Used Hot Water Boilers, California Hydronics Skid Mounted Hot Water Set, Used APV, Raypak and Teledyne Laars Hot Water Boilers. 
 Genemco Sells Hot Water Boilers, Hot Water Sets, Gas-Fired Hot Water Boilers By Raypak, Teledyne Laars, APV and California Hydronics. 

Click On Picture

2003 Raypak Raytherm Indoor Hydronic Boiler – 66 HP

2003 Raypak Raytherm Indoor Hydronic Boiler – 66 HP
Mfg: Raypak Model: H5-0962
Stock No: RHOH02.3a Serial No: 0304207780
2003 Raypak Raytherm Indoor Hydronic Boiler – 66 HP. Model: H5-0962. S/N: 0304207780. Natural Gas. Input BTUH: 962,700. Output BTUH: 788,600. H5: mechanical modulation, set point 110ºF-170ºF. The Raytherm type H models have a 82% efficiency which, according to Raypak, is the highest of any atmospheric boiler. Max operating temp: 230ºF. Gas port: 1 in. Water ports: 2.5 in. Flue diameter: 14 in. Approximate shipping weight: 705 lbs. Removed in running condition late 2013. Overall dimensions: 32.5 in. W x 52.375 in. L x 33.5 in. H.

Click here for more pictures (298.0 KB)

Click On Picture

1997 Raypak Raytherm Indoor Hydronic Boiler – 66 HP

1997 Raypak Raytherm Indoor Hydronic Boiler – 66 HP
Mfg: Raypak Model: H1-0962CBEAHAAA
Stock No: RHOH04.3a Serial No: 9709142845
1997 Raypak Raytherm Indoor Hydronic Boiler – 66 HP. Model: H1-0962CBEAHAAA. S/N: 9709142845. Natural Gas. Input BTUH: 962,700. Output BTUH: 788,600. H1: mechanical modulation, set point 150ºF-210ºF. The Raytherm type H models have a 82% efficiency which, according to Raypak, is the highest of any atmospheric boiler. Max operating temp: 230ºF. Gas port: 1 in. Water ports: 2.5 in. Flue diameter: 14 in. Approximate shipping weight: 705 lbs. Removed in running condition late 2013. Overall dimensions: 32.5 in. W x 52.375 in. L x 33.5 in. H.

Click here for more information (270.3 KB)

Click On Picture

1996 Raypak Raytherm Indoor Hydronic Boiler – 66 HP

1996 Raypak Raytherm Indoor Hydronic Boiler – 66 HP
Mfg: Raypak Model: H1-0962CBEARAAA
Stock No: RHOH06.3a Serial No: 9603130245
1996 Raypak Raytherm Indoor Hydronic Boiler – 66 HP. Model: H1-0962CBEARAAA. S/N: 9603130245. Natural Gas. Input BTUH: 962,700. Output BTUH: 788,600. H1: mechanical modulation, set point 150ºF-210ºF. The Raytherm type H models have a 82% efficiency which, according to Raypak, is the highest of any atmospheric boiler. Max operating temp: 230ºF. Gas port: 1 in. Water ports: 2.5 in. Flue diameter: 14 in. Approximate shipping weight: 705 lbs. Removed in running condition late 2013. Overall dimensions: 32.5 in. W x 52.375 in. L x 33.5 in. H.

Click here for more information (278.3 KB)

Click On Picture

Unused Spare Raypack Copper Fin Coil

Unused Spare Raypack Copper Fin Coil
Mfg: Raypak Model:
Stock No: RHOH07 Serial No:
Unused Spare Raypack Copper Fin Coil. Overall dimensions: 48 in. L x 21.5 in. W x 3.5 in. H.

Click On Picture

Raypack Spare Parts

Raypack Spare Parts
Mfg: Not Specified Model:
Stock No: RHOH08 Serial No:
Raypack Spare Parts. ITT McDonnel & Miller FS4-3 flow switches. Johnson Controls penn temperature controls, A19ABC-24E, (1) 4E047. Honeywell Tradeline L6008A 1192, Aquastat Controller. Etc.

Click On Picture

Cleaver Brooks CB-Packaged Firetube Hot Water Boiler- 60 HP

Cleaver Brooks CB-Packaged Firetube Hot Water Boiler- 60 HP
Mfg: Cleaver Brooks Model: CB-700-60
Stock No: 250.170 Serial No: L-68819
Cleaver Brooks CB-Packaged Firetube Boiler- 60 HP. Model: CB-700-60. S/N: L-68819. Input: 2,511,000 BTU/HR. Burner: natural gas. Max. pressure: 30 HW psi. Tube material: carbon steel. Number of tubes: 62. Tube dimensions: 2-1/2 in. dia. x 7 ft. 8 in. L. Heat transfer surface area: approx. 310.94 sq. ft. Tube volume: 120 gal. Power supply: 480 V, 3.5 amps, 60 Hz, 3 phase. Minimum circuit capacity: 4.5 amps. Maximum rating circuit: 14 amps. Electrical blower motor- 2 hp. A Firetube boiler is a cylindrical vessel, with the flame in the furnace and the combustion gases inside the tubes. The furnace and tubes are within a larger vessel containing the water which is converted to steam or hot water for process applications or hydronic comfort heating. Hot water is commonly used in heating applications with the boiler supplying water to the system at 180 °F to 220 °F. The operating pressure for hot water heating systems usually is 30 psig to 125 psig. Inlets: (2) 5 in. dia. flanged ports. Outlets: (1) 10 in. dia. flanged port, (1) 2 in. dia. NPT fitting (relief valve), (1) 1 in. dia. low water cut off port, (1) 2 in. dia. drain port. Overall dimensions: 10 ft. 10 in. L x 5 ft. W x 6 ft. 9 in. H.(H15)

Click here for more information (632.1 KB)

Click On Picture

Cleaver Brooks CB-Packaged Firetube Hot Water Boiler- 60 HP

Cleaver Brooks CB-Packaged Firetube Hot Water Boiler- 60 HP
Mfg: Cleaver Brooks Model: CB200-60
Stock No: 85.D001 Serial No: L-69074
Cleaver Brooks CB-Packaged Firetube Boiler- 60 HP. Model: CB200-60. S/N: L-69074. Input: 2,511,000 BTU/HR. Maximum pressure: 30HW psi. Fuel: Gas-Oil. Burner: 4A natural gas. Oil type: 4A. Oil supply: 0.3 gpm (18 gph). Power supply: 460 V, 7 amps, 60 Hz, 3 phase. Minimum circuit ampacity: 8 amps. Maximum circuit protection 28 amps. Cleaver Brooks Motor, 2 and 1-1/2 hp, 3510/2850 rpm, 200-230/460-190/380 V, 5.8-5.4/2.7-5.0/2.5 amps, 60/50 Hz, 3 phase. A Firetube boiler is a cylindrical vessel, with the flame in the furnace and the combustion gases inside the tubes. The furnace and tubes are within a larger vessel containing the water which is converted to steam or hot water for process applications or hydronic comfort heating. Hot water is commonly used in heating applications with the boiler supplying water to the system at 180 °F to 220 °F. The operating pressure for hot water heating systems usually is 30 psig to 125 psig. Inlets: (2) 5 in. dia. flanged ports. Outlets: (1) 10 in. dia. flanged port, (1) 2 in. dia. NPT fitting (relief valve), (1) 1 in. dia. low water cut off port, (1) 2 in. dia. drain port. Overall dimensions: 10 ft. 10 in. L x 6 ft. 11 in. W x 6 ft. 9 in. H.(H15).

Click here for more information (892.0 KB)

Click On Picture

California Hydronics Skid Mounted Hot Water Set - 19.6 sq. ft.

California Hydronics Skid Mounted Hot Water Set - 19.6 sq. ft.
Mfg: California Hydronics Model:
Stock No: BFLV200.7 Serial No:
California Hydronics Skid Mounted Hot Water Set. Bell & Gossett Shell and Tube Heat Exchanger, Model: SU-65-2, Ref. No’s: 93Y77202-03-3 and 5-260-06-060-001, Nat’l Bd: 30030, tube material: copper, number of passes: 2, tube dimensions: 5/8 in. dia. x 5 ft. L, heat transfer surface area: approx. 19.6 sq. ft., tube volume: 2 gal. Bell & Gossett Shell and Tube Heat Exchanger, Model: SU-85-4, Ref. No’s: 93Y77202-01-3 and 5-261-08-060-033, Nat’l Bd: 30027, tube material: copper, number of passes: 4, number of tubes: 44, tube dimensions: 5/8 in. dia. x 5 ft. L, heat transfer surface area: approx. 41 sq. ft., tube volume: 3.5 gal. (2) Condensate Tanks- 10 Gallon, MAWP: 125 psi at 210 °F. Unit is equipped with (2) electro-pneumatic valves and (2) Jordan pressure relief valves. (2) Bell & Gossett Centrifugal Pumps, Model: 11/28C, MAWP: 175 psi, capacity: 60 gpm at 50 ft, 1800 rpm maximum. (2) Baldor Industrial Motors, 3 hp, 1,725 rpm, 230/460 V, 8.2/4.1 amps, 60 Hz, 3 phase. Inlets: (1) 2 in. threaded fitting(female), (1) 4 in. dia. pipe (steam). Outlets: (1) 2 in. dia. pipe (steam), (1) 2 in. dia. pipe (product). Overall dimensions: 8 ft. 4 in. L x 4 ft. 4 in. W x 7 ft. 1 in. H.

Click here for more information (427.5 KB)

Click On Picture

California Hydronics Skid Mounted Hot Water Set

California Hydronics Skid Mounted Hot Water Set
Mfg: California Hydronics Model:
Stock No: BFLV201.7 Serial No:
California Hydronics Skid Mounted Hot Water Set. Heat exchanger dimensions: 10 in. diameter x 61 in. L. (2) Condensate Tanks- 10 Gallon, MAWP: 125 psi at 210 °F. Unit is equipped with (2) electro-pneumatic valves and (2) Jordan pressure relief valves. (2) Bell & Gossett Centrifugal Pumps, Model: 11/28C, MAWP: 175 psi, capacity: 60 gpm at 50 ft, 1800 rpm maximum. (2) Baldor Industrial Motors, 3 hp, 1,725 rpm, 230/460 V, 8.2/4.1 amps, 60 Hz, 3 phase. Inlets: (1) 2 in. threaded fitting(female), (1) 4 in. dia. pipe (steam). Outlets: (1) 2 in. dia. pipe (steam), (1) 2 in. dia. pipe (product). Overall dimensions: 100 in. L x 52 in. W x 85 in. H.

Click here for more information (422.1 KB)

Click On Picture

American-Standard Shell and Tube Hot Water Set  - 25.7 sq ft

American-Standard Shell and Tube Hot Water Set - 25.7 sq ft
Mfg: American-Standard Model:
Stock No: OI274. Serial No: 85J15474-01
American-Standard Shell and Tube Hot Water Set. S/N: 85J15474-01. P/N: 5-162-08-018-001. Single pass. Number of tubes: 210. Tube dimensions: 5/16 in. dia. x 1 ft. 6 in. L. Heat transfer surface area: approx. 25.7 sq. ft. Tube volume: 1.75 gallons. Shell side MAWP: 225 psi @ 450 °F. Tube side MAWP: 150 psi @ 450 °F. Worthington centrifugal pump, Model: D824 with 5 hp Reliance electric moto,. APV/Hebeler welding company tank-12 gallons, MAWP: 75 psi @ 300 °F. Fisher controls pneumatic actuator. Fisher electro pneumatic positioner. Outlets: (1) 3 in. dia. 150 ANSI flanged port, (1) 1 in. dia. NPT fitting (condensate out), (1) 2 in. dia. port (condensate out). Overall dimensions: 6 ft. 11 in. L x 4 ft. 10 in. W x 8 ft. 2 in. H.

Click here for more information (340.4 KB)

Click On Picture

Sterlco Temperature Control System

Sterlco Temperature Control System
Mfg: Sterlco Model: M2B 2010.
Stock No: SGMT536.1a Serial No: 33J5510
Sterlco Temperature Control System. Model: M2B 2010. S/N: 33J5510. MAWP: 150 psi. 9 kw heater with pump capacity of 50 gpm @ 30 psig. Pump, Model: 12S SF, impeller diameter: 5.63 in., 2 hp, 3500 rpm, 575 V. Baldor Industrial Motor, 2 hp, 3450 rpm, 575 V, 2.2 amps, 60 Hz, 3 phase. Nema 4 and 12 enclosure. Standard unit operating range is 0°F to 250°F. Used to circulate water through process and to maintain it at a specified heated temperature. It is designed for use in process temperature control applications using water or a water/glycol mix only. Allen-Bradley controller. Inlets/outlets: (2) 1-1/2 in. threaded male. Overall dimensions: 40 in. L x 15 in. W x 53 in. H. (ACN56)

Click here for more information (304.9 KB)

Click On Picture

Spirax Sarco Heat Set

Spirax Sarco Heat Set
Mfg: Spirax Sarco Model:
Stock No: TACJ0821.3 Serial No: 998719
Spirax Sarco Heat Set. Model no. NA. Type: HVB-1. (1) Spirax Sarco pressure gauge. Spirax Sarco Pressure Powered Pump. Model no. PPEC PUMP. P/N: 70075. Inlets/outlets: (1) 4-1/2 in. flange dia. with (8) ¾ in. mounting holes. 2-7/8 in. adjacent, 7-1/2 in. opposite. (2) 1-1/2 in. MNPT. (1) 2-1/4 in. FNPT. (1) 1-3/4 in. FNPT. (1) ¾ in. FNPT. (1) 5/8 in. MNPT. Overall dimensions: 3 ft. 9-1/2 in. L. x 1 ft. 7-7/8 in. W. x 4 ft. 5 in. H.

Click here for more information (359.6 KB)

Click On Picture

Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater – 199,900 BTUH

Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater – 199,900 BTUH
Mfg: Rheem Manufacturing Co. Model: RF200-92
Stock No: MASH075 Serial No: 1086403151
Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater. Model no: RF200-92. Serial no: RN 1086403151. Rated input: 199,900 BTUH. Rated capacity: 92 gallons with 169.6 gph recovery. Set up for use with natural gas. Maximum inlet: 14 inch. Minimum inlet 4. 5 inches. ANSI: Z21.10.3-1984. Electrical: .3 amps, 120V 50/60 Hz.(ACN31-86).

Click here for more information (52.5 KB)

Click On Picture

1997 Rheem Manufacturing Co. Fury Hot Water Heater – 34,000 BTUH

1997 Rheem Manufacturing Co. Fury Hot Water Heater – 34,000 BTUH
Mfg: Rheem Manufacturing Co. Model: 21V40-7
Stock No: MASH075B Serial No: RN 0797106316
1997 Rheem Manufacturing Co. Fury Hot Water Heater. Model: 21V40-7. Serial No: RN 0797106316. Rated input: 36,000 BTUH. Rated capacity: 40 gallons. Set up for use with natural gas. Maximum inlet: 14 inch. Minimum inlet 5 inches. ANSI: Z21.10.1c-1995(ACN3).

Click here for more information (40.4 KB)

Click On Picture

1994 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater – 199,900 BTUH

1994 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater – 199,900 BTUH
Mfg: Rheem Manufacturing Co. Model: RFD200-91-1
Stock No: MASH079 Serial No: RN 0594G00524
1994 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater. Model: RFD200-91-1. Rated input: 199,900 BTUH. Rated capacity: 91 gallons with 181.8 gph recovery. Set up for use with natural gas. Maximum inlet: 14 inch. Minimum inlet 4. 5 inches. ANSI: Z21.10.3B-1992. Electrical: .3 amps, 120V 50/60 Hz.(ACN31).

Click here for more information (104.4 KB)

Click On Picture

1993 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater – 199,900 BTUH

1993 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater – 199,900 BTUH
Mfg: Rheem Manufacturing Co. Model: RF200-91
Stock No: MASH079A Serial No: 0393D06211
1993 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater. Model: RF200-91. Rated input: 199,900 BTUH. Rated capacity: 91 gallons with 181.8 gph recovery. Set up for use with natural gas. Maximum inlet: 14 inch. Minimum inlet 4. 5 inches. ANSI: Z21.10.3B-1990. Electrical: .3 amps, 120V 50/60 Hz.(ACN31).

Click here for more information (100.0 KB)

Click On Picture

1992 Rheem Manufacturing Co. Rheemglas® Fury Hot Water Heater - 36,000 BTUH

1992 Rheem Manufacturing Co. Rheemglas® Fury Hot Water Heater - 36,000 BTUH
Mfg: Rheem Manufacturing Co. Model: RF200-91
Stock No: MASH079B Serial No: RN 0992105659
1992 Rheem Manufacturing Co. Rheemglas® Fury Hot Water Heater. Model: 21V50-2. Rated input: 36,000 BTUH. Rated capacity: 50 gallons. Set up for use with natural gas. Maximum inlet: 14 inch. Minimum inlet 5 inches. ANSI: Z21.10.1a-1991.(ACN3).

Click On Picture

1992 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater – 199,900 BTUH

1992 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater – 199,900 BTUH
Mfg: Rheem Manufacturing Co. Model: RF200-92
Stock No: MASH079C Serial No: 0892D06688
1992 Rheem Manufacturing Co. Rheemglas® Commercial Hot Water Heater. Model: RF200-92. Rated input: 199,900 BTUH. Rated capacity: 92 gallons with 181.8 gph recovery. Set up for use with natural gas. Maximum inlet: 14 inch. Minimum inlet 4. 5 inches. ANSI: Z21.10.3a-1990. Electrical: .3 amps, 120V 50/60 Hz.(ACN31).

Click here for more information (54.8 KB)



View previously sold Hot Water Boilers. Genemco can source products required for your project.

Click Here if you don't see what you're looking for in our online catalog.


Other Equipment:Used Evaporators  | Dryers  | Gaulin Stainless Clad Homogenizers | Evaporative Condensers  | Ammonia Screw Compressors  
Other Categories:Electric Boilers  | Firetube Boilers  | Watertube Boilers  | Votators and Scraped Surface Heat Exchangers  | UHT Systems  
Other Manufacturers:IQF Tunnels  | Used HTST Systems | FILLERS  | Non-Stainless Tanks  | Sealers  

 Genemco Sells Hot Water Boilers and Hot Water Sets: Teledyne Laars, Raypak and APV