Used Ammonia Evaporative Condenser, Evaporative Condensers, Baltimore Aircoil Evaporative Consenser, Evapco Evaporative Condenser, Recold Evaporative Condenser 
 Genemco Sells Used Evaporative Condensers, Industrial Ammonia Evaporative Condensers - Baltimore Aircoil Company, BAC, Evapco, Recold  

Click On Picture

Unused 2007 Evapco Evaporative Condenser Towers  2569 Tons

Unused 2007 Evapco Evaporative Condenser Towers 2569 Tons
Mfg: Evapco Model: eco-ATC-2569-1g
Stock No: MGEK287D Serial No: 7-315810, 7-315811
(2) Unused 2007 Evapco Evaporative Condenser Tower 2569 Tons. This unit if used as a refrigerant condenser would be model eco-ATC-2569-1g (nameplate model number: ATW 672-5M). Serial Numbers: 7-315810 and 7-315811 . Nominal tonnage rating with R-507: 2569 TR. Rating with R-717 Ammonia: 1822 TR with standard conditions (96.3F condensing, 20F suction, 78F wetbulb). Coil test pressure 400 PSIG. (4) coil/fan sections. (4) 30 hp fan motors. (2) basins, galvanized. (4) 5 hp pumps, 1800 gpm. Shipping weight: 106,640 lbs (heaviest section: 23,550 lbs). Overall dimensions: 11 ft. 10 in. W x 28 ft. 2 in. L x 16 ft. 11 in H. Two complete units available (ACN4800).

Click here to see a video of the equipment

Click here for more information (799.5 KB)

Click On Picture

Unused 2007 Evapco Evaporative Condenser Tower  1285 Tons

Unused 2007 Evapco Evaporative Condenser Tower 1285 Tons
Mfg: Evapco Model: eco-ATC-1285-1g
Stock No: MGEK287C Serial No: 7-315810
Unused 2007 Evapco Evaporative Condenser Tower 1285 Tons. This unit if used as a refrigerant condenser would be model eco-ATC-1285-1g (nameplate model number: ATW 672-5M). Serial No: 7-315810. Nominal tonnage rating with R-507: 1,285 TR. Rating with R-717 Ammonia: 912 TR with standard conditions (96.3F condensing, 20F suction, 78F wetbulb). Coil test pressure 400 PSIG. (2) coil/fan sections. (2) 30 hp fan motors. (1) common basin, galvanized. (2) 5 hp pumps, 1800 gpm. Shipping weight: 53,220 lbs (heaviest section: 23,550 lbs). Overall dimensions: 11 ft. 10 in. W x 28 ft. 2 in. L x 16 ft. 11 in H.(ACN2400).

Click here to see a video of the equipment

Click here for more information (799.6 KB)

Click On Picture

1997 Evapco Evaporative Condenser  1770 Tons

1997 Evapco Evaporative Condenser 1770 Tons
Mfg: Evapco Model: PMCB 1770
Stock No: DBDD01 Serial No: 974741M
1997 Evapco Evaporative Condenser. Model: PMCB 1770. Nominal capacity: 1770 Tons using R-22 at 105F condensing temperature, 40F suction temperature, and 78F wet bulb temperature. R-717 (ammonia) capacity rating: 1255 tons at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. (2) 30 hp and (2) 15 hp fan motors at 460V, 60 Hz, 3 phase. (2) 7.5 pump motors at 460V, 60 Hz, 3 phase. (6) fans. (2) Hansen Technologies hand valves, (2) Henry hand valves, (4) Hansen Technologies Pressure relief valves Cat. No. H5602. (2) manways, 20 in. diameter. Inlet / outlets: (2) 2 in. threaded, (1) 3 in threaded, (1) 3-1/2 in. threaded, (2) 6 in., (8) 4 in. Overall dimensions: 36 ft. 3-1/2 in. L x 11 ft. 11-1/4 in. W x 15 ft. 7-3/4 in. H.(H).(ACN2066).

Click here to see a video of the equipment

Click here for more details and drawings (222.9 KB)
Click here for more information (1,031.7 KB)

Click On Picture

1994 Evapco PMCA Series Evaporative Condenser  1250 Tons

1994 Evapco PMCA Series Evaporative Condenser 1250 Tons
Mfg: Evapco Model: PMCA-1250
Stock No: ASCA010.157a Serial No: 940983
1994 Evapco Evaporative Condenser. Model: PMCA-1250. Nominal rated capacity: 1250 tons using R-22 at 105F condensing, 40F suction, and 78F wet bulb temperatures or 887 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. (2) pumps with (2) motors: 7-1/2 HP, 230/460V, 60 Hz, 3 phase. (6) fans with (4) fan motors: (2) at 20 HP, and (2) at 10 HP, 230/460V, 60 Hz, 3 phase, CFM: 219,000, water flow 2,060 gpm. Overall dimensions: 30 ft. 1 in. L x 10 ft. W x 13 ft. 3 in. H.

Click here to see a video of the equipment

Click here for more information (576.9 KB)
Click here for drawing (2,937.0 KB)

Click On Picture

BAC VC2-982 Evaporative Condenser - 982 Tons

BAC VC2-982 Evaporative Condenser - 982 Tons
Mfg: BAC Model: VC2-982
Stock No: RPCA1369J.120 Serial No: U2295001MAD
BAC VC2-982 Evaporative Condenser. 982 nominal tons using R-22 at a 105F condensing temperature, a 40F suction temperature, and a 78F wet-bulb temperature. 696 tons using R-717(ammonia) at a 96.3F condensing temperature, a 20F suction temperature, and a 78F wet-bulb temperature. (4) fans. (2) 5 hp pumps. Belt: 2B154. Shipping Weight: 38,940 lbs (14,400 lbs heaviest). Overall Dimensions: 23 ft. 8-1/2 in. L x 11 ft. 10 in. W x 15 ft. 2 in. H.

Click here for product brochure (6,303.1 KB)
Click here for more information (789.8 KB)

Click On Picture

BAC VC2-982 Evaporative Condenser - 982 Tons

BAC VC2-982 Evaporative Condenser - 982 Tons
Mfg: BAC Model: VC2-982
Stock No: RPCA1369K.120 Serial No: U2295002MAD
BAC VC2-982 Evaporative Condenser. 982 nominal tons using R-22 at a 105F condensing temperature, a 40F suction temperature, and a 78F wet-bulb temperature. 696 tons using R-717(ammonia) at a 96.3F condensing temperature, a 20F suction temperature, and a 78F wet-bulb temperature. (4) fans. (2) 5 hp pumps. Belt: 2B154. Shipping Weight: 38,940 lbs (14,400 lbs heaviest). Overall Dimensions: 23 ft. 8-1/2 in. L x 11 ft. 10 in. W x 15 ft. 2 in. H.

Click here for more information (721.1 KB)
Click here for product brochure (6,303.1 KB)

Click On Picture

BAC VXMC-860-H Evaporative Condenser - 860 Tons

BAC VXMC-860-H Evaporative Condenser - 860 Tons
Mfg: BAC Model: VXMC-860-H
Stock No: RPCA1369L.50 Serial No: 8720046
BAC VXMC-860-H Evaporative Condenser. 860 nominal tons using R-22 at a 105F condensing temperature, a 40F suction temperature, and a 78F wet-bulb temperature. 610 tons using R-717(ammonia) at a 96.3F condensing temperature, a 20F suction temperature, and a 78F wet-bulb temperature. (6) fans. (2) 5 hp pumps. Belt: 6-B144. Shipping Weight: 44,740 lbs (15,240 lbs heaviest). Overall Dimensions: 35 ft. 9-1/4 in. L x 9 ft. 10-1/8 in. W x 13 ft. 1-7/8 in. H.

Click here for product brochure (6,303.1 KB)
Click here for more information (577.5 KB)

Click On Picture

BAC VXMC-860-H Evaporative Condenser - 860 Tons

BAC VXMC-860-H Evaporative Condenser - 860 Tons
Mfg: BAC Model: VXMC-860-H
Stock No: RPCA1369M.45 Serial No:
BAC VXMC-860-H Evaporative Condenser. 860 nominal tons using R-22 at a 105F condensing temperature, a 40F suction temperature, and a 78F wet-bulb temperature. 610 tons using R-717(ammonia) at a 96.3F condensing temperature, a 20F suction temperature, and a 78F wet-bulb temperature. (6) fans. (2) 5 hp pumps. Belt: 6-B144. Shipping Weight: 44,740 lbs (15,240 lbs heaviest). Overall Dimensions: 35 ft. 9-1/4 in. L x 9 ft. 10-1/8 in. W x 13 ft. 1-7/8 in. H.

Click here for product brochure (6,303.1 KB)
Click here for more information (635.5 KB)

Click On Picture

BAC VXMC-860-H Evaporative Condenser - 860 Tons

BAC VXMC-860-H Evaporative Condenser - 860 Tons
Mfg: BAC Model: VXMC-860-H
Stock No: RPCA1369N.50 Serial No:
BAC VXMC-860-H Evaporative Condenser. 860 nominal tons using R-22 at a 105F condensing temperature, a 40F suction temperature, and a 78F wet-bulb temperature. 610 tons using R-717(ammonia) at a 96.3F condensing temperature, a 20F suction temperature, and a 78F wet-bulb temperature. (6) fans. (2) 5 hp pumps. Belt: 6-B144. Shipping Weight: 44,740 lbs (15,240 lbs heaviest). Overall Dimensions: 35 ft. 9-1/4 in. L x 9 ft. 10-1/8 in. W x 13 ft. 1-7/8 in. H.

Click here for product brochure (6,303.1 KB)
Click here for more information (955.6 KB)

Click On Picture

Imeco XLP Series Evaporative Condenser  805 Tons

Imeco XLP Series Evaporative Condenser 805 Tons
Mfg: Imeco Model: XLP XL 805
Stock No: AANF547.22a Serial No: 1446-1 LH
Imeco Evaporative Condenser. Model: XLP-XL 805. Rated capacities: 805 tons with R-22 at 105F condensing, 40F suction and 78F wet bulb and 580 tons using R-717 at 96.3F condensing, 20F suction, and 78F wet bulb. Maximum pressure: 250 psi. (3) 62 in. dia. fans. Electric Fan Motor, 25 hp, 1760 rpm, 230/460 V, 62/31 amps, 60 Hz, 3 phase. Fan Motor: 15 hp, 460 V, 18.3 FLA. (1) Manway, dimensions: 1 ft. 10 in. dia. Approximate dimensions: 25 ft. W x 12 ft. L x 15 ft H.

Click here to see a video of the equipment

Click here for drawing (129.5 KB)
Click here for more information (475.1 KB)

Click On Picture

1999 Evapco PMCB Evaporative Condenser  775 Tons

1999 Evapco PMCB Evaporative Condenser 775 Tons
Mfg: Evapco Model: PMCB-775
Stock No: BBCP01 Serial No: 992592-3M
Evapco Evaporative Condenser / Closed Circuit Fluid Cooler. Model: PMCB-775. Serial: 992592-3M. Evapco, Inc. Taneytown, MD USA. Belt: 2BX-128. Coil test pressure: 400 psig. Nominal ratings: 775 TR (R-22 freon), 550 TR (R-717 ammonia) using standard conditions. Can also be used with water/glycol as a closed loop fluid cooler. Fan motors: 15 HP, 30 HP. Spray pump: 7.5 HP / 1,030 GPM. Refrigerant ports: 4 in. diameter. Shipping weight: 29,930 lbs (21,870 heaviest section). Overall dimensions: 20 ft. 2 in. L x 9 ft. 10 in. W x 14 ft. 8 in. H. (ACN950)

Click here for more information (207.3 KB)
Click here for drawing (763.0 KB)

Click On Picture

APV/Crepaco (Evapco) Ammonia Evaporative Condenser Tower - 455 tons

APV/Crepaco (Evapco) Ammonia Evaporative Condenser Tower - 455 tons
Mfg: Evapco Model: PMCB-455
Stock No: MDOF245.110 Serial No: 953317M
APV/Crepaco (Evapco) Ammonia Evaporative Condenser Tower. Model: PMCB-455. S/N: 953317M. Nominal rating with R-22: 455 tons refrigeration. Originally setup for ammonia: 323 TR with 96.3F condensing, 20F suction, and 78F WB. Fan motor: 20 HP, 230/460V, 48/4 amps, 60 Hz, 3-phase, TEFC. Circulating Pump: 5 HP, 208-230/460V, 15-13.6/6.8 amps, 60 Hz, 3-phase, TE. Year: 1995. Refrigerant ports: 4 in. dia. Approximate shipping weight: 17,360 lbs. Heaviest section weight: 12,940 lbs. Approximate overall dimensions: 9 ft. 11.75 in. W x 13 ft. 5 in. L x 13 ft. 11.75 in. H.

Click here to see a video of the equipment

Click here for dimensional drawing (38.3 KB)
Click here for more information (275.3 KB)

Click On Picture

Imeco XLP Evaporative Condenser - 430 tons

Imeco XLP Evaporative Condenser - 430 tons
Mfg: Imeco Model: XLP-430
Stock No: LKBA400 Serial No: 41661
Imeco Evaporative Condenser Tower. Model: XLP-430. S/N: 4166-1. Year: 1988. Nominal R-22 refrigerant rating: 430 TR (tons refrigeration). Typically used as an evaporative condenser for ammonia (R-717 / NH4) or freon / halocarbon refrigerants. Can also be used with water/glycol as a closed-loop fluid cooler. Manufactured by Imeco, Inc. Polo, IL USA. (2) Centrifugal recirculation pumps: Scot MotorPump model 56, spec 3091 K160, code G8, SO 12597. Pump motor: Marathon Electric 1.5 HP, 208-230/460V, 1735 RPM, 60 Hz, 3-phase (also rated for 50 Hz). (4) Fans with (2) fan motors: MagneTek Century Electric 5HP, 208-230/460V, 1745 RPM, 60 Hz, 3-phase. Overall dimensions: 271 in. L x 90 in. W x 171 in. H.



Click here to see a video of the equipment

Click here for more information (447.3 KB)
Click here for drawing (68.1 KB)

Click On Picture

BAC Evaporative Condenser - 357 Tons

BAC Evaporative Condenser - 357 Tons
Mfg: BAC Model: C1462N
Stock No: KMPN01 Serial No: 87100575
BAC Evaporative Condenser. Model: C1462N. S/N: 87100575. Nominal capacity: 357 tons using R-22 at 105F condensing, 40F suction and 78F wet bulb temperatures or 253 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Overall dimensions: 18 ft. 6 in. L x 7 ft. 11 in. W x 12 ft. 11 in. H.(ACN580-87).

Click here to see a video of the equipment

Click here for more information (463.6 KB)

Click On Picture

Evapco PMC-340 Evaporative Condenser - 340 tons

Evapco PMC-340 Evaporative Condenser - 340 tons
Mfg: Evapco Model: PMC-340
Stock No: IME5007.30 Serial No: 845171
Evapco PMC-340 Evaporative Condenser. Model: PMC-340. S/N: 845171. Nominal capacity: 340 tons. Estimated capacity with R-717: 250 tons. Baldor Fan Motor: 15 HP, 230/460 Volts, 39.2/19 Amps, 1760 RPM. *Note: unit does not include water circulation pump(s). Year: 1984. Coil section height: 5 ft. Fan section height: 8 ft. 6 in. Overall dimensions: 9 ft. 6 in. W x 12 ft. 6 in. L x 13 ft. 6 in. H.

Click here for more information (321.0 KB)

Click On Picture

Evapco PMC-340 Evaporative Condenser - 340 tons

Evapco PMC-340 Evaporative Condenser - 340 tons
Mfg: Evapco Model: PMC-340
Stock No: IME5008.30 Serial No: 834624
Evapco PMC-340 Evaporative Condenser. Model: PMC-340. S/N: 834624. Nominal capacity: 340 tons. Estimated capacity with R-717: 250 tons. Baldor Fan Motor: 15 HP, 230/460 Volts, 39.2/19 Amps, 1760 RPM. *Note: unit does not include water circulation pump(s). Year: 1983. Coil section height: 5 ft. Fan section height: 8 ft. 6 in. Overall dimensions: 9 ft. 6 in. W x 12 ft. 6 in. L x 13 ft. 6 in. H.

Click here for more information (286.3 KB)

Click On Picture

1999 Imeco Evaporative Condenser - 310 Tons

1999 Imeco Evaporative Condenser - 310 Tons
Mfg: Imeco Model: XLC-310
Stock No: DMNY001D Serial No: 23348-1 LH
1999 Imeco Evaporative Condenser - 310 Tons. Model: XLC-310. S/N 23348-1 LH. Date manufactured: 12/30/1999, Dixon, IL USA. Refrigerant R-717. Max pressure: 300 PSI. Nominal rating: 310 TR (R-22) / 219.80 TR (R-717). Previously used in a spiral freezer application. Ports were sealed after removal. Fan motor: 30 HP, 460V, 37 FLA. Water pump motor: MagneTek 3 HP, 1740 RPM, 230/460V 10.4/5.2A, 60 Hz, 3-phase. Shipping weight: 11,430 lbs (heaviest section: 9,255 lbs). Side fans removable to reduce shipping width to 83 in. Overall dimensions: 195 in. L x 125.5 in. W x 99.625 in. H.

Click here for more information (368.2 KB)

Click On Picture

BAC Series V Evaporative Condenser  232 tons

BAC Series V Evaporative Condenser 232 tons
Mfg: Baltimore Aircoil Company Model: C-2442-K
Stock No: SDFP153.17a Serial No: 88600679P
BAC Series V Evaporative Condenser. Model: C2442-K. Serial No: 88600679P. Base heat rejection: 3,410.4 MBH. Base evaporator tons: 232 TR (R-22) / 172 TR (R-717 ammonia). Multi-stage axial fan: 10 HP, 44,750 CFM. Spray pump motor: 3 HP, 385 GPM. *PDF manual available. Approximate shipping weight: 10,450 lbs (7,050 lbs. heaviest section). Length without fan housing/pump: 144 in. Overall dimensions: 209.75 in. L x 7 ft. 10.5 in. W x 142 in. H.

Click here for dimensional drawings (269.4 KB)
Click here for more information (223.4 KB)

Click On Picture

Vilter VLH Evaporative Condenser Tower - 100 tons

Vilter VLH Evaporative Condenser Tower - 100 tons
Mfg: Vilter Model: VLH100
Stock No: IME5045.5 Serial No: F28285
Vilter VLH Evaporative Condenser Tower. Model: VLH-100. S/N: F-28285. Nominal Rating 100 tons (R-22) / 73 tons NH4 Ammonia. (2) Centrifugal fans on common shaft, 7-1/2 HP motor, 4 in. inlet/outlets, 4 in. refrigerant ports. *Note: unit has been successfully leak checked at 100 PSI. Overall dimensions: 10 ft. L x 6 ft. 6 in. W x 8 ft. H.

Click here for more information (172.0 KB)
Click here to view leak test (122.5 KB)

Click On Picture

Evapco PMWA Closed Circuit Cooling Tower - 55 tons

Evapco PMWA Closed Circuit Cooling Tower - 55 tons
Mfg: Evapco Model: PMWA-43B2
Stock No: IME5042.8 Serial No: 894091
Evapco PMWA Closed Circuit Cooling Tower / Closed Loop Fluid Cooler. Model: PMWA-43B2. Serial: 894091. Factory coil test pressure: 350 PSIG. Evapco, Inc. Baltimore, MD USA. Nominal rating at 78F wet bulb is 55 tons. Overall dimensions: 9 ft. L x 6 ft. 3 in. W x 10 ft. 6 in. H.

Click here for more information (232.5 KB)

Click On Picture

Evapco ATC Evaporative Condenser  65 tons

Evapco ATC Evaporative Condenser 65 tons
Mfg: Evapco Model: ATC-65B
Stock No: IME5043.3 Serial No: W007164
Evapco West, Inc. Evaporative Condenser / Closed Circuit Fluid Cooler. Model ATC65B. S/N: W007164. Coil test pressure: 400 PSIG. Madera, CA USA. EvapCoat G-235 Hot Dip Galvanized Steel. Nominal tonnage rating: 65 TR (R-22 freon), 46 TR (R-717 ammonia) at standard conditions: 105F condensing, +40F suction, 78F WB. Evapco, Inc. This can also be used with water/glycol as a closed loop fluid cooler. MotorPump 15, 3x3-4.63, 0.75 HP 200-230/460V, 60 Hz, 3-phase. Baldor-Reliance Industrial Fan Motor: 5 HP, 208-230/460V, 16.3-15/7.5 amps, 1155 RPM, 60 Hz, 3-phase. *PDF manual available. Shipping weight: 2,970 lbs (heaviest section 2,520 lbs). Overall dimensions: 4 ft 3 in. W x 7 ft. 2.5 in. L x 9 ft. 1 in. high.

Click here for more information (475.0 KB)
Click here for drawing (156.0 KB)

Click On Picture

Imeco PF202 Evaporative Condenser

Imeco PF202 Evaporative Condenser
Mfg: Imeco Model: PF202
Stock No: BDPC287.5 Serial No: 5095-A1-RH
Imeco Condenser. Model: PF202. S/N: 5095-A1-RH. Overall Dimensions: 15 ft. 5 in. Long x 10 ft. 11 in. Wide x 15 ft 8 in. High (approximately).

Click here to see a video of the equipment

Click here for more information (126.8 KB)

Click On Picture

Imeco PF202 Evaporative Condenser

Imeco PF202 Evaporative Condenser
Mfg: Imeco Model: PF202
Stock No: BDPC288.5 Serial No: 5095-A2-LH
Imeco Condenser. Model: PF202. S/N: 5095-A2-LH. Overall Dimensions: 15 ft. 5 in. Long x 10 ft. 11 in. Wide x 15 ft 8 in. High (approximately)

Click here for more information (208.9 KB)

Click On Picture

Imeco PF232P Evaporative Condenser

Imeco PF232P Evaporative Condenser
Mfg: Imeco Model: PF232P
Stock No: BDPC289.5 Serial No: 5732-A-1
Imeco Condenser. Model: PF232P. S/N: 5732-A-1.

Click here to see a video of the equipment

Click here for more information (115.1 KB)

Click On Picture

Evapco Evaporative Condenser  35 Tons

Evapco Evaporative Condenser 35 Tons
Mfg: Evapco Model: LSC-35
Stock No: RPCN441B. Serial No: 813499 LH
Evapco Evaporative Condenser. Model: LSC-35. Nominal capacity: 35 tons using R-22 at 40F suction, 105F condensing and 78 wet bulb. Rated at 25 tons using R-717 at 20F suction, 96.3F condensing and 78F wet bulb. Coil maximum working pressure rated at 350 PSIG. Unit was used in a remote sump application and does not include a pump. *Note: this unit failed the initial pressure test, but may be repairable. Overall dimensions: 6 ft. 7 in. L x 4 ft. 11 in. W x 7 ft. 6 in. H. (ACN96-81).

Click here for more information (450.9 KB)
Click here for drawing (430.1 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser

Baltimore Aircoil Company Evaporative Condenser
Mfg: Baltimore Aircoil Company Model:
Stock No: pMHCR261.3 Serial No:
Baltimore Aircoil Company Evaporative Condenser. There is no tag to identify the model. It appears to be a model BAC300. Dimensions: 12ft. L x 10 ft. W. (IN-ID)

Click here for more information (216.5 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser Coil Section

Baltimore Aircoil Company Evaporative Condenser Coil Section
Mfg: Baltimore Aircoil Company Model:
Stock No: NOI9003 Serial No:
Baltimore Aircoil Company Evaporative Condenser Coil Section. Number of coils: 28. Number of rows: 16. Inlet: (2) 4 in. dia. Port, (1) 4 in. dia. MNPT port (water). Outlet: (2) 4 in. dia. port, (1) 1 in. dia. port. Overall dimensions: 18 ft. 9 in. L x 6 ft. 8 in. W x 4 ft. 10 in. H.

Click here for more information (444.0 KB)

Click On Picture

BAC RS Cooling Tower Water Treatment System

BAC RS Cooling Tower Water Treatment System
Mfg: Baltimore Aircoil Company Model: RS-335 C
Stock No: SDFP154.3 Serial No: 88400930
Baltimore Aircoil Company Cooling Tower Water Treatment System. Model: RS-335 C. Serial: 88400930. RS Remote Sump tanks offer simplified water treatment, freeze projection, facilitate dry operation, have easy maintenance, etc. for open and closed loop cooling towers as well as evaporative condenser systems. RS-335 specs: 257 gallon net volume, 4 in. suction port size, 470 lbs shipping weight, dimensions: 4.5 ft. L x 3 ft. 11 in. W x 4 ft. H. Also includes Advantage Controls MegaTron model: MGCPF2E-X2-H4 controller (tower conductivity control, pH control, F2 chemical feed timers, flow switch) with H4 internet phone modem communications. (6) PULSAfeeder brand PULSAtron Series A-Plus Metering Pumps.

Click here for BAC RS brochure (254.6 KB)
Click here for MegaTron spec sheet (527.3 KB)
Click here for PULSAfeeder spec sheet (821.8 KB)

Click On Picture

2003 Miller-Leaman Inc. Turbo-Disc Process Cooling Water Filtration System

2003 Miller-Leaman Inc. Turbo-Disc Process Cooling Water Filtration System
Mfg: Miller-Leaman, Inc. Model: ATD2(2)x3-130M-P135-A
Stock No: DNBA215 Serial No: TD-00154
2003 Miller-Leaman Inc. Turbo-Disc Process Cooling Water Filtration System. Model: ATD2(2)x3-130M-P135-A. Turbo-Disc filter systems are designed for the filtration of water for cooling towers and chilled water systems and require a supply of compressed air for operation. Rated capacity: 135 gpm @ 80 psi max. Electrical requirements: 110 V. U.S. Electrical Motor 10 hp. Bermad, 350 series back wash valve. Overall dimensions: 3 ft. 6 in. L x 2 ft. 6 in. W x 5 ft. 3 in. H.(ACN110).

Click here for more information (459.1 KB)
Click here for specifications (226.0 KB)

Click On Picture

VRTX Water Treatment System

VRTX Water Treatment System
Mfg: VRTX Model: VRTX 125
Stock No: DNBA024 Serial No:
VRTX Water Treatment System. Model: VRTX 125. Capacity: 125 gph. Used in combination with a water filtration system for the non-chemical water treatment of open cooling towers or evaporative condensers. Advantages in using the VRTX system include control of bacteria, corrosion and scale build-up in those water systems. G&L centrifugal pump: size: 1.5 x 2.5 x 8. Baldor industrial motor, 15 hp, 208-230 / 460V, 3450 rpm, 60Hz, 3 phase. Overall dimensions: 3 ft. 4 in. L x 2 ft. 3 in. W x 4 ft. 4 in. H.(ACN316).

Click here for more information (531.4 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser- 75 Ton

SOLD Baltimore Aircoil Company Evaporative Condenser- 75 Ton
Mfg: Baltimore Aircoil Company Model: VNC75
Stock No: tMMO002. Serial No: 775173P
Baltimore Aircoil Company Evaporative Condenser- 75 Ton. Model: VNC75. S/N: 775173P. Belt No: B68. Nominal tonnage is based on using R-22. Nominal tonnage for ammonia: 50 Ton. Condenser is constructed of heavy duty hot-dip galvanized steel panels, the coil is continuous serpentine steel tubing, and its design features large orifice, non-clog nozzles. Inlets: (1) 2 in. dia. refrigerant pipe. Outlets: (1) 1-1/2 in. dia. refrigerant discharge, ( 1) 2 in. dia. ball valve NPT (female). Overall dimensions: 11 ft. 3 in. L x 48 in. W x 104 in. H (144 in. H with base).

SOLD

Click here for more information (299.3 KB)

Click On Picture

Evapco Evaporative Condensers /Fluid Coolers - 670 Ton

SOLD Evapco Evaporative Condensers /Fluid Coolers - 670 Ton
Mfg: Evapco Model:
Stock No: DEME2760C.278a Serial No:
(2) Evapco Evaporative Condensers /Fluid Coolers - 670 Ton (each). The unit was split into two separate smaller units from a two cell system. Capacity (each unit): 8.071614 MBH; 670 tons (1667 gpm, 95 °F in; 86 °F out; 68 °F WB). Fan Motor (each unit): 40 hp, 460 V, 3 phase, 60 Hz. Pump Motor (each unit): 10 hp, 460 V, 3 phase, 60 Hz. This system was installed and basically un-used by a plant called Komatsu that was to build wafers for the semiconductor industry that never got into production. Overall dimensions: 20 ft. 2-3/4 in. L x 5 ft. 11 in. W x 7 ft. 11-5/16 in. ACN850.

SOLD

Click here for more information (366.6 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser Unit- 300 Ton

SOLD Baltimore Aircoil Company Evaporative Condenser Unit- 300 Ton
Mfg: Baltimore Aircoil Company Model: C1483-LM
Stock No: pHDNN661. Serial No: 93100496
Baltimore Aircoil Company Evaporative Condenser Unit- 300 Ton. Model: C1483-LM. S/N: 93100496. Belt No: B-135. (2) Unimount 125 motors, 15 hp, 1765 rpm, 230/460 V, 60 Hz, 39.2/19.6 FLA, 48/24 SFA, 3 phase. Ratio (pulley): 5-1. (4) Turbine-fans: 30 in. diameter x 28 in. L. (4) Air inlets: 31 in. L x 29 in. H. (2) Drop eliminator systems with condenser tube sections; (2) tube circuits each section. (2) Manways: 22 in. diameter. Overall dimensions (fan-turbine unit): 300 in. L x 96 in. W x 98 in. H. Overall dimensions (each drop eliminator): 168 in. L x 100 in. W x 64 in. H.

SOLD

Click here for more information (558.8 KB)

Click On Picture

SOLD Baltimore Aircoil Company Condenser  SOLD

SOLD Baltimore Aircoil Company Condenser
Mfg: Baltimore Aircoil Company Model: VLC-200
Stock No: 165.sc9681.125 Serial No:
Baltimore Aircoil Company Condenser Model VLC-200, 200 nominal tons.

SOLD

Click here for more information (628.5 KB)

Click On Picture

SOLD Evapco Condenser SOLD

SOLD Evapco Condenser
Mfg: Evapco Model: LSCB-80
Stock No: 75.124.40a Serial No: 970390
Evapco Inc. evaporative condenser model no. LSCB 80 serial no. 970390 belt b 77 coil test pressure 350 psig, 6 foot length x 49 inch width x 100 inch height.

SOLD

Click here for more information (82.7 KB)

Click On Picture

SOLD Evapco Evaporative Condensor SOLD

SOLD Evapco Evaporative Condensor
Mfg: Evapco Model: PMWA-116D
Stock No: 75.WFF1a Serial No: 870261
Evapco Evaporative Condensor, PMWA-116D, serial number 870261, 350psig, beltnumber 2B-136, Baldor JMM3218T 5hp 208-460V, 1725rpm, 20in D manhole, 5ftW fans, 13ft L x 10ft W x 14ft H.

SOLD

Click here for more information (59.6 KB)

Click On Picture

SOLD Evapco Evaporative Condenser  SOLD

SOLD Evapco Evaporative Condenser
Mfg: Evapco Model:
Stock No: 55.ACEU78 Serial No:
Evapco Evaporative Condenser

SOLD

Click here for more information (273.8 KB)

Click On Picture

SOLD Evapco Condenser  SOLD

SOLD Evapco Condenser
Mfg: Evapco Model: PMCB-335
Stock No: 145.EMSC1.100 Serial No: 983417
1998 Evapco Condenser, Model PMCB-335, S/N 983417.

SOLD

Click On Picture

SOLD Imeco Condenser  SOLD

SOLD Imeco Condenser
Mfg: Imeco Model: AEC295
Stock No: 95.sc8681.65 Serial No:
Imeco Condenser Model AEC295, 140 nominal tons.

SOLD

Click here for more information (855.6 KB)

Click On Picture

SOLD Baltimore Aircoil Company Condenser SOLD

SOLD Baltimore Aircoil Company Condenser
Mfg: Baltimore Aircoil Company Model: BAC-C1664
Stock No: EMSC02 Serial No: 92100177
Baltimore Aircoil Company Condenser, Model BAC-C1664, S/N: 92100177, Heat of Rejection:11,818,800 btuh. Shipping weight: 29,620 lbs; operating weight: 42,520 lbs; heaviest section: 21,400 lbs; 127,900 cfm; (2) 40 hp motor (0 in. ESP); 835 gpm; 804 corrected Evaporator tons; 8.0 KW; 10 Canadian KW. (N. Dakota)

SOLD

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser
Mfg: Baltimore Aircoil Company Model: VC1-N230PU
Stock No: ACEE01.65 Serial No: U01682401
Baltimore Aircoil Company Evaporative Condenser, Model VC1-N230PU, S/N U01682401, this condenser can be used for ammonia or freon, it was last used with 218 tons of R-22 refrigerant at 105F condensing temperature, 20F suction temperature and 78F entering wet bulb. Fan motor: (1) 15 hp, 1,800 /900 rpm, 3 phase, 60 hertz, 460 volt, 2 speed, 1 winding, TEFC enclosure fan drives based on 0 in. ESP. Pump motor: (1) 2 hp, 1,800 rpm, 3 phase, 60 hertz, 460 volt, TEFC enclosure. 12/08/2000

SOLD

Click here for more information (635.1 KB)

Click On Picture

SOLD Ketema Inc. Heat Transfer Div. CO2 Condenser SOLD

SOLD Ketema Inc. Heat Transfer Div. CO2 Condenser
Mfg: Ketema Inc. Model: HFC-2-STL
Stock No: 250-SC-3551 Serial No: U924877A
Ketema Inc. Heat Transfer Div. CO2 condenser, 1993, nat'l brd. 6117, type HFC-2-STL (BEM), size 23-B-144, serial no. U924877A, shell 250 psi @ -20 and 200, tube 350 psi @ -20 and 200.

SOLD

Click On Picture

SOLD Baltimore Air Coil Condenser SOLD

SOLD Baltimore Air Coil Condenser
Mfg: Baltimore Air Coil Model: T1443PC
Stock No: EECS350.5 Serial No: 89100.83
Baltimore Air Coil Condenser. Model T1443PC, S/N 89100.830

SOLD

Click On Picture

SOLD Evapco Condenser SOLD

SOLD Evapco Condenser
Mfg: Evapco Model: PMC 600
Stock No: 75.PMI495a Serial No:
Evapco PMCB 600 Condenser.

SOLD

Click here for more information (186.6 KB)

Click On Picture

SOLD Evapco Evaporative Condenser SOLD

SOLD Evapco Evaporative Condenser
Mfg: Evapco Model: PMCA-125
Stock No: LCNM005. Serial No: 929394
Evapco Evaporative Condenser. Model PMCA-125, S/N 929394, Belt No. 2B-99, Coil Test Pressure 350 psig. Manhole 20 in. diameter. Has and Electrical Motor Pump: Model YVJ145TTDR5348AA, 1- hp, 1,735 rpm, 60 Hz, 3 phase, 208/230/460 volt, 190/380 amps. Inlets (1) 2 in., Outlet (1) 2 in. Opening on top is 58 in. W, 103 in. L. Has 17 sprayers for Water on top. Has two fans each at 51 in. diameter. Single motor runs both fans. Motor is 5hp. Overall measurements 75 in. W, 108 in. L, 74 in. H.

SOLD

Click here for more information (760.2 KB)

Click On Picture

SOLD Baltimore Aircoil Company Condenser 170 SOLD

SOLD Baltimore Aircoil Company Condenser 170
Mfg: Baltimore Aircoil Company Model: VC2-N170
Stock No: EMSC03.70 Serial No: 503801
1998 Baltimore Aircoil Company Condenser . Model VC2-N170, S/N 0503801.

SOLD

Click here for more information (4,935.5 KB)

Click On Picture

SOLD Evapco Condenser SOLD

SOLD Evapco Condenser
Mfg: Evapco Model: PMCB 600
Stock No: 40.PMI494a Serial No:
Evapco PMCB 600 Condenser.

SOLD

Click here for more information (353.1 KB)

Click On Picture

SOLD Baltimore Aircoil Company Condenser 1885 SOLD

SOLD Baltimore Aircoil Company Condenser 1885
Mfg: Baltimore Aircoil Company Model: VC2-581
Stock No: 200.cSC04.150 Serial No: 96600362
Baltimore Aircoil Company Condenser 1885, Model VC2-581, S/N 96600362.

SOLD

Click here for more information (110.0 KB)

Click On Picture

SOLD 2003 Evapco Evaporative Condenser SOLD

SOLD 2003 Evapco Evaporative Condenser
Mfg: Evapco Model: PMCB530S
Stock No: CAM001. Serial No: M025554
2003 Evapco Evaporative Condenser. Model PMCB530S. S/N M025554. (2) fans- 10 hp and 5 hp. 460 V, 60 Hz, 3 phase. Pump- 7-1/2 hp. 460 V, 60 Hz, 3-phase. Dimensions: Tower bottom section- 19 ft. 9 in. L x 9 ft. 10 in. W x 8 ft. 6 in. H. Top section- 19 ft. 9 in. L. x 9 ft. 10 in. W x 4 ft. 6 in. H. This unit is the same as a PMCB 630 Model except the fan motors are smaller.

SOLD

Click here for more information (562.6 KB)

Click On Picture

SOLD 2000 Imeco Evaporative Condenser 70 Ton SOLD

SOLD 2000 Imeco Evaporative Condenser 70 Ton
Mfg: Imeco Model: XLC-100
Stock No: MKKB001.10 Serial No: 25758-1 RH
2000 Imeco Evaporative Condenser- 70 Ton. Model: XLC-100. S/N: 25758-1 RH. Belt: BP99. MAWP: 300 psi. Refrigerant: R-717. The XLC condenser is recommended in situations where close control of condensing pressure is desired. This model offers a quiet-operating centrifugal fan. Fan Motor, 7.5 hp, 460 V, 10.2 FLA. Inlets: (1) 3 in. dia. feed pipe with a 4-bolt sq. flange that has (4) 3/4 in. dia. attachment holes at a center-to-center distance of 5 in. Outlets: (1) 2 in. refrigerant discharge pipe, (2) 2 in. dia. pipes (dewater). Overall dimensions: 12 ft. 3 in. L x 34 in. W x 107 in. H.

SOLD

Click here for more information (439.0 KB)

Click On Picture

SOLD Baltimore Air Coil Evaporative Condenser- 300 Ton SOLD

SOLD Baltimore Air Coil Evaporative Condenser- 300 Ton
Mfg: Baltimore Air Coil Model: VXMC-300
Stock No: BAOT165. Serial No: 81-9244
Baltimore Air Coil Evaporative Condenser- 300 Ton. Model: VXMC-300. SN: 81-9244. Belt No: 13-144. Refrigerants: R-22 or Ammonia. Nominal tonnage is based on 105 F condensing temperature, a 40 F suction temperature, and a 78 F wet-bulb temperature. Unit contains (2) blower fans with 10 hp U.S. Motors and a Paco centrifugal pump. Inlets/outlets: (4) 4 in. dia. valves. Overall dimensions: 13 ft. 9 in. L x 9 ft.11 in. W x 12 ft. 11 in. H.

SOLD

Click here for more information (316.2 KB)

Click On Picture

SOLD 1998 Imeco 3-Fan Evaporative Condenser - 430 Ton SOLD

SOLD 1998 Imeco 3-Fan Evaporative Condenser - 430 Ton
Mfg: Imeco Model: XLP-M430
Stock No: DPFI794.4 Serial No: 16842-1RH
1998 Imeco 3-Fan Evaporative Condenser - 430 Ton. Model: XLP-M430. S/N: 16824-1 RH. Shop Order No: 16824-1. Belt size: BP120. Refrigerant: R-717. Max pressure: 250 psi. U.S. Motor, 10 hp, 460 V, 12.6 FLA. Condenser features (3) 48 in. diameter fans. Centrifugal Pump, no nameplate information. U.S. Motor, 5 hp, 1745 rpm, 208-230/460 V, 15.0-13.6/6.8 amps, 60 Hz, 3 phase. Inlets/outlets: (4) 4 in. dia. pipes. Overall dimensions: 16 ft. L x 8 ft. W x 15 ft. H.

SOLD

Click here for more information (377.3 KB)

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton
Mfg: Baltimore Aircoil Company Model: VC1-804-QM
Stock No: PIDC004. Serial No: 97101048
Baltimore Aircoil Company Evaporative Condenser- 804 Ton. Model: VC1-804-QM, S/N: 97101048. Belt: B142. Nominal tonnage based on R-22 at 105 F condensing temperature, 40 F suction temperature, and 78 F wet-bulb temperature. Airflow: 127,900 cfm. 570 Ton (R-717). Unit contains (2) 22 in. dia. manways, (4) 27 in. dia. blower fans, (2) 108 in. L x 98 in. W x 44 in. H Sound attenuating filters, BAC centrifugal pump, (2) U.S. fan motors: 50 hp. Overall dimensions: 19 ft. L x 11 ft. 10 in. W x 22 ft. H.

SOLD

Click here for more information (314.5 KB)

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton
Mfg: Baltimore Aircoil Company Model: VC1-804-QM
Stock No: PIDC003. Serial No: 97101051
Baltimore Aircoil Company Evaporative Condenser- 804 Ton. Model: VC1-804-QM, S/N: 97101051. Belt: B142. Nominal tonnage based on R-22 at 105 F condensing temperature, 40 F suction temperature, and 78 F wet-bulb temperature. Airflow: 127,900 cfm. 570 Ton (R-717). Unit contains (2) 22 in. dia. manways, (4) 27 in. dia. blower fans, (2) 108 in. L x 98 in. W x 44 in. H Sound attenuating filters, BAC centrifugal pump, (2) U.S. fan motors: 50 hp. Overall dimensions: 19 ft. L x 11 ft. 10 in. W x 22 ft. H.

SOLD

Click here for more information (350.7 KB)

Click On Picture

SOLD 1993 Baltimore Air Coil 3-Fan Evaporative Condenser System SOLD

SOLD 1993 Baltimore Air Coil 3-Fan Evaporative Condenser System
Mfg: Baltimore Air Coil Model: C1662-M
Stock No: DPFI792.8a Serial No: 93100537
1993 Baltimore Air Coil 3-Fan Evaporative Condenser System. Model-C1662-M. S/N 93100537. 411tr.

SOLD

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton
Mfg: Baltimore Aircoil Company Model: VC1-804-QM
Stock No: PIDC002. Serial No: 97101052
Baltimore Aircoil Company Evaporative Condenser- 804 Ton. Model: VC1-804-QM, S/N: 97101052. Belt: B142. Nominal tonnage based on R-22 at 105 F condensing temperature, 40 F suction temperature, and 78 F wet-bulb temperature. Airflow: 127,900 cfm. 570 Ton (R-717). Unit contains (2) 22 in. dia. manways, (4) 27 in. dia. blower fans, (2) 108 in. L x 98 in. W x 44 in. H Sound attenuating filters, BAC centrifugal pump, (2) U.S. fan motors: 50 hp. Overall dimensions: 19 ft. L x 11 ft. 10 in. W x 22 ft. H.

SOLD

Click here for more information (557.0 KB)

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton
Mfg: Baltimore Aircoil Company Model: VC1-804-QM
Stock No: PIDC006. Serial No: 97101050
Baltimore Aircoil Company Evaporative Condenser- 804 Ton. Model: VC1-804-QM, S/N: 97101050. Belt: B142. Nominal tonnage based on R-22 at 105 F condensing temperature, 40 F suction temperature, and 78 F wet-bulb temperature. Airflow: 127,900 cfm. 570 Ton (R-717). Unit contains (2) 22 in. dia. manways, (4) 27 in. dia. blower fans, (2) 108 in. L x 98 in. W x 44 in. H Sound attenuating filters, BAC centrifugal pump, (2) U.S. fan motors: 50 hp. Overall dimensions: 19 ft. L x 11 ft. 10 in. W x 22 ft. H.

SOLD

Click here for more information (491.5 KB)

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser- 804 Ton
Mfg: Baltimore Aircoil Company Model: VC1-804-QM
Stock No: PIDC008. Serial No: 97101046
Baltimore Aircoil Company Evaporative Condenser- 804 Ton. Model: VC1-804-QM, S/N: 97101046. Belt: B142. Nominal tonnage based on R-22 at 105 F condensing temperature, 40 F suction temperature, and 78 F wet-bulb temperature. Airflow: 127,900 cfm. 570 Ton (R-717). Unit contains (2) 22 in. dia. manways, (4) 27 in. dia. blower fans, (2) 108 in. L x 98 in. W x 44 in. H Sound attenuating filters, BAC centrifugal pump, (2) U.S. fan motors: 50 hp. Overall dimensions: 19 ft. L x 11 ft. 10 in. W x 22 ft. H.

SOLD

Click here for more information (405.6 KB)

Click On Picture

SOLD Baltimore Aircoil Company  Evaporative Condenser SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser
Mfg: Baltimore Aircoil Company Model: VC1-804-QM
Stock No: PIDC001. Serial No: 97101049
(5) Baltimore Aircoil Company Evaporative Condensers. Model VC1-804-QM. S/N 97101049. (2) Fan motors: 50 hp. Pump motor: 5 hp. Overall dimensions 17 ft. 8 in. L x 11 ft. 10 in. W x 174 in. H. For shipping 17 ft. 8 in. split in two sections.

SOLD

Click here for more information (816.4 KB)

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser- 150 Ton SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser- 150 Ton
Mfg: Baltimore Aircoil Company Model: C2443-K
Stock No: tFEC05. Serial No: 94601000
Baltimore Aircoil Company Evaporative Condenser- 150 Ton. Model: C2443-K, S/N: 94601000. Current Model: VC2N261. Actual rating: Freon tons: 261. Ammonia tons: 185. Belt No: B136. Condenser: (1) 72-1/2 in. dia. x 38 in. L fan; (16) fan blades; (1) 22 in. dia. manway. Inlets/outlets: (1) 1 in. dia. hose, (1) 2 in. dia. PVC, (3) 3 in. dia NPT, (1) 6 in. dia. pipe. Baldor Industrial Fan Motor: 3 hp, 1725 rpm, 230/460 V, 8.2/4.1 amps, 60 Hz, 3 phase.

SOLD

Click here for more information (238.6 KB)

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser- 711 Ton. SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser- 711 Ton.
Mfg: Baltimore Aircoil Company Model: C2664MS
Stock No: ENDC001. Serial No: 91101253
Baltimore Aircoil Company Evaporative Condenser- 711 Ton. Model C2664MS, S/N 91101253. Nominal tons: 711. (2) Fan Motors: (1) Lincoln, S/N 3791515, 20 hp, 1750 rpm, 3 phase, 60 Hz, 49.6/24.8 amps, 230/460 V; (1) U.S., 10 hp, 1730 rpm, 3 phase, 60 Hz, 30.0-2.2/13.6 amps, 208-230/460 V. Pace pump, Model 30- 563, S/N UPM080191G, 5 hp, 230/460 V, 3 phase, 60 Hz, 1,745 rpm.

SOLD

Click here for more information (98.1 KB)

Click On Picture

SOLD Baltimore Aircoil Company Evaporative Condenser- 711 Ton SOLD

SOLD Baltimore Aircoil Company Evaporative Condenser- 711 Ton
Mfg: Baltimore Aircoil Company Model: C2664MS
Stock No: ENDC002. Serial No: 91101254
Baltimore Aircoil Company Evaporative Condenser- 711 Ton. Model C2664MS, S/N 91101254. Nominal tons: 711. (2) Fan Motors: (1) Lincoln, S/N 3791580, 20 hp, 1750 rpm, 3 phase, 60 Hz, 49.6/24.8 amps, 230/460-208 V; (1) U.S.,10 hp, 1720 rpm, 3 phase, 60 Hz, 30.0-2.2/13.6 amps, 208-230/460 V. Pace pump, Model 30- 563, S/N UPM072591G, 5 hp, 230/460 V, 3 phase, 60 Hz, 1745 rpm.

SOLD

Click here for more information (98.2 KB)

Click On Picture

SOLD Baltimore Aircoil Company Cooling Tower/Evaporative Condenser- 18 Ton SOLD

SOLD Baltimore Aircoil Company Cooling Tower/Evaporative Condenser- 18 Ton
Mfg: Baltimore Aircoil Company Model: F1722-HR
Stock No: TMSI01.5 Serial No: U012535302
Baltimore Aircoil Company Cooling Tower/Evaporative Condenser- 18 Ton. Model F1722-HR. S/N: U012535302. Belt: B72. Capacity: 35 U.S. gpm water from 100 F to 85 F at 75 F entering wet bulb and 0.12 psi fluid pressure drop. Features: counterflow, blow-through design closed circuit cooling tower, all designated steel components are constructed from G-235 (2700 metric) hot-dipped galvanized steel protected with the BALTIBOND corrosion protection system. Coil MAWP: 300 psig (2170 kPa). Pneumatic test pressure under water: 375 psig (2685 kPa). Inlets/outlets (top to bottom): (1) 2-1/2 in., (1) 2-1/2 in., (1) 1-1/2 in., (1) 2 in. (1) 2 in. (2) 3/4 in. (pvc). Overall dimensions: 90 in. L x 51 in. W x 12 ft. 3 in. H.

SOLD

Click here for more information (261.2 KB)

Click On Picture

SOLD 1996 Imeco Evaporative Condenser SOLD

SOLD 1996 Imeco Evaporative Condenser
Mfg: Imeco Model: XLP-M-320
Stock No: PTBD012. Serial No: 10188-1 RH
1996 Imeco Evaporative Condenser. Model XLP-M-320. S/N 10188-1 RH. Motor 10 hp, 460 V, 250 psig. FLA 13.

SOLD

Click here for more information (71.8 KB)

Click On Picture

SOLD Evapco Evaporative Condenser Unit- 315 Ton.  SOLD

SOLD Evapco Evaporative Condenser Unit- 315 Ton.
Mfg: Evapco Model: LSCB-315
Stock No: GPS2001.100 Serial No: 5132070
Evapco Evaporative Condenser Unit- 315 Ton. Model: LSW-87A. S/N: 5132070. Belt No: B-92. Refrigerant: R-22. Capacity: 500 gpm (30,000 gph) of water from 103 F - 91 F @ 75 F wet bulb. This was shipped from the factory as a Evapco Fluid Cooler, Model LSW-87A, S/N: 5132070, but essentially the same as an LSCB-315 if rated as an evaporative condenser. G-235 Hot dip galvanized steel construction. Manway: 21 in. diameter. (9) Eliminators: 20 in. L x 5 in. W x 70 in . H. LSW series centrifugal fan forced draft units are recommended for a wide range of applications especially where noise is a concern. Inlets: (1) 4 in. diameter PVC pipe, (2) 4-1/2 in. dia. media pipes. Outlets: (1) 4 in. diameter PVC pipe, (2) 4-1/2 in. dia. media pipes. Overall dimensions (complete machine): 18 ft. 8 in. L x 85 in. W x 115 in. H. ACN400.

SOLD

Click here for more information (918.7 KB)

Click On Picture

Evapco Condenser-950 Ton

SOLD Evapco Condenser-950 Ton
Mfg: Evapco Model: PMCB-950
Stock No: DTTC845. Serial No: 971983-03M
Evapco Condenser-950 Ton. Model PMCB-950. S/N 971983-03M. 4 fans w/ 2 motors. (SR350).

SOLD

Click here for more information (183.5 KB)

Click On Picture

Evapco Condenser-950 Ton

SOLD Evapco Condenser-950 Ton
Mfg: Evapco Model: PMCB-950
Stock No: DTTC846. Serial No: 964569M
Evapco Condenser-950 Ton. Model PMCB-950. S/N 964569M. 4 fans w/ 2 motors. (ACN910).

SOLD

Click here for more information (336.7 KB)

Click On Picture

Evapco Condenser-950 Ton

SOLD Evapco Condenser-950 Ton
Mfg: Evapco Model: PMCB-950
Stock No: DTTC847. Serial No: 964568M
Evapco Condenser-950 Ton. Model PMCB-950. S/N 964568M, 4 fans w/ 2 motors. Excellent coils. (SR350).

SOLD

Click here for more information (175.8 KB)

Click On Picture

Baltimore Aircoil Company Condenser-1504 Ton

SOLD Baltimore Aircoil Company Condenser-1504 Ton
Mfg: Baltimore Aircoil Company Model: VC2-1504
Stock No: DTTC849. Serial No: 98170116
Baltimore Aircoil Company Condenser-1504 Ton. Model VC2-1504. S/N 98170116. 6 fans w/ 4 motors. Clean (SR450)

SOLD

Click On Picture

Evapco Condenser-1060 Ton

SOLD Evapco Condenser-1060 Ton
Mfg: Evapco Model: PMCA-1060
Stock No: DTTC852. Serial No: 881631RH
Evapco Condenser-1060 Ton. Model PMCA-1060. S/N 881631RH. 6 fans w/4 motors. Stainless illiminators. (SR200).

SOLD

Click here for more information (248.3 KB)

Click On Picture

Evapco Condenser-920 Ton

SOLD Evapco Condenser-920 Ton
Mfg: Evapco Model: PMC-920N
Stock No: DTTC855. Serial No: 879224
Evapco Condenser-920 Ton. Model PMC-920N. S/N 879224, 6 fans w/4 motors. Stainless illiminators. (SR100).

SOLD

Click here for more information (316.5 KB)

Click On Picture

Evapco Condenser-1030 Ton

SOLD Evapco Condenser-1030 Ton
Mfg: Evapco Model: PMCB-1030
Stock No: DTTC863. Serial No: MOO4886
Evapco Condenser-1030 Ton. Model PMCB-1030. S/N MOO4886, cap. 613.0, pump 10 hp , hp per TR, 0.090, water make-up 22.0 gpm, 4 fans w/2 motors. Good coils. (SR375). (ACN930).

SOLD

Click here for more information (807.9 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser-1800 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser-1800 Tons
Mfg: Baltimore Aircoil Company Model: VC2-1504
Stock No: ASLC001. Serial No: 94201483
Baltimore Aircoil Company Evaporative Condenser-1800 Tons. Model VC2-1504. S/N 94201483. Belt No. 3BP150. With pan heaters, 22,792.5 mbh @ 95°F condensing and 66°F wetbulb. Dimensions 35 ft. 6 in. L x 11 ft. 10 in. W. Estimated cost new $115,000.

SOLD

Click here for more information (1,641.2 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser-1240 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser-1240 Tons
Mfg: Baltimore Aircoil Company Model: VC2-982
Stock No: ASLC002. Serial No: 94201484
Baltimore Aircoil Company Evaporative Condenser-1240 Tons. Model VC2-982. S/N 94201484. Belt No. 2BP150. With pan heaters, 14,882 mbh @95 °F condensing and 66 °F wetbulb. Estimated cost new $75,000.

SOLD

Click here for more information (1,462.2 KB)

Click On Picture

Recold Fluid Cooler/Evaporative Condenser- 320 Ton

SOLD Recold Fluid Cooler/Evaporative Condenser- 320 Ton
Mfg: Recold Model: JC 320
Stock No: ME0305b. Serial No: 89338
Recold Fluid Cooler/Evaporative Condenser- 320 Ton. Model JC 320. S/N 89338. Refrigerant charge: 455 lbs (R-22). Capacity per tube circuit: 33495 Btuh. Total unit capacity: 4,689,300 Btuh. Sump capacity: 454 gal. Air volume: 5000 cfm. Coil face: 85.5 sq. ft. Number of tube circuits: 140. Spray water: 325 gpm. Operating weight: 11900 lbs. Fan 30 hp. The Model JC Evaporative Condenser is a ruggedly built unit constructed to provide many years of durable, dependable service with minimal maintenance requirements. (7) 23 in. L x 17 in. W access doors. Inlets: (4) 3 in. dia. port, Outlets: (4) 3 in. dia. port. Top is galvanized. Coil is copper and has been capped. Dimensions: 217 in. L x 93-1/2 in. W x 98 in. H.

SOLD

Click here for more information (572.1 KB)

Click On Picture

1993 Baltimore Aircoil Company Evaporative Condenser

SOLD 1993 Baltimore Aircoil Company Evaporative Condenser
Mfg: Baltimore Aircoil Company Model: F 1342-M
Stock No: LCTC001. Serial No: 93200984
1993 Baltimore Aircoil Company Evaporative Condenser. Model F 1342-M, S/N: 93200984. (BAC VC1N208). Belt No: B136. Rated at 215 tons freon and 155 tons ammonia. Capacity: 425 gpm water from 103 ºF to 90 ºF at 70 ºF entering wet bulb and 4.1 psi fluid pressure drop. Airflow: 44,000 cfm. Heat rejection: 212,400 Btu/hr. Fan motors: (1) 20 hp, 1800 rpm, 3 phase, 60 Hz, 230/460, 480 V. BAC Centrifugal Spray Pump, S/N: NHM011493E, capacity: 304 gpm @ 15.4 tdh, impeller diameter: 8.4 in. U.S. Motor, 2 hp, 1725 rpm, 60 Hz, 208-230/460 V, 6.2/3.1 amp, 3 phase. Inlets: (1) 3 in. dia. PVC pipe (water), (2) 4 in. dia. refrigerant pipe. Outlets: (2) 4 in. dia. refrigerant discharge. Overall dimensions: 13 ft. 6 in. L x 94 in. W x 11 ft. 8 in. H.

SOLD

Click here for more information (422.6 KB)

Click On Picture

Evapco Condenser-850 Ton

SOLD Evapco Condenser-850 Ton
Mfg: Evapco Model: PMCB-850
Stock No: DTTC859. Serial No: 986235M-M
Evapco Condenser-850 Ton. Model PMCB-850. S/N 986235M-M. Cap. 472.9, pump 10 hp , hp per TR, 0.040 , water make-up 16.9 gpm, 4 fans w/2 motors. Good coils. (SR300). (ACN830).

SOLD

Click here for more information (270.5 KB)

Click On Picture

2001 Evapco PMCB-Series Evaporative Condenser- 350 Tons

SOLD 2001 Evapco PMCB-Series Evaporative Condenser- 350 Tons
Mfg: Evapco Model: PMCB 350
Stock No: CSRW005. Serial No: W017199
2001 Evapco PMCB-Series Evaporative Condenser- 350 Tons. Model: PMCB 350. S/N: W017199. Last used with ammonia. Coil test pressure: 400 psig. Coil volume: 44 cu. ft. Air flow: 61,600 cfm. Evapco Pumps with US Motors, 5 hp, 1750 rpm, 208-230/460 V, 14.6-13.7/6.8 amps, 60 Hz, 3 phase. (2) 60 in. dia. fans with US Fan Motor, 10 hp, 1760 rpm, 230/460 V, 24.6/12.3 amps, 60 Hz, 3 phase. Evapco PMCB units are heavy-duty construction and designed for long trouble-free operation. Axial fan design. Inlets: (4) 6 in. dia. ports, (1) 4 in. dia. port, (1) 3 in. dia. port with 4-bolt flange. Outlets: (1) 6 in. dia. port, (1) 4 in. dia. port, (1) 5 in. dia. port with an 8-bolt flange, (1) 3 in. dia. port. Overall dimensions: 14 ft. 7 in. L x 9 ft. 10 in. W x 13 ft. 2 in. H. (ACN385).

SOLD

Click here for more information (274.3 KB)
Click here for Evapco Condenser drawings (159.5 KB)

Click On Picture

Evapco LSWA-Series Evaporative Condenser/Fluid Cooler- 40 Nominal Ton

SOLD Evapco LSWA-Series Evaporative Condenser/Fluid Cooler- 40 Nominal Ton
Mfg: Evapco Model: LSWA20AA2
Stock No: KRZY001.10 Serial No: 969088W
Evapco LSWA-Series Evaporative Condenser/Fluid Cooler- 40 Nominal Tons. Model: LSWA20AA2. S/N: 969088W. Airflow: 12,100 cfm. Spray pump capacity: 120 gpm. Remote sump (required capacity): 80 gal. Coil volume: 41 gal. Paco Centrifugal Pump, S/N: A4804. Marathon Electric Motor, 1-1/2 hp, 3450/2850 rpm, 208-230/460 190/380 V, 4.9-5.0/2.5 4.3/2.15 amps, 60/50 Hz, 3 phase. Pump Motor, 3/4 hp, 1750 rpm, 230/460 V, 3.6/1.8 amps, 60 Hz, 3 phase. Fan Motor, 5 hp. LSWA units are the result of Evapco's extensive experience in forced draft centrifugal fan designs. Easy to maintain and offer long, trouble free operation. G-235 Heavy mill-dip galvanized steel construction. Features the exclusive thermal-pak coil which provides maximum efficiency per plan area. Control panel. Overall dimensions 12 ft. L x 5 ft. 3-1/2 in. W x 7 ft. H.

SOLD

Click here for more information (167.0 KB)
Click here for drawings (198.3 KB)

Click On Picture

Evapco PMCB-Series Evaporative Condenser- 850 Nominal Tons

SOLD Evapco PMCB-Series Evaporative Condenser- 850 Nominal Tons
Mfg: Evapco Model: PMCB-850
Stock No: DTTC860. Serial No: 986236M-3M
Evapco PMCB-Series Evaporative Condenser- 850 Nominal Tons. Model: PMCB-850. S/N: 986236M-3M. Refrigerant: Ammonia. Unit heat rejection (base): 12,495 MBH. Spray pump capacity: 1370 gpm. Remote sump tank required: 850 gal. Coil test pressure: 350 psig. Coil volume: 110 gal. (4) 60 in. dia. fans. Airflow: 132,200 cfm. (2) Scot Pump with (1) U.S. Motor, 5 hp, 1745 rpm, 208-230/460 V, 15-13.6/6.8 amps, 60 Hz, 3 phase. Baldor Super-E Fan Motor, 15 hp, 1765 rpm, 230/460 V, 37/18.5 amps, 60 Hz, 3 phase. U.S. Fan Motor, 15 hp, 208-230/460 V, 46.0-27.0/13.5 amps, 1775 rpm, 60 Hz, 3 phase. Evapco PMCB units are heavy-duty construction and designed for long trouble-free operation. Axial fan design. Inlets: (4) 4 in. dia. ports, (1) 2 in. dia. port. Outlets: (4) in. dia. ports, (1) 2 in. dia. port. Overall dimensions: 26 ft. 4 in. L x 9 ft. 10 in. W x 16 ft. 7 in. H. (SR300). (ACN830).

SOLD

Click here for more information (397.9 KB)

Click On Picture

2001 Baltimore Aircoil Company Evaporative Condenser- 487 Ton

SOLD 2001 Baltimore Aircoil Company Evaporative Condenser- 487 Ton
Mfg: Baltimore Aircoil Company Model: VC1-487
Stock No: LPMC001.110 Serial No: V012959401
2001 Baltimore Aircoil Company Evaporative Condenser- 487 Ton. Model: VC1487. S/N: V012959401. Belt No: B158. Airflow: 77,500 cfm. Internal coil volume: 72 cu. ft. Nominal tons are based on using refrigerant R-22 at a 105 °F condensing temperature, a 40 °F suction temperature, and a 78 °F wet-bulb temperature. Nominal tonnage using refrigerant R-717 at a 96.3 °F condensing temperature, a 20 °F suction temperature, and a 78 °F wet-bulb temperature, 345 Tons. U.S. Motor, 40 hp, 1775/1465 rpm, 230/460-190/380 V, 92/46-113/56.7 amps, 60/50 Hz, 3 phase. (5) Spray lines. VCI units are suitable for indoor and outdoor installation and offer minimal sound levels. Series V Evaporative Condensers deliver fully rated thermal performance over a wide range of heat rejection and temperature requirements. In an indoor environment the centrifugal fans can overcome the static pressure imposed by external ductwork. Inlets: (2) 4 in. dia. media pipes. Outlets: (2) 4 in. dia. media pipes. Overall dimensions: 12 ft. L x 11 ft. 8 in. W x 14 ft. 5 in. H.

SOLD

Click here for more information (576.5 KB)

Click On Picture

Evapco Condenser-620 Ton

SOLD Evapco Condenser-620 Ton
Mfg: Evapco Model: PMC-620
Stock No: DTTC857. Serial No: 868572
Evapco Evaporative Condenser- 620 Ton. Model: PMC-620. S/N: 868572. Belt No: 2B-116. Test pressure: 350 psig. PMC Evaporative Condensers are forced draft, axial fan models. The effective axial flow fans can reduce power requirements by up to 50% over centrifugal fan models of similar capacity. Easy to Install, Easy to Maintain and Easy to Operate. Centrifugal Pump with Marathon Electric Motor, 5 hp, 1740 rpm, 208-230/460 V, 14.8-14.4/7.2-10.4/5.2 FLA, 60 Hz, 3 phase. (3) 59 in. dia. fans. (2) Baldor Super-E Fan Motors, 10 hp, 1750 rpm, 230/460 V, 60 Hz, 3 phase. Inlets: (1) 4 in. dia. port. Outlets: (2) 3 in. dia. ports. Overall dimensions: 19 ft. 7 in. L x 10 ft. W x 14 ft. 6 in. H. (SR180).

SOLD

Click here for more information (1,070.1 KB)

Click On Picture

Evapco PMCB Series Evaporative Condenser- 850 Nominal Tons

SOLD Evapco PMCB Series Evaporative Condenser- 850 Nominal Tons
Mfg: Evapco Model: PMCB-850
Stock No: DTTC858. Serial No: 986234M3M
Evapco PMCB Series Evaporative Condenser- 850 Nominal Tons. Model: PMCB-850. S/N: 986234M3M. Belt No: 2B-133. Coil test pressure: 350 psig. (2) Scot Centrifugal Motorpumps, Model: 58, size: 5x4, impeller diameter: 5.50 in. (2) U.S. Motors, 5.0 hp, 1745 rpm, 208-230/460 V, 15.0-13.6/6.8 FLA, 60 Hz, 3 phase. Fan diameter: 62 in. Inlets: (2) 4 in. dia. media ports. Outlets: (1) 2 in. dia. port, (1) 2-1/2 in. dia. port, (2) 4 in. dia. media ports. Overall dimensions: 26 ft. L x 10 ft. 2 in. W x 16 ft. 4 in. H. (SR300). (ACN830).

SOLD

Click here for more information (621.4 KB)
Click here for Drawings (648.0 KB)

Click On Picture

Evapco PMCA Series Evaporative Condenser- 850 Nominal Tons

SOLD Evapco PMCA Series Evaporative Condenser- 850 Nominal Tons
Mfg: Evapco Model: PMCA-850
Stock No: DTTC862. Serial No: 906282
Evapco PMCA Series Evaporative Condenser- 850 Nominal Tons. Model: PMCA-850. S/N: 906282. Belt No: 2B-133. Coil test pressure: 350 psig. Inlets: (2) 4 in. dia. media ports. Outlets: (2) 2 in. dia. overflow ports, (2) 4 in. dia. media ports. Overall dimensions: 26 ft. 8 in. L x 10 ft. 2 in. W x 14 ft. H.(SR250). (ACN830).

SOLD

Click here for more information (604.8 KB)

Click On Picture

2000 Evapco PMCB-Series Evaporative Condenser- 1030 Nominal Tons

SOLD 2000 Evapco PMCB-Series Evaporative Condenser- 1030 Nominal Tons
Mfg: Evapco Model: PMCB-1030
Stock No: DTTC861. Serial No: M004885
2000 Evapco PMCB-Series Evaporative Condenser- 1030 Nominal Tons. Model: PMCB-1030. S/N M004885. Refrigerant: Ammonia. Unit heat rejection (base): 15,141 MBH. Spray pump capacity: 1370 gpm. Remote sump tank required: 850 gal. Coil test pressure: 400 psig. Coil volume: 131 gal. (4) 60 in. dia. fans. Airflow: 154,200 cfm. (2) Scot Pumps with Baldor Motors, 5 hp, 1725 rpm, 208-230/460 V, 15-13.2/6.6 amps, 60 Hz, 3 phase. (2) Baldor Fan Motors, 30 hp, 1770 rpm, 230/460 V, 72/36 amps, 60 Hz, 3 phase. Evapco PMCB units are heavy-duty construction and designed for long trouble-free operation. Axial fan design. Inlets: (4) 4 in. dia. port, (1) 2 in. dia. port. Outlets: (4) in. dia. port, (1) 2 in. dia. port. Rate: 730 T.R. at 96.3F 20 degree suction and 78WB using R-717. Overall dimensions: 26 ft. 4 in. L x 9 ft. 10 in. W x 16 ft. 7 in. H. Note that the capacity is lower for ammonia. (SR350). (ACN930).

SOLD

Click here for more information (376.9 KB)
Click here for additional information (2,159.6 KB)

Click On Picture

Evapco Condenser-1060 Ton

SOLD Evapco Condenser-1060 Ton
Mfg: Evapco Model: PMCA-1060
Stock No: DTTC853. Serial No: 881632LH
Evapco Condenser-1060 Ton. Model PMCA-1060. S/N 881632LH. 6 fans w/4 motors. Stainless illiminators. (SR150).

SOLD

Click here for more information (596.8 KB)

Click On Picture

2001 Evapco Evaporative Condenser- 269 Ton

SOLD 2001 Evapco Evaporative Condenser- 269 Ton
Mfg: Evapco Model: LRW-68-4-2
Stock No: 2000.WYB. Serial No: M014877
2001 Evapco Evaporative Condensers- 269 Ton. Model: LRW-68-4-2. S/N's: M014877. Refrigerant: R-22. Conditions: 78 °F web bulb, 40 °F suction, 105 °F condensing temperature. Airflow: 43,240 cfm. Pumping capacity: 405 gpm. Coil volume: 266 gal. Centrifugal fan diameter: 27 in. Coil Test Pressure: 400 PSIGThe LRW is a low noise, low height, forced draft centrifugal design unit. Standard construction features the patented, high efficiency Thermal-Pak coil with a type 304 stainless steel cold water basin and G-235 galvanized steel casing. Included are the zero-maintenance PVC spray distribution headers with ZM nozzles. Motorpump 57E Standard Fitted, 4X3 BN-CM Seal, 1750 RPM. US Motor, 2 hp, 1725 rpm, 208-230/460 V, amps, Hz, phase. Fan Motor, 30 hp, 1765 rpm, 208-230/460 V, 60 Hz, 3 phase. Inlets: (2) 8 bolts 4 in. dia. flanges, 7 in. dia. NPT (female). Outlets: (2) 8 bolts 4 in. dia. flanges, (1) 2 in. dia. NPT (male), (1) 3 in. dia. NPT (male), (1) 8 bolts 4-1/2 in. dia. flange. Overall dimensions: 16 ft. 3-3/4 in. L x 7 ft. 10 in. W x 8 ft. 2-1/2 in. H. (ACN460).

SOLD

Click here for more information (320.7 KB)
Click here for Evapco Drawings. (44.8 KB)

Click On Picture

2001 Evapco Evaporative Condenser- 269 Ton

SOLD 2001 Evapco Evaporative Condenser- 269 Ton
Mfg: Evapco Model: LRW-68-4-2
Stock No: 2000.WYB2. Serial No: M014878
2001 Evapco Evaporative Condenser- 269 Ton. Model: LRW-68-4-2. S/N's: M014878. Refrigerant: R-22. Conditions: 78 °F web bulb, 40 °F suction, 105 °F condensing temperature. Airflow: 43,240 cfm. Pumping capacity: 405 gpm. Coil volume: 266 gal. Centrifugal fan diameter: 27 in. Coil Test Pressure: 400 PSIGThe LRW is a low noise, low height, forced draft centrifugal design unit. Standard construction features the patented, high efficiency Thermal-Pak coil with a type 304 stainless steel cold water basin and G-235 galvanized steel casing. Included are the zero-maintenance PVC spray distribution headers with ZM nozzles. Motorpump 57E Standard Fitted, 4X3 BN-CM Seal, 1750 RPM. US Motor, 2 hp, 1725 rpm, 208-230/460 V, amps, Hz, phase. Fan Motor, 30 hp, 1765 rpm, 208-230/460 V, 60 Hz, 3 phase. Inlets: (2) 8 bolts 4 in. dia. flanges, 7 in. dia. NPT (female). Outlets: (2) 8 bolts 4 in. dia. flanges, (1) 2 in. dia. NPT (male), (1) 3 in. dia. NPT (male), (1) 8 bolts 4-1/2 in. dia. flange. Overall dimensions: 16 ft. 3-3/4 in. L x 7 ft. 10 in. W x 8 ft. 2-1/2 in. H. (ACN460).

SOLD

Click here for more information (273.3 KB)
Click here for Drawings (44.8 KB)

Click On Picture

Imeco Evaporative Condenser

SOLD Imeco Evaporative Condenser
Mfg: Imeco Model: XLP226R
Stock No: HDCW206.2a Serial No: 0023A1
Imeco Evaporative Condenser. Model: XLP226R. S/N: 0023A1.

SOLD

Click On Picture

2005 Baltimore Aircoil Company Evaporative Condenser- 103 Nominal Tons

SOLD 2005 Baltimore Aircoil Company Evaporative Condenser- 103 Nominal Tons
Mfg: Baltimore Aircoil Company Model: CXV-103
Stock No: BIIR8001. Serial No: U052807101
2005 Baltimore Aircoil Company Evaporative Condenser 103 Nominal Tons. Model: CXV-103. S/N: U052807101. Refrigerant: Ammonia (R-717). Rated for 96.3°F condensing, 20° suction, and 78°F wet-bulb. Baldor Industrial Motor, 2 hp, 1725 rpm, 208-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase. (2) 48 in. dia. axial fans. U.S. Fan Motor. BAC Centrifugal Pump, S/N: 03/03/05, P/N: BAC300617, impeller diameter: 4.80 in. Belt No: B93. CXV models deliver efficient performance in an easy-to-maintain package. BACs combined flow technology provides maximum capacity at the lowest refrigerant charge available in the industry by incorporating fill media into the traditional evaporative condenser. In addition, CXV models are designed to mount directly on existing support steel of both cross flow and counter flow units, making them a direct replacement option for almost any existing model. Inlets: (1) 4 in. dia. refrigerant port. Outlets: (1) 2 in. dia. NPT (pan drain), (1) 3 in. dia. overflow port, (1) 4 in. dia. refrigerant port. Overall dimensions: 10 ft. 9 in. L x 8 ft. 5 in. W x 12 ft. 10 in. H. (ACN190a).

SOLD

Click here for more information (874.9 KB)
Click here for Additional Information (1,711.9 KB)

Click On Picture

1995 Evapco PMCA Series Evaporative Condenser  685 Nominal Tons

SOLD 1995 Evapco PMCA Series Evaporative Condenser 685 Nominal Tons
Mfg: Evapco Model: PMCA-685
Stock No: HDCF214.73a Serial No: 950632
1995 Evapco PMCA Series Evaporative Condenser 685 Nominal Tons. Model: PMCA-685. S/N: 950632. If used with ammonia the TR is 468 at 96.3°F with a 20° suction and 78°F wet bulb. (2) fans, (1) 20 hp & (1) U.S. Motor, 10 hp, Bell & Gossett Pump7-1/2 hp Special cooler weather features include: split coil circuit designed to cool 40 gpm of 30% ethylene glycol from 100°F to 90°F at 78°F wet bulb. (pressure drop: 9.8 psi.), (2) 6kw electric pan heaters with thermostat and low water cutoff switches, and unit is arranged for remote sump operation. Overall dimensions: 19 ft. 9 in. L x 10 ft. W x 14 ft. H.(AC43a). FAD

SOLD

Click here for more information (961.3 KB)
Click here for Drawings (166.1 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser-15 Ton

SOLD Baltimore Aircoil Company Evaporative Condenser-15 Ton
Mfg: Baltimore Aircoil Company Model: VNC15
Stock No: ACEU845 Serial No: 764435P
Baltimore Aircoil Company Evaporative Condenser-15 Ton. Model: VNC15, S/N: 764435P. Belt: B73. Airflow: 3800 cfm. (192) 1 in. dia. x 2 ft. 3 in. L tubes. Tube construction: galvanized steel. Inlets/outlets: 2 in. drain, 2 in. overflow, 1 in. makeup, (2) 3 in. refrigerant in/out, (2) 17 in. dia. manways. (1) 14 in. dia. Centrifugal fan. Pump motor: 1/3 hp, 3,450 rpm, 208-220/460 V, 1.8/0.9 amps, 60 amps, 3 phase. Pump inlet: 1-1/2 in.; outlet: 1 in. Fan motor: 3 hp. Pulley ratio: 3.2:1. Overall dimensions: 4 ft. L x 4 ft. W x 6 ft. 11 in. H.

SOLD

Click here for more information (150.5 KB)

Click On Picture

1998 Evapco PMCB Series Evaporative Condenser

SOLD 1998 Evapco PMCB Series Evaporative Condenser
Mfg: Evapco Model: PMCB 390
Stock No: pHDRG214.86 Serial No: 988297W
1998 Evapco PMCB Series Evaporative Condenser. Model: PMCB 390. S/N: 988297W. Nominal Capacity: 390 tons. Refrigerant: R-717. At 74°WB and 95° condensing this is rated for 313 tons. Belt No: 2B133. Centrifugal Pump. Impeller diameter: 5-1/2 in. U.S. Electric Motor, 5 hp, 1745 rpm, 208-230/460 V, 15-13.6/6.8 amps, 60 Hz, 3 phase. Fan diameter: 5 ft. U.S. Electric Motor, 15 hp, 1775/1460 rpm, 208-230/460-190/380 V, 40.0-37.0/18.5-46.0/22.5 amps, 60/50 Hz, 3 phase. Driver pulley diameter: 6 in. dia. Driven pulley diameter: 1 ft. 7 in. Pulley ratio: 0.32. Final fan speed: 560.5 rpm. Inlets: (2) 4 in. dia. ports. Outlets: (1) 1-1/2 in. dia. port, (2) 4 in. dia. ports, (1) 2 in. dia. port, (1) 2-1/2 in. dia. port. Overall dimensions: 15 ft. 2 in. L x 10 ft. 10 in. W x 16 ft. 1 in. H. (ACN510).

SOLD

Click here for more information (667.0 KB)

Click On Picture

1996 Evapco PMCB Series Evaporative Condenser330 Nominal Tons

SOLD 1996 Evapco PMCB Series Evaporative Condenser330 Nominal Tons
Mfg: Evapco Model: PMCB-330
Stock No: HDCF215.79 Serial No: 961170
1996 Evapco PMCB series evaporative condenser330 nominal tons. Model: PMCB-330. S/N: 961170. Refrigerant: R-717. TR is 234 at 96.3°F condensing, 20° suction with a 78°F wet bulb. Belt No: 2B-133. Coil test pressure: 350 psig. (1) fan, diameter: 60 in. WEG Motor, 7.5/7.1 hp, 1765/1445 rpm, 208-230/460-380 V, 19.1/9.53-12.1 amps, 60/50 Hz, 3 phase. Scot Motorpump, Model: 58, impeller diameter: 5.50 in. U.S. Motor, 5.00/4.70 hp, 1745 rpm, 208-230/460-190/380 V, 15.00-13.70/6.85-15.30/7.65 amps, 60/50 Hz, 3 phase. Inlets: (2) 4 in. dia. refrigerant ports. Outlets: (2) 4 in. dia. refrigerant ports, (1) 3 in. dia. NPT (drain), (1) 3 in. dia. FNPT (overflow). Overall dimensions: 13 ft. 3 in. L x 10 ft. W x 13 ft. 3-1/2 in. H. (ACN43a). FAD.

SOLD

Click here for more information (656.9 KB)
Click here for Drawings (106.2 KB)

Click On Picture

Evapco (Cimco - Lewis contract) LS Series Evaporative Condenser  100 Nominal Tons

SOLD Evapco (Cimco - Lewis contract) LS Series Evaporative Condenser 100 Nominal Tons
Mfg: Cimco Lewis Refrigeration Model: LCC100
Stock No: HDFD227. Serial No: 61579
Evapco (Cimco-Lewis contract) LS Series evaporative condenser 100 nominal tons. Model: LCC100. S/N: 61579. Refrigerant: R-717. Rated for 71 tons at 96.3°F condensing with 20° suction and 78°F wet bulb. (2) Centrifugal fans. GEC Small Machines Motor, 7.5 hp, 1730 rpm, 575 V, 8.6 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. port (water), (1) 4 in. dia. refrigerant port. This is an Evapco unit built under contract by Cimco Lewis and conforms to Evapco model: LSC100. Outlets: (1) 4 in. dia. port (drain), (1) 4 in. dia. refrigerant port. Overall dimensions: 7 ft. L x 6 ft. W x 10 ft. 11 in. H.(ACN160).

SOLD

Click here for more information (608.3 KB)

Click On Picture

Evapco Two Cell Evaporative Condenser/Fluid Cooler

SOLD Evapco Two Cell Evaporative Condenser/Fluid Cooler
Mfg: Evapco Model: ATW 414 B
Stock No: DEME2760.278a Serial No: 969941W
Evapco Two Cell Evaporative Condenser/Fluid Cooler. Model ATW 414 B, S/N 969941W. Capacity:16.143228 MBH ( ; (3,334 gpm, 95 °F in; 86 °F out; 68 °F WB). Pressure This unit was installed and basically un-used by a plant called Komatsu that was to build wafers for the semiconductor industry that never got into production. It was ordered with stainless coils and was shipped with galvanized coils. Also available are two extra sets of stainless coils were shipped from the factory to fix the problem and are brand new, un-used. Unit with galvanized coils reportedly had very limited use. Overall dimensions: 40 ft. 5-1/2 in. L x 11 ft. 10 in. W x 15 ft. 11-1/8 in. ACN179/376

SOLD

Click here for more information (335.4 KB)

Click On Picture

2000 Un-Used Baltimore Aircoil Company Fluid Cooler / Evaporative Condenser  451 Tons Each

SOLD 2000 Un-Used Baltimore Aircoil Company Fluid Cooler / Evaporative Condenser 451 Tons Each
Mfg: Baltimore Aircoil Company Model: FXV-Q641
Stock No: CPEG001.60 Serial No: U12574801MAD and U12574806MAD
(2) 2000 Baltimore Aircool Company Fluid Cooler/ Evaporative Condensers- 451 Tons each. Model: FXV-Q641. S/N's: U12574801MAD and U12574803MAD. Belt size: 3B115. Number of fans: 2. Fan diameter: 5 ft. 6 in. Driver pulley diameter: 6 in. Driven pulley diameter: 1 ft. 4 in. Pulley ratio: 0.375. U.S. Electric Motor, 30 hp, 1460/1770 rpm, 547/663 rpm (final), 190/380; 208-230/460 V, 87.2/43.6 ; 77.7-71.4/35.7 amps, 50/60 Hz, 3 phase. Baltimore Aircoil Company Centrifugal Pumps, S/Ns: VRM081800I and WRM092000E, BAC P/N: 300563, capacity: 834 gpm @ 17.4 tdh, impeller diameter: 5.80 in. U.S. Motor, 5 hp, 1745 rpm, 208-230/460 V, 15-13.7/6.8 amps, 60 Hz, 3 phase. For Freon 22 they are rated at 451 tons each with a 74°F wet bulb and 105°F condensing. For ammonia they are rated at 365 tons with a 74°F wet bulb and 95°F condensing. As a fluid cooler they are rated for 771 gpm with a 74°F wet bulb and 95°F entering temperature and 85°F leaving temperature. These units feature: high efficiency, low horsepower axial, induced draft fans, combined flow technology which reduces evaporation directly off the coil, minimizing the potential for scaling and fouling, and heat rejection at the lowest possible energy input and maintenance. Inlets: (1) 6 in. dia. refrigerant feed port. Outlets: (1) 3 in. dia. NPT fitting, (1) 2 in. dia. NPT fitting, (1) 6 in. dia. refrigerant discharge port. Overall dimensions: 12 ft. 10 in. L x 12 ft. W x 16 ft. 4 in. H. (ACN580/ea.).

SOLD

Click here for Additional information (261.0 KB)
Click here for more information (1,516.3 KB)

Click On Picture

Evapco Evaporative Condenser

SOLD Evapco Evaporative Condenser
Mfg: Evapco Model: LSCA-120
Stock No: RPCN503. Serial No: 868036 LH
Evapco Evaporative Condenser. Model: LSCA-120. S/N: 868036 LH.

SOLD

Click here for more information (207.1 KB)

Click On Picture

Evapco Evaporative Condenser / Fluid Cooler - 42 Tons

SOLD Evapco Evaporative Condenser / Fluid Cooler - 42 Tons
Mfg: Evapco Model: LSCA-120
Stock No: RPCN502. Serial No: 868035 RH
Evapco Evaporative Condenser / Fluid Cooler. Model: LSC-120. S/N: 868035. This unit features a unique, two circuit coil with a refrigerant circuit original rated capacity of 42 tons for R-22 at 90°F condensing and 78°F wet bulb and a Glycol circuit original rated capacity to cool 26 gpm of a 40% Glycol solution from 100°F to 90°F at 78°F wet bulb. (1) 10 hp. Fan motor. Voltage: 230-460/60/3. This unit was used in a remote sump application and does not include a pump. The LSC model is a centrifugal fan forced draft condenser that is very quiet and ideal for applications where noise is a concern. Centrifugal fans assist in working against static pressure loss caused by ductwork and are suitable for indoors, where it is desirable to conceal the unit or where there are space restrictions. Shipping weight: 6,820 lbs. Overall dimensions: 8 ft. 11-5/8 in. L x 7 ft. 3/8 in. W x 9 ft. 2 in. H. (ACN171a 86).

SOLD

Click here for more information (136.2 KB)
Click here for drawing (467.1 KB)

Click On Picture

1990 Evapco Evaporative Condenser / Fluid Cooler - 42 Ton

SOLD 1990 Evapco Evaporative Condenser / Fluid Cooler - 42 Ton
Mfg: Evapco Model: LSCA-120
Stock No: RPCN501. Serial No: 906489
1990 Evapco Evaporative Condenser / Fluid Cooler. Model: LSCA-120. S/N: 906489. This unit features a unique, two circuit coil with a refrigerant circuit original rated capacity of 42 tons for R-22 at 90ºF condensing and 78ºF wet bulb and a Glycol circuit original rated capacity to cool 26 gpm of Glycol from 100ºF to 90ºF at 78ºF wet bulb. (1) 10 hp. Fan motor. Voltage: 230-460/60/3. All of the coil connection are equipped with copper sweat fittings. This unit was used in a remote sump application and does not include a pump. The LSCA model is a centrifugal fan forced draft condenser that is very quiet and ideal for applications where noise is a concern. Centrifugal fans assist in working against static pressure loss caused by ductwork and are suitable for indoors where it is desirable to conceal the unit or where there are space restrictions. Shipping weight: 5050 lbs. Overall dimensions: 8 ft. 11-1/4 in. L x 5 ft. 3-5/8 in. W x 8 ft. 7 in. H. (ACN171a).

SOLD

Click here for more information (226.0 KB)
Click here for more information (290.6 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser

SOLD Baltimore Aircoil Company Evaporative Condenser
Mfg: Baltimore Aircoil Company Model:
Stock No: HDFD231.56a Serial No:
Baltimore Aircoil Company Evaporative Condenser. Refrigerant: Ammonia. Estimated tonnage: 300. 24 rows of tubes @ total of 576 tubes. (6) Centrifugal fans. Hawker-Siddeley Motor, 10 hp, 1770 rpm, 575 V, 10.4 amps, 60 Hz, 3 phase. Brook-Compton Motor, 10 hp, 1720 rpm, 575 V, 10.4 amps, 60 Hz, 3 phase. Inlets: (2) 4 in. dia. refrigerant ports. Outlets: (2) 2 in. dia. refrigerant ports, (1) 6 in. dia. port (pan drain). Overall dimensions: 12 ft. 2 in. L x 9 ft. 1 in. W x 10 ft. 7 in. H.

SOLD

Click here for more information (398.6 KB)

Click On Picture

Evapco (Cimco - Lewis contract) LS Series Evaporative Condenser  100 Nominal Tons

SOLD Evapco (Cimco - Lewis contract) LS Series Evaporative Condenser 100 Nominal Tons
Mfg: Evapco Model: LCC100
Stock No: HDFD226. Serial No: 61578
Evapco (Cimco-Lewis contract) LS Series evaporative condenser 100 nominal tons. Model: LCC100. S/N: 61578. Refrigerant: R-717. Rated for 71 tons at 96.3°F condensing with 20° suction and 78°F wet bulb. (2) Centrifugal fans. GEC Small Machines Motor, 7.5 hp, 1730 rpm, 575 V, 8.6 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. port (water), (1) 4 in. dia. refrigerant port. This is an Evapco unit built under contract by Cimco Lewis and conforms to Evapco model: LSC100. Outlets: (1) 4 in. dia. port (drain), (1) 4 in. dia. refrigerant port. Overall dimensions: 7 ft. L x 6 ft. W x 10 ft. 11 in. H.(ACN160). FAD

SOLD

Click here for more information (374.4 KB)

Click On Picture

Baltimore Aircoil VC2-Series Evaporative Condenser- 1504 Ton

SOLD Baltimore Aircoil VC2-Series Evaporative Condenser- 1504 Ton
Mfg: Baltimore Aircoil Company Model: VC2-1504
Stock No: DTTC848. Serial No: 95101034
Baltimore Aircoil VC2-Series Evaporative Condenser- 1504 Ton. Model VC2-1504. S/N: 95101034. Belt: 2BP150/3B150. Refrigerant: R-707. Capacity: 13732 MBtuh @ 95 °F condensing temperature and 80 °F entering wet bulb. (2) US Fan Motors, 25 hp, 1765 rpm, 208-230/460 V, 70.0-63.0/31.2 amps, 60 Hz, 3 phase. (2) Baldor Industrial Motors, 15 hp, 1765 rpm, 230/460 V, 36/18 amps, 60 Hz, 3 phase. (2) Baltimore Aircoil Company Centrifugal Pumps, S/N's: SKM0526957 and SKM052695N, capacity (ea): 834 gpm @ 17.4 tdh, impeller diameter: 5.80 in. (2) Baldor Industrial Pump Motors, 5 hp, 1725 rpm, 230/460 V, 13.2/6.6 amps, 60 Hz, 3 phase. VC2-Series Evaporative Condensers are traditional style forced draft evaporative condensers with axial fans to minimize energy consumption. The steel panels and structural elements are constructed of heavy-gauge G-235 hot-dip galvanized steel. Inlets: (2) 6 in. dia. PVC tubes. Outlets: (4) 2 in. dia. ports, (2) 3 in. dia. FNPT. Overall dimensions: 39 ft. 8 in. L x 11 ft. 10 in. W x 9 ft. H. Clean. (SR400).

SOLD

Click here for Inspection Record (314.7 KB)
Click here for more information (422.9 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser  560 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser 560 Tons
Mfg: Baltimore Aircoil Company Model: VXMC-560
Stock No: FSBK01 Serial No: 86-1693
Baltimore Aircoil Company Evaporative Condenser. Model: VXMC-560. S/N: 86-1693. Rated capacity for R-22: 560 tons at 105ºF condensing, 40ºF suction. and 78ºF wet bulb. Rated capacity for R-717: 397 tons at 96.3ºF condensing, 20ºF suction and 78ºF wet bulb. Air flow: 95,700 cfm. Fans: (1) 7.5 hp and (1) 15 hp. The coil is designed for low pressure drop with sloping tubes for free drainage of the condensed refrigerant. All structural elements, steel panels and coil are hot-dip galvanized. Water distribution system consists of a galvanized header and sch. 40 PVC spray branches with large diameter, non-clog, plastic spray nozzles which can be removed from rubber grommet for cleaning. This unit has two-stage axial-flow fans and a close-coupled, bronze-fitted, centrifugal pump with a mechanical seal. Approximate shipping weight: 23,360 lbs.. Overall Dimensions: 19 ft. 10-1/8 in. L x 9 ft. 10-1/8 in. W x 14 ft. 3/4 in. H. (ACN550-86).

SOLD

Click here for more information (1,694.6 KB)
Click here for additional information (198.7 KB)

Click On Picture

2001 Evapco PMCB Series Evaporative Condenser  1770 Tons

SOLD 2001 Evapco PMCB Series Evaporative Condenser 1770 Tons
Mfg: Evapco Model: PMCB-1770
Stock No: RBFM880.140 Serial No: M015884
2001 Evapco PMCB Series Evaporative Condenser. Model: PMCB-1770. S/N: M015884. Nominal capacities: 1770 tons of R-22 at 105°F condensing and 74°F wet bulb, and 1239 tons of R-717 at 95ºF Condensing and 74ºF Wet bulb. Features hot-dipped, galvanized steel construction with a 304 stainless steel removable strainer. (6) two stage, vane-axial fans. Fan motors: (2) 30 hp and (2) 15 hp, totally enclosed, 460/60/3. Water pump: (2) 7-1/2 hp, close-coupled centrifugal pumps with mechanical seals. The PMCB is a forced draft axial fan, counter flow condenser for industrial refrigeration installations. This unit contains Evapcos Thermal-Pak design coil with sloping tubes for liquid drainage, and staggered, elliptical tubes aligned in the direction of airflow to obtain a high heat exchange coefficient. Approximate shipping weight: 70,300 lbs. Approximate operating weight: 91,000 lbs. Overall dimensions: 39 ft. 7-3/4 in. L x 11 ft 10-1/2 in. W x 15 ft. 7-3/4 in. W. (ACN1500).

SOLD

Click here for drawings and specs (118.0 KB)
Click here for more information (408.9 KB)

Click On Picture

2001 Evapco PMCB Series Evaporative Condenser - 1770 Tons

SOLD 2001 Evapco PMCB Series Evaporative Condenser - 1770 Tons
Mfg: Evapco Model: PMCB-1770
Stock No: RBFM881.140 Serial No: M015885
2001 Evapco PMCB Series Evaporative Condenser. Model: PMCB-1770. S/N: M015885. Nominal capacities: 1770 tons of R-22 at 105°F condensing and 74°F wet bulb, and 1239 tons of R-717 at 95º;F Condensing and 74ºF Wet bulb. Features hot-dipped, galvanized steel construction with a 304 stainless steel removable strainer. (6) two stage, vane-axial fans. Fan motors: (2) 30 hp and (2) 15 hp, totally enclosed, 460/60/3. Water pump: (2) 7-1/2 hp, close-coupled centrifugal pumps with mechanical seals. The PMCB is a forced draft axial fan, counter flow condenser for industrial refrigeration installations. This unit contains Evapcos Thermal-Pak design coil with sloping tubes for liquid drainage, and staggered, elliptical tubes aligned in the direction of airflow to obtain a high heat exchange coefficient. Approximate shipping weight: 70,300 lbs. Approximate operating weight: 91,000 lbs. Overall dimensions: 39 ft. 7-3/4 in. L x 11 ft 10-1/2 in. W x 15 ft. 7-3/4 in. W. (ACN1500)

SOLD

Click here for more information (427.5 KB)
Click here for drawings and specifications (118.0 KB)

Click On Picture

2001 Evapco PMCB Series Evaporative Condenser  1770 Tons

SOLD 2001 Evapco PMCB Series Evaporative Condenser 1770 Tons
Mfg: Evapco Model: PMCB-1770
Stock No: RBFM882.170 Serial No: M015887
2001 Evapco PMCB Series Evaporative Condenser. Model: PMCB-1770. S/N: M015887. Nominal capacities: 1770 tons of R-22 at 105°F condensing and 74°F wet bulb, and 1239 tons of R-717 at 95ºF Condensing and 74ºF Wet bulb. Features hot-dipped, galvanized steel construction with a 304 stainless steel removable strainer. (6) two stage, vane-axial fans. Fan motors: (2) 30 hp and (2) 15 hp, totally enclosed, 460/60/3. Water pump: (2) 7-1/2 hp, close-coupled centrifugal pumps with mechanical seals. The PMCB is a forced draft axial fan, counter flow condenser for industrial refrigeration installations. This unit contains Evapcos Thermal-Pak design coil with sloping tubes for liquid drainage, and staggered, elliptical tubes aligned in the direction of airflow to obtain a high heat exchange coefficient. Approximate shipping weight: 70,300 lbs. Approximate operating weight: 91,000 lbs. Overall dimensions: 39 ft. 7-3/4 in. L x 11 ft 10-1/2 in. W x 15 ft. 7-3/4 in. W. (ACN1500)

SOLD

Click here for more information (384.0 KB)
Click here for drawings and specifications (118.0 KB)

Click On Picture

Evapco Evaporative Condenser  920 Ton

SOLD Evapco Evaporative Condenser 920 Ton
Mfg: Evapco Model: PMC-920N
Stock No: DTTC854. Serial No: 879223RH
Evapco Evaporative Condenser. Model: PMC-920N. Nominal capacity: 920 Tons of R-22 at 105ºF condensing temperature, 40ºF suction temperature, and 78ºF wet bulb temperature. R-717 (ammonia) capacity rating: 653 tons at 96.3ºF condensing temperature, 20ºF suction temperature and 78ºF wet bulb temperature. Stainless steel mist eliminators. Overall dimensions: 39 ft. 1 in. L x 9 ft. 11-3/4 in. W x 13 ft. 9-1/2 in. H.(ACN1011-87).

SOLD

Click here for drawing (376.6 KB)
Click here for more information (223.9 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condensers  285 Ton

SOLD Baltimore Aircoil Company Evaporative Condensers 285 Ton
Mfg: Baltimore Aircoil Company Model: VXMCN570
Stock No: 125.Rd0063 Serial No: 830805P
Baltimore Aircoil Company Evaporative Condensers. Model: VXMCN570. Rated capacity: 285 tons using R-22 at 105ºF condensing, 40ºF suction, and 78ºF wet bulb and 205 tons using R-717 at 96.3ºF condensing, 20ºF suction and 78ºF wet bulb. Uniquely designed as side by side, connected units, these are capable of being divided operationally into individual units, each with one fan and coil section. We are offering one of these units for sale. As single, axial fans are located on the ends and not on the sides of each unit, they can be placed closed to walls or set-backs for narrow, space limiting applications. Overall dimensions: 22 ft. 3 in. L x 7 ft. 3 in. W x 13ft. H. (ACN255-83).

SOLD

Click here for more information (128.3 KB)
Click here for Drawings (56.9 KB)

Click On Picture

BAC Evaporative Condenser  400 Ton

SOLD BAC Evaporative Condenser 400 Ton
Mfg: Baltimore Aircoil Company Model:
Stock No: MDFC048 Serial No:
BAC Evaporative Condenser 400 Ton

SOLD

Click here for more information (44.9 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser - 150 tons

SOLD Baltimore Aircoil Company Evaporative Condenser - 150 tons
Mfg: Baltimore Aircoil Company Model: VXMC150
Stock No: BNCA173B Serial No: 81-9263P
Baltimore Aircoil Company Evaporative Condenser - 150 tons. Model: VXMC150. Nominal rated capacity: 150 tons using R-22 at 105ºF condensing, 40ºF suction, and 78ºF wet bulb. 106 tons using R-717 at 96.3ºF condensing, 20ºF suction and 78ºF wet bulb. The VXMC series feature an axial fan, forced draft design. Manhole diameter: 1 ft. 10 in. Number of fans: 2. Fan diameter: 4 ft. 7 in. Fan motor: (1) 7-1/2 hp. Overall dimensions: 14 ft. 7 in. L x 5 ft. 8 in. W x 11 ft. 4 in. H.(ACN200-81).

SOLD

Click here for drawing (139.3 KB)
Click here for more information (566.4 KB)

Click On Picture

Reco Evaporative Condensing Tower  625 Tons

SOLD Reco Evaporative Condensing Tower 625 Tons
Mfg: Reco Model: RA-919E
Stock No: KWBF213 Serial No: 879999
Reco Evaporative Condensing Tower. Model: RA-919E. Nominal rated capacity: 625 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures. 450 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Number of axial fans: 3. (2) Fan motors: Magnetek electric motor: 10 HP, centrifugal pump. Model: 5G, Baldor Electric pump motor: 7.5 HP. Inlets: (2) 1 ft. 8 in. manway ports, (1) 6 in. dia. port, (2) 4 in. dia. ports, (1) 2 in. dia. ports. Outlets: (1) 6 in. dia. port, (2) 4 in. dia. ports, (2) 3 in. dia. ports. Overall dimensions: 21 ft. 2 in. L x 10 ft. W x 17 ft. 2 in. H.

SOLD

Click here for more information (494.4 KB)

Click On Picture

1996 Evapco Evaporative Condenser  1,018 Tons

SOLD 1996 Evapco Evaporative Condenser 1,018 Tons
Mfg: Evapco Model: PMCB-1018
Stock No: RGMB115A Serial No: 962225
1996 Evapco Evaporative Condenser. Model: PMCB-1018. SN: 962225. Refrigerant: last used with R-717 (Ammonia). Nominal capacities: 1,018 tons using R-22 @ 40 F suction, 78 F wet bulb, and 105F condensing temperature, and 733 tons using R-717 @ 20F suction, 78F wet bulb, and 96.3F condensing temperature. Coil test pressure: 350 psig. Number of axial fans: 4. Fan diameter: 5 ft. U.S. fan motor: 20 hp, 1765 rpm, 208-230/460 V, 55.9-49.6/24.8 amps, 60 Hz. 3 phase. Belt No: 2BX128. Approximate shipping weight: 17,825 lbs. Heaviest section (2): 6,870 lbs. Inlets: (4) 4 in. dia. ports, (1) 8 in. dia. port. (2) 1 ft. 9 in. manholes. Outlets: (4) 4 in. dia. ports. Overall dimensions: 28 ft. L x 11 ft. 11 in. W x 15 ft. 8 in. H.(ACN1157).

SOLD

Click here for drawing (37.1 KB)
Click here for more information (377.3 KB)

Click On Picture

Baltimore Aircoil Company Series V Evaporative Condenser C2000 Multi-stage Axial Fan Model  65.5 Tons

SOLD Baltimore Aircoil Company Series V Evaporative Condenser C2000 Multi-stage Axial Fan Model 65.5 Tons
Mfg: Baltimore Aircoil Company Model: C2733H
Stock No: HDFD224. Serial No: 88-10185
Baltimore Aircoil Company Series V Evaporative Condenser C2000 Multi-stage Axial Fan Model 65.5 Tons. Model: C2733H. S/N: 88-10185. Refrigerant: R-717. Rated for 65.5 tons at 96.3F condensing, 20 degree suction and 76F wet bulb. (1) 5hp fan motor, 1800 rpm, 230/460, 60 Hz 3 phase, 480V. As a sturdy counter flow, blow-through design , the C2000 models feature steel panels and structural members made of G210 hot-dip galvanized steel with a plated Zinc Chromatized Aluminum finish. Access doors are held in place by phenolic knobs that deter rust and allow for easy entry. Overall dimensions: 4 ft. 7 in. L x 5 ft. 4 in. W. x 11 ft. 8 in. H.

SOLD

Click here for more information (630.5 KB)

Click On Picture

Evapco Evaporative Condenser - 175 Tons

SOLD Evapco Evaporative Condenser - 175 Tons
Mfg: Evapco Model: PMCB-175
Stock No: BDBS06 Serial No: T020521
Evapco Evaporative Condenser. Model: PMCB-175. Nominal rated capacity: 175 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures. 125 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Coil test pressure: 400 psig. Forced draft design with axial fans. Number of axial fans: 2. Fan diameter: 3 ft. 8 in. Fan motor: 7.5 hp, 3 Phase. Pump: 5.25 impeller diameter, 2 hp, 3/60/200-230/460V. Motor: 2.0 hp, 208-230/460V, 3 Phase. Inlet: (1) 2 in. dia. port, (2) 4 in. dia. port. (2) 1 ft. 8 in dia. port, (2) in. dia. port. Outlet: (2) 2 in. dia. port. (2) 4 in. Overall dimensions: 13 ft. 5 in. L x 6 ft. 5 in. W x 11 ft. 1 in. H. (ACN271).

SOLD

Click here for more information (223.1 KB)

Click On Picture

1998 Evapco Evaporator Condenser  420 Nominal Tons

SOLD 1998 Evapco Evaporator Condenser 420 Nominal Tons
Mfg: Evapco Model: ATC-420
Stock No: pGKD209.100 Serial No: 985704M
Evapco Evaporator Condenser. Model: ATC-420. S/N: 985704M. 350 psi coil pressure, belt 6B-148.Nominal capacity: 420 tons using R-22 at 40F suction, 105F condensing and 78F wet bulb. Rated at 302 tons using R-717 at 20F suction, 96.3F condensing and 78F wet bulb. Approximate overall dimensions: 14 ft. L x 8 ft. 6 in. W x 13 ft. H.

SOLD

Click here for more information (70.3 KB)

Click On Picture

1999 Imeco Evaporative Condenser / Fluid Cooler  340 Tons

SOLD 1999 Imeco Evaporative Condenser / Fluid Cooler 340 Tons
Mfg: Imeco Model: XLC - 680
Stock No: MDBC265 Serial No: 24023-1-LH
1999 Imeco Evaporative Condenser / Fluid Cooler. Model: XLC - 680. Rated nominal capacity: 340 tons using R-22 at 40F suction, 78F wet bulb, and 105F condensing conditions, and 245 tons using R-717 at 20F suction, 78F wet bulb, and 96.3F condensing conditions. Fluid cooler capacity: 80 gpm using 50% ethylene glycol with a 95F entering temperature, 85F leaving temperature and a 3.55 psi pressure drop. Inlets: (3) 4 in port. Outlets: (2) 4 in. port, (2) in. pipe, (1) 6 in. FNPT, (1) 6 in. port. Overall dimensions: 14 ft. 9 in. L x 10 ft. 5-1/2 in. W x 8 ft. 10-7/8 in. H.(ACN495).(BE).

SOLD

Click here for specifications (123.9 KB)
Click here for drawing (55.1 KB)
Click here for more information (550.9 KB)

Click On Picture

2004 Baltimore Aircoil Company Evaporative Condenser  451 Tons

SOLD 2004 Baltimore Aircoil Company Evaporative Condenser 451 Tons
Mfg: BAC Model: VC2-451
Stock No: MDFC047.100 Serial No: U041606901
2004 Baltimore Aircoil Company Evaporative Condenser. Model: VC2-451. Rated nominal capacities: 451 tons using R-22 at 40F suction, 78F wet bulb, and 105F condensing temperatures, and 320 tons using R-717 at 20F suction, 78F wet bulb, and 96.3F condensing temperatures. Number of centrifugal fans: 2. Fan diameter: 5 ft. 4 in. Fan motor: 25 hp, 3 phase. Inlets: (2) 1 ft. 8 in. manways, (1) 6 in. dia. port, (2) 4 in. dia. port. Outlets: (1) 6 in. dia. port, (2) 4 in. dia. ports. Overall dimensions: 13 ft. 4 in. L x 11ft. 10 in. W. x 14ft. 5 in. H.(ACN530). (BH)

SOLD

Click here for more information (510.5 KB)

Click On Picture

1992 Imeco Evaporative Condenser - 57 Tons

SOLD 1992 Imeco Evaporative Condenser - 57 Tons
Mfg: Imeco Model: XLC85
Stock No: HDFD229. Serial No: 190-21
1992 Imeco Evaporative Condenser. Model: XLC85. S/N: 190-21. Refrigerant: R717. Capacity: 57 tons. Wet Bulb Temp: 78.0 F. Condenser Temp: 95.0 F. Condenser Pressure 181.0 psig. The XLC condenser is recommended in situations where close control of condensing pressure is desired. This model offers quiet-operating centrifugal fans as well as optional capacity control dampers. Overall Dimensions: 10ft. 2in. L x 10ft. W x 8 ft. 11 in. H. (ACN139-92).

SOLD

Click here for more information (312.9 KB)
Click here for Additional Information (525.6 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser - 200 tons

SOLD Baltimore Aircoil Company Evaporative Condenser - 200 tons
Mfg: Baltimore Aircoil Company Model: CPA-200A
Stock No: BNCA217 Serial No: 66-1604
Baltimore Aircoil Company Evaporative Condenser. Model: CPA-200A. Nominal rated capacity: 200 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures. 145 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Fans: (4) 3 ft. dia. Displacement: 57,000 cfm. (2) Lincoln electric motors, 5 hp. Overall dimensions: 13 ft.10 in. L x 9 ft. W x 9 ft. 4 in. H.(ACN280).

SOLD

Click here for more information (440.1 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser  200 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser 200 Tons
Mfg: Baltimore Aircoil Company Model: CPA-200A
Stock No: BNCA217B Serial No: 66-1603
Baltimore Aircoil Company Evaporative Condenser. Model: CPA-200A. Nominal rated capacity: 200 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures. 145 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Fans: (4) 3 ft. dia. Displacement: 57,000 cfm. (2) Lincoln electric motors, 5 hp. Overall dimensions: 13 ft. 2 in. L x 10 ft. W x 9 ft. 5 in. H.(ACN280) (BH).

SOLD

Click here for specifications (75.8 KB)
Click here for more information (279.8 KB)

Click On Picture

1998 Evapco PMCB Series Evaporative Condenser- 585 Nominal Tons

SOLD 1998 Evapco PMCB Series Evaporative Condenser- 585 Nominal Tons
Mfg: Evapco Model: PMCB-585
Stock No: DTTC2003. Serial No: 985901M-3M
1998 Evapco PMCB Series Evaporative Condenser. Model: PMCB-585. Rated nominal capacities: 585 tons using R-22 at 40F suction, 78F wet bulb, and 105F condensing conditions, and 415 tons using R-717 at 20F suction, 78F wet bulb, and 96.3F condensing conditions. Number of centrifugal fans: 3. Coil test pressure: 350 psig. Baldor super E fan motor: 10hp, 3 phase. U.S. fan motor: 5 hp, 3 phase. Bell and Gossett pump: Model: 5A 6-5/8 BF. Motor: 7.5 hp, 3 phase. Originally installed with Tropicana, this PMCB model offers cast aluminum fans and features Evapco's Thermal-Pak coil and a non-clogging, PVC drift eliminator and water distribution system. Inlets: (2) 1 ft. 8 in. manways, (2) 4 dia. ports, (1) 6 dia. port, (1) 2 dia. port. Outlets: (2) 4 dia. ports, (1) 6 dia. port, (2) 3 dia. ports, (2) 1 ft. 8 in. manways. Overall dimensions: 19 ft. 7 in. L x 9 ft. 9 in. W x 14 ft. H.(ACN750)(BH).

SOLD

Click here for more information (740.9 KB)
Click here for more drawings / specifications (1,348.3 KB)

Click On Picture

1998 Imeco Evaporative Condenser- 535 Nominal Tons

SOLD 1998 Imeco Evaporative Condenser- 535 Nominal Tons
Mfg: Imeco Model: XLP-XL 535
Stock No: ASAC005. Serial No: 395211 LH
1998 Imeco Evaporative Condenser. Model: XLP-XL 535. Belt: B140. Rated at 535 tons using Freon under nominal conditions, 40F suction, 78F wet bulb, and 105F condensing temperatures. Rating for R-717: 385 tons at 20F suction, 78F wet bulb, and 96.3 F condensing temperatures. Rating Maximum pressure: 250 psi. (3) 62 in. dia. fans. Fan Motor, 10 and 4.4 hp, 460 V, 13.1/7.5 amps. Fan Motor, 5 and 2.2 hp, 460 V, 7.1/4.8 FLA. Inlets/outlets: (2) 4 in. dia. ports (media). Overall dimensions: 20 ft. L x 12 ft. W x 16 ft. H. (ACN683).

SOLD

Click here for more information (884.2 KB)
Click here for Drawings (185.3 KB)

Click On Picture

Evapco Evaporative Condenser  35 Tons

SOLD Evapco Evaporative Condenser 35 Tons
Mfg: Evapco Model: LSC-35
Stock No: RPCN441C Serial No: 857513 LH
Evapco Evaporative Condenser - 35 Tons. Model: LSC-35. Nominal capacity: 35 tons with R-22 at 105F condensing, 40F suction, and 78F wet bulb. Capacity with ammonia: 25 tons with R-717 at 96.3F condensing, 20F suction, and 78F wet bulb. This unit was used in a remote sump application and does not include a pump or plastic eliminators. The LSC model is a centrifugal fan, forced draft condenser that is very quiet and ideal for applications where noise is a concern. The centrifugal fans counteract static pressure loss due to ductwork making these units suitable for installations indoors where it is desirable to hide the unit, or when this is the only space available. Left Hand Unit. Overall dimensions: 6 ft. 7 in. L x 4 ft. 11 in. W x 7 ft. 6 in. H. (ACN96-86)(BE).

SOLD

Click here for drawing (417.4 KB)
Click here for more information (313.2 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser

SOLD Baltimore Aircoil Company Evaporative Condenser
Mfg: Baltimore Aircoil Company Model: Possibly VC2 Series
Stock No: KWBF214.20 Serial No:
Baltimore Aircoil Company Evaporative Condenser. Model: Possibly VC2 Series. Belt no: B108. Number of (axial) fans: 2. Fan diameter: 54 in. U.S. electric motor: 5 hp. Berkeley centrifugal pump, Model: B3ZPMS. Marathon electric motor: 5 hp. Inlets: (2) 1 ft. 10.25 in. manways, (3) 4 in. dia. ports, (1) 1 in. dia. port. Outlets: (3) 4 in. dia. ports, (1) 1-1/2 in. dia. port. Overall dimensions: 13 ft. 9 in. L x 9 ft. 7 in. W x 14 ft. 6-1/2 in. H.

SOLD

Click here for more information (586.2 KB)

Click On Picture

1998 Evapco PMCB Series Evaporative Condenser - 585 Tons

SOLD 1998 Evapco PMCB Series Evaporative Condenser - 585 Tons
Mfg: Evapco Model: PMCB-585
Stock No: DTTC2004 Serial No: 986357M-3M
1998 Evapco PMCB Series Evaporative Condenser. Model: PMCB-585. Rated capacities: 585 tons using R-22 at 40F suction, 78F wet bulb, and 105F condensing temperatures, and 415 tons using R-717 at 20F suction, 78F wet bulb, and 96.3F condensing temperatures. (3) fans, (1) 10 H.P. fan motor 460/60/3 and (1) Baldor motor, 5 hp, 1750 rpm, 230/460 V, 13/6.5 amps, 60 Hz, 3 phase. (1) Bell Gossett pump model: 5A 65/8 FF, S/N: 2087291 0, with Baldor motor, 7.5 hp, 1755 rpm, 208-230/460 V, 23.5-21.8/10.9 amps, 60Hz, 3 phase. Originally installed with Tropicana, this PMCB model offers cast aluminum fans and features Evapco's Thermal-Pak coil and a non-clogging, galvanized drift eliminator and water distribution system. Approximate overall dimensions: 20 ft. L. x 10 ft. W. x 13 ft. 7 in.(ACN750)(BH).

SOLD

Click here for drawings and additional information (1,348.3 KB)
Click here for more information (1,097.4 KB)

Click On Picture

2002 Imeco / York XLP Series Evaporative Condenser - 870 Tons

SOLD 2002 Imeco / York XLP Series Evaporative Condenser - 870 Tons
Mfg: Imeco Model: XLP-XL870 RH
Stock No: RGMP285.100 Serial No: 33050/100
2002 Imeco / York XLP Series Evaporative Condenser. Model: XLP-XL870 RH. Rated capacities: 870 tons with R-22 at 105F condensing, 40F suction and 78F wet bulb and 617 tons with R-717 at 96.3F condensing, 20F suction, and 78F wet bulb. Design pressure: 300 PSIG. (3) two-stage, axial flow fans: fan diameter: 5 ft. 4 in. dia. Air flow: 152,000 cfm. (2) Baldor motors, 30 hp, 1760 rpm, 460 V, 36 amps, 60 Hz, 3 phase. Baldor motor: 15 hp, 1760 rpm, 460 V, 19.2 amps, 60 Hz, 3 phase. XLP evaporative condensers are ideal for unrestricted, open installations which do not require external static pressure capability, extra low sound levels or condensing pressure controls that are more accurate than those provided by fan cycling. Coil, fan casing and pan sections are hot dip galvanized after fabrication to provide the most effective protection against corrosion. (1) manway, dimensions: 1 ft. 11 in. dia. Inlets: (2) 6 in. pipe, (1) 6 in. pipe, (2) 2 in. MNPT, (2) 1 in. FNPT. Outlets: (2) 4 in. dia. pipe, (2) in. dia. pipe, (1) 4 in. FNPT (drain), (1) 2 in. dia. drain pipe, (1) 1 in. dia. drain hole, (1) 12 in. dia. floor drain. Overall dimensions: 22 ft. 6 in. L x 12 ft. W x 15 ft. 4 in. H.(ACN1227a)(BI).

SOLD

Click here for more information (2,110.3 KB)

Click On Picture

Evapco Evaporative Condenser - 35 Tons

SOLD Evapco Evaporative Condenser - 35 Tons
Mfg: Evapco Model: LSC-35
Stock No: RPCN441D. Serial No: 813500 LH
Evapco Evaporative Condenser. Model: LSC-35. Nominal capacity: 35 tons using R-22 at 40F suction, 105F condensing and 78F wet bulb. Rated at 25 tons using R-717 at 20F suction, 96.3F condensing and 78F wet bulb. This unit was used in a remote sump application and does not include a pump. The LSC model is a centrifugal fan, forced draft condenser that is quiet and ideal for applications where noise is a concern. The centrifugal fans counteract static pressure loss related to ductwork making these units suitable for installations indoors where it is desirable to hide the unit, or when this is the only space available. Copper sweat fittings have been removed. Left hand unit. Overall dimensions: 6 ft. 7 in. L x 4 ft. 11 in. W x 7 ft. 6 in. H.(ACN96-81).

SOLD

Click here for more information (452.3 KB)
Click here for drawing (419.6 KB)

Click On Picture

Evapco PMCA-Series Evaporative Condenser-  625 Tons

SOLD Evapco PMCA-Series Evaporative Condenser- 625 Tons
Mfg: Evapco Model: PMCA-625
Stock No: DTTC864. Serial No: 870118
Evapco PMCA-Series Evaporative Condenser. Model: PMCA-625. Rated capacities: 625 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures, or 450 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Coil test pressure: 350 psig. (3) 60 in. dia. fans. U.S. Motor, 10 hp, 1760 rpm, 230/460 V, 24.6/21.3 amps, 60 Hz, 3 phase. Motor, 20 hp, 230/460 V, 60 Hz, 3 phase. (2) manways: 1 ft. 8 in. dia. Inlet: (1) 4 in. dia. port, (1) 6 in. dia. port. Outlets: (2) 4 in. dia. port, (3) 2 in. dia. ports, (1) 6 in. flanged port. Overall dimensions: 19 ft. 8 in. x 9 ft. 8 in. x 13 ft. 3 in. H.(ACN880-87).

SOLD

Click here for more information (400.0 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser - 165 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser - 165 Tons
Mfg: Baltimore Aircoil Company Model: VC1-165
Stock No: RYDV187.10 Serial No:
Baltimore Aircoil Company Evaporative Condenser. Model: VC1-165. Capacity: 165 tons using R-22 at 105F condensing, 40F suction and 78F wet bulb temperatures or 117 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Airflow: 27,200 cfm. Coil volume: 23 ft. (1) 10 hp fan motor. (1) 1-1/2 hp fan motor. Approximate overall dimensions: 13 ft. 3 in. L x 4 ft. 9 in. W x 10 ft. 9 in. H.(IN-VA).

SOLD

Click here for more information (43.1 KB)
Click here for more information (43.8 KB)

Click On Picture

Baltimore Aircoil Co. Evaporative Condenser

SOLD Baltimore Aircoil Co. Evaporative Condenser
Mfg: Baltimore Aircoil Company Model: C16440
Stock No: TMCB312.15 Serial No:
Baltimore Aircoil Co. Evaporative Condenser. Model: C16440.

SOLD

Click here for more information (48.4 KB)

Click On Picture

2000 Un-Used Stainless Steel Evapco Fluid Cooler / Evaporative Condenser-827 Tons

SOLD 2000 Un-Used Stainless Steel Evapco Fluid Cooler / Evaporative Condenser-827 Tons
Mfg: Evapco Model: ATW-207C
Stock No: JDWW001 Serial No: T000388 / T002095
(2) 2000 Un-Used Stainless Steel Evapco ATW Series Fluid Cooler/Evaporative Condenser- 827 Nominal Tons. Model ATW 207C. S/N: T000388 / T002095. This unit was installed but never commissioned at Global Crossing / WorldComs headquarters building near Boston, Massachusetts. For Freon 22 it is rated at 827 tons with a 74F wet bulb and 105 F condensing. For ammonia it is rated at 587 tons with a 74F wet bulb and 95F condensing. As a fluid cooler it is rated for 383 gpm with a 74F wet bulb and 95F entering temperature and 85F leaving temperature. The galvanized coils feature both extended surface coils and Therma-Pak, elliptical coils. For many of the cooler months the extended surface coils can be used for dry operation. (2) speed US electric motor, 40/10 hp, 1780/890 rpm, 460 V, 58.8/22 amps, 60 Hz, 3 phase. (1) Access door: 4 ft. 11 in. L X 2 ft.. 9-1/2 in. H. Inlets: (2) 4 in. diameter flanged port. Outlets: (2) 4 in. diameter flanged port, (1) 6 in. diamaeter pvc pipe. Overall dimensions: 19 ft. 8 in. L x 11 ft. 10 in. W x 9ft. 8 in. H. Cost new was just less than $150,000 each. (BJ & BI).

SOLD

Click here for Evapco Drawings (446.1 KB)
Click here for more information (1,970.8 KB)

Click On Picture

Baltimore Air Coil Evaporative Condenser  1000 Tons

SOLD Baltimore Air Coil Evaporative Condenser 1000 Tons
Mfg: Baltimore Aircoil Company Model: VLC-1000
Stock No: HMFM01 Serial No: 69-2092
Baltimore Air Coil Evaporative Condenser. Model: VLC-1000. Approximate capacity: 1000 tons using R-22 at 105F condensing, 40F suction, and 78F wet bulb or 720 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb. (4) fan motors. (8) 1 ft. 8 in. dia. fans. (1) 450 gpm Paco pump. Installation and engineering advantages offered include air entry access on both sides of the unit and slow speed centrifugal fans providing for quiet operations, thus making the VLC model suitable for noise sensitive applications. Inlets: (2) 4 in. refrigerant port, (1) 1 in. water make up port. Outlets: (2) 3 in. dia refrigerant port, (1) 2 in. dia. FNPT drain port, (1) 1 in. dia. overflow port, (2) in. dia. port. Overall dimensions: 20 ft. 5 in. L x 9 ft. 4 in. W x 10 ft. 7 in. H.(ACNxxx-79).(BF).

SOLD

Click here for more information (625.2 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser  772 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser 772 Tons
Mfg: Baltimore Aircoil Company Model: VC1-772
Stock No: TMCB314.81 Serial No:
Baltimore Aircoil Company Evaporative Condenser. Model: VC1-772. Capacity: 772 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures or 525 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Airflow: 148,500 cfm. Coil volume: 98 ft. (2) 30 hp fan motors. (2) 5 hp fan motors. Shipping weight: 31560 lbs. Approximate overall dimensions: 27 ft. 7 in. L x 11 ft. 8 in. W x 12 ft. 11 in. H.(ACN960).

SOLD

Click On Picture

Recold MW-Series Closed Circuit Fluid Cooler- 18 Tons

SOLD Recold MW-Series Closed Circuit Fluid Cooler- 18 Tons
Mfg: Recold Model: MLW-18B
Stock No: ASCS245.35a Serial No: 01708
Recold MW-Series Closed Circuit Fluid Cooler- 18 Tons. Model: MWL-18B. Capacity min/max: 25-100 gpm. Coil volume: 42 gal. Airflow: 12,300 cfm. Tube Construction: Copper. Leeson fan motor, 5 hp, 1750 rpm, 208-230/460 V, 13.8-13/6.5 amps, 60 Hz, 3 phase. The MW-series is an induced draft, counter flow design fluid cooler. Recold Centrifugal Pump, impeller diameter: 3.38 in., (2) 1-1/2 in. female npt fittings. Motor, 1 hp, 3500 rpm, 208-230/460v, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. copper tubing (media). Outlets: (1) 3 in. dia. copper tubing (media). Overall dimensions: 5 ft. 2 in. L x 4 ft. 2 in. W x 9 ft. 2 in. H.(ACN205).(BE).

SOLD

Click here for more information (264.4 KB)

Click On Picture

Reco Evaporative Condensing Tower  1165 Tons

SOLD Reco Evaporative Condensing Tower 1165 Tons
Mfg: Reco Model: RA-1712
Stock No: KWBF212 Serial No: 791840
Reco Evaporative Condensing Tower. Model: RA-1712. Rated capacity: 1165 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures. 839 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Coil pressure: 350 psi. Number of axial fans: 6. Fan diameter: 5 ft. (4) fan motors: U.S. electric motors: 20 HP, 3 phase. (2) Centrifugal pump. Model: 600, (2) Marathon electric pump motors: 3 phase. Inlets: (2) 1 ft. 8 in. manway ports, (6) 4 in. dia. ports, (2) 2 in. dia. ports. Outlets: (6) 4 in. dia. ports. Overall dimensions: 39 ft. 8 in. L x 11 Ft. W x 20 ft. H.(BH).

SOLD

Click here for more information (839.0 KB)

Click On Picture

Evapco Evaporative Condenser  900 Tons

SOLD Evapco Evaporative Condenser 900 Tons
Mfg: Evapco Model: PMCA-900
Stock No: KWBF001 Serial No: 893470
Evapco Evaporative Condenser. Model: PMCA-900. Nominal capacity: 900 tons using R-22 with a 105F condensing temperature, 40F suction temperature and a 78F wet bulb temperature, and 638 tons with R-717 with a 96.3F condensing temperature, 20F suction temperature, and a 78F wet bulb temperature. (4) Axial fans, 5 ft. diameter. Fan displacement: 141,400 cfm. Belt no: 2B-133. (2) U.S. Electrical fan motors, 20 hp, 1770 rpm, 208-230/460V. Inlets: (2) 1 ft. 8 in. man ways, (2) 6 in. dia. port. (4) 4 in. dia. ports, (1) 3 in. dia. port. Outlets: (4) 4 in. dia. port, (1) 3 in. dia. port. Overall dimension: 27 ft. 10 in L x 10 ft. W x 13 ft. 7 in. H.(ACN890).

SOLD

Click here for more information (397.6 KB)
Click here for specifications (713.9 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser  752 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser 752 Tons
Mfg: Baltimore Aircoil Company Model: VC2-752
Stock No: RGMP286.60 Serial No: 96100818
Baltimore Aircoil Company Evaporative Condenser. Model: VC2-752. Rated capacities: 752 tons using R-22 at 105F condensing, 40F suction, and 78F wet bulb temperatures and 534 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb. Fan motors: (1) US motor, 25 hp, 1765 rpm, 208-230/460 V, 70-63/31.5 amps, 60 Hz, 3 phase. (1) US motor, 15 hp, 1765 rpm, 208-230/460 V, 48/24 amps, 60 Hz, 3 phase. The VC2 series is a forced draft evaporative condenser with axial fans and a single, side air inlet. (2) manways 1 ft. 8 in. diameter. Inlets: (2) 6 in. dia. port. Outlet: (2) 3 in. dia. port, (2) in. dia. pipe. Overall dimensions: 18 ft. L x 12 ft. W x 15 ft. 4 in. H.(ACN815a)(BI).

SOLD

Click here for more information (1,471.0 KB)
Click here for drawing (77.2 KB)

Click On Picture

1999 Imeco Evaporative Condenser / Fluid Cooler  340 Tons

SOLD 1999 Imeco Evaporative Condenser / Fluid Cooler 340 Tons
Mfg: Imeco Model: XLC - 340
Stock No: MDBC266 Serial No: 24023-1-RH
1999 Imeco Evaporative Condenser / Fluid Cooler. Rated nominal capacities: 340 tons using R-22 at 40F suction, 78F wet bulb, and 105F condensing conditions, and 245 tons using R-717 at 20F suction, 78F wet bulb, and 96.3F condensing conditions. Fluid cooler capacity: 80 gpm using 50% ethylene glycol with a 95F entering temperature, 85F leaving temperature and a 3.55 psi pressure drop. Inlets: (2) 4 in. dia. port, (1) 3in. dia. port. Outlets: (1) 6 in. port, (1) 4 in. port, (1) 3 in. port.. Overall dimensions: 14 ft. 9 in. L x 10 ft. 5-1/2 in. W x 8 ft. 10-7/8 in. H.(ACN495).(BE).

SOLD

Click here for specifications (123.9 KB)
Click here for drawing (55.1 KB)
Click here for more information (523.2 KB)

Click On Picture

1998 Imeco Evaporative Condenser - 805 Tons

SOLD 1998 Imeco Evaporative Condenser - 805 Tons
Mfg: Imeco Model: XLP-XL 805
Stock No: ASAC004. Serial No: 15067-1 RH
1998 Imeco Evaporative Condenser. Model: XLP-XL 805. Rated capacities: 805 tons with R-22 at 105F condensing, 40F suction and 78F wet bulb and 580 tons using R-717 at 96.3F condensing, 20F suction, and 78F wet bulb. Maximum pressure: 250 psi. (3) 62 in. dia. fans. Reliance Electric Fan Motor, 25 hp, 1760 rpm, 230/460 V, 62/31 amps, 60 Hz, 3 phase. Fan Motor, 15 hp, 460 V, 18.3 FLA. (1) Manway, dimensions: 1 ft. 10 in. dia. Inlets/outlets: (2) 4 in. dia. ports, (1) 6 in. dia. port, (1) 1 in. pipe. Outlets: (2) 4 in. dia. port, (1) 1 in. dia. pipe, (2) 2 in. dia. FNPT (drain). Overall dimensions: 19 ft. L x 12 ft. 1 in. W x 15 ft. H.(ACN683BI).

SOLD

Click here for more information (958.2 KB)
Click here for Drawings (185.3 KB)

Click On Picture

2004 Baltimore Aircoil Company Evaporative Condenser - 454 Tons

SOLD 2004 Baltimore Aircoil Company Evaporative Condenser - 454 Tons
Mfg: Baltimore Aircoil Company Model: VC1-454
Stock No: TMCB313.61 Serial No: U040377901MAD
2004 Baltimore Aircoil Company Evaporative Condenser. Model: VC1-454. Capacity: 454 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures or 309 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Airflow: 70,400 cfm. Coil volume: 72 ft. (1) 30 hp Emerson fan motor, 1775 rpm, 230/460 V, 69.0/34.0 A, 60 Hz, 3 phase. Motor pulley diameter: 8 in. Fan pulley diameter: 3 ft 2 in. (3) fans with a diameter of 2 ft. 2 in. Inlets/Outlets: (4) 4 in. pipes, (1) 5 in. NPT male, (1) 8 in. flange, (2) 1 ft.10 in. manway. Approximate overall dimensions: 13 ft. 4 in. L x 11 ft.10 in. W x 14 ft. 8 in. H.(ACN660).

SOLD

Click here for more information (418.7 KB)
Click here for drawing (423.6 KB)

Click On Picture

Unused 2001 Baltimore Aircoil Company Fluid Cooler / Evaporative Condenser  255 Tons

SOLD Unused 2001 Baltimore Aircoil Company Fluid Cooler / Evaporative Condenser 255 Tons
Mfg: Baltimore Aircoil Company Model: F1463-P
Stock No: ADSP201 Serial No: U12674702MAD
Unused 2001 Baltimore Aircoil Company Fluid Cooler / Evaporative Condenser. Model: F1463-P. Capacity ratings: As a fluid cooler it is rated for 763 gpm with a 73F wet bulb temperature and respective 95F and 85F entering and leaving temperatures. As an evaporative condenser it is rated at approximately 255 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures, or 173 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. (3) centrifugal fans, Baldor motors: 40 hp, 1775 rpm 230/460V, 60 Hz,3 phase. Includes BAC centrifugal pump model: 300523 with 5 hp motor. Roberts mechanical float assembly with 8 in. float ball for water level control. (2) 1 ft. 10 in. dia. access doors. Inlets / Outlets: (2) 6 in. suction ports, (2) 6 in. ports, (1) 2 in. MNPT make-up port, (1) 2 in. MNPT drain port, (1) 3 in. MNPT overflow port. Overall dimensions: 20 ft. 11 in. L x 8 ft. 1 in. W x 13 ft. 6 in. H.(ACN1027)(BJ)(BI).

SOLD

Click here for more information (806.4 KB)
Click here for specifications (426.0 KB)

Click On Picture

2001 Baltimore Aircoil Company Evaporative Condenser  581 Tons

SOLD 2001 Baltimore Aircoil Company Evaporative Condenser 581 Tons
Mfg: Baltimore Aircoil Company Model: VC2-581P
Stock No: BDNP06 Serial No: U013326901MAD
2001 Baltimore Aircoil Company Evaporative Condenser. Model: VC2-581P. Capacity at nominal ratings: 581 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures or 418 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. (1) Goulds centrifugal pump. Impeller diameter: 4-7/8 in. with General Electric motor: 1.5 hp, 3450 rpm, 200-230/460 V, 4.8-4.2/2.1 A, 60 Hz, 3 phase. Inlet/outlet: (1) 2-1/2 in. NPT, (1) 1-1/2 in. NPT. (1) Baltimore Aircoil Co. centrifugal pump: 5.80 impeller diameter. U.S. Electrical motor: 5 hp, 1745 rpm, 208-230/460 V, 15.0-13.7/6.85 A, 60 Hz, 3 phase. Inlet/outlet: (2) 6 in. flanged ports. Two motors running (3) fans: (1) Industrial Electric motor: 15 hp, 1770 rpm, 230/460 V, 38.2/19.1 A, 60 Hz, 3 phase.(1) U.S. Electrical motor: 7.5 hp, 1765 rpm, 208-230/460 V, 20.6-19.2/9.6 A, 60 Hz, 3 phase. (3) 5 ft. 6 in. inner fan dia. Pulleys dia: (2) 5-3/4 in driver, (3) 1 ft. 7 in. driven. Tank dimensions: 1 ft. dia. x 2 ft. 3 in. Inlets/outlets: (1) 6 in. port, (4) 2 in. pipe, (1) 4-1/2 in. pipe, (1) 3 in. pipe, (1) 1 in. pipe, (1) in. NPT, (1) in. FNPT. (2) 1-3/8 in. pipe, (2) 1 in. FNPT. Overall dimensions: 21 ft. L x 12 ft. W x 16 ft. H.(ACN640).

SOLD

Click here for drawings (83.2 KB)
Click here for more information (965.2 KB)

Click On Picture

2006 Evapco Evaporative Condenser - 190 Tons

SOLD 2006 Evapco Evaporative Condenser - 190 Tons
Mfg: Evapco Model: PMCB-190
Stock No: BDNP07 Serial No: 6-304313
2006 Evapco Evaporative Condenser. Model: PMCB-190. Rated capacity: 190 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures or 137 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Coil test pressure: 350 P.S.I.G. (1) Centrifugal pump with 5-1/4 in. dia. impeller and U.S. motor: 2 hp, 1725 rpm, 208-230/460 V, 6.20-6.00/3.00 A, 60 Hz, 3 phase. (1) Reliance Electric motor: 10 hp, 1750 rpm, 230/460 V, 24.4/12.2 A, 60 Hz, 3 phase. Pulley info: (1) 6 in. driver, (2) 1 ft. 1 in. driven. (2) 3 ft. 8 in. dia. fan. Inlets/outlets: (1) 2 in. pipe port, (1) 1 in. pipe port, (1) 1-1/2 in. MNPT, (1) in. pipe port, (1) 3/8 in. air valve, (1) in. FNPT, (1) 3-1/2 in. pipe port, (2) 2 in. pipe ports, (1) 4 in. pipe port. Overall dimensions: 16 ft. L x 7 ft. 2 in. W x 12 ft. 2-1/2 in. H.

SOLD

Click here for more information (409.1 KB)
Click here for drawing (17.5 KB)

Click On Picture

1998 Evapco Fluid cooler /  Evaporative Condenser  83 Tons

SOLD 1998 Evapco Fluid cooler / Evaporative Condenser 83 Tons
Mfg: Evapco Model: ATW-68B2
Stock No: CPEG401.40 Serial No: 992414
1998 Evapco fluid cooler / evaporative condenser. Model: ATW-68B2. Capacity ratings: approximately 83 tons as an evaporative condenser using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures, or 60 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. As a fluid cooler it is rated for 250 gpm using a 30% propylene glycol solution with a 75F wet bulb temperature and respective 95F and 85F entering and leaving temperatures. Coil test pressure: 400 psig. (1) 6 ft. dia. fan. Includes all pumps and stands : (2) Paco 10 hp. centrifugal pumps, (1) basin pump with a Dayton 2.0 hp motor. (2) 3 in. triple duty valves. (1) 4 in. 3-way con. valve. (2) 4 in. y strainers. (3) Square D starters. (1) KMC digital control panel. (2) Taco expansion tank. (1) 1 ft. 4 in. W x 2 ft. 4 in. H. access door. Inlets: (1) 4 in. port, (1) 1 in. water make up port. Outlets: (1) 4 in. port, (1) 3 in. overflow port, (1) 2 in. drain port, (2) 1 in. drain ports. Overall dimensions: 12 ft. 9 in. L x 8 ft. 4 in. W x 12 ft. 4 in. H.(ACN440).(BE).

SOLD

Click here for more information (1,820.5 KB)
Click here for drawing (829.2 KB)

Click On Picture

Reco - Evapco Evaporative Condenser  355 Tons

SOLD Reco - Evapco Evaporative Condenser 355 Tons
Mfg: Reco-Evapco Model: RA522N
Stock No: KWBF002 Serial No: 879486
Reco - Evapco Evaporative Condenser. Model: RA522N. Nominal capacity: 355 tons using R-22 with a 105F condensing temperature, 40F suction temperature and a 78F wet bulb temperature, and 252 tons with R-717 with a 96.3F condensing temperature, 20F suction temperature, and a 78F wet bulb temperature. (2) Axial fans, 5 ft. diameter. Fan displacement: 63,800 cfm. (1) Magnetek fan motor, 15 hp, 1755 rpm, 230/460V. Evapco pump, impeller diameter: 5.88 in. Baldor pump motor, 3 HP, 1750 rpm, 208-230/460 V. Inlets: (2) 1 ft. 8 in. man ways, (2) 4 in. dia. port, (1) 3 in. dia. port, (1) 2 in. dia. port. Outlets: (3) 4 in. dia. port, (1) 3 in. dia. port, (1) 2 in dia. port. Overall dimensions: 13 ft. 3 in. L x 10 ft. Wx13 ft 7 in. H.(ACN430).

SOLD

Click here for more information (263.7 KB)

Click On Picture

Evapco Condenser-920 Ton

SOLD Evapco Condenser-920 Ton
Mfg: Evapco Model: PMC-9201
Stock No: DTTC850. Serial No: 870225LH
Evapco Condenser-920 Ton. Model PMC-9201. S/N 870225LH. 6 fans w/4 motors. (SR200)

SOLD

Click here for more information (305.3 KB)

Click On Picture

Evapco Evaporative Condenser  920 Ton

SOLD Evapco Evaporative Condenser 920 Ton
Mfg: Evapco Model: PMC-920N
Stock No: DTTC851. Serial No: 879222RH
Evapco Evaporative Condenser. Model: PMC920N. Nominal capacity: 920 Tons of R-22 at 105F condensing temperature, 40F suction temperature, and 78F wet bulb temperature. R-717 (ammonia) capacity rating: 653 tons of at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. Stainless steel mist eliminators. Overall dimensions: 39 ft. 1 in. L x 9 ft. 11-3/4 in. W x 13 ft. 9-1/2 in. H. (ACN1011-87).

SOLD

Click here for drawing (376.6 KB)
Click here for more information (213.9 KB)

Click On Picture

Evapco Evaporative Condenser - 260 Tons

SOLD Evapco Evaporative Condenser - 260 Tons
Mfg: Evapco Model: ATC-260
Stock No: SSNY01.70 Serial No: 10-382548
Evapco Evaporative Condenser. Model: ATC-260. Nominal capacity: 260 Tons using R-22 at 105F condensing temperature, 40F suction temperature, and 78F wet bulb temperature. Approximate R-717 (ammonia) capacity rating: 187 tons at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. Coil test pressure: 400 PSIG. (1) 10 hp fan motor at 1745/3600 rpm, 230/460V, 60 Hz, 3 phase. (2) Hansen Technologies model 50P hand valves, (2) Hansen Technologies model 50L hand valves. (2) Hansen Technologies model HS8A solenoid valves. (4) Cyrus Shank pressure relief valves. Inlet / outlets: (2) 4-1/4 in. (2) 4-1/4 in. (1) 3-1/2 in. Overall dimensions: 14 ft. 10-1/2 in. L x 8 ft. W x 12 ft. 1 in. H.(H).

SOLD

Click here for more information (588.7 KB)

Click On Picture

1994 Evapco ATW-Series Closed Circuit Fluid Cooler / Evaporative Condenser- 33 Tons

SOLD 1994 Evapco ATW-Series Closed Circuit Fluid Cooler / Evaporative Condenser- 33 Tons
Mfg: Evapco Model: ATW-33A2
Stock No: HDFD230. Serial No: 941728
1994 Evapco ATW-Series Closed Circuit Fluid Cooler / Evaporative Condenser. Model: ATW-33A2. Capacity: 33 tons based on 98 gpm of water flow with a 95F entering temperature, 85F leaving temperature, and a 78F wet bulb. Refrigerant: Freon. This unit has a split circuit Thermal-Pak coil enabling a series flow piping configuration and is furnished with a 4 kw pan heater, thermostat and low water cutoff. Overall dimensions: 11 ft. 4 in. L x 4 ft. 4 in. W x 8 ft. 5 in. H.(ACN213)(BE).

SOLD

Click here for drawing (64.0 KB)
Click here for more information (372.0 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser - 90 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser - 90 Tons
Mfg: Baltimore Aircoil Company Model: VC1-90
Stock No: MDPK550.20 Serial No: USA003150101
Baltimore Aircoil Company Evaporative Condenser. Model: VC1-90. Rated capacity: 90 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures or 64 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Approximate overall dimensions: 10 ft. L x 3 ft. 11-3/4 in. W x 9 ft. in. H.(ACN202).

SOLD

Click here for more information (289.5 KB)

Click On Picture

Evapco Evaporative Condenser  35 Tons

SOLD Evapco Evaporative Condenser 35 Tons
Mfg: Evapco Model: LSC-35
Stock No: RPCN441.15a Serial No: 813498
Evapco Evaporative Condenser. Model: LSC-35. S/N: 813498. Nominal capacity: 35 tons using R-22 at 40F suction, 105F condensing and 78 wet bulb. Rated at 25 tons using R-717 at 20F suction, 96.3F condensing and 78F wet bulb. The LSC model is a centrifugal fan, forced draft condenser that is quiet and ideal for applications where noise is a concern. Centrifugal fans assist in counteracting static pressure loss related to ductwork and these units are suitable for installations indoors where it is desirable to hide the unit, or when this is the only space available. Copper sweat fittings have been removed. Overall dimensions: 6 ft. 6 in. L x 4 ft. 11 in. W x 7 ft. 6 in. H.(ACN96-81).

SOLD

Click here for drawing (460.4 KB)
Click here for more information (510.0 KB)

Click On Picture

Frick Ammonia Evaporative Condenser - 45 Tons

SOLD Frick Ammonia Evaporative Condenser - 45 Tons
Mfg: Frick Model: HCU - 45A / CCC - 90
Stock No: RMMS01 Serial No: HK83005
Frick Ammonia Evaporative Condenser. Model: HCU 45A / CCC - 90 Nominal capacity: 45 tons using R-717 (ammonia) at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. Total coil surface area: 487 sq. ft. 350 PSIG design pressure. 3 centrifugal fans. Spray pump motor: Mfg. Marathon. Part no. 2772RA model: 4VA56T34D5349BP, or 1/2 hp, 3450 or 2850 rpm, 208-230/460V or 190/380V, 50 or 60 Hz, 3 phase. Inlets/outlets: (2) 3-1/2 in., (3) in., (1) 1-1/2 in., (3) 3-1/3 in., (1) 3 in., 18 in. diameter manway. Overall dimensions: 11 ft. in. L x 4 ft. 6 in. W x 8 ft. H.(H).

SOLD

Click here for more information (352.1 KB)

Click On Picture

Frick Ammonia Evaporative Condenser  85 Tons

SOLD Frick Ammonia Evaporative Condenser 85 Tons
Mfg: Frick Model: HCU - 85A
Stock No: RMMS03 Serial No: HE92012
Frick Ammonia Evaporative Condenser. Model: HCU - 85A. Nominal capacity: 85 tons using R-717 (ammonia) at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. Total coil surface area: 1097 sq. ft. 350 PSIG design pressure. 4 centrifugal fans. Inlets/outlets: (3) 2-1/2 in., (1) 1-1/3 in., (1) 1 in., (2) 4-1/2 in., (1) 3 in., 18 in. diameter manway. Overall dimensions: 13 ft. L x 5 ft. 7 in. W x 10 ft. 1/4 in. H.(ACN330).

SOLD

Click here for more information (294.8 KB)

Click On Picture

Penfield Liquid Treatment System Tank  1,100 Gallons

SOLD Penfield Liquid Treatment System Tank 1,100 Gallons
Mfg: Penfield Model: MA60096-S
Stock No: SLSP194.1 Serial No: 86A235
Penfield Liquid Treatment System Tank. Model: MA60096-S. M & M Welding and Fabrication Company vessel, National Board: 525. Shell side MAWP: 100 psi. at 400 F. Centrifugal pump and Baldor motor. (5) ITT Grinnell air motors, Models: 3212, 3312, 3225, S/N's: 347012, 347013, 003009, 342139, 347010, maximum pressure: 85 psi. (9) ITT Grinnell diaphragm valves. Penfield control panel. Inlet: (1) 2 in. dia. flanged port. Outlet: (1) 2 in. dia. port, (1) 1 in. MNPT. Overall dimensions: 7 ft. 4 in. L x 6 ft. 8 in. W x 11 ft. 2 in. H. RTD.

SOLD

Click here for more information (405.3 KB)

Click On Picture

Evapco Evaporative Condenser - 560 Tons

SOLD Evapco Evaporative Condenser - 560 Tons
Mfg: Evapco Model: PMC-560
Stock No: HEBH002.20 Serial No: A802166R.H
Evapco Evaporative Condenser. Model: PMC-560. Rated capacities: 560 tons using R-22 at 105F condensing, 40F suction and 78F wet bulb and 406 tons using R-717 at 96.3F condensing, 20F suction, and 78F wet bulb. Baldor Electric motor: 7.5 hp, 1765 rpm, 460 V, 9.40 A, 60 Hz, 3 phase. Baldor Electric motor: 20 hp, 1760 rpm, 230/460 V, 48/24 A, 60 Hz, 3 phase. (3) 5 ft. 1 in. dia. fans. Pulleys dia: (2) 5 in. driver, (3) 1 ft. 7 in. driven. (2) 1 ft. 8 in. dia. manway doors. Inlets/outlets: (2) 3 in. ports, (3) 4 in. ports, (1) 8 in. drain. Overall dimensions: 19 ft. 3 in. L x 10 ft. W x 15 ft. 6 in. H.

SOLD

Click here for drawing (77.0 KB)
Click here for more information (698.9 KB)

Click On Picture

1994 Evapco PMCA Series Evaporative Condenser - 715 Tons

SOLD 1994 Evapco PMCA Series Evaporative Condenser - 715 Tons
Mfg: Evapco Model: PMCA-715
Stock No: DFDT03 Serial No: 942572M
1994 Evapco PMCA Series Evaporative Condenser. Model: PMCA -715. Nominal capacity: 715 tons using R-22 with a 105F condensing temperature, 40F suction temperature and a 78F wet bulb temperature, and 500 tons with R-717 with a 96.3F condensing temperature, 20F suction temperature, and a 78F wet bulb temperature. Bell & Gossett pump. Model: 5A6-7/8 BF U.S. Electrical Motors: 7-1/2 hp, 460V, 60 Hz, 3 phase. Square D toggle control. 20 hp fan motor: 460V, 60 Hz, 3 phase. 10 fan motor: 460V, 60 Hz, 3 phase. Configured for left-handed application. Inlets /outlets: (4) 4 in. refrigerant in and out connections, 3 in. overflow and drain, 2 in. make-up. Overall dimensions: 21 ft. 9 in. L x 9 ft. 11-3/4 in. W x 14 ft. 7-3/4 in. H.

SOLD

Click here for more information (521.7 KB)
Click here for specifications (713.9 KB)

Click On Picture

1990 Evapco Fluid Cooler / Evaporative Condenser  196 Tons

SOLD 1990 Evapco Fluid Cooler / Evaporative Condenser 196 Tons
Mfg: Evapco Model: ATW-91C2
Stock No: RGMP289.10 Serial No: 906677
1990 Evapco Fluid Cooler / Evaporative Condenser. Model: ATW-91C2. For Freon it is rated at 196 tons with a 74F wet bulb, 105F condensing and 40F suction. For ammonia it is rated at 141 tons with a 74F wet bulb, 95F condensing and 20F. As a fluid cooler it is rated for 463 gpm with respective entering and leaving temperatures of 98F and 85F and a 74F wet bulb. This unit is arranged for series flow and is furnished with (2) 6 kW pan heaters with thermostat and low water cutoff. Heater voltage: 460/60/3. (1) 20 hp, 2 speed/1 wind. fan motor. Fan belt No: 5B-148. Fan voltage: 460/60/3. Scot pump with (1) 3 hp pump motor. Pump voltage: 460/60/3. Belt No: 58-148. Coil Test Pressure: 350 PSIG. (1) manway, 2 ft. 4 in W x 1 ft. 5 in H. Inlets: (1) 4 in. dia. port, (1) in. hose connect. Outlets: (1) 4 in. dia. port, (1) 3 in. dia. port, (2) 2 in. dia. port. Overall dimensions: 14 ft. L x 7 ft. 10 in. W x 12 ft. 3-3/4 in. H.(ACN521)(BC).

SOLD

Click here for drawing (329.5 KB)
Click here for more information (1,238.9 KB)

Click On Picture

Evapco PMCA Series Evaporative Condenser- 1170 Tons

SOLD Evapco PMCA Series Evaporative Condenser- 1170 Tons
Mfg: Evapco Model: PMCA-1170
Stock No: DFDT02 Serial No: 870072
Evapco PMCA Series Evaporative Condenser. Model: PMCA-1170. Nominal capacity: 1170 tons using R-22 with a 105F condensing temperature, 40F suction temperature and a 78F wet bulb temperature, and 820 tons with R-717 with a 96.3F condensing temperature, 20F suction temperature, and a 78F wet bulb temperature. Mueller pump, model 5G, serial no. 70136-6, 925 gpm, 1750 rpm. (2) pump motor: 7-1/2 hp, 230-460V, 60 Hz, 3 phase. (2) 15 hp fans and (2) 7-1/2 hp fans, 230-460V, 60 Hz, 3 phase. Overall dimensions: 37 ft. 8 in L x 10 ft. W x 13 ft. 2-3/4 in. H.

SOLD

Click here for more information (222.1 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser - 150 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser - 150 Tons
Mfg: Baltimore Aircoil Company Model: VLC 150
Stock No: HDDC222.12a Serial No: 764271P
Baltimore Aircoil Company Evaporative Condenser. Model: VLC 150. Nominal capacity: 150 tons using R-22 at 105F condensing, 40F suction, and 78F wet bulb temperatures or 108 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Open drip-proof fan motor: 10 hp, 1750 rpm, 230/460v, 60 Hz, 3 phase. Ideal for noise sensitive applications and those requiring a minimal silhouette. Air entry is also possible on both sides offering flexibility in location. Listed shipping weight: 11100 lbs. Overall dimensions: 13 ft. 4-3/4 in. L x 5 ft. 4-1/2 in. W x 10 ft. 7 in. H.(ACN286-76).

SOLD

Click here for drawing (1,136.7 KB)
Click here for more information (234.5 KB)

Click On Picture

Evapco / Crepaco Evaporative Condenser  710 Tons

SOLD Evapco / Crepaco Evaporative Condenser 710 Tons
Mfg: Evapco Model: CPM-710N
Stock No: DFDT01 Serial No: 857002
Evapco / Crepaco Evaporative Condenser. Model: CPM-710N. Nominal capacity: 710 tons using R-22 at 105F condensing temperature, 40F suction temperature, and 78F wet bulb temperature. R-717 (ammonia) capacity rating: 504 tons at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. (4) fans, with (2) 15 hp fan motors. This unit was built for Crepaco by Evapco and previously installed in Dallas, Texas. Overall dimensions: 27 ft. 3 in. L x 10 ft. W x 13 ft. H.

SOLD

Click here for more information (342.3 KB)

Click On Picture

1990 Evapco Evaporative Condenser  755 Tons

SOLD 1990 Evapco Evaporative Condenser 755 Tons
Mfg: Evapco Model: PMCA-755
Stock No: CCPH01.25 Serial No: 901336
1990 Evapco PMCA Series Evaporative Condenser. Model: PMCA-755. Nominal capacity: 755 tons using R-22 with a 105F condensing temperature, 40F suction temperature and a 78F wet bulb temperature, and approximately 530 tons with R-717 with a 96.3F condensing temperature, 20F suction temperature, and a 78F wet bulb temperature. Overall dimensions: 20 ft. 2 in. L x 10 ft. W x 14 ft. 11 in. H.(ACN958).(H)

SOLD

Click here for more information (634.4 KB)

Click On Picture

1990 Evapco PMCA Series Evaporative Condenser- 350 Tons

SOLD 1990 Evapco PMCA Series Evaporative Condenser- 350 Tons
Mfg: Evapco Model: PMCA 350
Stock No: AACA2075.85 Serial No: 904473
1990 Evapco PMCA Series Evaporative Condenser. Model: PMCA 350. Nominal capacity: 350 tons using R-22 with a 105F condensing temperature, 40F suction temperature and a 78F wet bulb temperature, and 245 tons with R-717 with a 96.3F condensing temperature, 20F suction temperature, and a 78F wet bulb temperature. US Electrical pump motor: 4.7 / 5.0 hp, 1745 rpm, 208-230 / 460V and 190/380V, sf: 1.25, 50/60 Hz, 3 phase. Overall dimensions: 13 ft. 5 in. L x 10 ft. W x 13 ft. 4 in. H.(ACN493).

SOLD

Click here for more information (394.2 KB)

Click On Picture

1994 Imeco XL Series Evaporative Condenser - 415 Tons

SOLD 1994 Imeco XL Series Evaporative Condenser - 415 Tons
Mfg: Imeco Model: XLP-L-415
Stock No: BDPC284.75 Serial No: 5815-1-LH
1994 Imeco XL Series Evaporative Condenser. Model: XLP-L-415. Rated capacity: 415 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures or 294 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Fan motor: 20 hp. Pump motor: 3 hp. Overall dimensions: 13 ft. 5 in. L x 10 ft. 1 in. W x 15 ft. H.(ACN509).

Click here to see a video of the equipment

SOLD

Click here for more information (459.0 KB)

Click On Picture

 Baltimore Aircoil Company Evaporative Condenser  10 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser 10 Tons
Mfg: Baltimore Aircoil Company Model: VNC-10A
Stock No: NOI1009 Serial No: 77-1241
Baltimore Aircoil Evaporative Condenser. Model no. VNC-10A. Nominal capacity: 10 tons using R-22 at 40F suction, 105F condensing and 78 wet bulb. Rated at 7 tons using R-717 at 20F suction, 96.3F condensing and 78F wet bulb. Paco centrifugal pump. (2) 18 in. manways. Inlets/outlets: ammonia hot / cold: 3 in., overflow: 2 in., drain: 3 in., other: 2 in., 3 in., 1 in. 1-1/2 in. This small unit offers quiet operation in noise sensitive areas provided by slow moving centrifugal fans. Overall dimensions: 4 ft. 2-1/2 in. L x 4 ft. 6 W x 6 ft. 2 in. H.(ACN127a-77).

SOLD

Click here for more information (449.3 KB)

Click On Picture

1997 Evapco PMCB Evaporative Condenser - 250 Tons

SOLD 1997 Evapco PMCB Evaporative Condenser - 250 Tons
Mfg: Evapco Model: PMCB250
Stock No: SPMA01.20 Serial No: 977753W
1997 Evapco Evaporative Condenser. Model: PMCB250. S/N: 977753W. Nominal capacity: 250 tons using R-22 at 40F suction, 105F condensing and 78 wet bulb. Rated at 180 tons using R-717 at 20F suction, 96.3F condensing and 78F wet bulb. (1) 10 hp fan motor, (1) 5 hp fan motor, and (1) 3 hp pump motor. Electrical requirements: 208-230/460V, 60 Hz, 3 phase. Overall dimensions: 18 ft. 9 in. L x 6 ft. 4 in. W x 11 ft. 2 in. H.(ACN424).

Click here to see a video of the equipment

SOLD

Click here for drawings (78.0 KB)
Click here for more information (560.2 KB)

Click On Picture

1995 Baltimore Aircoil Company Evaporative Condenser - 1504 Tons

SOLD 1995 Baltimore Aircoil Company Evaporative Condenser - 1504 Tons
Mfg: Baltimore Aircoil Company Model: VC2-1504
Stock No: DTTC866. Serial No: 95100585
1995 Baltimore Aircoil Company Evaporative Condenser. Model: VC2-1504. 1504 tons using R-22 at 105F condensing, 40F suction and 78F web bulb temperatures or 1083 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. (2) Baltimore Aircoil Company centrifugal pumps, capacity: 834 gpm (ea.) @ 17.4 tdh, impeller diameter: 5.80 in. Baldor industrial motor, 3 hp, 208-230/460 V, 8.5-8.2/4.1 amps, 60 Hz, 3 phase. (6) 66 in. dia fans. (4) fan motors, 25 hp, 1765 rpm, 208-230/460 V, 60 Hz, 3 phase. Inlets / outlets: (2) 1 ft. 8 in. manway ports, (4) 4 in. dia ports. Overall dimensions: 39 ft. 8 in. L x 12 ft.W x 19 ft. H.(ACN1226).

SOLD

Click here for more information (617.2 KB)
Click here for additional information (850.6 KB)

Click On Picture

Un-Used Baltimore Aircoil Company CXV Evaporative Condenser  320 Tons

SOLD Un-Used Baltimore Aircoil Company CXV Evaporative Condenser 320 Tons
Mfg: Baltimore Aircoil Company Model: CXV-253
Stock No: NBAC01.255 Serial No:
Un-Used Baltimore Aircoil Company CXV Evaporative Condenser. Model CXV-253. Approximate capacities: 320 tons using R-22 at 105F condensing temperature, 40F suction temperature and 78F wet bulb temperature, and 253 tons using R-717 at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. Airflow rate: 76,800 cfm. Design features of the CXV series satisfy today's environmental concerns, minimize installation costs, maximize year-round operating reliability, and simplify maintenance requirements. (1) 15 hp fan motor. (1) 5 hp pump motor. Overall dimensions: 12 ft. 1-1/4 in. L x 11 ft. 10 in. W x 15 ft. 10-3/4 in. H.(ACN399).

SOLD

Click here for specifications (1,099.4 KB)
Click here for more information (56.0 KB)

Click On Picture

Frick Ammonia Evaporative Condenser  55 Tons

SOLD Frick Ammonia Evaporative Condenser 55 Tons
Mfg: Frick Model: HCU - 55A
Stock No: RMMS02 Serial No: HN88022
Frick Ammonia Evaporative Condenser. Model: HCU 55A. Nominal capacity: 55 tons using R-717 (ammonia) at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. Total coil surface area: 652 sq. ft. 350 PSIG design pressure. 3 centrifugal fans. Spray pump motor: Mfg. Marathon. Part no. 2772RA, model: 4VA56T34D5349BP, or 1/2 hp, 3450 or 2850 rpm, 208-230/460V or 190/380V, 50 or 60 Hz, 3 phase. Inlets/outlets: (2) 3-1/2 in., (3) in., (1) 1-1/2 in., (3) 3-1/3 in., (1) 3 in., 18 in. diameter manway. Overall dimensions: 12 ft. 2-1/2 in. L x 4 ft. 4 in. W x 8 ft. 11 in. H.

Click here to see a video of the equipment

SOLD

Click here for more information (394.2 KB)

Click On Picture

Baltimore Aircoil Company Evaporative Condenser  52 Tons

SOLD Baltimore Aircoil Company Evaporative Condenser 52 Tons
Mfg: Baltimore Aircoil Company Model: C1722HR
Stock No: AAEC840F Serial No: 88600427
Baltimore Aircoil Company Evaporative Condenser. Model: C1722HR. Belt No: B68. Refrigerant: R-22. Nominal capacity rating using Freon: 52 tons at 105F condensing, 40F suction, and 78F wet bulb temperatures, or approximately 37 tons when used with ammonia (R-717) at 96.3F condensing, 20F suction and 78F wet bulb temperatures. U.S. Electrical Motor, 5 hp, 1720 rpm, 34 rpm (final), 230/460 V, 13.4/6.7 amps, 60 Hz, 3 phase. Manway equipped. 13 in. dia. centrifugal fans. Inlets: (1) 2 in. dia. media port. Outlets: (1) 2 in. dia. media port, (1) 3 in. dia. port. Approximate shipping weight: 2590 lbs. Overall dimensions: 6 ft. 10 in. L x 4 ft. W x 8 ft. 2 in. H.(ACN109-88).

SOLD

Click here for more information (488.9 KB)

Click On Picture

Unused BAC / Frick XLP2 Evaporative Condenser  476.5 Tons

SOLD Unused BAC / Frick XLP2 Evaporative Condenser 476.5 Tons
Mfg: BAC / Frick Model: XLP2-1224-1144
Stock No: HGPM040.150 Serial No: U110077002
(1/2) Unused Frick Forced Draft Counter-flow Evaporative Condenser 476.5 nominal tons. Model: XLP2-1224-1114. Serial No: U110077002. BAC Crossover Model: VCA-1075A. This is a listing for only half of the tower system. These towers consist of two coil and two fan sections that can be used independently at half capacity. One half of this (one coil section and one fan section) tower has been sold already. This offering includes one catwalk and one ladder. Divide the following ratings by 2 when sizing this unit: Nominal Capacity: 11,440 MBH (953 Tons with R-22 refrigerant) based on 95 F condensing temperature with an entering wet bulb of 76.90 F. Tonnage Rating using ammonia refrigerant: 762 TR. Fan HP: 40. Airflow Rate: 134,600 CFM. Pump Motor: (2) 5 HP. Shipping Weight: 42,590 lbs (17,340 lbs heaviest section). Overall dimensions: (2) fan sections: 13 ft. 2 in. L x 11 ft. 10 in. W x 10 ft. H (each), (2) coil sections: 14 ft. L x 11 ft. 11 in. W x 8 ft. H (each), (1) section of frame work: 14 ft. 4 in. L x 8 ft. 4 in. W x 8 ft. 4 in. H (each).(ACN1203a)

SOLD

Click here for specifications (2,616.6 KB)
Click here for drawing (1,183.2 KB)
Click here for more information (219.8 KB)

Click On Picture

2007 Imeco XLP Evaporative Condenser - 635 Tons

SOLD 2007 Imeco XLP Evaporative Condenser - 635 Tons
Mfg: Imeco Model: XLP-L635 RH
Stock No: RCSA01 Serial No: 52621-100
2007 Imeco XLP Evaporative Condenser. Model: XLP-L635 RH. S/N: 52621-100. Nominal Rating (R-22): 635 Tons. Ammonia rating (wet): 448.5 TR with 79.3F WB temp and 95F condensing temp. Ammonia rating (dry): 116.5 TR with 50F dry-bulb temp and 75F condensing temp. Refrigerant: R-717. Spray Pump: 5 HP, 600 GPM. Mfg. Date: 05/25/07. Total Weight: 24,100 lbs (18,300 lbs heaviest section). Overall Dimensions: 17 ft. 7 in. Long x 9 ft. 8.3 in. Wide x 15 ft. High.

Click here to see a video of the equipment

SOLD

Click here for more information (379.6 KB)

Click On Picture

Unused BAC / Frick XLP2 Evaporative Condenser - 953 Tons

SOLD Unused BAC / Frick XLP2 Evaporative Condenser - 953 Tons
Mfg: BAC / Frick Model: XLP2-1224-1144
Stock No: HGPM041.150 Serial No: U110077003
Unused Frick Forced Draft Counter-flow Evaporative Condenser. Model: XLP2-1224-1114. Serial No: U110077003. BAC Crossover Model: VCA-1075A. Nominal Capacity: 11,440 MBH (953 Tons with R-22 refrigerant) based on 95 F condensing temperature with an entering wet bulb of 76.90 F. Tonnage Rating using ammonia refrigerant: 762 TR. Fan HP: 40. Airflow Rate: 134,600 CFM. Pump Motor: (2) 5 HP. Shipping Weight: 42,590 lbs (17,340 lbs heaviest section). Overall dimensions: (2) fan sections: 13 ft. 2 in. L x 11 ft. 10 in. W x 10 ft. H (each), (2) coil sections: 14 ft. L x 11 ft. 11 in. W x 8 ft. H (each), (2) sections of frame work: 14 ft. 4 in. L x 8 ft. 4 in. W x 8 ft. 4 in. H (each).(ACN1203a)

SOLD

Click here for specifications (2,616.6 KB)
Click here for more information (400.6 KB)
Click here for drawing (1,183.2 KB)

Click On Picture

Unused BAC / Frick XLP2 Evaporative Condenser - 953 Tons

SOLD Unused BAC / Frick XLP2 Evaporative Condenser - 953 Tons
Mfg: BAC / Frick Model: XLP2-1224-1144
Stock No: HGPM039.150 Serial No: U110077001
Unused Frick Forced Draft Counter-flow Evaporative Condenser. Model: XLP2-1224-1114. Serial No: U110077001. BAC Crossover Model: VCA-1075A. Nominal Capacity: 11,440 MBH (953 Tons with R-22 refrigerant) based on 95 F condensing temperature with an entering wet bulb of 76.90 F. Tonnage Rating using ammonia refrigerant: 762 TR. Fan HP: 40. Airflow Rate: 134,600 CFM. Pump Motor: (2) 5 HP. Shipping Weight: 42,590 lbs (17,340 lbs heaviest section). Overall dimensions: (2) fan sections: 13 ft. 2 in. L x 11 ft. 10 in. W x 10 ft. H (each), (2) coil sections: 14 ft. L x 11 ft. 11 in. W x 8 ft. H (each).(ACN1203a)

Click here to see a video of the equipment

SOLD

Click here for specifications (2,616.6 KB)
Click here for drawing (1,183.2 KB)
Click here for more information (330.4 KB)

Click On Picture

1994 Vilter Evaporative Condenser - 300 Ton

SOLD 1994 Vilter Evaporative Condenser - 300 Ton
Mfg: Vilter Model: VPF 300
Stock No: RPCN500. Serial No:
1994 Vilter Evaporative Condenser. Model: VPF 300. Rated capacity: 300 tons using R-22 at 105F condensing, 40F suction, and 78F wet bulb temperatures and 210 tons with R-717 at 96.3 condensing, 20F suction, and 78F wet bulb temperatures. Design pressure: 300 psig. The casing panels, tank section, condensing coil and fan spools are hot-dipped galvanized. The coil is constructed of in. steel pipe, staggered and are pitched for complete and free draining of refrigerant. The fan propellers are constructed of heavy duty cast aluminum and are dynamically balanced. Overall dimensions: 19 ft. L x 9 ft 4 in. W x 10 ft. H.(HB2)(ACN453).

Click here to see a video of the equipment

SOLD

Click here for schematics (2,620.6 KB)
Click here for drawing (41.5 KB)
Click here for more information (799.8 KB)

Click On Picture

Evapco Evaporative Condenser  650 Tons

SOLD Evapco Evaporative Condenser 650 Tons
Mfg: Evapco Model: PMC-650N
Stock No: AANF321.80 Serial No: 868021
Evapco Evaporative Condenser. Model: PMC-650N. Nominal capacity: 650 tons using R-22 at 105F condensing temperature, 40F suction temperature, and 78F wet bulb temperature. R-717 (ammonia) capacity rating: 462 tons at 96.3F condensing temperature, 20F suction temperature and 78F wet bulb temperature. Includes (2) 10 kW pan heaters 230/60/3 with thermostat and low water cutoff. Overall dimensions: 27 ft. L x 9 ft. 11-3/4 in. W x 13 ft. 9-1/2 in. H.(ACN850-86).

SOLD

Click here for drawing (163.1 KB)
Click here for more information (347.9 KB)

Click On Picture

Unused BAC / Frick XLP2 Evaporative Condener - 476.5 Tons

SOLD Unused BAC / Frick XLP2 Evaporative Condener - 476.5 Tons
Mfg: BAC / Frick Model: XLP2-1224-1144
Stock No: HGPM042.150 Serial No: U110077004
(1/2) Unused Frick Forced Draft Counter-flow Evaporative Condenser. Model: XLP2-1224-1114. Serial No: U110077004. BAC Crossover Model: VCA-1075A. Please note that half of this tower has been sold already (one top section, one bottom section remaining), divide the following ratings by two: Nominal Capacity: 11,440 MBH, 953 Tons with R-22 refrigerant (/ 2 = 476.5 TR) based on 95 F condensing temperature with an entering wet bulb of 76.90 F. Tonnage Rating using ammonia refrigerant: 762 TR (/ 2 = 381 TR). Fan HP: 40 ( / 2 = 20HP). Airflow Rate: 134,600 CFM. Pump Motor: 5 HP. Shipping Weight: 42,590 lbs (/ 2 = 22,760 lbs), 17,340 lbs heaviest section. Overall dimensions: fan sections: 13 ft. 2 in. L x 11 ft. 10 in. W x 10 ft. H (each), coil sections: 14 ft. L x 11 ft. 11 in. W x 8 ft. H (each).(ACN1203a)

Click here to see a video of the equipment

SOLD

Click here for specifications (2,616.6 KB)
Click here for more information (350.7 KB)
Click here for drawing (1,183.2 KB)

Click On Picture

Imeco PF346 Evaporative Condenser

SOLD Imeco PF346 Evaporative Condenser
Mfg: Imeco Model: PF346
Stock No: BDPC290.2a Serial No: 2310-1-RH
Imeco Condenser. Model: PF346. S/N: 2310-1-RH. (2) Fan Motors: 5hp, 208-230/460V. Overall Dimensions: 177 L x 134 W x 189 H.

Click here to see a video of the equipment

SOLD

Click here for more information (199.7 KB)

Click On Picture

Imeco Condenser PF346 Evaporative Condenser

SOLD Imeco Condenser PF346 Evaporative Condenser
Mfg: Imeco Model: PF346
Stock No: BDPC291.2a Serial No: 2310-1-LH
Imeco Condenser. Model: PF346. S/N: 2310-1-LH.

Click here to see a video of the equipment

SOLD

Click here for more information (191.8 KB)

Click On Picture

Baltimore Air Coil Evaporative Condenser - 400 Tons

SOLD Baltimore Air Coil Evaporative Condenser - 400 Tons
Mfg: Baltimore Air Coil Model: VLC- 400
Stock No: BNCA173A Serial No: 764067P
Baltimore Air Coil Company Evaporative Condenser. Nominal rated capacity: 400 tons using R-22 at 105F condensing, 40F suction, and 78F wet bulb temperatures or 288 tons using R-717 at 96.3F condensing, 20F suction and 78F wet bulb temperatures. Last used with ammonia. The fans, motor, and drive system are located outside of the moist discharge airstream, protecting them from moisture, condensation and icing. Unit is suitable for year-round operation. Number of fans: 8. Fan diameter: 1 ft. 7 in. Number of motors: 4. Typical motor, 7.5 hp, 1740 rpm, 230/460 V, 21.6/10.8 amps, 60 Hz, 3 phase. Inlets: (2) 3 in. dia. ports, (1) 4 in. dia. port. Outlets: (2) 2 in. dia. ports, (1) 6 in. dia. port. Overall dimensions: 18 ft. 6 in. L x 9 ft. 1 in. W x 10 ft. 6 in. H.(ACN565-76).

Click here to see a video of the equipment

SOLD

Click here for more information (460.9 KB)

Click On Picture

BAC Series V Evaporative Condenser - 261 Tons

SOLD BAC Series V Evaporative Condenser - 261 Tons
Mfg: Baltimore Aircoil Company Model: C-2443-K
Stock No: RBIE01.80 Serial No: 92100942
BAC Series V Evaporative Condenser 261 Tons. Model: C-2443-K. Serial number: 92100942. Year 1992. Refrigeration rating (nominal): 261 TR (R-22) / 185 TR (R-717 ammonia). Fan Motor: US Motors, 10 HP, 208-230/460 Volts, 30.0-27.2/13.6 Amps, 1720 RPM, 60 Hz, 3-phase, 215T frame. Belt: 3B135. Pump Specs: Catalog No.: 10-30505-730061-1622, Stock No.: 60062887-300520, S/N: SGM050592J, GPM 382 GPM, 15.4 TDH, 5.10 Impeller. Pump Motor: Marathon Electric, 3 HP, 208-230/460 Volts, 9-8.8/4.4 amps, 1725 RPM, 60 Hz, 3-phase (also rated for 50 Hz). Shipping weight 11,860 lbs (8,460 lbs heaviest section). Overall dimensions: 7 ft. 11 in. W x 17 ft. 6 in. L x 12 ft. 7 in. H.

Click here to see a video of the equipment

SOLD

Click here for drawing (288.3 KB)
Click here for more information (309.8 KB)

Click On Picture

Frick Evaporative Condenser Tower - 145 Tons

SOLD Frick Evaporative Condenser Tower - 145 Tons
Mfg: Frick Model: HCU-145A
Stock No: KBMW156D Serial No: HA87036
Frick / Johnson Controls Evaporative Condenser Tower. Model: CCC290 / HCU145A. S/N: HA87036. SO: 262026. Nominal rating with R-22 is 145 TR at 96.3F condensing and 78F W.B. (R-717 Ammonia rating is 102 TR). Design pressure: 350 PSIG. Shipping weight 11,200 lbs (heaviest section 7,030 lbs). Max operating weight: 12,500 lbs. Inlet/outlet connections: 4 in. / 3 in. Overall Dimensions: 12 ft. 6 in. L x 4 ft. 10 in. W x 11 ft. H.

SOLD

Click here for more information (282.3 KB)

Click On Picture

2003 Baltimore Aircoil VC2 Evaporative Condenser  420 Tons

SOLD 2003 Baltimore Aircoil VC2 Evaporative Condenser 420 Tons
Mfg: Baltimore Aircoil Company Model: VC2-420-R
Stock No: RCSC1809.25 Serial No: U037773101MAD
Baltimore Aircoil Company VC2 Evaporative Condenser. Model: VC2-420-R. S/N: U037773101MAD. Belt: 2B150. Year: 2003. Nominal refrigeration tonnage rating (R-22): 420tons. Rating with R-717 Ammonia: 298 tons. Base heat rejection: 6,174 MBH. 250 PSIG. VC2-Series Evaporative Condensers are traditional style forced draft evaporative condensers with axial fans to minimize energy consumption. The steel panels and structural elements are constructed of heavy-gauge G-235 hot-dip galvanized steel. Fan motor: 5 HP, 60 Hz, 3-phase. BAC centrifugal pump:, 5 HP, 60 Hz, 3-phase. Refrigerant ports: 4 in. Shipping weight: 17,410 lbs (12,370 lbs heaviest section). Overall dimensions: 11 ft. 7.25 in. L x 11 ft. 10 in. W x 14 ft. 4.75 in. H.

SOLD

Click here for more information (142.8 KB)
Click here for VC2 spec sheet (2,016.7 KB)

Click On Picture

Baltimore Aircoil VC2-Series Evaporative Condenser - 1504 Tons

SOLD Baltimore Aircoil VC2-Series Evaporative Condenser - 1504 Tons
Mfg: Baltimore Aircoil Company Model: VC2-1504
Stock No: LKBA399 Serial No: U071799401
Baltimore Aircoil VC2-Series Evaporative Condenser - 1504 Tons. Model: VC2-1504. S/N: U071799401. Nominal refrigeration tonnage rating (R-22): 1,504 tons. Rating with R-717 Ammonia: 1,067 tons. Base heat rejection: 22,109 MBH. VC2-Series Evaporative Condensers are traditional style forced draft evaporative condensers with axial fans to minimize energy consumption. The steel panels and structural elements are constructed of heavy-gauge G-235 hot-dip galvanized steel. (2) Fan motors, 25 HP, 60 Hz, 3-phase. (2) Fan motors, 15 HP, 60 Hz, 3-phase. (2) Baltimore Aircoil Company centrifugal pumps, 5 HP, 60 Hz, 3-phase. Refrigerant ports: 4 in. Shipping weight: 57,340 lbs (21,400 lbs heaviest section). Overall dimensions: 39 ft. 9 in. L x 11 ft. 10 in. W x 15 ft. 2 in. H.

Click here to see a video of the equipment

SOLD

Click here for drawing (85.9 KB)
Click here for more information (1,005.0 KB)

Click On Picture

Evapco ATC-238B Evaporative Condenser Tower - 238 tons

SOLD Evapco ATC-238B Evaporative Condenser Tower - 238 tons
Mfg: Evapco Model: ATC-238B
Stock No: SDFP151.20 Serial No: 6-297442
Evapco Evaporative Condenser / Closed Loop Cooling Tower. Model: ATC-238B. S/N: 6-297442. Coil Test Pressure 350 PSIG. Base heat rejection: 3,499 MBH. Nominal R-22 rating: 238 TR. R-717 (ammonia) rating: 169 TR. Fan motor: 15 HP, 40,500 CFM. Spray pump: 2 HP, 340 GPM. Shipping weight: 9,130 lbs (heaviest section 7,830 lbs). Overall dimensions: 115.25 in. L x 7 ft. 6 in. W x 11 ft. 9.5 in. H.

SOLD

Click here for dimensional drawing (169.1 KB)

Click Here if you don't see what you're looking for in our online catalog.


Other Equipment:Ammonia Compressors | Recirculators | Ammonia Evaporators | Receivers | Chillers 
Other Categories:IQF Tunnels | 4160 Volt Motor Starters  | Plate Chillers/Coolers | HTST Systems | 2300/4160 Volt Motors  
Other Manufacturers:Freon Air Cooled Chillers | Freon Condensing Units | Freon Compressors | Glycol Systems | Freon Evaporators 

 Ammonia Evaporative Condensers, Evaporative Condensers, Baltimore Aircoil Company, Evapco, Recold