Genemco Sells Used Hoppmann Incline Elevators, Stainless Steel Incline Elevator, Shibuya Hoppmann Elevating Prefeeders, Incline Conveyors at affordable Prices  
 Genemco : Offers Shibuya Hoppmann Elevating Prefeeders, Stainless Steel Incline Elevator and Incline Conveyor Systems at Competitive Prices. 

Click On Picture

Stainless Steel Incline Conveyor - 18 in. wide

Stainless Steel Incline Conveyor - 18 in. wide
Mfg: Not Specified Model:
Stock No: BDPC044.5a Serial No:
Stainless Steel Incline Conveyor. 18 in. W x 9 ft. L flighted intralox belt, 3 in. H flights, spaced 14 1/2 in. apart, hydraulic drive, 102 in. discharge height.

Click here for more information (133.2 KB)

Click On Picture

Stainless Steel Incline Conveyor - 18 in. wide

Stainless Steel Incline Conveyor - 18 in. wide
Mfg: Not Specified Model:
Stock No: BDPC045.5a Serial No:
Stainless Steel Incline Conveyor. 18 in. W x 9 ft. L flighted intralox belt, 3 in. H flights, spaced 14 1/2 in. apart, hydraulic drive, 102 in. discharge height w/ pneumatic gate.

Click here for more information (69.3 KB)

Click On Picture

Stainless Steel Slight Incline Conveyor - 12 in. wide

Stainless Steel Slight Incline Conveyor - 12 in. wide
Mfg: Not Specified Model:
Stock No: BDPC046.5a Serial No:
Stainless Steel Slight Incline Conveyor. 12 in. W x 18 ft. L flighted belt, 1 in. H flights, spaced 12 in. apart, 4 in. side walls, hydraulic drive.

Click here for more information (51.2 KB)

Click On Picture

Conveyor

Conveyor
Mfg: Not Specified Model:
Stock No: NOI1119 Serial No:
Conveyor. U.S. Electrical motor: .75 hp, 1750 rpm, 208-230/460 v, 2.8-2.8/1.4 a, 60 Hz, 3 phase. U.S. Electrical motor drive: 1 max input hp, 966 max output torque. Belt dimensions: 11 ft. 6 in. L x 11-3/4 in. W. Overall dimensions: 5 ft. 11 in. L x 2 ft. W x 3 ft. 4 in. H.

Click here for more information (265.6 KB)

Click On Picture

Incline Conveyor

Incline Conveyor
Mfg: Not Specified Model:
Stock No: NOI1116 Serial No:
Incline Conveyor. U.S. Electrical motor: 1/2 hp, 1745 rpm, 208-230/460 V, 1.9-2.0/1.0 A, 60 Hz, 3 phase. Belt dimensions: 24 ft. L x 11 in. W. Overall dimensions: 10 ft. 1/2 in. L x 3 ft. W x 8 ft. H.

Click here for more information (234.0 KB)

Click On Picture

Vertical Bucket Elevator

Vertical Bucket Elevator
Mfg: Not Specified Model:
Stock No: MRSP114 Serial No:
Vertical Bucket Elevator. w/ air vibrator hopper. Approximately 18 ft. tall w/ discharge chute. Bucket size: 6 ½ in. L x 2 ½ in. W. Reliance duty master motor, ½ hp, 1725 rpm, 230/460 V, 2.2/1.1 amps, 60 Hz, 3 phase. Access doors: (1) 2 ft. 10 in. L x 1 ft. 10 in. W, (1) 1 ft. 8 in. L x 10 in. W. Inlets/Outlets: (1) 1 ft. L x 1 ft. W, (1) 10 in. l x 10 in. W, (2) 4 in. dia. dust ports. Overall dimensions: 5 ft. 5 in. L x 5 ft. 2 in. W x 18 ft. H. (BH).

Click here for more information (267.9 KB)

Click On Picture

Vertical Bucket Elevator

Vertical Bucket Elevator
Mfg: Not Specified Model:
Stock No: MRSP115 Serial No:
Vertical Bucket Elevator. w/ air vibrator hopper. Approximately 18 ft. tall w/ discharge chute. Bucket size: 6 ½ in. L x 2 ½ in. W. Reliance duty master motor, ½ hp, 1725 rpm, 230/460 V, 2.2/1.1 amps, 60 Hz, 3 phase. Access doors: (1) 2 ft. 10 in. L x 1 ft. 10 in. W, (1) 1 ft. 8 in. L x 10 in. W. Inlets/Outlets: (1) 1 ft. L x 1 ft. W, (1) 10 in. l x 10 in. W, (2) 4 in. dia. dust ports. Overall dimensions: 5 ft. 5 in. L x 5 ft. 2 in. W x 18 ft. H.(H16).

Click here for more information (314.9 KB)

Click On Picture

1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator

1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator
Mfg: Universal International, Inc. / Universal Industries Model: U2-800
Stock No: MRSP123 Serial No: 74060-2
1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator. Model: U2-800. Capacity of free flowing material @ 85% Bucket fill: 800 ft3/h. Bucket spacing: 5 in. Bucket size: 7 in. L x 4 ½ in. W x 4 in. Deep. Infeed: 8 in². Discharge: 10 in². Belt speed: 168 FPM. Belt width: 8 in. Baldor Electric motor, 1 hp, 1725 rpm, 208-230/460 V, 3.6-3.4/1.7 amps, 60 Hz, 3 phase. Dodge torque arm speed reducer, ratio: 15.35. Final rpm: 112. U2 series bucket elevators applications include hot, abrasive, heavy, corrosive, hygroscopic and wet materials, and also features an exclusive “easy dump” design. (1) Access 10 in W x 7 in. H access door. Inlet: (1) 8 in. W x 8 in. H port, (1) 4 in. dia. side access port. Outlets: (2) 8 in. dia. port. Overall dimensions: 5 ft. 4 in. L x 2 ft. 8 in. W x 18 ft. 6 in. H.(H16)(ACN92).

Click here for more information (409.6 KB)

Click On Picture

1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator

1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator
Mfg: Universal International, Inc. / Universal Industries Model: U2-800
Stock No: MRSP124 Serial No: 74060-3
1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator. Model: U2-800. Capacity of free flowing material @ 85% Bucket fill: 800 ft3/h. Bucket spacing: 5 in. Bucket size: 7 in. L x 4 ½ in. W x 4 in. Deep. Infeed: 8 in². Discharge: 10 in². Belt speed: 168 FPM. Belt width: 8 in. Baldor electric motor, 1 hp, 1725 rpm, 208-230/460 V, 5.8 – 5/2.5 amps, 60 Hz, 3 phase. Dodge torque arm speed reducer, ratio: 15.35. Final rpm: 112. U2 series bucket elevators applications include hot, abrasive, heavy, corrosive, hygroscopic and wet materials, and also features an exclusive “easy dump” design. (1) access 10 in W x 6 in. H. access door. Inlet: (1) 8 in. W x 8 in. H port, (1) 4 in. dia. side access port. Outlets: (2) 8 in. dia. port. Overall dimensions: 5 ft. 5 in. L x 2 ft. 9 in. W x 18 ft. 6 in. H.(H16)(ACN92).

Click here for more information (232.0 KB)

Click On Picture

1990 Universal International, Inc. / Universal Industries Vertical Bucket Elevator

1990 Universal International, Inc. / Universal Industries Vertical Bucket Elevator
Mfg: Universal International, Inc. / Universal Industries Model: U1-630
Stock No: MRSP125 Serial No: 59705
1990 Universal International, Inc. / Universal Industries Vertical Bucket Elevator. Model: U1-630. Capacity of free flowing material @ 75% Bucket fill: 630 ft3/h. Bucket spacing: 4 ½ in. Buckets size: 6 in. x 4 in. Belt Speed: 270 fpm. Belt width: 6 ½ in. Baldor Electric motor, 1-½ hp, 1740 rpm, 230/460 V, 4.2/2.1 amps, 60 Hz, 3 phase. Dodge torque arm speed reducer, ratio: 25.54. Final rpm: 68. U1 series bucket elevators applications include hot, abrasive, heavy, corrosive, hygroscopic and wet materials, and also features an exclusive “easy dump” design. Inlet: (1) 8 in. W x 1 ft. 1 ½ in. H port, (1) 7 ½ in. W x 11 ½ in. H port. (1) 3-½ in. side access port. Outlets: (1) 8 in. W x 9 in. H port. Overall dimensions: 4 ft. 9 in. L x 1 ft. W x 18 ft. 9 in. H.(H16)(ACN55).

Click here for more information (291.0 KB)

Click On Picture

Hobart Vertical Portable Screw Conveyor

Hobart Vertical Portable Screw Conveyor
Mfg: Hobart Model: SC90
Stock No: BABR122.2a Serial No:
Hobart Portable Vertical Screw Conveyor. Model: SC90. Baldor electric motor, 2 hp, 1750 rpm, 208-230/460 V, 6.3-5.8/2.9 amps, 60 HZ, 3 phase. Inlet: (1) 5 in. hose quick connect. Screw conveyor dimensions: 9 in. dia. x 5 ft. 4 in. H. Outlet: 1 ft. 7 in. L x 8-7/8 W x 6-1/2 in. H. Overall dimensions: 2 ft. 7-5/8 in. L x 2 ft. W x 7 ft. 2-1/2 in H.

Click here for more information (305.6 KB)
Click here for more instruction manual (3,552.6 KB)

Click On Picture

Stainless Steel Conveyor.

Stainless Steel Conveyor.
Mfg: Not Specified Model:
Stock No: DENF002. Serial No:
Stainless Steel Conveyor. Belt width: 11 in. Maximum aperture/clearance above belt. Cleat height: 1-1/2 in. Distance between cleats: 18-1/2 in. Dayton Motor, 1/2 hp, 3450 rpm, 115/230 V, 80/40 amps, 60 Hz, 3 phase. Motor Drive. Infeed height: 27 in. Exit height: 67 in. Overall dimensions: 72 in. L x 26 in. W x 72 in. H.

Click here for more information (254.1 KB)

Click On Picture

Meyer Industries Garroutte Closed Pocket Machine Elevator

Meyer Industries Garroutte Closed Pocket Machine Elevator
Mfg: Meyer Industries Garroutte Model: Pocket Elevator
Stock No: SGM3016.40a Serial No: 974
Meyer Industries Garroutte Closed Pocket Machine Elevator. Model: Pocket Elevator. S/N: 974. Belt width: 9-1/2 in. Maximum aperture/clearance above belt: 8 in. L x 6 in. W. Distance between cleats: 7-1/2 in. L. Belt type: Intralox S800 Series, 10.3 PD. Baldor Industrial Motor, 1 hp, 1725 rpm, 230/460 V, 3.2/1.6 amps, 60 Hz, 3 phase. Grove Gear Speed Reducer, 100 ratio, 17.50 rpm (final). Meyer Electromagnetic Vibrator, Model: MFN 11.1/2.6 x 3.0, S/N: 1527, tray dimensions: 11-1/2 in. W x 3 ft. 6 in. L. Meyer Control Panel, Model: 8849-1, S/N: 856, power supply: 480 V, 20 amps, 60 Hz, 3 phase. Variable speed controls. BLH Electronics Inc. LCp-100 Expert Series Weight Processor and Weigh Bars, Model: KIS-2, S/N's: 10675, 10678, 10683, 10697, capacity: 3,300 lbs (15 kN). Inlets: (1) 3 ft. L x 2 ft. 6 in. W infeed. Outlets: (1) 8 in. L x 7 in. W discharge. Overall dimensions: 13 ft L x 3 ft. 6 in. W x 6 ft. H. (ACN439).

Click here for more information (414.1 KB)

Click On Picture

Stainless Steel Rectangular Tank with Dewatering / Elevator Conveyor - 550 Gallon

Stainless Steel Rectangular Tank with Dewatering / Elevator Conveyor - 550 Gallon
Mfg: Not Specified Model:
Stock No: 55.TAPG16b.7a Serial No:
Stainless Steel Dewatering Elevator with Tank- 550 Gallon. Inside straight-wall dimensions: (2) 3 ft. 10 in. L x 3 ft. W x 3 ft. 4 in. H. compartments. Conveyor infeed height: 4 ft. Conveyor exit height: 8 ft. 9 in. Inlets: (2) 3 in. dia. NPT, (1) 4 in. dia. NPT. Outlets: (1) 3 in. dia. NPT discharge. Overall dimensions: 11 ft. 6 in. L x 3 ft. 6 in. W x 10 ft. H.

Click here for more information (276.3 KB)

Click On Picture

Elevated Conveyor with Wash Tank- 320 Gallon

Elevated Conveyor with Wash Tank- 320 Gallon
Mfg: Not Specified Model:
Stock No: OI161. Serial No:
Elevated Conveyor with Wash Tank- 320 Gallon. Maximum aperture/clearance above belt: 24 in. W x 3 in. H. Conveyor width: 24 in. Height at conveyor outlet: 80 in. Wash tank is equipped with spray bridge. Sprayer dimensions: 1-1/4 in. L x 3/16 in. W. Inlets: (1) 2 in. dia. PVC spray bridge feed line, (1) 3-1/2 in. dia. (tank). Outlets: (1) 4 in. dia. NPT (female valve). Overall dimensions: 23 ft. 9 in. L x 36 in. W x 83 in. H.

Click here for more information (368.8 KB)

Click On Picture

Elevated Stainless Steel Belt Conveyor

Elevated Stainless Steel Belt Conveyor
Mfg: Not Specified Model:
Stock No: SDYC011. Serial No:
Elevated Stainless Steel Belt Conveyor. Belt width: 10 in. Conveyor features adjustable side guiderails and (4) casters for easy positioning. Infeed/exit height: 37/50 in. U.S. Motor, 1 hp, 1750 rpm, 208-230/460 V, 3.3-3.4/1.7 amps, 60 Hz, 3 phase. Sycrogear Motor Drive, 84 rpm (final). Overall dimensions: 98 in. L x 26 in. W x 52-1/2 in. H.

Click here for more information (206.1 KB)

Click On Picture

Arrowhead Conveyor Company Bottle Elevator

Arrowhead Conveyor Company Bottle Elevator
Mfg: Arrowhead Conveyor Model: GRIPPER S-EL
Stock No: GM370.1 Serial No:
Arrowhead Conveyor Company Bottle Elevator. Model: GRIPPER S-EL. P.O: CSC 0109. S/O and Equip No: 076760SE. Line No: 301. Lines per chain: 238. Maximum opening width: 12 in. Sew-Eurodrive Motor (aperture), 3 hp, 1700 rpm, 230/460 V, 8.6/4.3 amps, 60 Hz, 3 phase. Sew-Eurodrive Variable Speed Reducer, 10.50 ratio, 44/217 rpm (min/max). Conveyor infeed height: 3 ft. Conveyor exit height: 11 ft. Overall dimensions: 8 ft. 10 in. L x 3 ft. 5 in. L x 11 ft. 4 in. H.

Click here for more information (270.7 KB)

Click On Picture

Stainless Steel Inclined Product Conveyor Section

Stainless Steel Inclined Product Conveyor Section
Mfg: Not Specified Model:
Stock No: MDFP187.2 Serial No:
Stainless Steel Inclined Product Conveyor Section. Stainless Steel Belt, Drive and Aluminum Ceiling Bracket Support. Conveyer belt dimensions: 16 ft. L x 2 ft. 2 in. W. Overall dimensions: 16 ft. 7 in. L x 4 ft. 4 in. W x 1 ft. 3 in. H.

Click On Picture

FMC Bucket Elevator, Stainless Steel

SOLD FMC Bucket Elevator, Stainless Steel
Mfg: FMC Technologies (JBT FoodTech) Model:
Stock No: 15-SC-7561 Serial No:
FMC Bucket Elevator. Model ALH, S/N 1183. Stainless steel. Lift: 14 ft. (no buckets). Belt width: 12 in.

SOLD

Click On Picture

SOLD Elevated Conveyor Stainless Steel   SOLD

SOLD Elevated Conveyor Stainless Steel
Mfg: Loma Cintex Model:
Stock No: 36.GM-625.12 Serial No:
Elevated conveyor with stainless steel chute and Loma Superscan metal detector 925296/925532.

SOLD

Click On Picture

SOLD Elevated Conveyor Stainless Steel  SOLD

SOLD Elevated Conveyor Stainless Steel
Mfg: Loma Cintex Model:
Stock No: 35.GM-623.9 Serial No:
Elevated conveyor with stainless steel chute, Loma IC Metal Detector 925260/925929, 5-7/8 in. H x 19-3/4 in. L x 11-3/4 in. deep, 4-3/4 in. clearance above belt, belt is a slotted belt with slot dimensions 15 in. W x 18 in. L with 2 in. H (vertical lips), 10 ft. total height, 9 ft. 3 in. to highest point on belt.

SOLD

Click here for more information (330.2 KB)

Click On Picture

SOLD Laughlin Belt Incline Conveyor SOLD

SOLD Laughlin Belt Incline Conveyor
Mfg: Laughlin Model:
Stock No: L49108.1a Serial No:
Laughlin belt incline conveyor, stainless steel frame, rubber belt 12 inch width x 205 inch length, overall 22 inch width x 205 inch length x 43 inch height, baldor motor cat#CWDL5507 0.75hp 1725rpm 1ph.

SOLD

Click On Picture

SOLD Incline Belt Conveyor Stainless Steel SOLD

SOLD Incline Belt Conveyor Stainless Steel
Mfg: Not Specified Model:
Stock No: 19a.L49107.1a Serial No:
Inclined belt conveyor stainless steel frame, plastic cleated belt 12 inch width x 146 inch length, overall 79 inch height x 48 inch width x 146 inch length, Baldor motor serial no. 5895 3ph .5hp 1725rpm.

SOLD

Click On Picture

SOLD Incline Conveyor Stainless Steel SOLD

SOLD Incline Conveyor Stainless Steel
Mfg: Not Specified Model:
Stock No: 10-SC-0251 Serial No:
Incline conveyor stainless steel frame, Plastic belting 15 in. wide x 11 ft. long. Infeed height is roughly 12 in. and discharge height is about 40 in.

SOLD

Click On Picture

SOLD 2 - Incline Stainless Steel Augers and Cross Feed Auger SOLD

SOLD 2 - Incline Stainless Steel Augers and Cross Feed Auger
Mfg: Not Specified Model:
Stock No: CCFP145b. Serial No:
(2 ) Incline Stainless Steel Augers. Auger #1 - 10 in. trough, 9 in. auger, 23 ft. long, 2 hp. drive. Auger #2 - 10 in. trough, 9 inch auger, 20 ft. long, 1.5 hp. drive. Used to convey pressing waste from two Jones presses into cross feed auger with 13 in. trough, 12 in. auger, 24 ft. long, 1.5 hp drive that moves waste product to outside container.

SOLD

Click here for more information (196.7 KB)

Click On Picture

SOLD 2 - Incline Stainless Steel Augers and Cross Feed Auger SOLD

SOLD 2 - Incline Stainless Steel Augers and Cross Feed Auger
Mfg: Not Specified Model:
Stock No: CCFP144b. Serial No:
(2 ) Incline Stainless Steel Augers. Auger #1 - 10 in. trough, 9 in. auger, 23 ft. long, 2 hp. drive. Auger #2 - 10 in. trough, 9 inch auger, 20 ft. long, 1.5 hp. drive. Used to convey pressing waste from two Jones presses into cross feed auger with 13 in. trough, 12 in. auger, 24 ft. long, 1.5 hp drive that moves waste product to outside container.

SOLD

Click here for more information (173.1 KB)

Click On Picture

SOLD Incline Belt Conveyor SOLD

SOLD Incline Belt Conveyor
Mfg: Not Specified Model:
Stock No: 35.L49102.2 Serial No:
Incline belt conveyor, stainless steel frame, overall 110 inch length x 43 inch width x 47 inch height, transport area 24 inch width x 108 inch length x 32 inch height, leg height adjustable, Baldor motor cat#VWDM3538 3ph 0.5hp 1725rpm.

SOLD

Click On Picture

SOLD Cleated Incline Conveyor SOLD

SOLD Cleated Incline Conveyor
Mfg: Not Specified Model:
Stock No: DSBI122.2a Serial No:
Cleated Incline Conveyor. Belt width: 16 in. Cleat pitch: 14 in. W x 5 in. H. Height at conveyor inlet: 30 in. Height at conveyor outlet: 90 in. Conveyor moves on (4) casters for easy positioning. Motor, no nameplate information. Baldor Industrial Motor Drive: 40 ratio, 0.674 max hp (input), 1750 rpm (input), 680 in-lbs torque. Inlets/outlets: (1) 16 in. L x 14 in. W infeed, (1) 14 in. L x 7 in. W outlet chute. Overall dimensions: 13 ft. 3 in. L x 36 in. W x 94 in. H. Heat and Control Inc. Control Panel. Controls consist of an adjustable speed knob, emergency stop switch, and incline conveyor hand/off/auto switch. Overall dimensions: 24 in. L x 12 in. W x 31 in. H.

SOLD

Click here for more information (293.6 KB)

Click On Picture

SOLD Auger Feed Hopper, Stainless Steel SOLD

SOLD Auger Feed Hopper, Stainless Steel
Mfg: Not Specified Model:
Stock No: CCFP062b. Serial No:
Auger Feed Hopper. Stainless steel. Screw auger: 9 in. Allen Bradley 1336 Variable Speed Control. Auger diameter: 5.5 in. Auger shaft: 2 in. dia. Pitch thread: 5.75 in. Motor: 3 hp, 230/460 V. Gear reducer: 11.44:1. Hopper: 5 ft. L x 3 ft. W x 30 in. H. Product volume approx: 25 cu ft. With VFD, auger turns 0-150 rpm. Each rpm dispenses about 100 cu in. product. Overall dimensions: 10 ft. L x 4 ft. W.

SOLD

Click here for more information (252.6 KB)

Click On Picture

SOLD Vertical Lift Incline Conveyor SOLD

SOLD Vertical Lift Incline Conveyor
Mfg: Not Specified Model:
Stock No: DSBI127.3 Serial No:
Vertical Lift Incline Conveyor. Maximum aperture/clearance above belt: 16-1/2 in. W x 4 in. H. Baldor Washdown Duty Motor, 1/2 hp, 1725 rpm, 208/460 V, 1.6/0.8 amps, 60 Hz, 3 phase. Dayton Motor Drive, 60:1 ratio, 28.75 rpm (final). Inlets: (1) 32 in. W x 12 in. H in-feed hopper. Overall dimensions: 17 ft. L x 36 in. W x 43 in. H.

SOLD

Click here for more information (233.1 KB)

Click On Picture

SOLD Vetra Lift Bucket Conveyor, Stainless Steel SOLD

SOLD Vetra Lift Bucket Conveyor, Stainless Steel
Mfg: Vetra Lift Model:
Stock No: ED-277.1 Serial No:
Vetra Lift Bucket Conveyor. Stainless steel.

SOLD

Click On Picture

SOLD Portable Elevator/Hopper, Stainless Steel SOLD

SOLD Portable Elevator/Hopper, Stainless Steel
Mfg: Not Specified Model:
Stock No: HDPH107.5a Serial No:
Portable Elevator/Hopper. Stainless steel. Cleated conveyor. Front sliding door: 17-1/2 in. W x 18 in. H. Product drop: 96 in. H. Conveyor: 19-1/2 in. W. Inside dimensions: 38 in. L x 42 in. W x 40 in. H. Cleat spacing:11-3/4 in. Overall dimensions: 80 in. L x 44-1/2 in. W x 93-1/2 in. H.

SOLD

Click here for more information (206.9 KB)

Click On Picture

SOLD Transfer Inclined Cleated Conveyor SOLD

SOLD Transfer Inclined Cleated Conveyor
Mfg: Not Specified Model:
Stock No: DPFI312.a Serial No:
Transfer Inclined Cleated Conveyor. Maximum aperture/clearance above belt: 18 in. W x 2 in. H. Height at conveyor inlet: 34 in. Height at conveyor outlet: 64 in. Effective belt length: 69 in. Infeed hopper dimensions: 20 in. L x 15 in. W. Product area between cleats: 135 in. sq. Stainless steel frame with (4) casters for easy positioning. Overall dimensions: 75 in. L x 38-1/2 in. W x 69 in. H.

SOLD

Click here for more information (281.1 KB)

Click On Picture

Incline Conveyor, Stainless Steel

SOLD Incline Conveyor, Stainless Steel
Mfg: Not Specified Model:
Stock No: OI120. Serial No:
Incline Conveyor. Stainless steel. Maximum aperture/clearance above belt: 14 in. W x 4 in. H. Conveyor inlet: 25 in. H. Conveyor outlet: 93 in. H. Woods E-Trac AC Inverter: 3 hp. Spray bridge. Baldor Industrial Motor 3/4 hp, 1,725 rpm, 208-230/460 V, 2.3-2.2/1.1 amps, 60 Hz, 3 phase. Boston Motor Drive. Casters for easy positioning. Overall dimensions: 12 ft. 3 in. L x 40 in. W x 93 in. H.

SOLD

Click here for more information (337.6 KB)

Click On Picture

1999 Hoppmann Stainless Steel Escalator

SOLD 1999 Hoppmann Stainless Steel Escalator
Mfg: Hoppmann Model: EP35/18 CRS
Stock No: ENAE65054. Serial No: 7337380
1999 Hoppmann Stainless Steel Escalator. Model EP35/18 CRS. S/N 7337380. Hopper has lexan guarding with a hinged lid. Approx. hopper dimensions: 5 ft. L x 6 ft. W x 3 ft. deep. Approximate discharge height: 62 in. Belt is approx. 8 in. wide with 3 in. high cleats. Overall dimensions 10 ft. L x 6 ft. W x 9 ft. H.

SOLD

Click here for more information (165.9 KB)

Click On Picture

Norwalt Design Stainless Steel Material Handling Elevator

SOLD Norwalt Design Stainless Steel Material Handling Elevator
Mfg: Norwalt Design Model:
Stock No: ENAE65056. Serial No: H1838-2
Norwalt Design Stainless Steel Material Handling Elevator. S/N H1838-2. Escalator has lexan guarding. Approx. hopper dimensions: 44 in. L x 49 in. W x 2 ft. deep. Approximate discharge height: 7 ft. Belt is approx. 10-1/2 in. wide with 2 in. high cleats. Painted steel base. Motor: 1/4 hp, 1750 rpm, 90 V, 2.5 amps. Overall dimensions: 8 ft. L x 5 ft. W x 104 in. H.

SOLD

Click here for more information (122.1 KB)

Click On Picture

Norwalt Design Stainless Steel Escalator

SOLD Norwalt Design Stainless Steel Escalator
Mfg: Norwalt Design Model: H1622-2
Stock No: ENAE65057. Serial No:
Norwalt Design Stainless Steel Material Handling Elevator. S/N H1622-2. Elevator has lexan guarding. Approx. hopper dimensions: 44 in. L x 49 in. W x 2 ft. deep. Approximate discharge height: 7 ft. Belt is approx. 10-1/2 in. wide with 2 in. high cleats. Painted steel base. Overall dimensions: 8 ft. L x 5 ft. W x 104 in. H.

SOLD

Click here for more information (154.4 KB)

Click On Picture

Custom Metal Designs 4 ft. Air Elevator Conveyor

SOLD Custom Metal Designs 4 ft. Air Elevator Conveyor
Mfg: Custom Metal Designs Model:
Stock No: HDCD158.3a Serial No:
Custom Metal Designs 4 ft. Air Elevator Conveyor. Stainless steel (2) Reliance motors, 10 hp, 1725 rpm, 208-230/460 V, 2.8-2.8/1.4 amps, 60 Hz, 3 phase. (2) Dodge Quantis motor drives, 27.97 ratio, input: 1750 maximum, output power: 1.26 hp maximum, output: 61.67 rpm. Manual adjustable clearance: 3 in. W minimum; 13 in. W maximum. Hold belt system: 1-1/2 in. L x 1-1/4 in. W x 3-1/2 in. H. Conveyor entry: 30 in. H; exit: 85 in. H. Control box: on/off switch, start, stop, run, local/remote. Overall dimensions: 10 ft. L x 53 in. W x 96 in. H.

SOLD

Click here for more information (363.4 KB)

Click On Picture

1999 Dual Vertical Lift Conveyor With Hopper

SOLD 1999 Dual Vertical Lift Conveyor With Hopper
Mfg: Finish Food Processing Equipment Model:
Stock No: SSLP478.12a Serial No:
1999 Finish Food Processing Equipment, Dual Vertical Lift Conveyor With Hopper. Type: VEW.2X250. Order: 1652. Stainless steel body. Hopper dimensions: 76 in. L x 45-3/4 in. W x 21-1/2 in. H. Bottom hopper opening: 21-1/2 in. L x 6-1/2 in W. Belt dimensions: 9-3/4 in. W x 87-1/2 in. H. Belt clearance: 9-3/4 in. L x 5-1/2 in. W. Electrical: 460 V, 60 Hz, 3 phase. (2) Vector motors, 220-240/380-415 & 240-266/415-460 V, 3.05/1.75 & 2.75/1.59 amps, 50 & 60 Hz. Final rpm on the gear drive is 67 rpm. Drive pulley is 6 in. Feet per minute on the conveyor is 105 ft. per minute. Belt cleat height is 3 in. (2) Doors on each side. (2) Air operated top chute doors: 10 in. W x 30 in. H. Outlet: 2-1/2 in. threaded male with valve. Overall dimensions: 110 in. L x 50 in. W x 11 ft. 3 in. H.

SOLD

Click here for more information (257.5 KB)

Click On Picture

1999 Frazier & Son Bucket Elevator

SOLD 1999 Frazier & Son Bucket Elevator
Mfg: Frazier and Son Model: CBT
Stock No: DSBI116.3a Serial No: 99L5416
1999 Frazier & Son Bucket Elevator. Model: CBT, S/N: 99L5416. 304 Stainless steel. Elevator transfers buckets vertically and horizontally. This particular machine was manufactured to convey frozen ravioli and tortellini at a capacity of 490 cu ft/hr. Poly bucket. Model: CBT-2: 15 in. L x 7-1/2 in. W. Conveyor inlet: 42 in. H. Conveyor outlet: 10 ft. 3 in. H. Bottom base has adjustable height. Movement provided by (2) chain belts. 1999 Frazier & Son Bucket Elevator Control Panel. Overall dimensions: 20 ft. L x 39 in. W x 11 ft. 8 in. H. ACN566

SOLD

Click here for more information (415.3 KB)

Click On Picture

AC Horn Incline Conveyor

SOLD AC Horn Incline Conveyor
Mfg: Not Specified Model:
Stock No: 25.L49106.1a Serial No:
AC Horn Incline Conveyor. Stainless steel frame. Plastic belt dimensions: 54 in. L x 36 in. W. Baldor motor: 3 phase, 5 hp, 17.25 rpm. Overall dimensions: 58 in. L x 55 in. W x 44 in. H.

SOLD

Click On Picture

Elevated Conveyor, Stainless Steel

SOLD Elevated Conveyor, Stainless Steel
Mfg: Not Specified Model:
Stock No: 514 Serial No:
Elevated Conveyor. Stainless steel. Conveyor dimensions: 160-1/2 in. L x 25 in. W. Inside: 21 in. W x 12 in. H. Conveyor height: low end- 38 in. H.; high end-11 ft. H. Base dimensions: 29 in. L x 29 in. W. Overall dimensions: 128 in. L x 33 in. W x 140 in. H.

SOLD

Click here for more information (282.1 KB)

Click On Picture

Hydraulic Incline Conveyor

SOLD Hydraulic Incline Conveyor
Mfg: Not Specified Model:
Stock No: 25.1R-194.5a Serial No:
Hydraulic Incline Conveyor. Stainless steel frame. Flighted Intralox belt: 13 ft L x 36 in. W.

SOLD

Click here for more information (230.0 KB)

Click On Picture

Norwalt Design Inc. Incline Elevator

SOLD Norwalt Design Inc. Incline Elevator
Mfg: Norwalt Design Model:
Stock No: ENAE006. Serial No: H1957-0
Norwalt Design Inc. Incline Elevator. S/N: H1957-0. Infeed hopper dimensions: 3 ft. 11 in. L x 3 ft. 6 in. H. Belt width: 10 in. Maximum aperture/clearance above belt: 9 in. W x 2 in. H. Cleat height: 2 in. Distance between cleats: 5-1/2 in. Baldor DC Motor, 1/4 hp, 1750 rpm, 90 V, 2.5 amps. Grove Gear Speed Reducer, 50 ratio, 35 rpm (final). Elevator infeed height: 3 ft. 4 in. Elevator exit height: 6 ft. 3 in. Inlets: (1) 3 ft. 11 in. L x 1 ft. 4-1/2 in. W infeed. Outlets: (1) 11 in. L x 7-1/2 in. W discharge. Overall dimensions: 7 ft. 8 in. L x 4 ft. 2-1/2 in. W x 8 ft. 7 in. H.

SOLD

Click On Picture

Stainless Steel Material Handling Elevator

SOLD Stainless Steel Material Handling Elevator
Mfg: Not Specified Model:
Stock No: ENAE65059. Serial No:
Stainless Steel Material Handling Elevator. Unit is equipped with lexan guarding. Approximate hopper dimensions: 5 ft. L x 44 in. W x 2 ft. deep. Approximate discharge height: 116 in. with approx. 2 ft. extension. Baldor Motor: 3/4 hp, 1750 rpm, 90 V, 7.6 amps. Boston Drive, 30 ratio, 980 in-lbs output torque, 58.3 final rpm. Overall dimensions 10 ft. L x 5 ft. W x 131 in. H.

SOLD

Click here for more information (247.6 KB)

Click On Picture

Stainless Steel Incline Conveyor

SOLD Stainless Steel Incline Conveyor
Mfg: Not Specified Model:
Stock No: ENAE65058. Serial No:
Stainless Steel Incline Conveyor. Maximum product width: 17-1/2 in. W. Belt cleat: 3 in. H. Gap between the paddles of the cleats: 12 in. Baldor Motor, 3/4 hp, 1750 rpm, 90 V, 7.6 amps. Infeed: 40-1/2 in. H. Exit height: 8 ft. 8 in. H. (2) 18 in. W x 18 in. H access doors. Hopper inner dimensions: 45 in. L x 41 in. W x 39 in. deep. Overall dimensions 8 ft. 10 in. L x 45 in. W x 117 in. H.

SOLD

Click here for more information (221.6 KB)

Click On Picture

Stainless Steel Incline Elevator

SOLD Stainless Steel Incline Elevator
Mfg: Not Specified Model:
Stock No: ENAE005. Serial No:
Stainless Steel Incline Elevator. Infeed hopper dimensions: 4 ft. L x 4 ft. H. Belt width: 20 in. Maximum aperture/clearance above belt: 20 in. W x 4 in. H. Cleat height: 4 in. Distance between cleats: 12 in. Baldor DC Motor, 1/2 hp, 1750 rpm, 90 V, 5.1 amps. Indiana Power Transmission Systems Inc., 30 ratio, 58.3 rpm (final). Elevator infeed height: 3 ft. 9 in. Elevator exit height: 6 ft. 1-1/2 in. Inlets: (1) 4 ft. L x 2 ft. 9 in. W infeed. Outlets: (1) 1 ft. 8 in. L x 1 ft. 2 in. W discharge. Overall dimensions: 7 ft. 8 in. L x 4 ft. 2-1/2 in. W x 8 ft. 7 in. H.

SOLD

Click here for more information (305.1 KB)

Click On Picture

1999 Shibuya Hoppmann Stainless Steel Elevating Prefeeder

SOLD 1999 Shibuya Hoppmann Stainless Steel Elevating Prefeeder
Mfg: Shibuya Hoppmann Model: EP-15
Stock No: ENAE46811F. Serial No: 37759
1999 Hoppmann (now Shibuya Hoppmann) Elevating Prefeeder. Model: EP-15. S/N: 37759. Stainless Steel Construction. Supply Hopper Capacity: 15 cu. ft. Belt width: 8 in. Supply Hopper dimensions: 3 ft. 7 ½ in. L x 3 ft. 6 ½ in. H. Maximum aperture/clearance above belt: 8 in. W x 2 in. H. Cleat height: 2 in. Distance between cleats: 5 ½ in. Bodine Electric Gearmotor, ¼ hp, 62 rpm (final), 130 V, 7.8 amps, 40 ratio. Elevator infeed height: 3 ft. 2 ½ in. Elevator exit height: 6 ft. 10 in. Hoppmann’s EP-15 elevating prefeeder is designed to handle medium sized parts. With a heavy duty variable speed motor and standard bowl level sensor, it ensures proper product metering. Designed for floor level parts loading. Standard electrostatic epoxy powder coat finish. Inlets: (1) 3 ft. 4 in. L x 2 ft. 2 in. W infeed. Outlets: (1) 11 in. L x 7 ½ in. W discharge. Overall dimensions: 8 ft. L x 3 ft. 6 ½ in. W x 9 ft. 3 in. H.(ACN52).

SOLD

Click here for Additional Information (846.7 KB)
Click here for more information (347.9 KB)

Click On Picture

MTC Inclined Auger Conveyor

SOLD MTC Inclined Auger Conveyor
Mfg: Materials Transportation Co. Model: MTCS-16-13
Stock No: ATGP003.4 Serial No: 7316
Materials Transportation Company Inclined Screw Auger Conveyor. Model: MTCS-16-13. S/N: 7316. Screw auger dimensions: 16 ft. L x 12 ft. 6 in. W. Pitch: 12 in. Baldor Wash-Down Duty Motor, 5 hp, 1750 rpm, 208-230/460 V, 13.8-13/6.5 amps, 60 Hz, 3 phase. Dodge Speed Reducer, 11.4 ratio, final speed: 153.5 rpm. Conveyor infeed height: 3 ft. 10 in. Conveyor exit height: 7 ft. 2 in. Inlets: 4 ft. 7 in. L x 3 ft. 7 in. W infeed. Outlets: 1 ft. 6 in. L x 1 ft. 3-1/2 in. W discharge. Overall dimensions: 14 ft. 3 in. L x 5 ft. 5 in. W x 9 ft. 6 in. H.

SOLD

Click here for more information (429.3 KB)
Click here for drawings (913.7 KB)

Click On Picture

Elevated Conveyor, Stainless Steel

SOLD Elevated Conveyor, Stainless Steel
Mfg: Not Specified Model:
Stock No: 35.513 Serial No:
Elevated Conveyor. Stainless steel. Conveyor buckets: 15-1/2 in. L x 4 in. W x 3-1/3 in. H. Fitter top: 36 in. L x 34 in. W x 34 in. H. Overall dimensions: 233 in. L x 40 in. W x 73 in. H.

SOLD

Click here for more information (239.2 KB)

Click On Picture

Arrowhead Conveyor Company Bottle Elevator

SOLD Arrowhead Conveyor Company Bottle Elevator
Mfg: Arrowhead Conveyor Model:
Stock No: GM370aa.1 Serial No:
Arrowhead Conveyor Company Bottle Elevator. Maximum aperture: 4 in. Maximum clearance: 9 in. Conveyor infeed height: 2 ft. 9 in. Conveyor exit height: 10 ft. 1 in. Overall dimensions: 10 ft. 11 in. L x 3 ft. 8 in. W x 11 ft. H.

SOLD

Click here for more information (280.3 KB)

Click On Picture

1999 Hoppmann (Shibuya Hoppmann) Elevating Prefeeder

SOLD 1999 Hoppmann (Shibuya Hoppmann) Elevating Prefeeder
Mfg: Shibuya Hoppmann Model: EP-15
Stock No: ENAE46811D. Serial No: 36098
1999 Hoppmann (now Shibuya Hoppmann) Elevating Prefeeder. Model: EP-15. S/N: 36098. Stainless Steel Construction. Supply Hopper Capacity: 15 cu. ft. Belt width: 8 in. Supply Hopper dimensions: 3 ft. 7 ½ in. L x 3 ft. 6 ½ in. H. Maximum aperture/clearance above belt: 8 in. W x 2 in. H. Cleat height: 2 in. Distance between cleats: 5 ½ in. Bodine Electric Gearmotor, ¼ hp, 62 rpm (final), 130 V, 7.8 amps, 40 ratio. Elevator infeed height: 3 ft. 2 ½ in. Elevator exit height: 6 ft. 10 in. Hoppmann’s EP-15 elevating prefeeder is designed to handle medium sized parts. With a heavy duty variable speed motor and standard bowl level sensor, it ensures proper product metering. Designed for floor level parts loading. Standard electrostatic epoxy powder coat finish. Inlets: (1) 3 ft. 4 in. L x 2 ft. 2 in. W infeed. Outlets: (1) 11 in. L x 7 ½ in. W discharge. Overall dimensions: 8 ft. L x 3 ft. 6 ½ in. W x 9 ft. 3 in. H. (ACN52)

SOLD

Click here for Additional Information (846.7 KB)
Click here for more information (425.6 KB)

Click On Picture

Stainless Steel Incline Conveyor with Hopper

SOLD Stainless Steel Incline Conveyor with Hopper
Mfg: Not Specified Model:
Stock No: OI121. Serial No:
Stainless Steel Incline Conveyor with Hopper. Conveyor dimensions: 7 ft. 6 in. L x 8-1/2 in. W. Cleat height: 1-1/2 in. Distance between cleats: 1 ft. Maximum hopper dimensions: 2 ft. 2 in. W x 1 ft. 8 in. H (back) . Minimum Hopper: 1 ft. 5 in. W x 10-1/2 in. H (front). Baldor motor, 1 hp. Conveyor infeed height: 3 ft., conveyor exit height: 9 ft. Overall dimensions: 7 ft. 2 in. L x 3 ft. W x 9 ft. H.

SOLD

Click here for more information (185.4 KB)

Click On Picture

FECO Full Can Conveyor and Riser

SOLD FECO Full Can Conveyor and Riser
Mfg: FECO Model:
Stock No: SNPM036.a Serial No: 61531-04
FECO Full Can Conveyor and Riser. S/N 61531-04.

SOLD

Click On Picture

Transfer Inclined Cleated Conveyor

SOLD Transfer Inclined Cleated Conveyor
Mfg: Not Specified Model:
Stock No: DPFI209.1a Serial No:
Transfer Inclined Cleated Conveyor. Stainless steel construction. Maximum aperture/clearance above belt: 16 in. W x 6-1/2 in. H. Sew Eurodrive Motor, 1 hp, 1,700 rpm, 230/460 V, 3.70/1.85 amps, 60 H z, 3 phase. Sew Eurodrive, 19.13 ratio, 89 rpm (final), 585 lb-in torque. Overall dimensions: 12 ft. L x 30-1/2 in. W x 8 ft. H.

SOLD

Click here for more information (230.2 KB)

Click On Picture

Inclined Transfer Conveyor - 12 in. wide

SOLD Inclined Transfer Conveyor - 12 in. wide
Mfg: Not Specified Model:
Stock No: DPFI210.1 Serial No:
Inclined Transfer Conveyor. Stainless steel construction. Cleated conveyor belt. Maximum aperture /clearance above belt: 12 in. W x 5-1/2 in. H. Baldor Washdown Duty motor, 1,725 rpm, 230/460 V, 2.2/1.1 amps, 60 Hz, 3 phase. Boston 700 Series motor drive. Monnekes heavy duty disconnect switch. Infeed: 1 ft. L x 5-1/2 in. W. Overall dimensions: 14 ft. 3 in. L x 2 ft. 3 in. W x 8 ft. 8 in. H.

SOLD

Click here for more information (205.0 KB)

Click On Picture

Hytrol Company Inc. Conveyor

SOLD Hytrol Company Inc. Conveyor
Mfg: Hytrol Model: TA
Stock No: OI47 Serial No: 349878
Hytrol Company Inc. Conveyor, Model TA, S/N 349878. Has a motor and gear box, conveyor operates on a velt. There are 3 pieces of conveyor (1) at 126 in. L, 16 in. W, (1) at 60 in. L, 16 in. W, (1) at 84 in. L, 16 in. W. It also has 4 legs; the legs start at 1.34 in. by 16 in. W, (1) at 46 in. H, 16 in. W, (1) at 58 in. L, 16 in. W, 92 in. H, 16 in. W

SOLD

Click here for more information (502.3 KB)

Click On Picture

Incline Belt Conveyor, Stainless Steel

SOLD Incline Belt Conveyor, Stainless Steel
Mfg: Not Specified Model:
Stock No: 1R-334.5 Serial No:
Stainless Steel Inclined Conveyor. Maximum aperture/clearance above belt: 1 ft. W x 4 in. H. U.S. Electric Syncrogear Motor, 3/4 hp, 1750 rpm, 208-230/460 V, 2.8/1.4 FLA. Speed Reducer, 31 ratio, 56.45 rpm (final). Conveyor infeed height: 2 ft. 5 in. Conveyor exit height: 5 ft. 9-1/2 in. Overall dimensions: 17 ft. L x 1 ft. 9 in. W x 7 ft. 3 in. H.

SOLD

Click here for more information (324.7 KB)

Click On Picture

Stainless Steel Incline Conveyor

SOLD Stainless Steel Incline Conveyor
Mfg: Not Specified Model:
Stock No: 1R-369.1 Serial No:
Stainless Steel Incline Conveyor. Belt width: 2 ft. Maximum aperture/clearance: 1 ft. 8 in. W x 3 in. H. Distance between cleats: 8 in. Hydraulic Drive. Mild steel frame. Conveyor infeed height: 1 ft. 3 in. Conveyor exit height: 7 ft. 6 in. H. Overall dimensions: 11 ft. 8 in. L x 3 ft. 4 in. W x 8 ft. 4 in. H.

SOLD

Click here for more information (277.1 KB)

Click On Picture

Stainless Steel Vertical Screw Auger Conveyor

SOLD Stainless Steel Vertical Screw Auger Conveyor
Mfg: Not Specified Model:
Stock No: BBCF162.8 Serial No:
Stainless Steel Vertical Screw Auger Conveyor. Screw dimensions: 8 in. dia. x 16 ft. L. Housing diameter: 9 in. Flight pitch: 8 in. Shaft diameter: 2 in. Reliance Electric Motor, 5 hp, 1160 rpm, 230/460 V, 15.6/7.8 amps, 60 Hz, 3 phase. Driver pulley diameter: 6 in. Driven pulley diameter: 19 in. Inlets: (1) 10 in. dia. Outlets: (1) 10 in. W x 10 in. H discharge. Overall dimensions: 20 ft. 3 in. L x 2 ft. 1 in. W x 3 ft. H.

SOLD

Click here for more information (688.7 KB)

Click On Picture

Elevated Conveyor, Stainless Steel

SOLD Elevated Conveyor, Stainless Steel
Mfg: Not Specified Model:
Stock No: 203 Serial No:
Elevated Conveyor. Stainless steel. Belt: 16 in. W. Dimensions: 188 in. L x 19 in. W x 51 in. H. (40 in. H at low end). Dodge Master XL speed reducer.

SOLD

Click here for more information (212.2 KB)

Click On Picture

Shop-Built Elevated Conveyor with Cleated Belt

SOLD Shop-Built Elevated Conveyor with Cleated Belt
Mfg: Not Specified Model:
Stock No: AARF14B.18 Serial No:
Shop-Built Elevated Conveyor with Cleated Belt. Belt width: 12 in. Maximum aperture/clearance above belt: 12 in. W x 6 in. H. Height at conveyor inlet: 18 in. Height at conveyor outlet: 65 in. Distance between cleats: 17-1/2 in. U.S. Gearmotor, 1/2 hp, 1800 rpm, 45 rpm (final), 220/440 V, 1.5/2.3 amps, 60 Hz, 3 phase. Overall dimensions: 9 ft. L x 24 in. W x 84 in. H.

SOLD

Click here for more information (117.3 KB)

Click On Picture

Incline Dewatering Conveyor

SOLD Incline Dewatering Conveyor
Mfg: Not Specified Model:
Stock No: 35.1R-128.3a Serial No:
Incline Dewatering Conveyor. Stainless steel frame. Maximum aperture: 15 ft. L x 20 in W. Top mounted 3-tube spray washer. Infeed/exit height: 24/75 in. Inlets: (1) 1-1/2 in. dia. PVC (washer). Outlets: (1) 1-1/2 in. dia. PVC (washer). Overall dimensions: 17 ft. 6 in. L x 45 in. W x 100 in. H.

SOLD

Click here for more information (202.5 KB)

Click On Picture

Stainless Steel Inclined Belt Conveyor

SOLD Stainless Steel Inclined Belt Conveyor
Mfg: Not Specified Model:
Stock No: MF-135.2a Serial No:
Stainless Steel Inclined Belt Conveyor. Maximum aperture: 7 in. W. Baldor Electric Motor, 1/4 hp, 1725 rpm, 115 V, 6.2 amps, 60 Hz, single phase. Boston Gear 300 Series Speed Reducer. Conveyor infeed height: 2 ft. 4-1/2 in. Conveyor exit height: 3 ft. 4-1/2 in. Overall dimensions: 12 ft. 9-1/2 in. L x 1 ft. 2 in. W x 3 ft. 8 in. H.

SOLD

Click here for more information (202.8 KB)

Click On Picture

SECO Simplimatic Engineering Company Incline Conveyor

SOLD SECO Simplimatic Engineering Company Incline Conveyor
Mfg: SECO Model:
Stock No: HDBA042G. Serial No:
SECO Simplimatic Engineering Company Incline Conveyor. Maximum size of belt handled: 12-1/2 in. W. Equipped with a 3-1/2 in. dia. x 12 in. L roller. Infeed height: 57 in. Exit height: 8-/2 in. Overall dimensions: 94 in. L x 17 in. W x 29-1/2 in. H. (61 in. H on incline position)

SOLD

Click here for more information (215.0 KB)

Click On Picture

Stainless Steel Incline Cleat Conveyor

SOLD Stainless Steel Incline Cleat Conveyor
Mfg: Not Specified Model:
Stock No: DENF005. Serial No:
Stainless Steel Incline Cleat Conveyor. Belt width: 17 in. Cleat height: 1-1/4 in. (4) Casters for easy positioning. Overall dimensions: 10 ft. L x 25-1/2 in. W x 68 in. H.

SOLD

Click here for more information (195.4 KB)

Click On Picture

Stainless Steel Feed Conveyor

SOLD Stainless Steel Feed Conveyor
Mfg: Not Specified Model:
Stock No: SSLP852.3a Serial No:
Stainless Steel Feed Conveyor. Corro-Duty motor, 1/2 hp, 1745 rpm, 208-230/460 V, 1.9-2.0/1.0 amps, 60 Hz, 3 phase. Motor drive, 38.44 ratio, 45.39 output rpm. Conveyor dimensions: 120 in. L x 12 in. W. Overall dimensions: 11 ft. 9 in. L x 22 in. W x 34 in. H.

SOLD

Click here for more information (212.1 KB)

Click On Picture

Elevated Conveyor, Stainless Steel

SOLD Elevated Conveyor, Stainless Steel
Mfg: Not Specified Model:
Stock No: 15.216 Serial No:
Elevated Conveyor. Stainless steel. Dimensions: 7 ft L x 12 in. W x 43 in. H.

SOLD

Click On Picture

Incline Conveyor

SOLD Incline Conveyor
Mfg: Not Specified Model:
Stock No: CA25000 Serial No:
Incline Conveyor. Infeed height 23 in. Outfeed height 43 in. Conveyor width 32 in. Conveyor length of 7 ft. 3 in.

SOLD

Click On Picture

Minnesota Automation Vertical Lifts

SOLD Minnesota Automation Vertical Lifts
Mfg: Minnesota Automation Model: LEAK DET
Stock No: GM-601.2 Serial No: 05891 and 05931.
(2) Minnesota Automation Vertical Lifts. Model: LEAK DET. S/N's: 05891 and 05931. Product width (adjustable): 1-1/4 in. W. Air supply: 80 psi-scfm. Power supply: 480 V, 5 amps, 60 Cycles, 3 phase. Baldor Motor, 1725 rpm, 208-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase. (2) Drives. Infeed height: 32-1/2 in. Exit height: 21 in. Overall dimensions: 11 ft. 3 in L x 36 in. W x 87 in. H.

SOLD

Click here for more information (340.8 KB)

Click On Picture

1992 Minnesota Automation Vertical Lifts

SOLD 1992 Minnesota Automation Vertical Lifts
Mfg: Minnesota Automation Model: LEAK DET
Stock No: GM-611.8 Serial No: 10085, 10091, 10092, and 10093
(4) 1992 Minnesota Automation Vertical Lifts. Model: LEAK DET. S/N's: 10085, 10091, 10092, and 10093. Product width (adjustable): 1 in. Air supply: 80 psi-scfm. Power supply: 80 V, 4.5 amps, 60 Cycles, 3 phase. Baldor Motor, 1740 rpm, 208-230/460 V, 6-5.6/2.6 amps, 60 Hz, 3 phase. (2) Drives. Infeed height: 33 in. Exit height: 20 in. Overall dimensions: 11 ft. 3 in L x 35-1/2 in. W x 100 in. H.

SOLD

Click On Picture

90 Degree Intralox Conveyor with Incline  - 19 in. wide

SOLD 90 Degree Intralox Conveyor with Incline - 19 in. wide
Mfg: Not Specified Model:
Stock No: RBFM257B Serial No:
90 Degree Intralox Conveyor with Incline - 19 in. wide. Belt dimensions: 11 ft. L x 1 ft. 7 in. W. Infeed height: 4 ft. 2 in. Exit height: 3 ft. 6 in. Motor and drive shown have been removed and are not included. Overall dimensions: 11 ft. 3 in. L x 2 ft. 3 in. W x 4 ft. 2 in. H.

SOLD

Click here for more information (302.9 KB)

Click On Picture

Portable Incline Conveyor System- 15 Ft.

SOLD Portable Incline Conveyor System- 15 Ft.
Mfg: Not Specified Model:
Stock No: HDPH623.3a Serial No:
Portable Incline Conveyor System- 15 ft. Stainless steel. Mesh belt. 1 in. Cleats, 12 in. spacing between the cleats, Product drop point: 86 in. H. Conveyor belt: 12 in. W. Leeson Direct Current Permanent Magnet Motor, Model C42017FKIA, S/N 098000-00, 1/2 hp, 1,750 rpm, 90 V, 18.0 torque. Included controller for the motor. Overall dimensions: 163 in. L x 31 in. W x 93 in. H.

SOLD

Click here for more information (378.2 KB)

Click On Picture

1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator

SOLD 1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator
Mfg: Universal International, Inc. / Universal Industries Model: U2-800
Stock No: MRSP126 Serial No: 74060-4
1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator. Model: U2-800. Capacity of free flowing material @ 85% Bucket fill: 800 cubic ft. / h. Bucket spacing: 5 in. Bucket size: 7 in. L x 4 ½ in. W x 4 in. Deep. Infeed: 8 in². Discharge: 10 in². Belt speed: 168 FPM. Belt width: 8 in. Baldor electric motor, 1 hp, 1725 rpm, 208-230/460 V, 5.8 – 5/2.5 amps, 60 Hz, 3 phase. Dodge torque arm speed reducer, ratio: 15.35. Final rpm: 112. U2 series bucket elevators applications include hot, abrasive, heavy, corrosive, hygroscopic and wet materials, and also features an exclusive “easy dump” design. (2) access 10 in. W x 6 in. H. access door. Inlet: (1) 8 in. W x 8 in. H port, (1) 4 in. dia. side access port. Outlets: (1) 10 in. L x 10 in. W port. Overall dimensions: 5 ft. 1 in. L x 2 ft. 8 in. W x 18 ft. 6 in. H.(BH)(ACN92).

SOLD

Click here for more information (304.4 KB)

Click On Picture

Stainless Steel Incline Conveyor

SOLD Stainless Steel Incline Conveyor
Mfg: Not Specified Model:
Stock No: OI122. Serial No:
Stainless Steel Incline Conveyor. Maximum aperture/clearance above belt: 13-1/2 in. W x 4 in. H. Height at conveyor inlet: 27 in. Height at conveyor outlet: 71 in. Spray bridge. Baldor Industrial Motor, 1-1/2 hp, 1725 rpm, 208-230/460 V, 5.3-5/2.5 amps, 60 Hz, 3 phase. Boston Motor Drive, 43 ratio, 40 rpm (final). Outlets: (1) 18 in. L x 17 in. W discharge chute. On casters. Overall dimensions: 12 ft. 2 in. L x 3 ft. W x ft. 4 in. H.

SOLD

Click here for more information (190.0 KB)

Click On Picture

1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator

SOLD 1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator
Mfg: Universal International, Inc. / Universal Industries Model: U2-800
Stock No: MRSP127 Serial No: 74060-1
1992 Universal International, Inc. / Universal Industries Vertical Bucket Elevator. Model: U2-800. Capacity of free flowing material @ 85% Bucket fill: 800 cubic ft. / h. Bucket spacing: 5 in. Bucket size: 7 in. L x 4 ½ in. W x 4 in. Deep. Infeed: 8 in². Discharge: 10 in². Belt width: 8 in. Belt speed: 168 FPM. Baldor Electric motor, 1 hp, 1725 rpm, 208-230/460 V, 3.6-3.4/1.7 amps, 60 Hz, 3 phase. Dodge torque arm speed reducer, ratio: 15.35. Final rpm: 112. U2 series bucket elevators applications include hot, abrasive, heavy, corrosive, hygroscopic and wet materials, and also features an exclusive “easy dump” design. (1) Access 10 in W x 6 in. H access door. Inlet: (1) 8 in. W x 8 in. H port, (1) 4 in. dia. side access port. Outlets: (2) 8 in. dia. port. Overall dimensions: 5 ft. 2 ½ in. L x 2 ft. 9 in. W x 18 ft. 6 in. H.(H16)(ACN92).

SOLD

Click here for more information (235.7 KB)

Click On Picture

Stainless Steel Incline Z-Conveyor - 24 in. wide

SOLD Stainless Steel Incline Z-Conveyor - 24 in. wide
Mfg: Not Specified Model:
Stock No: BDPC195.4 Serial No:
Stainless Steel Incline Z-Conveyor. 2 ft. W x 15 ft. L flighted intralox belt, 2 in. H flights, various spacing, 7 ft. discharge, drip pan, hydraulic drive

SOLD

Click here for more information (105.0 KB)

Click On Picture

Stainless Steel Z-Conveyor

SOLD Stainless Steel Z-Conveyor
Mfg: Not Specified Model:
Stock No: BDPC129.3 Serial No:
Stainless Steel Z-Conveyor. 16 in. W x 15 ft. L overall. No belt, 7 ft. L flat, 5 ft. incline, 3 ft. flat, 8 in. H trough, drip pan, stainless steel chute, hydraulic drive.

SOLD

Click here for more information (120.7 KB)

Click On Picture

Stainless Steel Z-Conveyor

SOLD Stainless Steel Z-Conveyor
Mfg: Not Specified Model:
Stock No: BDPC063.4 Serial No:
Stainless Steel Z-Conveyor. 16 in. W x 15 ft. L overall. No belt, 7 ft. L flat, 5 ft. incline, 3 ft. flat, 8 in. H walls, drip pan, stainless steel chute, hydraulic drive.

SOLD

Click here for more information (123.4 KB)

Click On Picture

Adjustable Height Conveyor

SOLD Adjustable Height Conveyor
Mfg: Not Specified Model:
Stock No: NOI1118 Serial No:
Adjustable Height Conveyor. Eurodrive motor: .37 k.w., 1700 rpm, 266/460 v, 1.85/1.07 a, 60 Hz, 3 phase. Max conveyor exit height: 3 ft. 4 in. Lowest conveyor exit height: 1 ft. 5 in. Conveyor dimensions: 16 ft. L x 6-1/2 in. W. Overall dimensions: 8 ft. 2 in. L x 1 ft. 9 in. W x 4 ft. 11 in. H.

SOLD

Click here for more information (298.1 KB)

Click On Picture

Stainless Steel Incline Ice Auger with Drain Chute

SOLD Stainless Steel Incline Ice Auger with Drain Chute
Mfg: Not Specified Model:
Stock No: KWBF136.1 Serial No:
Stainless Steel Incline Ice Auger with Drain Chute. Auger dimensions: 9 in. dia. x 9 ft. 9 in. L. Pitch: 9 in. Auger inlet: (1) 2 ft. 7 in. L x 10 in. W. Auger outlet: (1) 10 in. L x 10 in. W. Hopper inside dimensions: 8 ft. L x 4 ft. W. x 2 ft. H. Hopper infeed height: 3 ft. 4 in. Chute infeed dimensions: 9 ft. 3 in. L x 2 ft. 7 in. W x 2 ft. H. Chute infeed height: 3 ft. 4 in. Chute exit height: 2 ft. Overall dimensions: 17 ft. 9 in. L x 10 ft. 9 in. W x 9 ft. H.

SOLD

Click here for more information (303.9 KB)

Click On Picture

Vanmark Corp Vertical Hydrolift Destoner with Auto Rock Remover

SOLD Vanmark Corp Vertical Hydrolift Destoner with Auto Rock Remover
Mfg: Vanmark Model:
Stock No: DWKN03 Serial No: M22-042685
Vanmark Corporation Vertical Hydrolift Destoner / Screw Auger Conveyor with Automatic Rock removal. S/N: M22-042685. Infeed hopper dimensions: 4 ft. L x 1 ft. 7 in. W. Screw auger dimensions: 1 ft. 3 in. dia. x 10 ft. 5 in. H. Based on the chute dimensions, this appears to be a model 2000. Reliance Electric Motor, 5 hp, 1750 rpm, 460 V, 6.6 amps, 60 Hz, 3 phase. Driver pulley diameter: 3 in. Driven pulley diameter: 1 ft. 7 in. Pulley ratio: 0.15. Final speed: 276 rpm. Automatic rock remover paddle dimensions: 3 ft. 9 in. dia. x 6 in. W. Reliance Electric Motor with Speed Reducer, 1/2 hp, 1725 rpm, 208-230/460 V, 1.7/.85 amps, 60 Hz, 3 phase. Inlets: (1) 1 ft. 4 in. W x 1 ft. 2 in. H. product infeed. Outlets: (1) 2 in. dia. FNPT rock remover port, (2) 2-1/2 in. dia. NPT overflow ports, (1) 4 in. dia. drain port, (1) 1 ft. 3 in. L x 1 ft. 2 in. W product discharge. Overall dimensions: 5 ft. L x 5 ft. W x 10 ft. 9 in. H. (GI).

SOLD

Click here for more information (749.8 KB)
Click here for spec sheet (347.7 KB)

Click On Picture

ACHS, Inc. Portable Incline Belt Conveyor - 13 in. Wide

SOLD ACHS, Inc. Portable Incline Belt Conveyor - 13 in. Wide
Mfg: American Container Handling Systems, Inc. Model:
Stock No: KMCR80.11 Serial No:
American Container Handling Systems, Inc. (ACHS) Incline Belt Conveyor. Belt width: 13 in. Cleat height: 2 in. Feet per minute: 94. Discharge height: 12 feet. Distance from floor to bottom of the discharge chute: 125.5 inches. Stainless steel frame with castor wheels. Product inlet hopper. Unit will lower to go through doorways and make it easier to truck. Dura-Drive Plus brand motor drive 1.36/2 HP, 3330 RPM, 575V, 1.7 Amps, 60 Hz, type 5.3, S/N: 30974-1. Allen Bradley VFD speed controller. Overall dimensions: 16 ft. L x 5 ft. 6 in. W x 12 ft. 3 in. H.

SOLD

Click here for more information (184.9 KB)

Click On Picture

ACHS, Inc. Portable Incline Belt Conveyor - 13 in. Wide

SOLD ACHS, Inc. Portable Incline Belt Conveyor - 13 in. Wide
Mfg: American Container Handling Systems, Inc. Model:
Stock No: KMCR81.7 Serial No:
American Container Handling Systems, Inc. (ACHS) Incline Belt Conveyor. Belt width: 13 in. Cleat height: 2 in. Feet per minute: 94. Discharge height: 9 ft. 9 in. Distance from floor to bottom of the discharge chute: 99 inches. Stainless steel frame with castor wheels. Product inlet hopper. Unit will lower to go through doorways and make it easier to truck. Dura-Drive Plus brand motor drive 1.36/2 HP, 3330 RPM, 575V, 1.7 Amps, 60 Hz, type 5.3, S/N: 30974-1. Allen Bradley VFD speed controller. Overall dimensions: 12 ft. L x 5 ft. 3 in. W x 10 ft. H.

SOLD

Click here for more information (182.1 KB)

Click On Picture

Incline Conveyor with Cleated Belt

SOLD Incline Conveyor with Cleated Belt
Mfg: Not Specified Model:
Stock No: EKTF9504.6 Serial No:
Incline Conveyor with Cleated Belt. Height at conveyor inlet: 16 in. Height at conveyor outlet: 57 in. Maximum aperture/clearance above belt: 37-1/2 in. W x 5 in. H. Space between cleats: 37-1/2 in. L x 11-3/4 in. W. Feed container capacity: 75 cu. ft. Inlets: 1/2 in. dia. air or water, (1) 1-1/2 in. "S" line fitting (flushing). Outlet: (1) 2 in. dia. "S" line fitting (drain pan). Overall dimensions: 22 ft. 4 in. L x 47 in. W x 61 in. H.

SOLD

Click here for more information (225.3 KB)

Click Here if you don't see what you're looking for in our online catalog.


 Genemco : Offers Used Elevated Incline Belt Conveyors, Hoppmann Stainless Steel Elevating Prefeeder