall dimensions: 60 in. L x 23 in. W x 12 in. H.
|
|
|
|
|
Click On Picture
|
Stainless Steel Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNPM035C.
|
Serial No:
|
|
Stainless Steel Belt Conveyor. Belt width: 3 ft. 9-1/4 in. Maximum aperture: 3 ft. 9-1/4 in. W. Internal magnet: 4 ft. 2 in. L x 1 ft. 2 in. W. Infeed/exit height: 10-1/2 in. Overall dimensions: 4 ft. 11 in. L x 4 ft. 5 in. W x 10-1/2 in. H.
|
|
Click here for more information (97.5 KB)
|
|
|
Click On Picture
|
Stainless Steel Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: OI232.
|
Serial No:
|
|
Stainless Steel Belt Conveyor. Speedaire Air Tank- 5 Gallon. Lincoln Motor, 1/2 hp, 1725 rpm, 115-208/230 V, 8/4-4 amps, 60 Hz, single phase. Morse Raider Gear Drive, 20 ratio, 86.25 rpm (final). Infeed/exit height: 43 in. Overall dimensions: 88 in. L x 34 in. W x 57-1/2 in. H.
|
|
Click here for more information (230.8 KB)
|
|
|
Click On Picture
|
Stainless Steel Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: OI198.
|
Serial No:
|
|
Stainless Steel Belt Conveyor. Belt width: 12 in. Maximum aperture/clearance above belt: 12 in. W x 5 in. H. Baldor Industrial Motor, 1/2 hp, 1725 rpm, 208-230/460 V, 1.8-1.6/0.8 amps, 60 Hz, 3 phase. Dodge Tigear Speed Reducer, 50 ratio, 34.5 rpm (final). Overall dimensions: 67-1/2 in. L x 25-1/2 in. W x 18 in. H.
|
|
Click here for more information (152.7 KB)
|
|
|
Click On Picture
|
Sparks Belt Conveyor
|
|
Mfg: Sparks
|
Model:
|
|
Stock No: DENF003.
|
Serial No:
|
|
Sparks Belt Conveyor. Belt width: 18 in. Belt speed: 78 ft/min. Dura-Drive Plus Gear motor, 1/4 hp, 1584 rpm, 230/460 V, 2.7/ 1.55 amps, 60 Hz. Infeed/exit height: 9-1/2 in. Overall dimensions: 67-1/2 in. L x 26 in. W x 19 in. H.
|
|
Click here for more information (187.4 KB)
|
|
|
Click On Picture
|
Stainless Steel Chain Link Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 121
|
Serial No:
|
|
Stainless Steel Chain Link Belt Conveyor. Belt width: 35 in. Maximum aperture/clearance above belt: 35 in. W x 4 in. H. (4) Above-mounted spraybars and (2) bottom-mounted spraybars. Infeed/exit height: 35 in. Inlets: (1) 1-1/2 in. dia. S-line fitting, (3) 1-1/2 in. dia. NPT (male, spraybars). Outlets: (2) 7 in. L x 1 in. W drains, (1) 2-1/2 in. dia. port discharge. Overall dimensions: 105 in. L x 61 in. W x 60 in. H.
|
|
Click here for more information (220.2 KB)
|
|
|
Click On Picture
|
Woods Fabrication, Inc. 4-Lane Belt Conveyor
|
|
Mfg: Woods Fabrication, Inc.
|
Model:
|
|
Stock No: ERCS061.
|
Serial No: 9177
|
|
Woods Fabrication, Inc. 4-Lane Belt Conveyor. S/N: 9177. Belt width: 8 in. Maximum product width: 9-1/2 in. W. (4) Baldor Motors, 3/4 hp, 1725 rpm, 230-460 V, 2.2/1.1 amps, 60 Hz, 3 phase. (4) SM-Cycle Drives, ratio: 43, final rpm: 40, torque: 1800 lb. in. Overall dimensions: 93 in. L x 60 in. W x 43 in. H.
|
|
Click here for more information (209.5 KB)
|
|
|
Click On Picture
|
Stainless Steel 4-Lane Incline Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: ERCS070.
|
Serial No:
|
|
Stainless Steel 4-Lane Incline Belt Conveyor. Belt width: 8 in. Maximum product width: 9 in. W. Adjustable height. Leeson Motor, 1/3 hp, 1725 rpm, 208-230/460 V, 1.3/.65 amps, 60 Hz, 3 phase. Joyce comDrive, Joyce Lift and Jake, Model: E08830253, S/N: CD990206-00. Conveyor infeed height: 44 in. Conveyor exit height: 47 in. Overall dimensions: 11 ft. 3-1/2 in. L x 64 in. W x 48 in. H.
|
|
Click here for more information (186.5 KB)
|
|
|
Click On Picture
|
Stainless Steel Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: ERCS060.
|
Serial No:
|
|
Stainless Steel Belt Conveyor. Link belt width: 2 ft. Maximum aperture/clearance above belt: 2 ft. 2-1/2 in. W x 5-1/2 in. H. Rod diameter: 0.175 in. Distance between rods: 0.6 in. Gap between rods: 1 ft. 11-1/4 in. L x 1/2 in. W. (4) Wheels for easy maneuverability. Baldor Industrial Motor, 1/2 hp, 208-230/460 V, 1.8-1.6/0.8 amps, 1725 rpm, 60 Hz, 3 phase. Hub City Drive, ratio: 30/1WR, 57.5 rpm (final). Conveyor infeed/exit height: 3 ft. 9 in. Overall dimensions: 15 ft. 6 in. L x 3 ft. 6 in. W x 4 ft. 3 in. H.
|
|
Click here for more information (176.1 KB)
|
|
|
Click On Picture
|
Stainless Steel Belt Conveyor Line
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DENF006.
|
Serial No:
|
|
Stainless Steel Belt Conveyor Line. (2) 70 in. L x 25 in. W x 6 in. H sections, (1) 10 ft. 6-1/2 in. L x 25 in. W x 6 in. H section, and (1) 10 ft. 8 in. L x 41 in. W x 34 in. H. Baldor Industrial Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.7-3.4/1.7 amps, 60 Hz, 3 phase. Motor Drive, 40 ratio, 43.125 rpm (final).
|
|
Click here for more information (399.4 KB)
|
|
|
Click On Picture
|
Flex Conveyor with Dual Chain Drive
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SABE001.
|
Serial No:
|
|
Flex Conveyor with Dual Chain Drive. Baldor Motor, 1.7 hp, 2 rpm, 208-230/460 V, 1.3-1.21-0.6 amps, 60 Hz, 3 phase. Boston Motor Drive, 50 ratio, 109 lb-in. Block Plate: 13 in. W x 12 in. H. Maximum aperture/clearance: 4 in. W x 1-1/2 in. H. (4) Joyce Dayton. 6 ft. L conveyor. Joyce/Dayton Corp height adjustment crank, Model: WJ500-12, S/N: J95-11928, 500 lbs cap. Banner Mini Beam. Overall dimensions: 73 in. L x 34 in. W x 60 in. H.
|
|
Click here for more information (453.3 KB)
|
|
|
Click On Picture
|
Osgood Industries Belt Conveyor
|
|
Mfg: Osgood Industries
|
Model: 1500-F
|
|
Stock No: HDFD362B.
|
Serial No: 107
|
|
Osgood Industries Belt Conveyor. Model: 1500-F. S/N: 107. Power supply: 240 V, 30 amps, 60 Hz, 3 phase. Conveyor belt dimensions: 6 ft. 4 in. L x 4 in. W. Infeed/exit height: 2 ft. 6 in. Boston Gear Electric Motor, ¼ hp, 1725 rpm, 208-230/460 V, 1.3-1.2/0.6 amps, 60 Hz, 3 phase. Overall dimensions: 7 ft. 9 in. L x 2 ft. 1 in. W x 5 ft. 1 in. H.
|
|
Click here for more information (293.2 KB)
|
|
|
Click On Picture
|
Wardcraft Conveyors Motorized Belt “Slug Vayor” Conveyor
|
|
Mfg: Warderaft Conveyors
|
Model: SV1500-6-1-2-3-1/2
|
|
Stock No: SELM210.a
|
Serial No: 6117-5359
|
|
Wardcraft Conveyors Motorized Belt “Slug Vayor” Conveyor. Model: SV1500-6-12-3-1/2. S/N: 6117-5359. Usable Belt dimension: 14-1/2 in. W x 65 in. L. Reliance Electric Motor, 1/2 hp, 1725 rpm, 90 Volt (DC), 5.2 amps, 60 Hz. Boston Gear speed reducer. Conveyor in feed height: 34 in. Conveyor exit height: 31 in. Designed primarily to remove slugs/parts/scrap from beneath the dies in punch presses, the “Slug Vayor” permits continuous press and machinery operation by eliminating punched material from processes. PVC belt is resistant to oil and chlorine as well as other toxic ingredients found in oils and drawing compounds. Overall dimensions: 73 in. L x 24-1/2 in. W x 37 in. H.(ACN25).
|
|
Click here for more information (679.7 KB)
|
|
|
Click On Picture
|
Hytrol Company Inc. Conveyor
|
|
Mfg: Hytrol
|
Model: 138-ACC
|
|
Stock No: OI46
|
Serial No: 349859
|
|
Hytrol Company Inc. Conveyor, Model 138-ACC, S/N 349859. Has a motor with a gear box, no information. 4 conveyors pieces at 10 ft. L x 18 in. W. It operates on a v belt each piece to move the rollers. Each roller is 17 in. ½ in. L, 1-3/8 in. diameter.
|
|
Click here for more information (135.8 KB)
|
|
|
Click On Picture
|
Hytrol Company Inc. Conveyor
|
|
Mfg: Hytrol
|
Model: TA
|
|
Stock No: OI47
|
Serial No: 349878
|
|
Hytrol Company Inc. Conveyor, Model TA, S/N 349878. Has a motor and gear box, conveyor operates on a velt. There are 3 pieces of conveyor (1) at 126 in. L, 16 in. W, (1) at 60 in. L, 16 in. W, (1) at 84 in. L, 16 in. W. It also has 4 legs; the legs start at 1.34 in. by 16 in. W, (1) at 46 in. H, 16 in. W, (1) at 58 in. L, 16 in. W, 92 in. H, 16 in. W
|
|
Click here for more information (502.3 KB)
|
|
|
Click On Picture
|
Hytrol Rollers
|
|
Mfg: Hytrol
|
Model:
|
|
Stock No: OI49
|
Serial No:
|
|
Hytrol Rollers, 74 in. L, 16 in.W. With transmission, no motor and no information on transmission. The chain 50 gage. The shaft of the transmission is 1 in. where the chain is ¾ in. and it has a 6 in. pulley. Overall dimensions: 120 in. L, 16 in. W, 39 in. H. Rollers are 2-3/4 in. L, 2 in. W. The rollers are driven by belt.
|
|
Click here for more information (150.9 KB)
|
|
|
Click On Picture
|
Stainless Steel Frame Product Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDST119.14
|
Serial No:
|
|
Over 116 ft. Stainless Steel Frame Product Conveyor and Power Belt Conveyor with (7) Drives, plastic table top chain, up to 8 in. W, 14 in. W belt conveyor and 90 degree turns.
|
|
|
|
|
Click On Picture
|
Belt Conveyor Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: L49100.a
|
Serial No:
|
|
Plastic top belt conveyor stainless steel, 50 inch length x 7.5 inch width belt, approx.overall size: 4 foot 6 inch length x 1 foot 8 inch width x 4 foot height infeed: 38 inches high discharge: 43 inches high frame: stainless steel drive: 3/4 hp Reliance motor.
|
|
|
|
|
Click On Picture
|
Stainless Steel Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 122
|
Serial No:
|
|
Stainless Steel Belt Conveyor. Belt width: 12 in. Effective length: 42 in. Conveyor infeed/exit height: 32 in. Overall dimensions: 54 in. L x 21 in. W x 33 in. H.
|
|
|
|
|
Click On Picture
|
Pillsbury Company Conveyor
|
|
Mfg: Pillsbury Company
|
Model: 23B-00210
|
|
Stock No: 170
|
Serial No:
|
|
Pillsbury Company Conveyor, Model 23B-00210, 7 in. chain belt. Overall dimensions 225 in. L x 26 in. W x 63 in. H.
|
|
|
|
|
Click On Picture
|
Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: GSK22.5
|
Serial No:
|
|
|
|
Click On Picture
|
Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: GSK21.5
|
Serial No:
|
|
|
|
Click On Picture
|
SOLD Hytrol Conveyor
|
|
Mfg: Hytrol
|
Model:
|
|
Stock No: 14.D-020.4
|
Serial No: 224000
|
|
Hytrol conveyor, S/N 224000.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Conveyor Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 9-SC-8271
|
Serial No:
|
|
Conveyor stainless steel, 14 inch x 10 foot.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Trim Conveyor Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 85-SC-6251
|
Serial No:
|
|
Trim VanMark 3 belt trim convyor stainless steel, 3 belt, the main belt is center belt which is 22 inch wide with discharge chutes and cutting boards. The middle belt is 35 feet long. The top belt is 12 inch wide and the discharge is 18 inch wide. Electric drives.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Flatwire Belt Wash Tunnel Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 55.TAPG76.8
|
Serial No:
|
|
Flatwire Belt Wash Tunnel Conveyor, stainless steel conveyor 36 in. x 19 ft.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Portec Flomaster Belt Conveyor 180 deg
|
|
Mfg: Portec
|
Model: LB-30-28-180deg
|
|
Stock No: GICS205.1
|
Serial No: 143923-7745
|
|
Portec Flomaster Belt Conveyor 180 deg. Model LB-30-28-180deg. S/N 143923-7745. 30 in. wide white nitrile belt x 180 deg. Inside radius: 30 in. Outside diameter 10 -6 in. Overall height of belt: 52 in. Belt speed unknown 3 hp, 460 volt, 3 phase drive motor coupled with shaft mount Boston Gear reducer.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Conveyor Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 18-SC-7271
|
Serial No:
|
|
Conveyor stainless steel, 24 inch x 25 foot.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Wire Belt Conveyor Stainless Steel
|
|
Mfg: Not Specified
|
Model: B175
|
|
Stock No: BAFB76.1a
|
Serial No: 48257
|
|
Wirebelt conveyor, stainless steel. Gear box Model B175, S/N 48257, 5hp, ratio 30-B. Reliance motor, Model EF0056C, S/N 156H1052AB-PU, 90 volt, 5.20 amp, ½ hp, 1,725rpm. Overall dimensions 38 in. L x 32 in. W x 48 ½ in. H. Conveyor belt 95 in. L x 28 in. W.
SOLD
|
|
Click here for more information (120.2 KB)
|
|
|
Click On Picture
|
SOLD Plastic Belt Conveyor Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: L49101.2
|
Serial No:
|
|
Plastic belt conveyor, stainless steel frame, belt 84 inch length x 30 inch width, overall 76 inch length x 43 inch height x 40 inch width, industrial motor cat# VWDM3546, 3ph 1hp 1725rpm, 15 inch legs adjustable.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Conveyor Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 7a-SC-2461
|
Serial No:
|
|
Friction drive conveyor stainless steel, 24 inch x 12 foot.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Stainless Steel Power Conveyor Section
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDPH612.3
|
Serial No:
|
|
Stainless Steel Power Conveyor Section, Mfg. n/a. Leeson Permanent Magnetic Motor. Model C42D17FK2A, Cat No. 098002.00. 1/4 hp, 1,750 rpm, 90 volt, 2.5 amps, 9.0 in./lbs torque. Stainless Steel Mesh Belt: 25 in. W, 8 ft. L. Overall dimensions 39 in. W, 92 in. L, 60 in. H.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Conveyor with Weigh-Tronix Scale
|
|
Mfg: Weigh-Tronix
|
Model: DSFS2424A-005
|
|
Stock No: RLOL585c.2a
|
Serial No: 27288
|
|
Belt Conveyor with Weigh-Tronix Scale. Model DSFS2424A-005, S/N 27288. Capacity 500 lbs. Size: 24 in. L x 24 in. W. Class III. n Max: 5000/e Min: 0.1 lbs. Allen Bradley photoswitch. (2) Watt Induction Motors, Catalog No. 42GTU-9000-QD, Series A, 1/3 hp, 1,680 rpm, 230/460 V, 1.2/0.6 amps, 60 Hz, 3 phase, 0.25 kW. Conveyor dimensions: 30 in. L x 24 in. W; 24-½ in. distance between photoswitches. Weigh-Tronix control box, Model WI-127, S/N 010289, 115 V, 0.25 amps, 50/60 Hz. Legs: (4) 6 in. Overall dimensions: 31-½ in. L x 32 in. W x 30-½ in. H.
SOLD
|
|
Click here for more information (182.3 KB)
|
|
|
Click On Picture
|
SOLD AutoWeigh Belt Feeder
|
|
Mfg: Autoweigh
|
Model: 302-12"XLC
|
|
Stock No: SNPM071.4
|
Serial No: 88/2237
|
|
AutoWeigh Belt Feeder. Model: 302-12''XLC. S/N: 88/2237. Belt width: 12 in. Maximum aperture /clearance: 8 in. W x 5 in. H. Height at conveyor inlet/outlet: 30 in. Infeed hopper dimensions: 20 in. L x 20 in. W x 15-1/2 in. H. AutoWeigh Micro VI Control Panel, panel is equipped with touchpad controls and digital display. Leroy-Somer, no nameplate information. Inlets/outlets: (1) 9 in. L x 8 in. W x 4 in. H infeed/discharge. Overall dimensions: 51-1/2 in. L x 44 in. W x 62 in. H.
SOLD
|
|
Click here for more information (366.9 KB)
|
|
|
Click On Picture
|
SOLD Portec Flomaster Belt Conveyor 180 deg
|
|
Mfg: Portec
|
Model: LB-3028 180deg
|
|
Stock No: GICS206b.1
|
Serial No: 143536-7048
|
|
Portec Flomaster Belt Conveyor- 180 Deg. Model LB-3028 180deg. S/N 143536-7048. Belt: 30 in. W, white nitrile x 180 deg. Inside radius: 30 in. Outside diameter 10 ft 6 in. Overall height of belt: 52 in. Motor: 3 hp, 460 V, 3 phase. Drive motor coupled to shaft-mount Boston Gear reducer. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Axon Corp. Conveyor
|
|
Mfg: Axon Corp.
|
Model:
|
|
Stock No: OI54
|
Serial No:
|
|
Axon Corp. Conveyor, 108 in. L, 6 in. W, 32 in. H. With stainless steel belt motor: GE Motors, Model 5RPB56K AA52A. 1/3hp, 1,725rpm, 90 volt, 3.8 amps, no information on transmission. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Double - Belt conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: BP8b
|
Serial No:
|
|
Double-belt conveyor, 16.25in. Wide plastic belt, Electric control switchbox, 5ft. Long x 43in. Wide x 37in. Height. SOLD
|
|
|
|
|
Click On Picture
|
SOLD 9ft Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 121b
|
Serial No:
|
|
9ft. Chain-Link Belt Conveyor, 105in Long x 38in Wide x 48 in High. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Stainless Steel Rabbit Ear Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SSLP174.2
|
Serial No:
|
|
Stainless Steel Rabbit Ear Conveyor. Flexible belt: 13 ft. 5 in. L x 24 in. W. Clearance (cleats): 23 in. L x 7-3/4 in. W. Can be elevated or flat. This is a roller bed belt conveyor with an inclined troughing idler. This style conveyor is well suited to long runs and for improved product containment on the belt. It will also work well in high loading applications. Overall dimensions: 14 ft. 4 in. L x 39 in. W. SOLD
|
|
Click here for more information (191.8 KB)
|
|
|
Click On Picture
|
SOLD Plastic Process Equipment Inc. Motorized Cooling Conveyor
|
|
Mfg: Plastic Process Equipment Inc.
|
Model:
|
|
Stock No: DRGP070.a
|
Serial No:
|
|
Plastic Process Equipment Inc. Motorized Cooling Conveyor. (4) 20 in. dia fans. Product clearance: 23 in. W x 10-1/2 in. H. Belt width: 23 in. Minarik Corporation Motor Master 20000 Series, Model: MM23101C. Reliance Electric Motor, 1/3 hp, 1750 rpm, 90 V, 3.7 amps, 60 Hz, 1 phase. Conveyor infeed/exit height: 30 in. H. Overall dimensions: 15 ft. 4 in. L x 41 in. W x 53 in. H. SOLD
|
|
Click here for more information (198.1 KB)
|
|
|
Click On Picture
|
SOLD Plastic Process Equipment Inc. Motorized Cooling Belt Conveyor
|
|
Mfg: Plastic Process Equipment Inc.
|
Model: PC-2415
|
|
Stock No: DRGP070B.
|
Serial No: PC2415V2330691
|
|
Plastic Process Equipment Inc. Motorized Cooling Belt Conveyor. Model: PC-2415. S/N: PC2415V2330691. (3) 20 in. dia. fans. Product clearance: 23 in. W x 9 in. H. Belt width: 23 in. Power supply: 120 V, 60 Hz, single phase. Fincor 2100 DC Motor Control. Bodine Electric Company DC Gearmotor, 1/4 hp, 130 V, 1.8 amps. Conveyor infeed height: 59 in. Conveyor exit height: 21 in. H. Overall dimensions: 15 ft. 4 in. x 36 in. W x 59 in. H. SOLD
|
|
Click here for more information (258.9 KB)
|
|
|
Click On Picture
|
SOLD 2001 Raque Stainless Steel Belt Conveyor
|
|
Mfg: Raque
|
Model: M-4366-00-01
|
|
Stock No: ERCS052.
|
Serial No: 1010051
|
|
2001 Raque Stainless Steel Belt Conveyor. Model: M-4366-00-01. S/N: 1010051. (4) 2-3/4 in. wide belts. Previously used for transporting pies of 8 in., 9 in., and 10 in. dia. Power supply: 460 V, 60 Hz, 3 phase. Full-load current: 4 amps. Maximum short: 15 amps. Largest load: 2 amps. Allen-Bradley control panel. Infeed/exit: 34-1/2 in. H. (2) Sterling Electric Stainless Steel Motors, 1 hp, 1720 rpm, 208-230/460 V, 3.30/1.65 amps, 60 Hz, 3 phase. (2) Flex-Inline, ratio: 10, 172 rpm (final). Overall dimensions: 9 ft. 2-1/2 in. L x 41-1/2 in. W x 40 in. H. SOLD
|
|
Click here for more information (206.0 KB)
|
|
|
Click On Picture
|
SOLD Stainless Steel Chain Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: ERCS018.
|
Serial No:
|
|
Stainless Steel Chain Conveyor. Maximum product width: 11 in. Leeson Motor, 1.5 hp, 1725/1425 rpm, 208-260/460 V, 4.6/5.4 amps, 60/50 Hz, 3 phase. Rolls on (8) wheels for easy maneuverability. Infeed/exit height: 45-1/2 in. H. Overall dimensions: 26 ft. 4 in. L x 34 in. W x 46 in. H. SOLD
|
|
Click here for more information (180.3 KB)
|
|
|
Click On Picture
|
SOLD Adolph Gotesho Inc. Rolaprinter Conveyor
|
|
Mfg: Adolph Gotesho Inc.
|
Model: 1183LH
|
|
Stock No: 126b
|
Serial No: 25504 and 25806
|
|
(2) Adolph Gotesho Inc. Rolaprinter Conveyors. Model: 1183LH. S/N: 25504 and 25806. Maximum aperture/clearance above belt: 9 in. W x 9-1/2 in. H. US Motor, 1/2 hp, 1745 rpm, 230/460 V, 2.2/1.1 amps, 60 Hz, 3 phase. Infeed/exit height: 30 in. Overall dimensions: 49 in. L x 25 in. W x 51 in. H. SOLD
|
|
Click here for more information (234.6 KB)
|
|
|
|
|
