|
|
Click On Picture
|
Stainless Steel 4-Tank CIP System – 150 Gallons Each
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDST117.31
|
Serial No:
|
|
Stainless Steel 4-Tank CIP System. (4) 150 gallon stainless steel CIP tanks. Inside tank dimensions: 2 ft. 10 in. dia. x 4 ft. 2 in. H. Overall dimensions: 3 ft. 5 in. dia. x 6 ft. 1 in. H. 1999 ITT Bell & Gossett shell and tube heat exchanger. Heat transfer surface area: approx. 34.5 sq. ft. Capacity: 4.03 gallons. Shell and tube side MAWP: 150 psi @ 375 ºF. Shell and tube side MDMT: -20 ºF @ 150 psi. APV Crepaco centrifugal pump, Model: 6V. Also include: Crepaco control panel, Taylor chart recorder, thermocouples, air operated sanitary valves, Magna control valves, Diversy Lever computerized controller and other sensors.
|
|
Click here for more information (912.8 KB)
|
|
|
Click On Picture
|
Scherping Welding Inc. Stainless Steel Skid Mounted 3-Tank CIP System
|
|
Mfg: Scherping
|
Model:
|
|
Stock No: HDAF534.59a
|
Serial No:
|
|
Scherping Welding Inc. Stainless Steel Skid Mounted 3-Tank CIP System. (1) 100 gallon stainless steel CIP tank, straight wall dimensions: 2 ft. 6-1/8 in. L x 2 ft. 9-1/8 in. W x 2 ft. 8 in. H. (2) 200 gallon stainless steel CIP tanks, straight wall dimensions: 3 ft. 10-1/8 in. L x 2 ft. 9-1/8 in. W x 3 ft. 4 in. H. Ampco centrifugal pump, Model: 3 x 2-1/2 DC2. Impeller diameter: 4-5/8 in. Baldor industrial motor, 7-1/2 hp, 575V, 3450 rpm. Skid mounted system with a remote Panel Systems Co. stainless steel control panel. (5) Pneumatic valves. Overall dimensions: 16 ft. 6 in. L x 2 ft. 10 in. W x 6 ft. 2 in. H.
|
|
Click here for more information (832.5 KB)
|
|
|
Click On Picture
|
2004 Statco Engineering and Fabricators, Inc. Space Saver CIP System
|
|
Mfg: Statco Engineering and Fabricators, Inc.
|
Model:
|
|
Stock No: HDWR060.17a
|
Serial No:
|
|
2004 Statco Engineering and Fabricators, Inc. Space Saver CIP system. Features include: a stainless steel, inline filter, a 316 stainless steel shell and tube heat exchanger with a heat transfer surface area of approximately 47.1 sq. ft., a Fristam FT series sanitary centrifugal pump, and an AJ-300 Anderson Chart Recorder with a stainless steel control panel and an Allen Bradley MicroLogix SLC 1000 Microprocessor.
|
|
Click here for more information (550.0 KB)
|
|
|
Click On Picture
|
Klenzade Stainless Steel CIP System- 65 Gallon
|
|
Mfg: Klenzade
|
Model:
|
|
Stock No: SFF315.5
|
Serial No: C-92506.1-4
|
|
Klenzade Stainless Steel CIP System- 65 Gallon. Inside straight-wall dimensions: 2 ft. L x 2 ft. W x 2 ft. 3 in. H. Ampco Centrifugal Pump, Model: 3x2-1/2 ZC2, S/N: AA1307-1-1, capacity: 250 gpm, impeller diameter: 5-1/4 in. Baldor Industrial Motor, 7-1/2 hp, 3450 rpm 230/460 V, 17.6/8.7 amps, 60 Hz, 3 phase. (3) Pneumatic Flow Divert Valves mounted to stainless steel manifold. Inlets: (4) 3/4 in. dia. ports, (1) 2 in. S-line fitting, (1) 18 in. L x 18 in. W (top infeed). Outlets: (1) 2 in. dia. ACME fitting, (1) 2 in. dia. port (overflow), (1) 2 in. dia. port, (2) 2 in. dia. S-line fittings. Overall dimensions: 4 ft. L x 3 ft. 3 in. W x 5 ft. 6 in. H.
|
|
Click here for more information (329.4 KB)
|
|
|
Click On Picture
|
1990 Klenzade (Ecolab) and Foxboro (Invensys) CIP System with Single Tank – 125 Gallons
|
|
Mfg: Klenzade (Ecolab) and Foxboro (Invensys)
|
Model:
|
|
Stock No: HDSP124.25a
|
Serial No:
|
|
1990 Klenzade (Ecolab) and Foxboro (Invensys) CIP system with single tank. Tank capacity: 125 gallons. Control panel monitor model: 874PH-A1. Ref No. 19519F01. Origin: 5S9025. Power supply: 120 VAC, 14 VA, 50/60 Hz. Fuse: 1/4 A Calibration: 0-14 PH. Output: 4-20 MA. Allen Bradley Panel Switches. CAT No. P-16 .120 V, 50/60 Hz. Inside Tank dimensions: 2 ft. 9 in. L x 1 ft. 9 in. W x 3 ft. 7-1/2 in. H. Inlets: (1) 2 in. dia. S-line fittings, (1) 2-1/2 in. dia. port, 28 in. L x 16 in. W. (top infeed). Outlets: (1) 3 in. dia. Q-line fittings, (1) 3 in. dia. Q-line fittings (overflow). Overall dimensions: 6 ft. 11 in. L x 4 ft. 3 in. W x 7 ft. 2 in. H.
|
|
Click here for more information (281.3 KB)
|
|
|
Click On Picture
|
1997 Paul Mueller PyroPure® Clean Steam Generator
|
|
Mfg: Paul Mueller
|
Model: PSG P2002
|
|
Stock No: EELD563.1
|
Serial No: 193232-1
|
|
1997 Paul Mueller PyroPure® Clean Steam Generator. Model: PSG P2002. S/N: 193232-1. Materials of construction include: 316 stainless steel for the heat exchanger, vessel, feed water and product contact points. Allen Bradley SLC 150 Programmable Controller. 1996 Mueller Shell and Tube Heat Exchanger: (128) 1/2 in. dia. x 35 in. L multi-tubes. Single Pass. Heat Transfer Surface Area: 48 sq. ft. Shell Side: MAWP: 125 psi @ 355 °F. MDMT: 32 °F @ 125 psi. Tube Side: MAWP: 125 psi @ 355 °F. MDMT: 32 °F @ 125 psi. Inlets: (1) 2 in. dia. S-line fitting (water), (1) 3 in. dia. port. (steam). Outlets: (1) 2 in. dia. S-line fitting (water), (1) 3 in. dia. port (steam). 1996 Mueller Vessel. MAWP: 125 psi @ 355°F. MDMT: 32°F @ 125 psi. Inside straight wall dimensions: 9 in. dia. x 66 in. H. Inlets: (1) 3 in. dia. The PyroPure® pure steam generator is capable of producing pyrogen-free pure steam that, when condensed, meets all U.S. Pharmacopoeia (USP) requirements for use in autoclaves, critical area humidification, and routine steam-in-place (SIP) sterilization. Overall dimensions: 4 ft. 10 in. L x 3 ft. 3 in. W x 7 ft. H.(ACN870).
|
|
Click here for more information (1,012.7 KB)
|
|
|
Click On Picture
|
Siberling CIP Unit
|
|
Mfg: Siberling
|
Model:
|
|
Stock No: 35.GM-629.10
|
Serial No:
|
|
Siberling CIP System Stainless Steel. With square tank, 24 in. x 24 in. x 28 in. height, removable 16 in. x 16 in. lid, 2 1/2 in. inlet and 2 in. outlet.
|
|
|
|
|
Click On Picture
|
Stainless Steel Manifold with Control Box
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: RPCN161C
|
Serial No:
|
|
Stainless Steel Manifold. Drip Pan- 3 Gallon, inside straight-wall dimensions: 1 ft. 3 in. L x 4 in. W x 4 in. H. Inlets: (4) 2 in. dia. S-line fittings, (1) 2 in. dia. port. Outlets: (1) 1-1/2 in. dia. discharge (drain pan), (5) 2 in. dia. ACME fittings. Overall dimensions: 1 ft. 4 in. L x 11 in. W x 1 ft. 10-1/4 in. H.
Hoffman Stainless Steel Control Box. Cat No: A-606CHNFSS. Overall dimensions: 7 in. L x 4-1/2 in. W x 8 in. H.
|
|
Click here for more information (109.2 KB)
|
|
|
Click On Picture
|
SOLD Klenzade CIP System
|
|
Mfg: Klenzade
|
Model:
|
|
Stock No: 25.RBD154a
|
Serial No:
|
|
Klenzade CIP system, (for vacuum pan), with Tenor time/count module, model II stepper module, (2) Triac 16-output modules, Tenor mod. 763 Eprom programmer, diversfy P-6100T chemical pump, (2) Wilden diaphragm pumps.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tel-Tech Inc. CIP System
|
|
Mfg: Tel-Tech Inc.
|
Model:
|
|
Stock No: 65.RWMG77
|
Serial No:
|
|
Tel-Tech Inc. CIP System, with (2) 200 gallon stainless steel tanks, (1) 100 gallon stainless steel tank, (2) stainless steel pumps, (4) air actuated valves, (1) y-check valve control panel with Allen-Bradley SLC-500 programmable controller, Red Lion temperature controllers and selenoid valves.
SOLD
|
|
Click here for more information (244.2 KB)
|
|
|
Click On Picture
|
SOLD CIP System
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 150.HC816.40
|
Serial No:
|
|
|
|
Click On Picture
|
SOLD Portable 5 Hp CIP Pump
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDCD094b.3
|
Serial No:
|
|
Portable 5 Hp CIP Pump on wheels.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Ecolab CIP Acid Sanitizer 2-Tank Skid
|
|
Mfg: Ecolab
|
Model: Mandate Plus
|
|
Stock No: HDDF050.40
|
Serial No: 51730
|
|
Ecolab CIP Acid Sanitizer 2-Tank Skid. Model: Mandate Plus. S/N: 51730. Tank capacities: 80 and 200 Gallon. Non-iodine system. Previously used the following active ingredients: 6.30% nonanoic acid, 1.09% decanoic acid, 92.61% inert ingredients. Ampco Centrifugal Pump, Model: 21/2x2 DC2, S/N: 0C-4575-2-1. Baldor Industrial Motor, 10 hp, 3450 rpm, 208-230/460 V, 26-24/12 amps, 60 Hz, 3 phase. For dairy & food processing equipment, particularly CIP systems, 55 gallon tanks/drums, and back-flush systems. Inlets: (1) 3/4 in. dia. pipe (city water), (2) 3/4 in. dia. NPT (female), (1) 1-1/2 in. dia. NPT (female), (1) 1-1/2 in. dia. pipe (female), (1) 2-1/2 in. dia. S-line fitting (pump). Outlets: (1) 2 in. dia. S-line fitting (pump), (1) 3 in. dia. overflow pipe. Overall dimensions: 11 ft. 2 in. L x 39 in. W x 84 in. H.
SOLD
|
|
Click here for more information (317.0 KB)
|
|
|
Click On Picture
|
SOLD 2001 CIP Heat Transfer Unit SOLD
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 45.MFBB360.3a
|
Serial No: 389
|
|
2001 CIP Heat Transfer Unit. Plasma Thaw CIP. Tested 06-06-02, Type C2EN50430, S/N 0389. Tank: 42 in. L x 6-1/2 in. W. Fristam Centrifugal Pump 53 gph. Model: FPX731-170, S/N: FPX73101698, 1-1/2 hp, 1,740 rpm, TDH: 33, Press: 16 psi. Meters/controls: Rosemount 2018C, Thornton 200CR, Model 83 vortex flow meter, (8) Advantage Spring-to-Close: 90 psi max, Spirax FT14-10, Fischer Model 32-24-533, Size: 3/4 in., (3) Worcester Series 39 Actuators, Gauge: 160 psi max. (42) Tubes. Tube dia: 3/8 in. Shell and tube side MAWP @ 375 °F: 150 psi. Shell and tube side MDMT @ 150 psi: -20 °F. Tube length: 31 in. Shell dia: 6-3/4 in. Material of construction (tubes): 316 stainless steel. Material of construction (shell): 316 stainless steel. Anderson gauge: 100 psi max. Overall dimensions: 68 in. L x 58 in. W x 76 in. H.
SOLD
|
|
Click here for more information (291.9 KB)
|
|
|
Click On Picture
|
SOLD APV Crepaco CIP System
|
|
Mfg: APV Crepaco
|
Model:
|
|
Stock No: ENDX696.29
|
Serial No:
|
|
APV Crepaco CIP System. APV Paraflow Heat Exchanger. Type HXC 6. S/N: 847-817, M/C No: 74658-B. (20) 9 in. W x 33 in. H stainless steel plates. Heating surface area: approx. 41.25 sq. ft. Each plate has approx. 2.06 sq. ft. of surface area. A-3 sanitary rated. APV Puma Centrifugal Pump, S/N: 20026, Size: 3x2. Brook Hanson Motor: 10.0 hp, 3480 rpm, 575 V, 60 Hz, 3 phase. Monarch Liquid Feed System control panel. (3) 300 gallon stainless steel tanks for caustic, rinse, and acid processes. All tanks feature removable hinged lids and Eurogauge probes. Overall dimensions: 14 ft. L x 4 ft. W x 7 ft. H. SOLD
|
|
Click here for more information (837.3 KB)
|
|
|
Click On Picture
|
SOLD Ecolab Engineered Systems Hot Water Makeup Unit
|
|
Mfg: Ecolab
|
Model:
|
|
Stock No: BIIR602.
|
Serial No: 3535
|
|
Ecolab Engineered Systems Hot Water Makeup Unit. Board No. 2269, S/N 3535. Anderson ACR 700 dual pen chart recorder. Fristam supply pump, Waukesha valves, ASCO utility valves, Supply line strainer, supply line check valve, return check probe, 304 stainless steel frame, Water tank: 60 gallon, 12 gauge, Foxboro flow meter, Enerquip stainless steel U- tube heat exchanger, Foxboro conductivity transmitter, Foxboro pressure transmitter, Manifold recirculation valve, 3-level probes, 3-point chemical injection, Sample valve. Fristam Centrifugal Pump 30 gpm. Model: FT202-155, S/N: FT202982135, 5 hp, 3,450 rpm, TDH: 160, Press: 70 psi. Heat Exchanger: Shell side MAWP @ 375 °F: 150 psig, Shell side MDMT @ 150 psig: -20 °F. Tube side MAWP @ 375 °F: 150 psig. Tube side MDMT @ 150 psig: -20 °F. SOLD
|
|
Click here for more information (670.3 KB)
|
|
|
Click On Picture
|
SOLD Cherry Burrell 100 gallon Tank
|
|
Mfg: Cherry-Burrell
|
Model:
|
|
Stock No: RWMG199
|
Serial No:
|
|
Cherry Burrell 100 gallon Tank, flat bottom single shell, inner dimensions: 29 in. diameter x 36. in H, Stainless steel cover with 2-1/2 and 2 in. inlets, 2-1/2 in. tri-clamp outlet, 1-1/2 in. outlet with 1-1/2 in. stainless steel plug valve, Stainless steel legs, with APV Crepaco Centrifugal Pump, S/N 6VC E0571, 2 hp 230/460 volt 1,730 rpm, 2 in. inlet 1-1/2 in. outlet, 18 in. L x 11 in. W x 10 in. H, overall dimensions 41 in. diameter x 62 in. H. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Stainless Steel CIP Tank 3-Compartment
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDTD096.3a
|
Serial No:
|
|
Stainless Steel CIP Tank 3-Compartment. Equipped with removable lid. First compartment dimensions: 28 in. L x 18 in. W x 39 in. H. Second compartment dimensions: 28 in. L x 26-1/2 in. W x 39 in. H. Third compartment dimensions: 28 in. L x 27 in. W x 39 in. H. Inlets: (2) 2 in. dia. S-line fittings. Outlets: (3) 2-1/2 in. dia. S-line fittings. Overall dimensions: 72 in. L x 29 in. W x 54 in. H. SOLD
|
|
Click here for more information (185.9 KB)
|
|
|
Click On Picture
|
SOLD Crepaco CIP Tank - 100 Gallon
|
|
Mfg: Crepaco
|
Model:
|
|
Stock No: 45-R213-A
|
Serial No:
|
|
Crepaco portable cip tank 100 gallon model mb-3 on tubular base with casters and Tri Clover model c114 motive pump. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Sani-Matic CIP Tank - 200 Gallon
|
|
Mfg: Sani-Matic
|
Model:
|
|
Stock No: 29a-R013-A
|
Serial No:
|
|
Sani-Matic single shell cip tank 200 gallon. Center bridge with lift top covers. 2-1/2 in. clamp outlet. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Sani-Matic CIP Tank - 250 Gallon
|
|
Mfg: Sani-Matic
|
Model:
|
|
Stock No: 29a-R792-A
|
Serial No:
|
|
Sani-Matic single shell cip tank 250 gallon. Center bridge with lift top covers. 2-1/2 in. clamp outlet. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Stainless Steel CIP Skid
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SFEP003.6a
|
Serial No:
|
|
Stainless Steel CIP Skid. S.O: 2925. 180-Gallon stainless steel tank. 18-Gallon stainless steel vacuum tank. Control requirements: 480 V, 20 amps, 60 Hz, 3 phase. APV Recirculating Centrifugal Pump, Model: 16V2, S/N: 100268162. Sterling Electric Motor, 1-1/2 hp, 1750 rpm, 208-230/460 V, 4.84-4.38/2.19 amps, 60 Hz, 3 phase. Overall dimensions: 100 in. L x 33-1/2 in. x 78 in. H. SOLD
|
|
Click here for more information (306.7 KB)
|
|
|
Click On Picture
|
SOLD Hartel Skid-Mounted CIP System
|
|
Mfg: Hartel
|
Model:
|
|
Stock No: pCFPH282.179
|
Serial No:
|
|
Hartel Skid-Mounted CIP System. (4) 750 galllon stainless steel tanks, steam hotset heaters, recirc. pumps & controls. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hartel Skid-Mounted CIP System
|
|
Mfg: Hartel
|
Model:
|
|
Stock No: pCFPH283.238
|
Serial No:
|
|
Hartel Skid-Mounted CIP System. (4) 750 galllon stainless steel tanks, steam hotset heaters, recirc. pumps & controls. SOLD
|
|
|
|
|
Click On Picture
|
SOLD CIP Heat Transfer Control Panel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 75.MFBB355.11a
|
Serial No:
|
|
CIP Heat Transfer Control Panel. Includes main circuit breaker, speed indicator, and power control. Thomas & Betts Heavy Duty Safety Switch on back frame. 30-Amp disconnecter delay action receptacle. Electric plug. (3) 2 in. S-Line fittings. Overall dimensions:18 in. L x 5 ft. W x 6 ft. H. SOLD
|
|
Click here for more information (259.8 KB)
|
|
|
Click On Picture
|
SOLD CIP System
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DSLP693.46
|
Serial No:
|
|
CIP System. First compartment dimensions: 23 in. L x 23 in. W x 27-1/2 in. L. Second compartment dimensions: 23-1/2 in. L x 48 in. W x 27-1/2 in. H. Ampco Centrifugal Pump, Model: 3x 2-1/2 ZCH2, S/N: V-55-937-1-1, impeller diameter: 6-5/8 in. Baldor Electric Motor, 15 hp, 3525 rpm, 230/460 V, 38-10 amps, 60 Hz, 3 phase. Ecolab controls with Omega Chart Recorder. Inlet: (1) 2 in. (1) 4 in. Outlet: (1) 2 in. Overall dimensions: 31 in. L x 105 in. W x 86 in. H. SOLD
|
|
Click here for more information (573.2 KB)
|
|
|
Click On Picture
|
SOLD Tetra Pak 4-cycle Filler CIP System
|
|
Mfg: Tetra Pak
|
Model:
|
|
Stock No: 320.HDVM126.88
|
Serial No:
|
|
Tetra Pak 4-Cycle Filler CIP System. Tri-Flo Centrifugal Pump 40 gph. Model: C216, 5 hp, 3,450 rpm, TDH: 170, Press: 75 psi. Manual-charts. Type SCU-5. Stand alone CIP System will run 4 to 6 cycles and set is up for up to four different tanks or fillers all with different cleaning applications. Complete with the recording instruments, the controllers, recirculation pump, the heat exchanger, the chemical feed pumps and tanks, and one makeup tank. Dimensions 38 in. L x 43 in. W x 80 in. H. New in mid 1990's. This unit uses an external heat source (steam) to heat the tank. There are two temperature probes that are located on the tank. See attached pdf's showing the schematic and parts list. Heating element reference number is 345. No heat exchanger mounted or electrical coils for heating. SOLD
|
|
Click here for more information (245.0 KB)
|
|
|
Click On Picture
|
SOLD Crepaco Stainless Steel 3-Tank CIP System – 150 Gallon Ea.
|
|
Mfg: Crepaco
|
Model:
|
|
Stock No: HDST118.31
|
Serial No:
|
|
Crepaco Stainless Steel 3-Tank CIP System. (3) 150 gallon stainless steel CIP tanks. Inside tank dimensions: 2 ft. 10 in. dia. x 4 ft. 2 in. H. Overall dimensions: 3 ft. 5 in. dia. x 6 ft. 1 in. H. 1999 ITT Bell & Gossett shell and tube heat exchanger. Heat transfer surface area: approx. 34.5 sq. ft. Capacity: 4.03 gallons. Shell and tube side MAWP: 150 psi @ 375 °F. Shell and tube side MDMT: - 20 °F @ 150 psi. APV Crepaco centrifugal pump. Model: 6V. Flow rate for new pump is 140 gpm with required horsepower and pressure. Also includes APV Crepaco control panel, chart recorder, thermocouples, air operated sanitary valves, Magna control valves and computerized controllers and sensors. SOLD
|
|
Click here for more information (610.0 KB)
|
|
|
|
|
