|
|
Click On Picture
|
Urschel Slicer, Model HS
|
|
Mfg: Urschel
|
Model: HS
|
|
Stock No: AARF013b.36
|
Serial No: 672
|
|
Urschel Slicer. Model: HS. S/N: 672. Model HS is a centrifugal-type slicer that produces flat slices from 1/16 in. (1/5 mm) to 3/4 in. (19.5 mm) thick. Capacity is determined by the slice thickness and type of product. For example, root vegetables with yield 3,000 lbs/hr (approx.) for each 1/16 in. of slice thickness, 12,000 lbs/hr (approx.) for 1/4 in. cuts, and 24,000 lbs/hr (approx.) for 1/2 in. slices. Slice thickness is adjusted by rotating the knurled adjustment knob. Electric Apparatus Motor, 2 hp, 1755/1460 rpm, 200/208/230/460 V, 5.8-7/5.5-6.8/5.2-6.2/2.6-3.1 amps, 60/50 Hz, 3 phase. Inlets: (1) 19-1/2 in. L x 15-1/2 in. W infeed hopper. Outlets: (1) 7 in. L x 5-3/4 in. W discharge chute. Overall dimensions: 61 in. L x 40 in. W x 50 in. H. (ACN330)
|
|
Click here for more information (321.3 KB)
|
|
|
Click On Picture
|
1998 Bizerba-Werke Fully Automated Slicer with Stacking/Shingling Option
|
|
Mfg: Bizerba-Werke
|
Model: A406FB
|
|
Stock No: ENDX715.4a
|
Serial No: 1258071
|
|
1998 Bizerba-Werke Fully Automated Slicer with Stacking/Shingling Option. Model: A406FB. S/N: 1258071. Programmable, continuously variable stroke adjustment from 30 to 55 strokes/minute. Blade diameter 13 inch. Maximum product size (round): 7.08 in. Maximum product size (rectangular): 6.89 in. x 9.45 in. Slice thickness: 0.02-0.47 in. Maximum stacking height: 2.36 in. Blade speed: 266 rpm. Electrical requirements: 120 V, 4.8 amps, 60 Hz, single phase. Overall dimensions: 45 in. L x 31 in. W x 58 in. H.(ACN250).
|
|
Click here for more information (639.9 KB)
|
|
|
Click On Picture
|
Stainless Steel Slicer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 3R-2018A.1
|
Serial No:
|
|
Stainless Steel Slicer. Maximum aperture/clearance above belt: 1-1/2 in. W x 1/2 in. H. Height at conveyor inlet/outlet: 45-1/2 in. Infeed belt dimensions: 48 in. L x 1-1/2 in. W. Aligning belt dimensions: 17 in. L x 1 in. W. Cutting wheel diameter: 5-1/4 in. Product is guided downwards, through the discharge, by a 4-pronged placing wheel. Excess liquids accumulate in a 20 in. L x 4-1/2 in. W dish. Reliance Electric Motor, 3/4 hp, 1725 rpm, 230/460 V, 4.6/2.3 amps, 60 Hz, 3 phase. Reeves Motor Drive, 6.1 ratio, 764 rpm (max), 76.4 rpm (min). Inlets: 1/2 in. dia. threaded fitting. Outlets: 2 in. L x 2 in. W discharge chute. Overall dimensions: 55 in. L x 29 in. W x 56 in. H.
|
|
Click here for more information (382.9 KB)
|
|
|
Click On Picture
|
Griffin Slicer Stainless steel
|
|
Mfg: Griffin
|
Model:
|
|
Stock No: SFEP610.2a
|
Serial No:
|
|
Griffin Stainless Steel Slicer. Unit uses (2) 13 in. circular, rotating cutting knives to cut product. There exists a 1/4 in. gap between cutting knives and the 33 in. dia rotating table. Industry Uniserve Univerter 2 HP AC Inverter Drive, input: 208-230 V, 7.5 amps, 50/60 Hz, 3 phase, output: 3.5-230 V, 7.5 amps. Positions easily by rolling on (4) casters. Baldor Industrial Motor, 3/4 hp, 1725 rpm, 230/460 V, 2.2/1.1 amps, 60 Hz, 3 phase. Ohio Gear Drive, 40 ratio, 43.125 rpm (final). Inlets: (1) 2-1/2 in. W x 3 in. H oval infeed, (3) 6 in. dia. ports. Outlets: (1) 36 in. L x 36 in. W. Overall dimensions: 59-1/2 in. L x 55 in. W x 60 in. H.
|
|
Click here for more information (402.3 KB)
|
|
|
Click On Picture
|
General Machinery Corporation Hydrauflaker Slicer
|
|
Mfg: Genmac
|
Model: FS-10-C
|
|
Stock No: EELD371.4a
|
Serial No: 499
|
|
General Machinery Corporation Hydrauflaker Slicer. Model: FS-10-C. S/N: 499. Rotating cutting drum dimensions: 12 in. dia. x 29 in. L. Cutter dimensions: 4 in. L x 1-1/2 in. W. Maximum aperture/clearance: 33 in. L x 6 in. H. Teco-Westinghouse Motor, 7-1/2 hp, 1755 rpm, 230/460 V, 24.9/12.4 amps, 60 Hz, 3 phase. Baldor Industrial Hydraulic Motor, 1-1/2 hp, 1725 rpm, 208-230/460 V, 5.3-5/2.5 amps, 60 Hz, 3 phase. Inlets: (1) 33 in. L x 6 in. H. (infeed). Outlet: (1) 29 in. L x 8 in. W. (product discharge). Overall dimensions: 7 ft. L x 3 ft. 9 in. W x 6 ft. H.
|
|
Click here for more information (462.1 KB)
|
|
|
Click On Picture
|
Urschel Cutter/Dicer, Model GK-A
|
|
Mfg: Urschel
|
Model: GK-A
|
|
Stock No: SGM4014.100
|
Serial No: 2176
|
|
Urschel Cutter/Dicer. Model: GK-A. S/N: 2176. Maximum product size: 5-1/2” in any dimension. Has a 2 Hp Motor. Produces crinkle cut slices, three-dimensional cuts having four crinkle surfaces, and plain cuts from a variety of fruits and vegetables. Strips can move without interruption across the top surface of the slicing knife holder into the circular knives where they are cut into cubes, or other three-dimensional cuts of a selected size. Overall dimensions: 6 ft 1-3/4 in L x 3 ft 10 in W x 4 ft 1-1/4 in H. (ACN320).
|
|
Click here for Specs (172.6 KB)
|
|
|
Click On Picture
|
Stainless Steel Vegetable Slicer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SFEP1327.1
|
Serial No:
|
|
Stainless Steel Vegetable Slicer. Multi-position blade system. Holds a maximum of (13) blades. Belt dimensions: 32 in. L x 73 in. L. Distance between cleats: 4 in. L. Leeson Motor, 3/4 hp, 1725 rpm, 208-230 V, 5.4 FLA, 5.7 SFA., Motor drive, output speed: 630 rpm, ratio: 2.7 to 1. Belt inlet: 41 in. H, outlet: 66 in. H. (4) casters for an easy moving. Overall dimensions: 73 in L x 40 in. W x 85 in. H.
|
|
Click here for more information (227.3 KB)
|
|
|
Click On Picture
|
Butcher Boy Vertical Band Saw
|
|
Mfg: Butcher Boy
|
Model:
|
|
Stock No: ERCS012.
|
Serial No:
|
|
Butcher Boy Vertical Band Saw. Product clearance: 13-1/2 in. W x 5 in. H. Push button control panel. (2) Chain conveyor belts. Band saw width: 1/2 in. Woods E-trac AC Inverter. (4) Wheels for easy maneuverability. Baldor Motor, 1 hp, 1725 rpm, 208-230/460 V, 7-3.4/1.7 amps, 60 Hz, 3 phase. Motor, 3 hp, 1732 rpm, 415 rpm (final), 230 V, 41 amps, 60 Hz. Infeed/exit height: 36-1/2 in. H. Overall dimensions: 52 in. L x 34 in. W x 69 in. H.
|
|
Click here for more information (163.6 KB)
|
|
|
Click On Picture
|
Chisholm Ryder Green Bean Cutter
|
|
Mfg: Chisholm Ryder
|
Model: PST542C
|
|
Stock No: SFEP1322A.a
|
Serial No: BST542C
|
|
Chisholm Ryder Bean Cutter. Model: PST542C. S/N: BST542C. Infeed hopper dimensions: 2 ft. L x 1 ft. 8 in. W. Drum dimensions: 2 ft. dia. x 6 ft. 11 in. L. Flight dimensions: 11-1/2 in. L x 11-1/2 in. W. Flight pitch: 2 in. (2) 6 ft. 11 in. W x 2 ft. 5 in. H access doors. Sterling Electric Motor, 3/4 hp, 1730 rpm, 208-230/460 V, 2.27-2.20/1.10 amps, 60 Hz, 3 phase. Speedtronics Gear Drive, 25 ratio, 69.2 rpm (final). Inlets: (1) 1 ft. 3 in. dia. infeed. Outlets: (1) 1 ft. 3 in. dia. discharge. Overall dimensions: 9 ft. 9-1//2 in. L x 2 ft. 10 in. W x 6 ft. 2 in. H. FAD
|
|
Click here for more information (605.1 KB)
|
|
|
Click On Picture
|
DoAll Band Saw
|
|
Mfg: DoAll
|
Model: 36-3
|
|
Stock No: OI89
|
Serial No: 126-59184
|
|
|
|
Click On Picture
|
Hobart Meat Saw
|
|
Mfg: Hobart
|
Model: 5614
|
|
Stock No: 30.CS340a.12a
|
Serial No: 99212451
|
|
Hobart Meat Saw, Model 5614, Serial Number 99212451, 208V, 1725 RPM, 71 in H x 39 in W x 33 in L.
|
|
|
|
|
Click On Picture
|
Hobart Meat Tenderizer and Cutter Model 403
|
|
Mfg: Hobart
|
Model: 403
|
|
Stock No: KBMW102.1a
|
Serial No: 561-146-717
|
|
Hobart Meat Tenderizer and Cutter Model 403 S/N: 561-146-717. (2) 2-1/4 in. dia. x 9-1/4 in. L blades. Unit specifications: 1/2 hp , totally-enclosed, fan-cooled, single-phase, capacitor-start, induction-run type, 1725 rpm, 115 V, 8.1 amps, 60 Hz. single phase. The Hobart 403 strip cuts a variety of meats and cheeses for applications that include stir fry, fajitas, chef salads and garnishes; and tenderizes meats by cutting tendons and other tough fibers. Other features include a safety system that has sensing switches to detect if guard or motor housing are not in place and a pilot light that warns when machine is switched to “On”. Satin finish, stainless steel cleaning combs guide meat between rollers thus automatically preventing any accumulation of meat between knives and unit lifts easily out of frame to enable ease of cleaning and ease of use. Overall dimension: 19-1/2 in. L x 10 in. W x 18 in. H.(ACN22).
|
|
Click here for more information (317.5 KB)
Click here for Additional Information (36.0 KB)
|
|
|
Click On Picture
|
Double Roll Buster Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: RW-913.4
|
Serial No:
|
|
Stainless steel double roll buster, 16 in D x 18 in W, (1) rubber and (1) stainless steel rolls with geardrive.
|
|
|
|
|
Click On Picture
|
SOLD Martin Onion Slicer
|
|
Mfg: Not Specified
|
Model: MOVS-5000-H
|
|
Stock No: 15-SC-1661
|
Serial No:
|
|
Martin onion slicer, model no. MOVS-5000-H (missing parts).
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Martin Onion Slicer
|
|
Mfg: Not Specified
|
Model: MOVS-5000-H
|
|
Stock No: 15-SC-2661
|
Serial No:
|
|
Martin onion slicer, model no. MOVS-5000-H (missing parts).
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Cabbage Crusher Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: NSFM-8.1
|
Serial No:
|
|
Cabbage crusher, cylinder 24 in L x 8 in D, 1 inch teeth, overall 51 in W x 46 in H x 36 in L.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hobart Bowl Chopper
|
|
Mfg: Hobart
|
Model:
|
|
Stock No: 5-SC-1861
|
Serial No:
|
|
Hobart bowl chopper, model no. 34186, 115v.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Holac Meat Dicer
|
|
Mfg: Holac
|
Model: RA121
|
|
Stock No: DSBI098.5a
|
Serial No: 2202705
|
|
Holac Meat Dicer. Model RA121. S/N 2202705.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hobart Cutter Mixer
|
|
Mfg: Hobart
|
Model: Vcm-40
|
|
Stock No: NGMS123b.8
|
Serial No: U76-25459
|
|
Hobart Cutter Mixer. Model VCM-40. S/N U76-25459.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Onion Slicer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 7a-SC-4661
|
Serial No:
|
|
Onion slicer, no mfg. Tag.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Martin Onion Slicer
|
|
Mfg: Martin
|
Model: MOVS-5000-H
|
|
Stock No: 15-SC-3661
|
Serial No:
|
|
Martin onion slicer, model no. MOVS-5000-H (missing parts).
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Martin Onion Slicer
|
|
Mfg: Martin
|
Model: MOVS-5000-H
|
|
Stock No: 15-SC-8561
|
Serial No:
|
|
Martin onion slicer, model no. MOVS-5000-H with work platform (missing parts).
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hobart Meat Slicer
|
|
Mfg: Hobart
|
Model: 1712E
|
|
Stock No: 12a.GR705.1
|
Serial No: 561-042-956
|
|
Hobart Meat Slicer. Model 1712E. S/N 561-042-956. 1/2 hp, 115 V, Single Phase, 1725 rpm, 11 3/4 in Dia, 26 in L x 26 in. W x 25 in. H. Suitable for parts only.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hobart Meat Slicer
|
|
Mfg: Hobart
|
Model: 1712E
|
|
Stock No: 3.GR805.a
|
Serial No:
|
|
Hobart Meat Slicer. Model 1712E. S/N 561-054-048. 1/2 hp, 115 V, Single Phase, 1,725 rpm,11-3/4 in. Dia, 26 in. L x 26 in. W x 25 in. H.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Urschel Dicer
|
|
Mfg: Urschel
|
Model: G-A
|
|
Stock No: ANSA002.
|
Serial No: 3291
|
|
Urschel Dicer. Model G-A, S/N 3291. U.S. Motor: 2 hp, 1,730 rpm, 6.0/3.0 amps, 60 Hz, 3 phase. Crosscut knife cut sizes: 1/2 in. Circular knife cut sizes: 3/4 in. Slice thickness range: 1/8 in. to 5/8 in. Urschel Model G-A uniformly cuts dices, straight french fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables. A wide selection of interchangeable cutting parts enables the user to obtain gentle, clean cutting through a wide range of sizes at high production capacities. The Model G-A features continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance. Maximum input product size is 5-1/2 in. (139.7 mm) in any dimension. Overall dimensions: 60 in. L x 29 in. W x 50 in. H. (ACN314). SOLD
|
|
Click here for more information (416.2 KB)
|
|
|
Click On Picture
|
SOLD Urschel Dicer, Model G
|
|
Mfg: Urschel
|
Model: G
|
|
Stock No: HDBA076.74a
|
Serial No: 1162
|
|
Urschel Dicer. Model: G. S/N: 1162. 304 and 316 stainless steel internal components. Product is fed through a 19 in. L x 15 in. W hopper. Crosscut knife cut sizes: 3/4 in. Circular knife cut sizes: 1/2 in. Slice thickness range: 1/8 in. to 5/8 in. Reliance Motor, 2 hp, 1770/1760/1755/1470/1465, 230/460-208/416-200/400-208/416-200/400 V, 5.3/2.65-5.6/2.8-5.7/2.85-6/3 amps, 60/50 Hz, 3 phase. Versatile three-dimensional cutter capable of producing uniform dices. Features continuous operation for uninterrupted production and simplified design for easy cleanup and maintenance. Overall dimensions: 61 in. L x 20 in. W x 30 in. H. SOLD
|
|
Click here for more information (394.1 KB)
|
|
|
Click On Picture
|
SOLD Hobart Meat Saw
|
|
Mfg: Hobart
|
Model: 5801 / 1-3
|
|
Stock No: 25.CS001
|
Serial No: 27-1040-458
|
|
|
|
Click On Picture
|
SOLD Hobart Meat Slicer
|
|
Mfg: Hobart
|
Model: 5801D
|
|
Stock No: 30.CS348a.13a
|
Serial No: 99-231-983
|
|
Hobart Meat Slicer, Model 5801D, Serial Number 99-231-983, 3 HP 208 / 240V 3450 RPM, 75 in H x 44 in W x 40 in L. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hobart Meat Saw
|
|
Mfg: Hobart
|
Model: 5801
|
|
Stock No: 25.CS355a.16
|
Serial No: 99-228-927
|
|
|
|
Click On Picture
|
SOLD Qualheim Produce & Cheese Slicer/Shredder
|
|
Mfg: Qualheim
|
Model: 200
|
|
Stock No: EECS038.4
|
Serial No: Q49303H
|
|
Qualheim Produce & Cheese Slicer/Shredder. Model: 200, S/N: Q49303H. Shredding plate: 12 in. dia. Product inlet (oval-shaped): 6 in. major dia., 4 in. minor dia., Product outlet: 4 1/2 in. L x 2 1/2 in. W. Motor specifications: Cat. # 21D11, 3/4 hp, 115 V, 11.2 amp, 1 phase, 60 cycles. Machinery on casters. Overall dimensions: 34 in. L x 24 in. W x 61 in. H. SOLD
|
|
Click here for more information (198.0 KB)
|
|
|
Click On Picture
|
SOLD Berkel Meat Cutter
|
|
Mfg: Berkel
|
Model: 705
|
|
Stock No: KBMW100.1a
|
Serial No: 9234
|
|
Berkel Meat Cutter. Model: 705. S/N: 9234. (1) 2-1/4 in. dia. x 9-1/4 in. L Blade. Unit specifications: 1/2 hp, 1725 rpm, 115 V, 7.6 amps, 60 Hz, single phase. Overall dimensions: 16 in. L x 12 in. W x 16 in. H. SOLD
|
|
Click here for more information (202.7 KB)
|
|
|
Click On Picture
|
SOLD General Machinery Corporation Hydrauflaker Slicer
|
|
Mfg: Hydrauflaker
|
Model:
|
|
Stock No: DBPF2001.23
|
Serial No:
|
|
General Machinery Corporation Hydrauflaker Slicer. Model: HYK 10/1. Rotating cutting drum dimensions: 13 in. dia. x 29 in. L. Maximum aperture/clearance: 30 in. L x 5-1/2 in. H. Cutting temperatures: 15 to 25 °F. Toshiba Motor, 10 hp, 1745 rpm, 230/460 V, 26.8/13.4 amps, 60 Hz, 3 phase. The Hydrauflaker was designed for flaking/slicing of hard or frozen blocks of meat, poultry, fish, fruit, chocolate, vegetables, etc. It has a built in loading table with air-operated ram feed system. The rotating cutting drum avoids shredding or pulverizing product. Inlets: (1) 30 in. L x 5-1/2 in. H infeed. Outlets: (1) 30-1/2 in. L x 9 in. W discharge. Overall dimensions: 84-1/2 in. L x 40 in. W x 89 in. H. SOLD
|
|
Click here for more information (517.0 KB)
|
|
|
|
|
