|
|
Click On Picture
|
Free Standing Consolidated 6 Spindle Capper
|
|
Mfg: Not Specified
|
Model: F-30
|
|
Stock No: 2000.BP2b.
|
Serial No: 4937
|
|
Free Standing Consolidated 6 Spindle Capper. Model F-30. S/N 4937. set to run 200 bpm, 28 mm caps. 3 hp, 230/460 V, 3 ph. Capper dimensions: 100 in. L x 41 in. W x 88 in. H. This capper is set to run left to right. The cap feeders dimensions are: 34 in. x 36 in. W x 86 in. H. (XMR113a)
|
|
Click here for more information (381.7 KB)
|
|
|
Click On Picture
|
1999 Hoppmann 30-Head Plug Turret 3
|
|
Mfg: Hoppmann
|
Model: Turret
|
|
Stock No: EMFP004.
|
Serial No: 364044
|
|
1999 Hoppmann 30-Head Plug Turret 3. Model: Turret. S/N: 364044. Previously used to plug Crayola marker ends. Operates on vacuum air and mechanical pressure. Designed for a line speed of 600 plugs/min.; capable of running at approximately 630 plugs/min.. Plug dimensions: 5/8 in. dia. x 5/8 in. H. Marker carrier dimensions: 1-1/2 in. outer diameter x 1-3/4 in. H (with 5/8 in. inner diameter). Marker dimensions (unplugged): 5/8 in. dia. x 4-1/2 in. H. Height at conveyor inlet/outlet: 33-1/2 in. Belt width: 2-1/2 in. Baldor Industrial Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.7-3.4/ 1.7 amps, 60 Hz, 3 phase. Boston 700 Series Gear Drive, 40 ratio, 43.125 rpm (final). Overall dimensions: 60 in. L x 48 in. W x 78 in. H.
|
|
Click here for more information (771.7 KB)
|
|
|
Click On Picture
|
Resina Screw Capper
|
|
Mfg: Not Specified
|
Model: RU 120-466
|
|
Stock No: 85.3R-2333.40
|
Serial No: 61-2633
|
|
Resina Screw Capper. Model RU120-466. S/N 61-2633. Capper is set for a 28 mm cap and can adjust height for a 6.6 in. bottle to 12 in. bottle. Machine is set for 28 mm cap on 11.5 in. bottle. Cap size can be changed by using different cap sorter and cap sliders. EXR.
|
|
Click here for more information (291.3 KB)
|
|
|
Click On Picture
|
Resina U40 Capper
|
|
Mfg: Resina
|
Model: U40484
|
|
Stock No: 85.RW-101.40
|
Serial No: 744995
|
|
Resina U40 Capper. Model U40484. S/N 744995. Motor: .33 hp, 220-440 V, 1,725 rpm. (8) Rotors: .20 hp, 220-440 V, 1,140 rpm. Overall dimensions: 93 in. L x 86 in. W x 37 in. H. (XMR98)
|
|
Click here for more information (242.2 KB)
|
|
|
Click On Picture
|
Norwalt Designs 16-Head Rotary Turret Plugger
|
|
Mfg: Norwalt Design
|
Model:
|
|
Stock No: ENAE46810.
|
Serial No: N-1622.
|
|
Norwalt Designs 16-Head Rotary Turret Plugger. Previous application: deodorant stick caps. Maximum cap size: 2-1/2 in. L x 1-1/2 in. W x 1 in. H. Maximum deodorant stick size: 2-1/2 in. L x 1-1/2 in. W x 5 in. H. Baldor Inverter Motor, 2 hp, 1725 rpm, 230/460 V, 5.8-2.9 amps, 60 Hz, 3 phase. Textron Speed Reducer, 20 ratio, 86.25 rpm (final). Norwalt lid closing machines combine high speed automation with mechanical reliability. Conveyor infeed/exit height: 38-1/2 in. Overall dimensions: 10 ft. 2 in. L x 81 in. W x 80 in. H.
|
|
Click here for more information (627.0 KB)
|
|
|
Click On Picture
|
Pneumatic Alcoa Capper
|
|
Mfg: Alcoa
|
Model: 212/8
|
|
Stock No: 250.BP14a
|
Serial No:
|
|
Pneumatic Alcoa Capper. Capacity: 400 BPM. Model 212/8. 8 Head. Set for 28 mm plastic caps. Capacity: 400 bpm. Center between heads: 4-1/2 in. Transmission: 3 hp, 220/460 V. Conveyor size 3-1/4 in. No transmission on conveyor. Overall dimensions: 68 in. L x 45 in. W x 93 in. H. (XMR137a)
|
|
Click here for more information (322.2 KB)
|
|
|
Click On Picture
|
Fowler Zalkin ROPP 6-Head Capper
|
|
Mfg: Zalkin
|
Model: CA
|
|
Stock No: JPSE836.
|
Serial No: 20788
|
|
Fowler Zalkin ROPP 6-Head Capper. Model: CA. S/N: 20788. Conveyor dimensions: 4-1/2 in. W x 79 in. L. Dual adjustable guide rails. Timing screw dimensions and pitch: 4 in. dia. x 31 in. L; 3-1/2 in. pitch. Conveyor infeed/exit height: 34 in. Leeson Speed Master Variable Frequency Inverter, Model: SML01, input: 115 V, 50/60 Hz, 13 amps, single phase. Output: 90 DCV, 10 amps. Overall dimensions: 7 ft. 4 in. L x 4 ft. W x 7 ft. 3 in. H.
|
|
Click here for more information (393.1 KB)
Click here for Additional Information (1,714.1 KB)
|
|
|
Click On Picture
|
1999 Hoppmann Rotary Plug Turret 14 Heads
|
|
Mfg: Hoppmann
|
Model: CMA-24
|
|
Stock No: ENAE46811.
|
Serial No: 389740
|
|
1999 Hoppmann 14-Head Rotary Plug Turret. Model: CMA-24. S/N: 389740. Capacity: 80 CPM. Operates on vacuum air and mechanical pressure. Air supply: 80 psi. Plug dimensions: 2-1/2 in. L x 2 in. W. Maximum container height: 6 in. H. Baldor Electric Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.6-3.4/1.7 amps, 60 Hz, 3 phase. Boston Gear Drive, ratio: 40, final speed: 43 rpm, output torque: 1375 in.-lb. Conveyor infeed/exit height: 2 ft. 9-1/2 in. Overall dimensions: 5 ft. 3 in. L x 5 ft. W x 6 ft. 2 in. H.
|
|
Click here for more information (689.5 KB)
|
|
|
Click On Picture
|
Pneumatic Scale Corporation 8-Head Capper with Rotating Cap Sorter
|
|
Mfg: Pneumatic Scale Corporation
|
Model: Pneumacap 3338
|
|
Stock No: JPSE823.
|
Serial No: 21438
|
|
Pneumatic Scale Corporation Pneumacap-series 8-Head Capper with Rotating Cap Sorter. Model: Pneumacap 3338. S/N: 21438. Nominal capacity: 240 cpm. Maximum Container diameter: 4 ½ in. Maximum Container height: 12 in. Chute installed will place 30mm x 12mm (1.18 in. dia. x 1.5 in. H.) caps. Also has change out chute 30mm x 35 mm (1.176 in. dia. x 1.391 in. H). Conveyor dimensions: 4 ½ in w x 43 in. L. Conveyor infeed/exit height: 37 in. General Electric Motor, ¼ hp, 1725 rpm, 575 V, 0.42 amps, 60 Hz, 3 phase. Overall dimensions: 9 ft. 1 in. L x 4 ft. 3 in. W x 8 ft. H. (ACN1550).
|
|
Click here for more information (965.9 KB)
Click here for Additional Information (2,008.5 KB)
|
|
|
Click On Picture
|
Pearl Packaging / Eastern Machine Bottle Capper with Vibratory Feeder
|
|
Mfg: Pearl Packaging / Eastern Machine
|
Model: CB104
|
|
Stock No: 140.FHF281a.30
|
Serial No: 82121
|
|
Pearl Packaging / Eastern Machine Bottle Capper with Vibratory Feeder. Model: CB104. S/N: 82121. Nominal capacity: 180 caps per minute. Maximum cap size: 60mm. Motors: 0.5 hp, 90 V DC. Hopper. Model: CH100, S/N: 9212. 29 in. L x 25 in. W x 9 in. H. Feeder: 21 in. dia., 115 V, Model: 120. S/N: CCW. Multi-Drive DC motor control: 120 V for rollers-belts-caps. Bottle grip lane: 31 in. L x 2-1/2 in. W (adjustable). Overall dimensions: 3 ft. 4in. L x 4 ft. W x 7ft. H.(ACN26-82).
|
|
Click here for more information (338.9 KB)
|
|
|
Click On Picture
|
Argard 11-Head Rotary Plugger
|
|
Mfg: Asgard
|
Model: 3000-15
|
|
Stock No: ENAE58346.
|
Serial No: 1570
|
|
Argard 11-Head Rotary Plugger. Model: 3000-15. S/N: 1570. Unit was used to insert threaded plugs / inserts into the bottom of filled deodorant sticks/containers. Maximum deodorant stick dimensions: 2 in. L x 1-1/2 in. W x 5 in. H. Timing screw dimensions: 3 in. dia. x 36 in. L. Reliance Electric Motor, 2 hp, 1740 rpm, 230/460 V, 5.4/2.7 amps, 60 Hz, 3 phase. Grove Gear Flexaling Speed Reducer, 50 ratio, 34.8 rpm (final). Unit is equipped with an Allen-Bradley Dataliner display panel. Conveyor infeed/exit height: 38 in. Overall dimensions: 17 ft. 4 in. L x 80 in. W x 95 in. H.
|
|
Click here for more information (513.5 KB)
|
|
|
Click On Picture
|
Capper
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SHCA920.4a
|
Serial No:
|
|
Capper. Capacity: 80 ppm. Maximum product dimensions: 2-1/2 in. W x 6-1/2 in. H. Conveyor length: 37-1/2 in. Star wheel diameter: 10 in. (5) Omron Photoelectric switches also includes control panel with start/stop and emergency disconnect buttons. (4) Adjustable legs. Electrol Conveyor Motor, 1/25 hp, 3450 rpm, 288 rpm (final), 90 V, 0.4 amps, 12:1 ratio, torque 3.9 in.-lb. Star Wheel Motor, 1/27 hp, 400 rpm, 34 rpm (final), 90 V, 0.5 amps, 12:1 ratio, torque: 55 in-lb. Infeed/exit height: 39 in. Overall dimensions: 37 in. L x 36-1/2 in. W x 56-1/2 in. H.
|
|
Click here for more information (299.9 KB)
|
|
|
Click On Picture
|
Resina Capper
|
|
Mfg: Resina
|
Model: S-30
|
|
Stock No: 75.IMS1a
|
Serial No: 816155
|
|
Resina Capper. Model: S-30. S/N: 81 6155. Max. Cap dimensions: 2 in. dia. x 3/4 in. H (50.80 mm dia. x 19.05 mm H). Last used with 1-1/2 in. W x 1/2 in. H caps (38.10mm dia. x 12.70mm H). Productivity: 24/60 per minute (glass and metal containers), 24/55 per minute (plastic containers). Single head unit. Conveyor belt maximum width: 4 in. Conveyor belt length: 83 in. General Electric Motor, 1 hp, 1725 rpm, 115/230 V, 13.2/6.6 amps, 60 Hz, single phase. Speed reducer, 30 ratio, 998 in. lb of torque, 57.5 final rpm. Cap sorter is belt driven with a Boston speed reducer. General Electric Motor: 1/3 hp, 1725 rpm, 115/230 V, 6.0/3.0 amps, 60 Hz, single phase. Inlets/exit height: 34 in. Overall dimensions: 83 in. L x 47 in. W x 94 in. H.
|
|
Click here for more information (215.4 KB)
|
|
|
Click On Picture
|
Stainless Steel Cap Feeder
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: FHF292a.1
|
Serial No:
|
|
Stainless Steel Cap Feeder. Cap size: 5 in. dia. x 1 in. H. Bowl diameter: 23 in. Bronco II Variable Frequency Inverter, power supply input: 115/230 VAC, 15 amps, 50/60 Hz, power supply output: 0-90/0-180 VDC, 10 amps, 50/100 VDC-100/200 VDC, 1 amp. KB Penta Power DC Motor Speed Controller. Infeed height: 7 ft. 6 in. H. Exit height: 6 ft. 7 in. H. Overall dimensions: 3 ft. 4 in. L x 2 ft. 10 in. W x 7 ft. 6 in. H.
|
|
Click here for more information (289.1 KB)
|
|
|
Click On Picture
|
New England Machinery Inc. Rotary Plug Turret
|
|
Mfg: New England Machinery Inc.
|
Model: NERSOC
|
|
Stock No: 318
|
Serial No: 7277
|
|
New England Machinery Inc. Rotary Plug Turret. Model: NERSOC. S/N: 7277. Turret cap size: 3 in. L x 2 in. W. Maximum aperture/clearance: 3 in. W x 6-1/2 in. H. Baldor Industrial Motor, 1-1/2 hp, 1760 rpm, 180 V, 7.7 amps. Regal Beloit Speed Reducer, 7.5 ratio, 234.66 rpm (final). Gast Vacuum Pump, Ref. No: 3067. Dayton Motor, 1 hp, 1725 rpm, 115/230 amps, 13.6/6.8 FLA, 60 Hz, single phase. Conveyor infeed/exit height: 36 in. Overall dimensions: 5 ft. L x 4 ft. 6 in. W x 6 ft. 3 in. H.
|
|
Click here for more information (495.0 KB)
|
|
|
Click On Picture
|
PDC Cap Sealer
|
|
Mfg: PDC
|
Model: 75C-ER
|
|
Stock No: SAF302a.2a
|
Serial No: 110
|
|
PDC Cap Sealer. Model: 75C-ER. S/N: 110. Power supply: 240 V, 12 amps, single phase, total hp: 1.5.
(2) 2 ft. 1 in. dia. film rolls. Maximum aperture/clearance: 3-1/2 in. W x 11 in. H. Timing screw dimensions: 4 ft. dia. x 3 ft. L. Maximum bottle size: 3-1/2 in. R-E Rate Meter. PDC Control Panel. Magnatek Motor, 1 hp, 1735 rpm, 180 V, 5.35 amps. Dodge Tigear Right Angle Drive. Emerson Electric
Co. Speed Reducer. Baldor Electric Motor with Feed Drive, 1/4 hp, 180 DCV, 1.3 amps, reduced output,
68 rpm, ratio: 45, torque: 135 in. lbs. Film Clutch Brake. Baldor Gear Motor, 1/4 hp, 125 rpm, 180 DCV,
1.2 amps, ratio: 20, torque: 100 in. lbs. Conveyor infeed/exit height: 3 ft. Overall dimensions: 10 ft. 7 in. L x 3 ft. 6 in. W x 7 ft. 2 in. H.
|
|
Click here for more information (528.5 KB)
|
|
|
Click On Picture
|
Pneumatic Scale Corporation Pneumacap-Series 8-head Capper
|
|
Mfg: Pneumatic Scale Corporation
|
Model: Pneumacap 3338
|
|
Stock No: OI280.
|
Serial No: 20030
|
|
Pneumatic Scale Corporation Pneumacap-Series 8-head Capper. Model: Pneumacap 3338. S/N: 20030. Nominal capacity: 240 cpm. Maximum Container diameter: 4 in. (Cap Bowl diameter: 36 in. Cap size: 38mm x 12mm (1 ½ in. dia. x ½ in. H.) caps. Maximum bottle size: 3 in. dia. x 6 in. H. Pneumacap Rotating Cap Sorter. General Electric Motor, ¼ hp, 1725 rpm, 115/230 V, 5.0/2.5 amps, 60 Hz, single phase. Speed Selector Inc. Series 21 Fixed Center Drive, Model: 4C. Infeed/exit height: 3 ft. Overall dimensions: 8 ft. 7 in. L x 3 ft. 6 in. W x 7 ft. 7 in. H. (ACN1550).
This piece is being offered and sold as is. It may or may not be complete. Please be sure and look at pictures and ask for additional pictures. Do not rely on original descriptions.
|
|
Click here for more information (571.0 KB)
Click here for Additional Information (2,008.5 KB)
|
|
|
Click On Picture
|
Cap Feeder
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: FHF233a.2
|
Serial No:
|
|
|
|
Click On Picture
|
Desoutter Pneumatic Cap Tightener
|
|
Mfg: Desoutter
|
Model:
|
|
Stock No: RW-267.1a
|
Serial No:
|
|
Desoutter pneumatic cap tightener, (1) dial top, (1) conveyor frame
|
|
|
|
|
Click On Picture
|
Resina Capper
|
|
Mfg: Resina
|
Model: U-40
|
|
Stock No: RW-145-A
|
Serial No: 795903
|
|
Resina capper, Model U-40 capper, S/N 795903 (no hoppers) with conveyor
|
|
|
|
|
Click On Picture
|
SOLD Lepel Portable Induction Cap Sealing System
|
|
Mfg: Lepel
|
Model: Lepjack Jr.
|
|
Stock No: 17a.DBHK190.2
|
Serial No:
|
|
Lepel Portable Induction Cap Sealing System, Model Lepjack Jr. Input power 600 va 50/60 cycle, 120 and 220 volt, I phase, power output .5 kw, dimensions 12-5/8 in. height x 7-1/8 in. width x 15 in. depth, weight 22 lbs., seal closures from 5 mm to 120 mm.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Resina Capper
|
|
Mfg: Not Specified
|
Model: U42-404
|
|
Stock No: TMH02
|
Serial No: 72-4808
|
|
Resina Capper, Model U42-404, S/N 72-4808, with a chute end for a 70 mm cap and an 82 mm cap.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Del Over Cap Applicator
|
|
Mfg: Not Specified
|
Model: 1VCC-502
|
|
Stock No: HDAC053.
|
Serial No: 99009
|
|
Del Over Cap Applicator, Model IVCL-502, S/N 99009 with stainless steel magazine and stainless finish. Can be changed to accommodate other cap sizes. Inline vertical cap loader. 4,000 cap storage capacity. Manual operated dump cam. IVCL height adjustment package.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Resina Screw Capper
|
|
Mfg: Not Specified
|
Model: U-30-973
|
|
Stock No: EMFP002.
|
Serial No: 73-4895
|
|
Resina Screw Capper. Carbon Steel Frame. Model U-30-973. S/N 73-4895. Capper it is set for a 28 mm cap and can adjust in hight for a 6.6 in. bottle to 12 in. bottle. Right now the machine is set for 28mm cap on an 11.5 in. bottle, (red eye bottle). Control box with on/off switch and an emergency stop button. The machine has adjustable speed with 1 hp motor and gear reducer. The conveyor has a stainless steel chain 3-1/4 in. width that feed into a gripper chain that holds the bottle in place while is being capped. The cap is deposited to a stainless steel cap hopper that then is fed to the bottle shoot that guides the cap all the way to the bottle. Dimensions of the machine: 129 in. L x 39 in. W x 94 in. H. EXR.
SOLD
|
|
Click here for more information (449.9 KB)
|
|
|
Click On Picture
|
SOLD White Capper
|
|
Mfg: Not Specified
|
Model: VE
|
|
Stock No: ANSA003.
|
Serial No: 758LJG
|
|
|
|
Click On Picture
|
SOLD Filler Parts Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SABE043.1a
|
Serial No:
|
|
Filler Parts. Stainless steel. Maximum aperture/clearance above belt: 8 in. W x 1/2 in. H. Height at conveyor inlet/outlet: 38 in. Dual roller chains move (20) 6 in. L x 5-1/2 in. W dies, each with a square cut-out. Dies travel under a 4-1/2 in. dia. x 7-1/2 in. L press roller and a 1-1/2 in. dia. x 7-1/2 in. long roller with horizontal cutting blade. Veeder Root 5-digit counter. Dayton SCR variable speed control box: 1/35-1/6 hp. Ogden ETR-9090 digital temperature sensor: 120 V, 15 amps. Dayton DC Gearmotor, 1/8 hp, 54 rpm (final), 34:1 ratio, 130 in-lb. torque. Overall dimensions: 72 in. L x 24 in. W x 62 in. H. SOLD
|
|
Click here for more information (313.8 KB)
|
|
|
Click On Picture
|
SOLD Zalkin ROPP 6-Station Capper with Three Heads
|
|
Mfg: Zalkin
|
Model: CA-6
|
|
Stock No: JPSE846.
|
Serial No: 60385
|
|
Zalkin ROPP 6-Station Capper with Three Heads. Model: CA-6. S/N: 60385. PTO driven. Accepts 34mm caps. This unit has three heads installed, but has the ability to accept a total of six cap tightening heads. Maximum bottle height: 9-3/4 in. Conveyor aperture/clearance: 2-3/4 in. W x 9-3/4 in. L. Conveyor infeed/exit height: 35 in. Baldor DC Motor 1/4 hp, 83 final rpm, 90DCV, 2.4 amps. Candy Positioner. Model: POSI 2. S/N: 4841. 2 hp @ 1750 rpm, 72 lb/in. Overall dimensions: 79 in. L x 46 in. W x 93 in. H. FAD SOLD
|
|
Click here for more information (424.3 KB)
|
|
|
Click On Picture
|
SOLD PMC Hackensack Plugger/Capper
|
|
Mfg: PMC
|
Model: RC53F
|
|
Stock No: ENAE65019.
|
Serial No:
|
|
PMC Hackensack Plugger/Capper. Model: RC53F. Size can: 202. Maximum bottle size: 2-1/2 in. Reliance Electric Motor, 3/4 hp, 1725 rpm, 230/460 V, 2.2/1.1 amps, 60 Hz, 3 phase. Dodge Tigear, 20 ratio, 86.25 rpm (final). Inlets/outlets: 2-3/4 in. W cap infeed. Overall dimensions: 66 in. L x 42 in. W x 72 in. H. SOLD
|
|
Click here for more information (349.3 KB)
|
|
|
Click On Picture
|
SOLD Resina Screw Capper
|
|
Mfg: Resina
|
Model: LC-89
|
|
Stock No: OI137.
|
Serial No: 612655
|
|
Resina Screw Capper. Model LC-89, S/N 612655. Conveyer: 126 in. L x 4-1/2 in. W. Motor: 1/2 hp, 1,725 rpm, 220/440 V, 60 Hz , 1.6/0.8 amps. Overall dimensions: 126 in. L x 35 in. W x 66 in. H. SOLD
|
|
Click here for more information (139.4 KB)
|
|
|
Click On Picture
|
SOLD Resina Automatic Machinery Co. Screw Capper with Sorter
|
|
Mfg: Resina Automatic Machinery Co.
|
Model: S50
|
|
Stock No: CMSV001.
|
Serial No: 765394
|
|
Resina Automatic Machinery Co. Screw Capper with Sorter. Model: S50. S/N: 765394. Cap dimensions: 40 mm x 12 mm (1.5 in. x .5 in.). Single head unit. All mechanical function with adjustable height control. Gear driven cap sorter. Conveyor effective length: 62 in. L x 4 in. W. Conveyor infeed/exit height: 33 in. Dayton Capacitor Starter Motor, 1/2 hp, 1725 rpm, 115/230 V, 9/4.5 amps, 60 Hz, single phase. Dayton Capacitor Motor, 3/4 hp, 1725 rpm, 115/208-230 V, 30.6/6.3-5.3 amps, 60 Hz, single phase. Cap sorter overall dimensions: 37 in. L x 25 in. W x 43 in. H. Overall dimensions: 79 in. L x 48 in. W x 68 in. H. SOLD
|
|
Click here for more information (317.2 KB)
|
|
|
Click On Picture
|
SOLD Kaps-All Capper Inc. Stainless Steel Capper
|
|
Mfg: Kaps-All Capper Inc.
|
Model: E
|
|
Stock No: CESL007.
|
Serial No:
|
|
Kaps-All Capper Inc. Stainless Steel Capper. Model: E. Fully Automatic. Comes with (4) tightening wheels. 4 ft. Conveyor system. Photo sensor. Stainless steel cap supply hopper with capacity of 2.7 cu. ft. Set to run a cap approx. 2-1/2 in., will open up to 3-1/4 in. dia cap S/S base. Stainless steel leveling screws. Baldor Motor, 1/5 hp, 1750 rpm, 90 V, 3.4 amps. Syntron Magnetic Vibrator, Model: V-20, 115 V, 2.5 amps, 60 Hz. Overall dimensions: 42 in. L x 40 in. W x 97-1/2 in. H. SOLD
|
|
Click here for more information (448.4 KB)
|
|
|
Click On Picture
|
SOLD Resina Pneumatic Screw Capper
|
|
Mfg: Resina
|
Model: S
|
|
Stock No: SPPP248.1
|
Serial No: 56 1621
|
|
Resina Pneumatic Screw Capper. Model: S, S/N: 56 1621. Century motor, ½ hp, 1735 rpm, 220/440 V, 1.5/0.75 amps, 60 Hz, 3 phase. Set for 38 mm (1.5 in.) metal caps. Conveyor dimensions: 62 in. L x 4-1/2 in. W. One capping head. Container feeder dimensions: 24 in. L x 18 in. W and slope from 12-1/2 in. H. to 19 in. H. Rotation cap feeder system: 20 in. diameter. Overall dimensions: 63 in. L x 30 in. W x 85 in. H. SOLD
|
|
Click here for more information (362.4 KB)
|
|
|
Click On Picture
|
SOLD Fords Capper
|
|
Mfg: Fords
|
Model: 0600 SD Press RH
|
|
Stock No: 143
|
Serial No: 18597
|
|
Ford Capper for aluminum milk style bottle caps. Type 0600 SD Press RH, S/N 18597, CPM 440, Cap Size 35.3 MM 5.7 MM, 110 V, single phase. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Swan-Matic Manual Capper Model CapMaster
|
|
Mfg: Swan-Matic
|
Model: CapMaster
|
|
Stock No: SUBF224.3a
|
Serial No: C300-3663
|
|
Swan-Matic Manual Capper, Model CapMaster, S/N C300-3663. CapMaster Controller, Model C302E, 120 AC Volts, Baldor Motor, 1/4 hp, 90 volts, 2.7 amps, 1,750 rpm. Overall Dimensions 23 in. L x 12 in. W x 35 in. H. SOLD
|
|
Click here for more information (654.2 KB)
|
|
|
Click On Picture
|
SOLD 1991 Swan-Matic Single Cycle CapMaster C300
|
|
Mfg: Swan-Matic
|
Model: CapMaster C300
|
|
Stock No: SUBF223.3a
|
Serial No: 3656
|
|
1991 Swan-Matic Single Cycle CapMaster C300. Model CapMaster C300. S/N: 3656. Capacity: Approximately 40 caps per minute. CapMaster Controller, Model C302E, 120 AC Volts, Baldor Motor, 1/4 hp, 90 volts, 2.7 amps, 1,750 rpm. The model C300 is a cycle on demand machine that waits for the operator to place the container against a V-block switch in order to start the cycle. The machine automatically stops at the end of the cycle and the operator removes the container. A height adjustment system allows for containers up to 13 inches tall. Overall dimensions: 23 in. L x 12 in. W x 35 in. H.(ACN45). SOLD
|
|
Click here for more information (586.1 KB)
|
|
|
Click On Picture
|
SOLD Consolidated Packaging Machinery Capper
|
|
Mfg: Consolidated Packaging Machinery Corp.
|
Model: D-4-FA
|
|
Stock No: JWIMS-11a
|
Serial No: 5299
|
|
Consolidated Packaging Machinery Corp. Capper. Model D-4-FA, S/N 5299. Capper setting: 70 mm cap; 3 in. dia. bottle; 10 in. H. (4) capping heads; 80 caps/minute. Motor: 1 hp with adjustable speed. Carbon steel frame. Control box. Bottle sorter can be fabricated, if desired. Change parts can be manufactured, if different bottle and cap sizes are needed. (XMR57). SOLD
|
|
Click here for more information (345.7 KB)
|
|
|
Click On Picture
|
SOLD Vibratory Bowl Cap Feeder
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: NOI8045
|
Serial No:
|
|
Vibratory Bowl Cap Feeder. Maximum product width: 1-1/2 in. (38 mm). Power requirements: 120 V, 60 Hz, 1 phase. Cap-chute end position is 41 in. high from ground. Unit has an actuator height adjuster. Bowl dimensions: 1 ft. 5-1/4 in. dia. x 4-5/8 in. H. Open top funnel hopper dimensions: 2 ft. 2 in. L x 2 ft. 2 in. W x 1 ft. 3 in. H. Outlet: 11-1/2 in. L x 8-1/8 in. W x 3 in. H (chute to feed bowl). Overall dimensions: 4 ft. 4 in. L x 2 ft. 3 in. W x 6 ft. 10 in. H. SOLD
|
|
Click here for more information (530.6 KB)
|
|
|
|
|
