Genemco : Offers Used Ice Makers Online and Used Turbo & North Star Ice Machines at discount prices. 
 Genemco : Buy Used Ice Makers Online, Used Turbo & North Star Ice Machines Online. 

Click On Picture

Morris Ice-Master Remote Ammonia Ice Maker – 15 tons

Morris Ice-Master Remote Ammonia Ice Maker – 15 tons
Mfg: Morris and Associates Model: NIM-RA-15T
Stock No: BDPC675.25 Serial No: 370-382
Morris and Associates Ice-Master Remote Ammonia Ice Maker. Mode: NIM-RA-15T. Serial: 370-382. Ice Type: Nugget. Refrigerant type: remote ammonia. Nominal production rating: 15 tons per 24 hours. Production quantity depends on the refrigerant temperature at evaporator, water inlet temperature, etc. Freeze surface material: stainless steel tubes. Suction accumulator Model: SAA-12D-33L. Built 1981. Serial: SAA-360-1281. Nat’l Bd: 125. Max WP: 250 PSI at 200F. Shell thickness: 0.180 in. Head thickness: 0.187 in. Baldor Washdown Duty Motor: 1HP, 208-230/460V, 60Hz, 3.5-3.2/1.6A, 1725 RPM, Frame: 56C, SF: 1.15. Overall Dimensions: 15 ft. L x 2 ft. 8 in. W x 6 ft. 4 in. H (ACN870).

Click here for more information (318.3 KB)
Click here for Spec Sheet (143.0 KB)

Click On Picture

North Star Equipment Ice Flaker, Model M60-64

North Star Equipment Ice Flaker, Model M60-64
Mfg: North Star Ice Model: M60-64
Stock No: AAEC840.70 Serial No: 35824-B
North Star Equipment Ice Flaker. Model M60-64. Serial number: 35824-B. Carbon steel freezing surface area: 60 sq. ft. approximately 38.2 tons per day of 2 mm ice thickness (1.2 tons of refrigeration per U.S. ton of ice). Total refrigeration load 45.83 tons at -30 °F evaporation temperature. Baldor Industrial Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.6-3.4/1.7 amps, 60 Hz, 3 phase. Electra Gear Speed Reducer, 40 ratio, 43.125 rpm (final). Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrosts cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Inlets: (1) 1 in. dia. feedwater pipe, (1) 1-1/2 in. dia. media port. Outlets: (1) 2-1/2 in. dia. wastewater, (1) 4 in. dia. media port, (1) 68 in. dia. discharge. Overall dimensions: 112 in. L x 76 in. W x 91 in. H. (ACN640).

Click here to see a video walk-around

Click here for specifications (1,282.1 KB)
Click here for more information (231.9 KB)
Click here for additional information (3,062.7 KB)

Click On Picture

2002 B-120 Brontec Liquid Ice™ System – 1215 GPH

2002 B-120 Brontec Liquid Ice™ System – 1215 GPH
Mfg: Brontec Model: B-120
Stock No: BDPC200.22 Serial No: B-120-D00119 / FSK-50-D1-0007
2002 B-120 Brontec Liquid Ice™ System. Model: B-120. Nominal flow range 1215 gph. Refrigerant: Freon R-404a. Electrical requirements: 3 x 460V, 60 Hz, 43A. Precooler: Model: FSK – 50. The precooler is used to cool the saltwater with a minimum (brine) requirement of 3% NaCl at 4.0 BAR. Electrical requirements: 3 x 460V, 60 Hz, 28A. System also includes several Siemens controls to include Simatic(s) S7 TD200, OP7, and Sitop Power 5. Overall B-120 dimensions: 5 ft. 5 in. L x 3 ft. 11 in. W x 5 ft. 9 in. H. Overall precooler dimensions: 4 ft. 11 in. L x 2 ft. 8 in. W x 5 ft. 1 in. H. Stainless steel storage tank. Overall tank dimensions: 9 ft. 8 in. L x 4 ft. 9 in. W x 5 ft. 7 in. H.(H).

Click here to see a video of the equipment

Click here for more information (895.3 KB)

Click On Picture

1999 Howe Rapid Freeze Scotsman Ice Flaker – 1 Ton

1999 Howe Rapid Freeze Scotsman Ice Flaker – 1 Ton
Mfg: Howe Corporation Model: 2000-RL
Stock No: URLA01 Serial No: 010B99F2240
1999 Howe Rapid Freeze Scotsman Flake Ice Maker. Model: 2000-RL. Approximate ice production per 24 hours: 2000 pounds. Refrigerant: R-22. Electrical requirement: 230V/1-phase/60Hz. Refrigeration Requirement: 17,000 BTU/hr (varies with application). Approximate shipping weight: 400 lbs. Common applications: seafood, produce, vegetables, catering, meats, bakeries, dairies, supermarkets, etc.

Click here for product brochure (711.6 KB)
Click here for product manual (1,594.4 KB)
Click here for more information (348.1 KB)

Click On Picture

1995 Howe Rapid Freeze Scotsman Ice Flaker – 1 Ton

1995 Howe Rapid Freeze Scotsman Ice Flaker – 1 Ton
Mfg: Howe Corporation Model: 2000-RL-HP62
Stock No: URLA02 Serial No: 14878
1995 Howe Rapid Freeze Scotsman Flake Ice Maker. Model: 2000-RL-HP62. Approximate ice production per 24 hours: 2000 pounds. Refrigerant: HP62. Electrical requirement: 230V/1-phase/60Hz. Refrigeration Requirement: 17,000 BTU/hr (varies with application). Approximate shipping weight: 400 lbs. Common applications: seafood, produce, vegetables, catering, meats, bakeries, dairies, supermarkets, etc.

Click here for more information (332.0 KB)
Click here for product brochure (711.6 KB)
Click here for product manual (1,594.4 KB)

Click On Picture

1997 Howe Rapid Freeze Scotsman Ice Flaker – 1 Ton

1997 Howe Rapid Freeze Scotsman Ice Flaker – 1 Ton
Mfg: Howe Corporation Model: 2000-RL-HP62
Stock No: URLA03 Serial No: 010K97F1336
1997 Howe Rapid Freeze Scotsman Flake Ice Maker. Model: 2000-RL-HP62. Approximate ice production per 24 hours: 2000 pounds. Refrigerant: R-404A. Electrical requirement: 230V/1-phase/60Hz. Refrigeration Requirement: 17,000 BTU/hr (varies with application). Approximate shipping weight: 400 lbs. Common applications: seafood, produce, vegetables, catering, meats, bakeries, dairies, supermarkets, etc.

Click here for more information (332.7 KB)
Click here for product brochure (711.6 KB)
Click here for product manual (1,594.4 KB)

Click On Picture

1995 Howe Rapid Freeze Scotsman Ice Flaker – 1 Ton

1995 Howe Rapid Freeze Scotsman Ice Flaker – 1 Ton
Mfg: Howe Corporation Model: 2000-RL-HP62
Stock No: URLA04 Serial No: 14577
1995 Howe Rapid Freeze Scotsman Flake Ice Maker. Model: 2000-RL-HP62. Approximate ice production per 24 hours: 2000 pounds. Refrigerant: HP62. Electrical requirement: 230V/1-phase/60Hz. Refrigeration Requirement: 17,000 BTU/hr (varies with application). Approximate shipping weight: 400 lbs. Common applications: seafood, produce, vegetables, catering, meats, bakeries, dairies, supermarkets, etc.

Click here for more information (306.9 KB)
Click here for product brochure (711.6 KB)
Click here for product manual (1,594.4 KB)

Click On Picture

Frick Shell Ice Maker – 25 Tons

Frick Shell Ice Maker – 25 Tons
Mfg: Frick Model:
Stock No: KWBF156.5 Serial No:
Frick Ice Maker. Approximate capacity: 25 tons per day. Auger included. Inlets: (1) 1 ½ in. dia. port, (2) 4 in. dia. port. Outlets: (3) 2 in. dia. port. Overall dimensions: 6 ft. 8 in. L x 9 ft. 5 in. W x 19 ft. 6 in. H.(ACNxx-61).

Click here for more information (502.5 KB)
Click here for manual (2,544.5 KB)

Click On Picture

Frick Ice Maker – 25 Tons

Frick Ice Maker – 25 Tons
Mfg: Frick Model:
Stock No: KWBF157.5 Serial No:
Frick Ice Maker. Approximate capacity: 25 tons per day. National l Board number: 25297. Inlets: (1) 1 ½ in. dia. port, (2) 4 in. dia. port. Outlets: (3) 2 in. dia. port. Overall dimensions: 6 ft. 8 in. L x 9 ft. 5 in. W x 19 ft. 6 in. H(ACNXX-61).

Click here for more information (286.6 KB)

Click On Picture

Baltimore Aircoil ICE CHILLER Thermal Storage Unit – Ice Bank

Baltimore Aircoil ICE CHILLER Thermal Storage Unit – Ice Bank
Mfg: Baltimore Aircoil Company Model: TSU-290
Stock No: SDFP152.4 Serial No: 88600678P
BAC ICE CHILLER Thermal Storage Unit. Also known as an Ice Bank. Model: TSU-290. S/N: 88600678P. Designed to shift energy use to reduce operating costs, while providing a constant 34F water supply for process cooling applications as well as HVAC. In the Ice Build operating mode, ice is built by circulating glycol or refrigerant through the unit’s coils (38-64mm thick). In Ice Only Cooling operating mode, the compressor unit is off and water is circulated though the iced tubes. Chilling with compressor on or solely with the compressor are also available operating modes. Coils are housed in an insulated, sealed box. Galvanized steel coil rating 375 PSIG.

Click On Picture

Scotsman Flake Ice Maker Cabinet

Scotsman Flake Ice Maker Cabinet
Mfg: Scotsman Model: AFE325AS-1A
Stock No: NOI1310 Serial No: 0511320013712
Scotsman Ice Maker. Model: AFE325AS-1A. Serial: 0511320013712. Maximum ice production: 324 lbs per 24 hours. Ice Type: Flake. Storage capacity: 140 lbs. Air temperature: 50-100ºF. Water temperature: 40-100ºF, 20-80 PSI. Electrical Supply: 115 Volts, 10.7 Amp, 60 Hz, 1-Phase. Compressor 115 Volts, 5.6 RL/FLA, 40.0 LRA. Fan 115 Volts, .48 RLA/FLA, 6 W/HP, Auger Drive 115 Volts, 3.2 RLA/ FLA, 1/10 W/HP. Refrigerant: R-134, 11 OZ, 311 Grams. Design Pressure: Low-140 PSI, High–260 PSI. Inside Dimensions: 21 in. L x 21 in. W x 20 in. H. Approximate weight: 215 lbs. Outside Dimensions: 36 in. L x 24 in. W x 38 in H. (ACN32).

Click here for more information (113.5 KB)

Click On Picture

Manitowoc Cube Ice Maker

Manitowoc Cube Ice Maker
Mfg: Manitowoc Ice, Inc. Model: QM45A
Stock No: SWCT09.4 Serial No: 060751293
Manitowoc Ice, Inc. Model: QM45A. S/N: 060751293. Maximum ice production: 95 lbs per 24 hours (70ºF air, 50ºF water). Storage bin holds a maximum of 30 lbs. Cube ice size: 0.875 in. cube (2.22 cm cube). Compact size for easy placement under counters or as a stand-alone unit. The QM-45 model has the following ratings: 1,600 average BTU/Hr (2,600 peak), 1/4 HP compressor, 40ºF to 110ºF ambient temperature range, 33ºF to 90ºF water temperature range, 20 PSI to 80 PSI water pressure range. Refrigerant: R-134, charge 8.0 oz/.227 Kg. Design Pressure High Side 350 PSI / 24 Bar. Design Pressure Low Side 200 PSI / 14 Bar. Electrical: 5.2 Amps, 1-phase, 60 Hz. (ACN19).

Click here for more information (135.1 KB)
Click here for spec sheet (1,097.1 KB)

Click On Picture

Schneider Manufacturing Company Insulated Ice Box

Schneider Manufacturing Company Insulated Ice Box
Mfg: Schneider Manufacturing Model:
Stock No: TAFM044.a Serial No:
Schneider Manufacturing Company Insulated Ice Box. Model: RB-1356. S/N: AK0625. Capacity: 2000 lbs. Inside straight-wall dimensions: 4 ft. 7 in. L x 3 ft. W x 4 ft. 7 in. H. Sight glass dimensions: (2) 1 ft. 1-1/2 in. L x 5 in. W. Inlets: (1) 1 ft. 3-1/2 in. L x 10 in. W (top infeed). Outlets: (1) 3 ft. 5 in. L x 1 ft. W. (door opening). Overall dimensions: 4 ft. 9 in. L x 3 ft. 3 in. W x 5 ft. H.(H17).

Click here for more information (183.8 KB)

Click On Picture

Stainless Steel Reynolds Chunklet Ice Maker®

Stainless Steel Reynolds Chunklet Ice Maker®
Mfg: Reynolds Products, Inc. Model: SCF-400-175
Stock No: NOI1104 Serial No: S101247
Stainless Steel Reynolds Chunklet Ice Maker. Model: SCF-400-175. S/N: S101247.

Click here for more information (143.9 KB)

Click On Picture

Morris and Associates Ice-Master Blower Bank

Morris and Associates Ice-Master Blower Bank
Mfg: Morris Model: Ice Master VFC804A-7W
Stock No: DPFI423.1 Serial No:
Morris and Associates Air Blower Bank. Model: Ice Master VFC804A-7W. Fuji electric ring compressor, 200-230/460 V, 8.7-10/10 hp output, 24-25/12.5 amps, 135/135 max H2O, 388/388 cfm (max), 50/60 Hz . Blower bank features an 8 in. diameter x 91 in. header. Inlets: (5) 3 in. dia. suction pipes. Outlets: (1) 2-1/2 in. dia. vent tube, (1) 8 in. diameter pipe with a 13-1/2 in. flange and (8) 3/4 in. dia. attachment holes at a center-to-center distance of 12 in. Overall dimensions: 8 ft. 4 in. L x 44 in. W x 48 in. H.([H]pumpshop).

Click here for more information (230.6 KB)

Click On Picture

Stainless Steel Screw Auger Conveyor

Stainless Steel Screw Auger Conveyor
Mfg: Not Specified Model:
Stock No: KWBF158.9 Serial No:
Stainless Steel Screw Auger Conveyor. Shaft diameter: 2 in. Auger dimensions: 9-1/2 in. dia. x 10 ft. L. Pitch: 10 in. Inlets: (1) 10 in. x 8 in. Outlets: (1) 10 in. dia. port. Overall dimensions: 10 ft. 5 in. L x 3 ft. 6 in. W x 2 ft. 5 in. H.

Click here for more information (268.7 KB)

Click On Picture

North Star Equipment Ice Flaker, Model M60-64

SOLD North Star Equipment Ice Flaker, Model M60-64
Mfg: North Star Ice Model: M60-64
Stock No: AAEC841.70 Serial No: 35824-B
North Star Equipment Ice Flaker. Model M60-64. S/N: 35824-B. Carbon steel freezing surface area: 60 sq. ft. approximately 38.2 tons per day of 2 mm ice thickness (1.2 tons of refrigeration per U.S. ton of ice). Total refrigeration load 45.83 tons at -30 °F evaporation temperature. General Electric Motor, 1 hp, 1745 rpm, 230/460 V, 3.4/1.7 amps, 60 Hz, 3 phase. Electra Gear Speed Reducer, 40 ratio, 43.625 rpm (final). Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrosts cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Inlets: (1) 1 in. dia. feedwater pipe, (1) 1-1/2 in. dia. media port. Outlets: (1) 2-1/2 in. dia. wastewater, (1) 4 in. dia. media port, (1) 68 in. dia. discharge. Overall dimensions: 112 in. L x 76 in. W x 91 in. H. (ACN640).

SOLD

Click here for more information (361.1 KB)
Click here for additional information (79.3 KB)

Click On Picture

Turbo Ice Machine

SOLD Turbo Ice Machine
Mfg: Turbo Model: IGC225SCER
Stock No: CAM002. Serial No: 925460
Turbo Ice Machine. Model IGC225SCER. S/N 925460. Ice generation 217 tons ice at 95 degree condensing and 32 degree water to the plate. As chiller 341 tons chilling. 45 degrees water in and 33 degrees water out. (3) Royce C120 compressors each with 125 hp motor. Overall dimensions: 45 ft. L x 9 ft. 2 in. W x 7 ft. 7 in. H. Includes freon, all starters, disconnects, pumps, motors, and tanks.

SOLD

Click here for more information (850.8 KB)

Click On Picture

1998 Howe Ice Flake Machine

SOLD 1998 Howe Ice Flake Machine
Mfg: Howe Corporation Model: 2000-RL
Stock No: BRDI811.21 Serial No: 010F98F1836
1998 Howe Ice Flake Machine. Model 2000-RL, S/N 010F98F1836, S.O. No: 30508. Ice production: 2,000 lb/day. Refrigerant: R-22. Ice enters through a 20 in. L x 15 in. W inlet into an accumulation chamber and exits through (2) 11-1/2 in. L x 9-1/2 in. W outlets. (2) 18 in. W x 14-1/2 in. H access doors, with sliding windows, allow access to chamber. Ice can be easily removed with (2) 6.2 cu. ft. capacity push carts with 3/4 in. dia. FPT bottom drains. Marathon Electric Motor: 1/3 hp, 1735 rpm, 115/208-230 V, 60 Hz, 1 phase. Winsmith 920 Motor Drive: 250 ratio, 1750 rpm (input), 6.94 rpm (output), 938 lb-in. torque. Inlets/outlets: (1) 1/4 in. dia. male ferrule, (1) 1/2 in. dia. barb fitting, (1) 1 in. dia. copper tubing. Overall dimensions: 60 in. L x 38-1/2 in. W x 108 in. H. (ACN135)

SOLD

Click here for more information (216.2 KB)

Click On Picture

Morris and Associates Nugget Ice Maker- 20 Ton

SOLD Morris and Associates Nugget Ice Maker- 20 Ton
Mfg: Morris and Associates Model: NIM-60H-20 /Icemaster
Stock No: DPFI796.8a Serial No: 487-593
Morris and Associates Nugget Ice Maker- 20 Ton. Model: NIM-60H-20. S/N: 487-593. Refrigerant: R-22. Factory charged: 210 lbs. Capacity: 20 tons of ice/day. Ideal for creating the clear, dry ice required by the packaged ice industry, this machine is flexible enough to also meet the needs of countless other industries, such as poultry, seafood, produce, pharmaceuticals, and concrete. Features (16) 6 in. dia. stainless steel, double-tapered evaporator tubes which produce hard, dry ice. Screw auger diameter: 8-1/2 in. dia. Screw auger housing diameter: 9-1/2 in. Screw auger length: 12 ft. 3 in. Copeland 8-Cylinder Semi-Hermetic Reciprocating Compressor, Model: 8DS1-6000-TSK-800, S/N: BT-97G05221S. Outlets: (1) 9-1/2 in. dia. screw auger discharge. Overall dimensions: 16 ft. 10 in. L x 39-1/2 in. W x 92-1/2 in. H. ACN870.

SOLD

Click here for more information (150.1 KB)

Click On Picture

Un-used North Star Flake Ice Maker, Model M10SS00

SOLD Un-used North Star Flake Ice Maker, Model M10SS00
Mfg: North Star Ice Model: M10SS00
Stock No: LYNT003. Serial No: 1064
Un-used North Star Flake Ice Maker. Model: M10SS00. S/N: 1064. Nat'l Bd: 1366. 304 Stainless steel construction. Capacity: 4.7 tons/day at -25 °F evaporator temperature and 60 °F water supply temperature. Refrigerant: Freon 22. MAWP @ 300 °F: 150 psi. MDMT @ 150 psi: -20 °F. Head thickness: 0.75 in. Shell thickness: 0.25 in. Coastline Refrigerant Receiver Tank, MAWP @ 650 °F: 150 psi, MDMT @ 150 psi: -20 °F. Leeson Motor, 1/3 hp, 1140 rpm, 208-230/460 V, 0.8 amps, 60 Hz, 3 phase. Electra Dresser Motor Drive, 50 ratio, 22.8 rpm (final). Makes ice from fresh water, seawater or other liquids. Stainless steel water path components make the unit approved for use in USDA-inspected meat and poultry plants and for other food processing applications. Inlets: (1) 1/2 in. dia. pipe (water), (1) 1-1/2 in. dia. Pipe (media). Outlets: (1) 3/4 in. dia. pipe (media), (1) 2-1/2 in. dia. Pipe (waste water), (1) 18 in. dia. discharge. Overall dimensions: 48 in. L x 38 in. W x 48 in. H. (ACN290).

SOLD

Click here for more information (498.0 KB)

Click On Picture

Scottsman Ice Machine

SOLD Scottsman Ice Machine
Mfg: Scotsman Model: AC25MWS-1A
Stock No: EEGC086. Serial No: 683295-04T
Scottsman Ice Machine. Model: AC25MWS-1A, S/N: 683295-04T. Test pressure: 140 low, 235 high. (2) fans. Compressor: 10.7 FLA, 51 LRA. AC supply voltage: 115. Min circuit ampacity: 14.4, Max fuse size: 15, 60 Hz, 1 phase. Overall dimensions: 36 in. L x 24 in. W x 39 in. H. SOLD

SOLD

Click here for more information (173.8 KB)

Click On Picture

SOLD Icemaker   SOLD

SOLD Icemaker
Mfg: Not Specified Model: CAR-12
Stock No: 140-SC-7061 Serial No: 900
Turbo ammonia icemaker, model no. CAR-12, serial no. 900.

SOLD

Click On Picture

SOLD Howe Flake Icemaker  SOLD

SOLD Howe Flake Icemaker
Mfg: Howe Corporation Model: 30EA
Stock No: 7a-SC-5381 Serial No:
Howe flake icemaker model no. 30EA.

SOLD

Click On Picture

SOLD Howe Flake Icemaker    SOLD

SOLD Howe Flake Icemaker
Mfg: Howe Corporation Model: 30EA
Stock No: 7a-SC-6381 Serial No:
Howe flake icemaker model no. 30EA.

SOLD

Click On Picture

SOLD Seattle Ice Equipment Glacier Icemaker Model 4x15 SOLD

SOLD Seattle Ice Equipment Glacier Icemaker Model 4x15
Mfg: Seattle Ice Equipment Corp. Model: 4x15
Stock No: LCNM008. Serial No: 213
Seattle Ice Equipment Corp. Glacier Icemaker Model 4x15, S/N 213. Manufactured date November 19,1980. National Board Number 2920. Union Tank Works, Inc. 150 psi @ 300°F-50°F @ -7.56 psi S/N 5158. Built in 1981. Baldor Motor, hp 1.3, Volts 208-230/460, Amps 5.0-4.8/2.4, 3 phase, rpm 1725. Overall Dimensions 94 in. W x 110 in. L x 99 in. H.

SOLD

Click On Picture

SOLD Howe Flake Icemaker    SOLD

SOLD Howe Flake Icemaker
Mfg: Howe Corporation Model: 20EAR-D
Stock No: 3-SC-7381 Serial No:
Howe flake icemaker model no. 20EAR-D, no drive.

SOLD

Click On Picture

SOLD Turbo Freon Refrigerated Ice Makers SOLD

SOLD Turbo Freon Refrigerated Ice Makers
Mfg: Turbo Model: CF 80
Stock No: 600.Turbo.280 Serial No:
(2) Turbo CF 80 freon refrigerated Ice makers rated at 40 tons each per 24 hour day. Includes a 300 ton FES screw package and Evapco Condenser complete set up for R-22, complete with a refrigerant receiver with all of the site columns, and isolation valves installed and capped . No starter. Can be divided into two seperate ice makers.

SOLD

Click here for more information (60.3 KB)

Click On Picture

Ice Builder

SOLD Ice Builder
Mfg: Not Specified Model:
Stock No: MDBC275 Serial No:
Ice Builder. w Receiver and Valves. 8'7" W x 7'4" H x 18'7" L.

SOLD

Click On Picture

SOLD Baltimore Aircoil Company Ice Storage SOLD

SOLD Baltimore Aircoil Company Ice Storage
Mfg: Baltimore Aircoil Company Model: TSV-237MS
Stock No: ACEU935 Serial No: 99209891
Baltimore Aircoil Company Ice Storage, Model TSV-237MS, S/N 99209891, 8 ft. 2 in. x 10 ft. 7 in. x 7 ft. 10 in. COMPATIBLE WITH ALL CHILLER TYPES: These units are compatible with centrifugal, reciprocating and screw-type chillers since glycol design temperatures during the ice build mode are typically 22°F and higher. Verification of the combined performance of the thermal storage unit and the chiller is critical to successful system operation. Similar to model TSU-237M with the following specifications: latent capacity 237 ton-hours, approx. shipping weight 9,750 lb; approx. operating weight 9,100 lb., tank water volume 2,990 gallons, coil glycol volume 260 gallons, connection size 2 in., unit width 7 ft. 10-38 in., unit length 10 ft. 7-58 in.

SOLD

Click here for more information (114.1 KB)

Click On Picture

SOLD Kohtaki Dry Ice Former, Model: Shirorenga 80 SOLD

SOLD Kohtaki Dry Ice Former, Model: Shirorenga 80
Mfg: Kohtaki Model: Shirorenga 80
Stock No: tPPMI002. Serial No:
Kohtaki Dry Ice Former. Model: Shirorenga 80. Produces 7 in. L x 3 in. W x 1-1/4 H dry-ice blocks within (3) stainless steel dies. Dry-ice process: CO2 injection, pre-forming, compression, elevation, ejection. Unit features a Fuji Electric Counter and injection timer with a maximum set period of 60 sec. Removable access rear panels and top access cover allow for easy maintenance. Kataki Hydraulic Pump with 17-gallon reservoir tank. Mitsubishi Super Line Motor, 2.2 kW, 940/1120/1140 rpm, 200/200/220 V, 10.8/10/9.8 amps, 50/60/60 Hz, 3 phase. Inlets: (1) 1/2 in. dia. CO2 line, (1) 4-1/2 in. pipe fitting. Outlets: (1) 8 in. W x 2-1/2 in. H dry ice outlet. Overall dimensions: 50 in. L x 28 in. W x 51 in. H.

SOLD

Click here for more information (282.3 KB)

Click On Picture

SOLD North Star Flake Ice Maker SOLD

SOLD North Star Flake Ice Maker
Mfg: North Star Ice Model: Model M60.78
Stock No: tMMO004. Serial No: 4401
North Star Flake Ice Maker. Model M60.78. S/N: 4401. Capacity @ -20 evaporated ammonia and with 60 °F water temperature: 34.7 U.S. tons/day. Carbon steel construction. Thickness of ice: 1.5 in. Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrost cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Freezing surface area:78.5 sq. ft. Baldor Industrial Motor, 1 hp, 850 rpm, 230/460 V, 5/2.5 amps, 60 Hz, 3 phase. Electra Motor Drive, 20 ratio, 42.5 rpm (final). Inlets: (1) 2 in. dia. port (liquid), (1) 3 in. dia. refrigerant pipe. Outlets: (1) 2-1/2 in. dia. NPT (female), (1) 68 in. dia. ice discharge. Overall dim: 100 in. L x 100 in. W x 96 in. H.

SOLD

Click here for more information (182.1 KB)

Click On Picture

Loc Ice Builder

SOLD Loc Ice Builder
Mfg: Loc Model: FM750
Stock No: MDBC274 Serial No: 814
Loc Ice Builder. Model: FM750. S/N: 814. Aluminum Clad. w Receiver and Valves. 9'7" W x 9'3" H x 30' L

SOLD

Click here for more information (36.7 KB)

Click On Picture

SOLD North Star Flake Ice Maker SOLD

SOLD North Star Flake Ice Maker
Mfg: North Star Ice Model: M60.77
Stock No: tMMO003. Serial No: 4301
North Star Flake Ice Maker. Model: M60.77. S/N: 4301. Nat'l Bd: 2278. Job No: 5576R. Repaired in April '92. Capacity @ -20 °F evaporated ammonia and with 60 °F water temperature: 34.7 U.S. tons/day. Carbon steel construction. Thickness of ice: 1.5 in. Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrost cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Freezing surface area: approx. 78.5 sq. ft. Reliance Electric Motor, 1.5 hp, 1155 rpm, 230/460 V, 5/2.5 amps, 60 Hz, 3 phase. Electra Motor Drive, 60 ratio, 2.58 rpm (final). Inlets: (1) 1-1/2 in. dia. NPT (liquid, male), (1) 4 in. dia. port with a 7 in. L x 7 in. W flange and (4) 1 in. dia. attachment holes at a center-to-center distance of 5 in. Outlets: (1) 2-1/2 in. dia. NPT (waste-water, male), (1) 68 in. dia. ice discharge. Overall dim: 100 in. L x 100 in. W x 96 in. H.

SOLD

Click here for more information (321.1 KB)

Click On Picture

SOLD Union Tankworks North Star Ice Maker SOLD

SOLD Union Tankworks North Star Ice Maker
Mfg: North Star Ice Model: M-60.75
Stock No: LCNM009. Serial No: 3933
Union Tankworks North Star Ice Maker. Model M-60.75, S/N 3933. National Board Number 1353. 150 psi @ 300°F -50°F @ -7.56 psi USC - 66. Overall dimensions 80 in. W x 104 in. L x 88 in. H.

SOLD

Click here for more information (215.4 KB)

Click On Picture

SOLD North Star Ice Flaker Machine System, Model M40 SOLD

SOLD North Star Ice Flaker Machine System, Model M40
Mfg: North Star Ice Model: M40
Stock No: LYNT2001.200 Serial No:
North Star Ice Flaker Machine System. Model M40.

SOLD

Click here for more information (688.8 KB)

Click On Picture

Manitowoc Ice Maker / Water Machine

SOLD Manitowoc Ice Maker / Water Machine
Mfg: Manitowoc Ice, Inc. Model:
Stock No: BACT1668.6 Serial No:
Manitowoc Ice Maker / Water Machine

SOLD

Click On Picture

SOLD North Star Ice Flaker Machine, Model M40 SOLD

SOLD North Star Ice Flaker Machine, Model M40
Mfg: North Star Ice Model: M40
Stock No: HGBZ001.15 Serial No: 5683A
North Star Ice Flaker Machine. Model M40. S/N 5683A. R13, 150 psi @ 300 °F, -50 °F @ -7.56 psi.

SOLD

Click here for more information (526.4 KB)

Click On Picture

SOLD North Star Ice Flaker Machine, Model M60 SOLD

SOLD North Star Ice Flaker Machine, Model M60
Mfg: North Star Ice Model: M60-80CLD
Stock No: cSC501.150 Serial No: 5063
North Star Ice Flaker Machine. Model M60-80CLD. S/N 5063.

SOLD

Click here for more information (126.4 KB)

Click On Picture

SOLD Cry-O-Pak Ice Packets SOLD

SOLD Cry-O-Pak Ice Packets
Mfg: Cry-O-Pak Model:
Stock No: SWC551a.1 Serial No:
4 cases of Cry-O-Pak Ice Packs.

SOLD

Click On Picture

North Star Ice Flaker System

SOLD North Star Ice Flaker System
Mfg: North Star Ice Model: M40-86S4
Stock No: CSRW001. Serial No: 5772
North Star Ice Flaker System. Model M40-86S4. S/N: 5772. Stainless steel freezing surface. Nat’l Bd: 3722. 304 Stainless steel. 20 ton capacity output per day. (range is based on evaporator temperature of -25 °F and 60 ºF water supply temperature). Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrosts cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. MAWP: 150 psi @ 200 °F. MDMT: -50 °F @ -7.56 psi. Baldor Motor, 3/4 hp, 1725 rpm, 208-230/460 V, 3.2-3.0/15 amps, 60 Hz, 3 phase. Eletcra Motor Drive, ratio: 60, 28.75 rpm (final). Inlets: (1) 3 in. dia. port, (1) 2 in. dia. NPT (female) port. Outlets: (1) 4 in. dia. NPT (female) port. Overall dimensions: 93 in. L x 55-1/2 in. W x 84 in. H. (ACN580).

SOLD

Click here for more information (267.1 KB)

Click On Picture

SOLD Seattle Ice Equipment Glacier Icemaker Model 4x15 SOLD

SOLD Seattle Ice Equipment Glacier Icemaker Model 4x15
Mfg: Seattle Ice Equipment Corp. Model: 4x15
Stock No: LCNM008b. Serial No: 213
Seattle Ice Equipment Corp. Glacier Icemaker Model 4x15, S/N 213. Manufactured date November 19,1980. National Board Number 2920. Union Tank Works, Inc. 150 psi @ 300°F-50°F @ -7.56 psi S/N 5158. Built in 1981. Baldor Motor, hp 1.3, Volts 208-230/460, Amps 5.0-4.8/2.4, 3 phase, rpm 1725. Overall Dimensions 94 in. W x 110 in. L x 99 in. H.

SOLD

Click On Picture

Turbo Ice Machine Stainless Steel

SOLD Turbo Ice Machine Stainless Steel
Mfg: Turbo Model: HP1000A SC
Stock No: 300-TGE-620 Serial No:
Turbo Ice Machine. Model HP1000A SC, Drawing 218-1076-1012. Stainless steel. Set up for freon. Minimum flow: 834 gpm; max flow: 1,650 gpm.

SOLD

Click On Picture

SOLD Union Tankworks North Star Ice Maker SOLD

SOLD Union Tankworks North Star Ice Maker
Mfg: North Star Ice Model: M-60.75
Stock No: LCNM009b. Serial No: 3933
Union Tankworks North Star Ice Maker. Model M-60.75, S/N 3933. National Board Number 1353. 150 psi @ 300°F -50°F @ -7.56 psi USC - 66. Overall dimensions 80 in. W x 104 in. L x 88 in. H.

SOLD

Click On Picture

North Star Ice Equipment Ice Flaker

SOLD North Star Ice Equipment Ice Flaker
Mfg: North Star Ice Model: M-40-89-C
Stock No: RBFM762.105 Serial No: 6158
North Star Ice Equipment Ice Flaker. Model: M40-89-C. S/N: 6158. Nominal capacity: 22.8 tons per day. Carbon steel freezing surface area: 40 sq. ft. Evaporator, Nat'l Bd: 4181, MAWP: 150 psig @ 300°F, MDMT: 50°F @ -7.55 psi, head thickness: 0.625/0.750 in., shell thickness: 0.375/0.375 in. Baldor Motor, 3/4 hp, 1725 rpm, 230/460V, 2.2/1.1 amps, 60 Hz, 3 phase. Power Tech Electra Gear Reducer, Model: 9E 30414BA, ratio: 60, final speed: 28.75 rpm. The model M-40 has the following benefits: makes ice from fresh water, seawater or other liquids, produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor, makes sub-cooled ice with better cooling power than any other ice maker, harvests ice continuously with no defrosts cycles, reduces refrigeration losses with insulated fiberglass enclosure and converts all make-up water to ice eliminating waste. Inlets: (1) 1-1/2 in. dia. water infeed, (1) 1 in. dia. liquid refrigerant feed line, (1) 3/4 in. dia. liquid refrigerant feed line. Outlets: (1) 3 ft. 2 in. dia. ice discharge, (1) 4 in. dia. waste water discharge port, (1) 3/4 in. dia. FNPT drain port, (1) 3 in. dia. liquid refrigerant suction port. Overall dimensions: 6 ft. L x 5 ft. 6 in. W x 7 ft. 1 in. H. (ACN453-89).

SOLD

Click here for additional information (265.2 KB)
Click here for more information (222.0 KB)

Click On Picture

Howe Corporation Ice Flaker – 3 Tons

SOLD Howe Corporation Ice Flaker – 3 Tons
Mfg: Howe Corporation Model: 31-E
Stock No: AAMG197.a Serial No: 36962
1984 Howe Corporation Ice Flaker. Model: 31-E. Refrigerant: R-12 or 502. Rated capacity: 3 tons per day at respective water and air temperatures of 70°F and 90°F.Specifications include: .52 KWH/100lbs. ice. Drive motor: ½ hp, 115/208-230 V, 60 Hz, single phase. Required refrigeration: 51,150 BTU/Hr. Inlets: (1) 6 in. L x 4 in. W, (1) 1 in. dia. port. Outlets: (1) 1 in. dia. port, (1) 1/2 in. dia. port. Overall dimensions: 3 ft. 11 in. L x 3 ft. 4 in. W x 3 ft. 7 in. H.(ACN141-84).

SOLD

Click here for specifications (155.2 KB)
Click here for more information (403.5 KB)

Click On Picture

Howe Flake Ice Maker with Kramer Condensing Unit Package – 3 Tons / Day

SOLD Howe Flake Ice Maker with Kramer Condensing Unit Package – 3 Tons / Day
Mfg: Howe Corporation Model: 31-E
Stock No: GEN9002 Serial No: 36962
This system includes a Howe 31-E flaked-ice maker and Kramer Air-Cooled Freon Condensing Unit. These are the major component parts required to output approximately 6,000 pounds of ice per day (3 tons). Power required for Howe drive motor: 115/208-230 V, 8.0/4.1 amps, 60 Hz, single phase. Power required for Kramer compressor and fan motors: 208/220 Volt, 31.2 amps, 60 Hz, 3 phase. If customer desires, Genemco can complete the system, test run (with electricity, water, refrigerant), and video test for customer approval at additional cost.(ACN248).

SOLD

Click here for Howe Specifications Sheet (155.2 KB)
Click here for more pictures/information (1,500.0 KB)

Click On Picture

Mannhardt & Son Inc. Ice Making Machine- 2 Ton

SOLD Mannhardt & Son Inc. Ice Making Machine- 2 Ton
Mfg: Mannhardt & Son Inc. Model: 2000
Stock No: EKTF9035.3a Serial No:
Mannhardt & Son Inc. Making Machine- 60 cu. ft. Model: 2000. Insulated ice bin has 3-door access. Ice is insulated by 3 in. walls. Machine uses (2) Ross Temperature Ice System Chillers, Model: RF-2051-UF-SS, S/N's: MG4127 and EH1163. Refrigerant: R-12. Refrigerant charge: 52 oz. Test pressure hi/low: 235/140 psi. Electrical requirements: 208/230 Volts, 60 LRA, 7.7 RLA, 60 Hz, single phase. Motor specifications: 1/5 hp, 1.0 FLA. Inlets: (2) 9 in. L x 5-3/4 in. overhead ports. Outlets: (3) 20 in. L x 40 in. H access doors. Overall dimension: 11 ft. 33 in. L x 78 in. W x 104 in. H.(H17).

SOLD

Click here for more information (612.3 KB)

Click On Picture

North Star Ice Flaker Machine, Model M90

SOLD North Star Ice Flaker Machine, Model M90
Mfg: North Star Ice Model: M90-82S4
Stock No: cSC502.200 Serial No: 5264
North Star Ice Flaker Machine. Model M90-82S4. S/N 5264. 304 Stainless steel. 41 ton capacity output per day. (ACN920-82).

SOLD

Click here for Specifications Sheet (237.1 KB)
Click here for more information (179.3 KB)

Click On Picture

North Star Ice Flake Ice Maker Model M20

SOLD North Star Ice Flake Ice Maker Model M20
Mfg: North Star Ice Equipment Corporation Model: M20
Stock No: RBFM974A.5a Serial No:
North Star Ice Equipment Ice Flaker. Model: M20. Approximate capacity: 14 tons per day. Baldor motor: 1 hp, single phase and Electra Motors gear reducer. The model M-20 makes ice from fresh water, seawater or other liquids, and offers continuous harvesting with no defrost cycles. Overall dimensions: 7 ft. 4 in. L x 5 ft. 9 in. W x 4 ft. 9 in. H.

SOLD

Click here for a brochure and specifications (79.7 KB)
Click here for more information (573.2 KB)

Click On Picture

North Star Flaked Ice Making System – 4 Tons / Day with Freon Refrigeration Package

SOLD North Star Flaked Ice Making System – 4 Tons / Day with Freon Refrigeration Package
Mfg: North Star Ice Model: M-10
Stock No: GEN9001 Serial No: 4941
System consists of a North Star Model 10 Ice Flaker with Screw Auger Discharge, 4-Cylinder Carrier / Carlyle R-22 compressor, and Russell VAC-55 Air Cooled Condenser. System should output an approximate maximum of 8,000 lbs (4 tons) of flaked ice per day.

SOLD

Click here for more information (863.0 KB)

Click On Picture

North Star Flake Ice Machine

SOLD North Star Flake Ice Machine
Mfg: North Star Ice Model: M40-89-C
Stock No: RBFM974B.5 Serial No: 5781
North Star Flake Ice Machine. Model: M40-89-C. Approximate capacity: 22.8 tons per day. Carbon steel freezing surface area: 40 sq. ft. Union Tank Works Inc. evaporator and accumulator. Electra Dresser speed reducer. Baldor Motor, 3/4 hp. Surge tank: Inside straight wall dimensions: 17 in. dia. x 3 ft. 1 in. L. The model M-40 makes ice from fresh water, seawater or other liquids, and offers continuous harvesting with no defrost cycles. Inlets: (1) 1-1/2 in. dia. water infeed, (1) 1 in. dia. liquid refrigerant feed line, (1) 3/4 in. dia. liquid refrigerant feed line. Outlets: (1) 3 ft. 2 in. dia. ice discharge, (1) 4 in. dia. waste water discharge port, (1) 3/4 in. dia. FNPT drain port, (1) 3 in. dia. liquid refrigerant suction port. Overall dimensions: 7 ft. 8 in. L x 5 ft. 2 in. W x 6 ft. 9 in. H.(ACN453-89)

SOLD

Click here for additional information (265.2 KB)
Click here for more information (662.6 KB)

Click On Picture

Manitowoc Ice Maker

SOLD Manitowoc Ice Maker
Mfg: Manitowoc Ice, Inc. Model: CJ1006540
Stock No: MYGM040.5a Serial No:
Manitowoc Ice Maker. Model: CJ1006540.

SOLD

Click On Picture

Unused Scotsman Touchfree Air Cooled Nugget Ice Maker and Dispenser

SOLD Unused Scotsman Touchfree Air Cooled Nugget Ice Maker and Dispenser
Mfg: Scotsman Model: MDT5N25A-1H
Stock No: CRCK49.9 Serial No: 09021320012376
Unused Scotsman Touchfree Air Cooled Nugget Ice Maker and Dispenser. Model: MDT5N25A-1H. Approximate capacity per 24 hour period is 523 lbs. of soft, chewable nugget ice, given respective air and water temperatures of 70°F and 50°F. 115V, 60 Hz, 1 phase. Specifically designed to meet the strict requirements of health care facilities, this unit features a “touch-free”, infrared toggle design that dispenses ice when the sensor is triggered, thus eliminating the need of physical contact with the surfaces of the machine and ensuring that the risk of cross-contamination is greatly reduced. This unit was ordered for use in a hospital but never installed, and was only recently taken out of its shipping container for our photographs. Shipping weight: 260 Lbs. Overall dimensions: 2 ft. 2-1/4 in. L x 1 ft. 10-1/4 in. W x 3 ft. 5 in. H.(H16)(ACN40).

SOLD

Click here for more information (318.7 KB)

Click On Picture

Galvanized Steel Screw Auger Conveyor – 9 in. Diameter

SOLD Galvanized Steel Screw Auger Conveyor – 9 in. Diameter
Mfg: Not Specified Model:
Stock No: KWBF251.5 Serial No:
Galvanized Steel Screw Auger Conveyor. Auger dimensions: 9 in. dia x 97 ft. Pitch: 9 in. Dayton electric motor, 2 hp, 1725 rpm, 208-230/460 V, 6.2-5.8/2.9 amps, 60 Hz, 3 phase. Dodge Ti-gear speed reducer, ratio: 25.64, rpm out: 67 (final). Inlets: (1) 10 in. x 10 in. port. Outlets: (1) 10 in. x 10 in. port. Overall dimensions: 97 ft. 6 in. L x 1 ft. 3 in. W x 2 ft. 6 in. H.

SOLD

Click here for more information (250.6 KB)

Click On Picture

Mannhardt & Son Inc. Ice Chest – 2800 lbs.

SOLD Mannhardt & Son Inc. Ice Chest – 2800 lbs.
Mfg: Mannhardt & Son Inc. Model: 2801
Stock No: SIBI031.a Serial No: L-487
Mannhardt & Son Inc. Ice Chest. Model: 2801. Capacity: 2800 lbs. (1) Auger 2 in. dia. x 44 in. L. (2) 20-1/4 in. x 14-1/4 in. compartment doors. Inside dimensions: 7 ft. L x 3 ft. 6 in. W x 5 ft. 3 in. H. Approximate shipping weight 1500 lbs. Overall dimensions: 7 ft. 6 in. L x 5 ft. ¼ in. W x 6 ft. 6-1/2 in. H.(ACN254).

SOLD

Click here for more information (173.9 KB)

Click On Picture

Unused Manitowoc Ice, Inc. Self-Contained Cube Style Ice Maker

SOLD Unused Manitowoc Ice, Inc. Self-Contained Cube Style Ice Maker
Mfg: Manitowoc Ice, Inc. Model: QD-0272A
Stock No: CRCK45.14a Serial No: 310068702
Unused Manitowoc Ice, Inc. Self-Contained Cube Style Ice Maker. Model: QD-0272A. Serial No: 310068702. Rated capacity is: 280 lbs. / 24 hr. period with respective air and water temperatures of 70°F and 50°F. Storage capacity: 100 lbs. Refrigerant: R-404A. 115V, 60Hz, 1 phase. 10.7 amps. Respective high and low side design pressure include: 500 psig and 250 psig. This unit was ordered for use in a hospital but never installed, and was only recently taken out of its shipping container for our photographs. Includes 6 inch attachable legs. Inlet(s): 3/8 in. Ice water making and ½ in. NPT water condensing. Overall dimensions: 2 ft. 6 in. L x 2 ft. 4 in. W x 2 ft. 9 in. H.(ACN24).

SOLD

Click here for more information (266.2 KB)

Click On Picture

1991 Morris & Associates Ice-Master® Remote Ammonia Nugget Ice Maker

SOLD 1991 Morris & Associates Ice-Master® Remote Ammonia Nugget Ice Maker
Mfg: Morris and Associates Model: NIM-RA-40LR
Stock No: BBCF161.130 Serial No: 384-1091
1991 Morris & Associates Ice-Master® Remote Ammonia Nugget Ice Maker. Model: NIM-RA-40LR. S/N: 384-1091. Capacity: 40 tons per day. Unit features: stainless steel sump, auger and discharge chute. Stainless steel double tapered patented tube design. Hot gas defrost. USDA approved. Water pump (amps): (460V)1.6. Auger (amps) 230V/460V: 9.6/4.8. Make-up water gpm:6.72. Bleed off water gpm: 1.79. Conveyor motor (auger): 3 HP. Water pump: 1 HP. Overall dimensions: 18 ft. L x 4 ft.1 in. W x 11 ft. 4 in. H. (ACN1216).

SOLD

Click Here for Pictures of Support Equipment (554.3 KB)
Click here for specifications (143.0 KB)
Click Here for Pictures of Ice Maker (827.4 KB)

Click On Picture

Hoshizaki Water Cooled Stackable / Modular Ice Cube Maker

SOLD Hoshizaki Water Cooled Stackable / Modular Ice Cube Maker
Mfg: Hoshizaki Model: KM-1201DWU
Stock No: EEGC280B.2a Serial No: H22423
Hoshizaki Water Cooled Stackable /Modular Ice Cube Maker. Model: KM-1201DWU. S/N: H22423. Ice production: 48 lbs./hr. Flow rate: 4.3 gpm. (6) Evaporator Plates: 20 in. W x 15 in. H. Wash/Ice control switch. Continuous operation knob with (4) temperature levels. Electrical requirements: AC supply voltage 115/230 V, 3-wires, 60 Hz, 1 phase. Max. fuse size: 20 amps. Min. circuit ampacity: 20 amps. Design pressure: hi/lo 270/225 psi, respectively. Refrigerant: R-502 (2 lbs. 7oz). Compressor, 230 V, 12 RLA, 57 LRA. (2) Pumps 120 V (total), 2.6 FLA (total), 120 W. Inlets/outlets: (1) 1/4 in. dia. male ferrule cooling water outlet, (2) 3/8 in. dia. copper pipes. Overall dimensions: 4ft. 5in. L x 2ft. 4in. W x 2ft. 7 in. H. (ACN 37). FAD

SOLD

Click here for more information (108.8 KB)

Click On Picture

Hoshizaki Water Cooled Cube State Ice Maker

SOLD Hoshizaki Water Cooled Cube State Ice Maker
Mfg: Hoshizaki Model: KM-1201DWU
Stock No: EEGC280.2a Serial No:
Hoshizaki Water Cooled Cube State Ice Maker. Model: KM-1201DWU. Flow rate: 4.3 gpm. (6) Evaporator Plates: 20 in. W x 15 in. H. Wash/Ice control switch. Continuous operation knob with (4) temperature levels. Electrical requirements: AC supply voltage 115/230 V, 3-wires, 60 Hz, 1 phase. Max. fuse size: 20 amps. Min. circuit ampacity: 20 amps. Design pressure hi/lo 270/225 psi, respectively. Refrigerant: R-502 (2 lbs. 7oz). Compressor, 230 V, 12 RLA, 57 LRA. (2) Pumps, 120 V (total), 2.6 FLA (total), 120 W. Inlets/outlets: (1) 1/4 in. dia. male ferrule cooling water outlet, (2) 3/8 in. dia. copper pipes. Overall dimensions: 53 in. L x 28 in. W x 31 in. H. (ACN37).

SOLD

Click here for more information (117.7 KB)

Click On Picture

Unused Manitowoc Ice, Inc. Model B-970 Ice Storage Bin

SOLD Unused Manitowoc Ice, Inc. Model B-970 Ice Storage Bin
Mfg: Manitowoc Ice, Inc. Model: B-970
Stock No: CRCK43A Serial No: 110794105
Unused Manitowoc Ice, Inc. Model B-970 Ice Storage Bin. Rated storage capacity: 710 lbs. at 29.7 cu. ft. Material of construction and design include stainless steel exterior with soft radius corners, PVC base molding, a one-piece, corrosion-free composite resin base, rugged polyethylene seamless bin liner is rigid and impact resistant, and a hinge pin design that holds open the bin door while in use. Top inlet measures: 45-1/2 in. L x 10-1/4 in. W. Front door measures: 44-3/4 in. L x 12 in. W. includes scoop and set of 6 inch attachable legs. This unit was ordered for use in a hospital but never installed, and was only recently taken out of its shipping container for our photographs. Pictures show unit in a white, plastic protective coating as shipped, and then removed to reveal a lustrous, stainless steel surface. Overall dimensions: 4 ft. L x 2 ft. 9 in. W x 3 ft. 8-1/2 in. H.(ACN16).

SOLD

Click here for more information (260.6 KB)

Click On Picture

Unused Scotsman Touchfree Air Cooled Nugget Ice Maker and Dispenser

SOLD Unused Scotsman Touchfree Air Cooled Nugget Ice Maker and Dispenser
Mfg: Scotsman Model: MDT5N25A-1H
Stock No: CRCK46.9 Serial No: 09021320012361
Unused Scotsman Touchfree Air Cooled Nugget Ice Maker and Dispenser. Model: MDT5N25A-1H. Approximate capacity per 24 hour period is 523 lbs. of soft, chewable nugget ice, given respective air and water temperatures of 70°F and 50°F. 115V, 60 Hz, 1 phase. Specifically designed to meet the strict requirements of health care facilities, this unit features a “touch-free”, infrared toggle design that dispenses ice when the sensor is triggered, thus eliminating the need of physical contact with the surfaces of the machine and ensuring that the risk of cross-contamination is greatly reduced. This unit was ordered for use in a hospital but never installed, and was only recently taken out of its shipping container for our photographs. Overall dimensions: 2 ft. 2-1/4 in. L x 1 ft. 10-1/4 in. W x 3 ft. 5 in. H.(ACN40).

SOLD

Click here for more information (158.3 KB)

Click On Picture

2005 Howe Corporation Stainless Steel Rapid Freeze Flake Ice Machine

SOLD 2005 Howe Corporation Stainless Steel Rapid Freeze Flake Ice Machine
Mfg: Howe Corporation Model: 50-EA
Stock No: RYDV176.30 Serial No: 050B05F4736
2005 Howe Corporation Stainless Steel Rapid Freeze Flake Ice Maker. Model: 50-EA. Rated production capacity: 5 tons per 24 hour period. Refrigerant: Flooded ammonia. Material of construction: stainless steel. Power requirements: 208-230/1/60. Pump motor: 1/6 HP, 3450/2850 RPM, 230 V, 1.6/2.0 A, 60/50 Hz, single phase. Drive motor: Marathon Electric 1 HP, 1725 RPM, 115/208-230 V, 13.4/6.8-6.7 A, 60 Hz, single phase. Winsmith drive ratio: 750. Drive output: 2.3 RPM. Inputs/outputs: (1) 2 in. pipe, (2) 1 in. NPT, (1) ¾ in. NPT, (4) 2 in. flange (2 on ice maker, 2 on receiver used to join the two sections together). Ice maker overall dimensions: 4 ft. 5 in. L x 3 ft. 10 in. W x 4 ft. 10 in. H. Refrigerant receiver overall dimensions: 6 ft. 3 in. L x 4 ft. 11 in. W x 4 ft. 5 in. H.(H16)(ACN256).

SOLD

Click here for more information (785.1 KB)

Click On Picture

1990 North Star Ice Flake Ice Maker Model 10

SOLD 1990 North Star Ice Flake Ice Maker Model 10
Mfg: North Star Ice Model: M10.90.S4
Stock No: DFPC399.31 Serial No: 6316
1990 North Star Ice Flake Ice Maker. Model: M10.90.S4. Capacity: 4.7 tons/day at -25 °F evaporator temperature and 60 °F water supply temperature. Refrigerant: Freon 22. MAWP @ 300 °F: 150 psi. MDMT @ 150 psi: -20 °F. Head thickness: 0.75 in. Shell thickness: 0.25 in. Coastline Refrigerant Receiver Tank, MAWP @ 650 °F: 150 psi, MDMT @ 150 psi: -20 °F. Leeson Motor, 1/3 hp, 1140 rpm, 208-230/460 V, 0.8 amps, 60 Hz, 3 phase. Electra Dresser Motor Drive, 50 ratio, 22.8 rpm (final). Makes ice from fresh water, seawater or other liquids. 304-grade stainless steel water path components make the unit approved for use in USDA-inspected meat and poultry plants and for other food processing applications. Inlets: (1) 1/2 in. dia. pipe (water), (1) 1-1/2 in. dia. Pipe (media). Outlets: (1) 3/4 in. dia. pipe (media), (1) 2-1/2 in. dia. Pipe (waste water), (1) 18 in. dia. discharge. Overall dimensions: 48 in. L x 38 in. W x 48 in. H.(H16)(ACN290-90).

SOLD

Click here for additional information (74.1 KB)
Click here for more information (239.0 KB)

Click On Picture

Vogt Ice Turbo Ice Machine Stainless Steel Falling Film Plates

SOLD Vogt Ice Turbo Ice Machine Stainless Steel Falling Film Plates
Mfg: Vogt Ice Model:
Stock No: 300.280 Serial No:
(5) Vogt Ice Turbo Ice Machine Stainless Steel Falling Film Plates. Material of construction: 304 stainless steel. Number of corrugations: 16. These are designed to fit the Vogt Ice Turbo Ice Machine model: HP1000A SC. Inlets/outlets: (2) 1/2 in. dia. ports. Overall dimensions: 2 ft. 6-1/2 in. L x 1-1/2 in. W x 5 ft. 3 in. H. (BO) Van.

SOLD

Click here for more information (86.8 KB)

Click On Picture

Unused 2007 Manitowoc Ice, Inc. Flake Ice Maker with Unused 2008 Condenser

SOLD Unused 2007 Manitowoc Ice, Inc. Flake Ice Maker with Unused 2008 Condenser
Mfg: Manitowoc Ice, Inc. Model: SF0696N / JC0495
Stock No: CRCK43.10 Serial No: 110611975 / 110793383
Unused 2007 Manitowoc Ice, Inc. Flake Ice Maker with Unused 2008 Condenser. Model: SF0696N. rated capacity: 629 lbs./24 hrs. based on respective air and water temperatures of 70°F and 50°F. Design pressure range low side to high side: 250 psig to 500 psig. Refrigerant: R404a. 115V, 60 Hz, 1 phase. This unit is air-cooled remotely and includes an unused Manitowoc condenser, model JC0495. Fan diameter: 18 in. This unit was ordered for use in a hospital but never installed, and was only recently taken out of its shipping container for our photographs. This package does not include a storage container but can be used with a variety of containers including the Manitowoc, model B-970. It does come with four replaceable filters. Ice machine: inlet: 3/8 in. FPT ice making water, refrigerant discharge and liquid lines. Overall condenser dimensions: 2 ft. 4-3/4 in. L x 1 ft. 1-1/2 in. W x 2 ft. 1/4 in. H. Overall ice maker dimensions: 1 ft. 10-3/4 in. L x 2 ft. 3/4 in. W x 2 ft. 2-1/2 in. H.(ACN35).

SOLD

Click here for parts manual (1,549.5 KB)
Click here for sales brochure (398.0 KB)
Click here for more information (488.9 KB)

Click On Picture

North Star Ice M10 Flaked Ice Maker

SOLD North Star Ice M10 Flaked Ice Maker
Mfg: North Star Ice Model: M1080S4
Stock No: LYNT002. Serial No: 4941
North Star Ice M10 Flake Ice Maker. Model: M1080S4. S/N: 4941. Nat'l Bd: 2665. Stainless steel construction. Capacity: 4.0 tons/day at -25 °F evaporator temperature and 60 °F water supply temperature. Refrigerant: Freon. MAWP @ 300 °F: 150 psi. Head thickness: 0.625 in. Dayton Motor, 1/3 hp, 1140/950 rpm, 208-230/460 V, 1.7-1.8/0.8 amps, 60/50 Hz, 3 phase. Electra Dresser Motor Drive, 50 ratio, 22.8/19 rpm (final). Makes ice from fresh water, seawater or other liquids. Stainless steel water path components make the unit approved for use in USDA-inspected meat and poultry plants and for other food processing applications. Inlets: (1) 1/2 in. dia. pipe (water), (1) 1 in. dia. pipe (media). Outlets: (1) 1/2 in. dia. pipe (media), (1) 2-1/2 in. dia. pipe (waste water), (1) 18 in. dia. discharge. Overall dimensions: 48 in. L x 38 in. W x 48 in. H.(H16)

SOLD

Click here for more information (321.5 KB)
Click here for additional information (3,062.7 KB)
Click here for specifications (1,263.8 KB)

Click On Picture

North Star Ice Equipment Ice Flaker

SOLD North Star Ice Equipment Ice Flaker
Mfg: North Star Ice Equipment Model: M-40SS
Stock No: RBFM626.52a Serial No:
North Star Ice Equipment Ice Flaker. Model: M-40SS. Capacity: 20.2 tons per day of 1.5 to 2.0 mm thick ice with a -30˚F evaporator temperature, a 60˚F make-up water temperature and oil-free ammonia refrigerant. Stainless steel freezing surface area: 40 sq. ft. The model M-40 offers the following benefits: higher amount of ice production per ton of refrigeration than any other ice maker using an equally rated compressor, continuous ice harvesting with no defrost cycles, lessened refrigeration losses from insulated fiberglass enclosure and conversion of all make-up water to ice, thus eliminating waste. Connections: 2-1/2 in. suction line, 1-1/4 in. liquid line, ½ in. MPT oil drain line, ½ in. FPT Tank inlet water line, and a 1-1/4 in. FPT tank drain.(GS)(ACN453).

SOLD

Click here for specifications (264.7 KB)
Click here for more information (370.3 KB)
Click here for detailed pictures of freezing surface (238.3 KB)
Click here for additional information (3,062.7 KB)

Click On Picture

North Star Ice Equipment Ice Flaker M60

SOLD North Star Ice Equipment Ice Flaker M60
Mfg: North Star Ice Model: M60
Stock No: BBCF161A.62 Serial No:
North Star Ice Equipment Ice Flaker. Model: M60. Nominal capacity: 38 tons of ice per day of 2 mm ice thickness (1.2 tons of refrigeration per U.S. ton of ice). Steel freezing surface area: 60 sq. ft. Makes ice from fresh water, seawater or other liquids. Produces more ice per ton of refrigeration than any other ice maker using an equally rated compressor. Makes sub-cooled ice with better cooling power than any other ice maker. Harvests ice continuously with no defrosts cycles. Reduces refrigeration losses with insulated fiberglass enclosure. Converts all make-up water to ice eliminating waste. Accumulator Tank- 50 Gallon, straight-wall dimensions: 2 ft. dia. x 2 ft. 2 in. L. Master Electric Motor, 20 hp, 1200 rpm, 230/460 V, 5.2/2.6 amps, 60 Hz, 3 phase, 3-3/4 in. dia. pulley. Falk Drive, ratio: 7.70, rating: 20 hp, final rpm: 155.84. Inlets: (1) 4 in. dia. port, (1) 5/8 in. dia. port, (1) 3/4 in. dia. port, (1) 1/2 in. dia. port. Outlets: (1) 2-1/2 in. dia. drain port, (2) 3/4 in. dia. ports. Overall dimensions: 9 ft. 8 in. L x 7 ft. 8 in. W x 7 ft. 5 in. H.(H16)(ACN640).

SOLD

Click here for specifications (1,282.1 KB)
Click here for more information (279.5 KB)
Click here for additional information (3,062.7 KB)

Click On Picture

2007 Scotsman Flake Ice Maker and Ice Storage Bin Package

SOLD 2007 Scotsman Flake Ice Maker and Ice Storage Bin Package
Mfg: Scotsman Ice Systems Model: FME504AS-1A / HTB250-H
Stock No: JJTT09 Serial No: 07101320013552 / 07091320010940
2007 Scotsman Flake Ice Maker and Ice Storage Bin Package. Model: FME504AS-1A / HTB250-H. Produces up to 550 lbs. of flaked ice in 24 hours given respective air and water temperatures of 70°F and 50°F. Refrigerant: R404a. Storage bin holds up to 250 lbs. Ice maker materials of construction: stainless steel. Storage bin materials of construction: polyurethane. Respective low and high design pressures: 210-500 PSI. Electrical requirements: 115V, 60 Hz, 1 phase, minimum circuit ampacity: 15-3/4. Features include: an AutoSentry monitoring system that constantly monitors workload level on gearbox and automatically shuts down system if there is a problem, an electrical conductivity water sensor eliminates low or no water failures and cannot be affected by adverse water conditions, and a plastic drain pan with a unique design provides ability to quickly channel water away preventing particulate build-up and rust. Storage bin opening dimensions: 2 ft. 3 in. W x 7-1/2 in. H. Overall package dimensions: 2 ft. 6 in. L x 2 ft. 7 in. W x 4 ft. 10 in. H.(H)(ACN32a).

SOLD

Click here for more information (178.0 KB)

Click On Picture

Howe Corporation Rapid Freeze Flake Ice Machine

SOLD Howe Corporation Rapid Freeze Flake Ice Machine
Mfg: Howe Corporation Model: 100-EA
Stock No: MDBC302 Serial No: 5189
Howe Corporation Rapid Freeze Flake Ice Machine. Model: 100-EA. Stainless steel drum. Refrigerant: flooded ammonia. Rated production capacity: 20,000 lbs. per day with respective water and air temperatures of 70°F and 90°F and a water flow of 1.65 gpm. Refrigeration requirements: 170,500 BTUH/Hr. Inside straight-wall dimensions: 3 ft. dia. x 4 ft. 4 in. H. Howe Corporation surge drum. Nat'l Bd No. 5609. Inside straight-wall dimensions: 1 ft. 8 in. dia. x 2 ft. 3 in. L. MAWP: 150 psi @ 650 °F. Graymills electric motor, 1/8 hp. Unit weight: 2604 lbs. Overall dimensions: 5 ft. 11 in. L x 4 ft. 8 in. W x 7 ft. 10 in. H.(H16)(ACN335-88).

SOLD

Click here for more information (331.3 KB)

Click On Picture

2005 Scotsman Stainless Steel Flaked Ice / Ice Water Dispenser

SOLD 2005 Scotsman Stainless Steel Flaked Ice / Ice Water Dispenser
Mfg: Scotsman Model: MDT3F12A
Stock No: SFEC50222.4 Serial No: 05051320014849
2005 Scotsman Stainless Steel Flaked Ice / Ice Water Dispenser. Model: MDT3F12A-1A. Rated capacity per 24 hour period is 392 lbs. of chewable, flaked ice. Refrigerant: Freon (R-134). Electrical requirement: 115V, minimum circuit ampacity: 9.4, 60 Hz, 1 phase. Respective high and low design pressures: 235 psi and 124 psi. Specifically designed to meet the strict requirements of health care facilities, this unit features a “touch-free”, infrared toggle design that dispenses ice when the sensor is triggered, thus eliminating the need of physical contact with the surfaces of the machine and ensuring that the risk of cross-contamination is greatly reduced. Other features include a counter top design, reduced fan noise for quiet operation, convenient toggle switch delivering only ice or ice and water as desired, and a 12 lb. storage bin. Overall dimensions: 1 ft. 2 in. L x 2 ft. W x 2 ft. 10 in. H.(ACN32).

SOLD

Click here for more information (107.8 KB)

Click On Picture

Vogt Ice Turbo Stainless Steel Clad Ice Maker - 40 Ton

SOLD Vogt Ice Turbo Stainless Steel Clad Ice Maker - 40 Ton
Mfg: Vogt Ice Model: Turbo CAR80LR
Stock No: HDCF238. Serial No: 8303700
Vogt Ice Turbo Refrigeration Stainless Steel Clad Ice Maker - 40 Ton. Model: CAR80LR. S/N: 8303700. Refrigerant: ammonia. Power supply: 480 V,18 FLA, 60 Hz, 3 phase. Control power supply: 115 v, 60 Hz, single phase. Turbo Refrigeration Ammonia Oil Separator Tank, S/N: 83-002, MAWP: 150 psi @ -20 to 150 °F. (4) American Stainless Centrifugal Pumps. Model: SSPC, S/N's: 00G3492, 00G3495, 00H4164, 00G3496, Cat. No: KC25454B_V1, size: 1.5x2.0. (4) Baldor Industrial Motors, 1 hp, 1725 rpm, 230/460 V, 3.4/1.7 amps, 60 Hz, 3 phase. (2) Viking Rotary Pumps, Model: K-4925, S/N's: 1985762 and 1949879. (2) Dayton Motors, 1-1/2 hp, 1150/950 rpm, 208-220/440 V, 5.5-5.2/2.6 amps, 60/50 Hz, 3 phase. (2) U.S. Electric Ice Crusher Motor Drives, 2 hp, 1725 rpm, 115 rpm (final), ratio: 11.25, 208-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase. Screw Auger Conveyor, screw auger dimensions: 9 in. dia. x 23 ft. 2 in. L, pitch: 6 in., infeed dimensions: 21 ft. 7 in. L x 10 in. W, discharge dimensions: 10 in. L x 10 in W. Screw Auger Motor, 2 hp, 1740 rpm, 208-230/460 V, 6.6-6.4 amps, 60 Hz, 3 phase. Morris Gear Drive, 10 ratio, 174 rpm (final). Inlets/outlets: (2) 3/4 in. dia. refrigerant discharge port, (2) 1/2 in. dia. drain valve, (2) 1-1/2 in. dia. drain port, (1) 2 in. dia. copper tube feed water port, (1) 2 in. dia. drain port, (2) 2-1/2 in. dia. flanged refrigerant suction port, (4) 3 in. dia. PVC overflow pipe, (1) 3 in. dia. PVC drain port. Screw auger overall dimensions: 25 ft. 8 in. L x 1ft. 6in. W x 2ft. 4 in. H. Overall dimensions: 22 ft. 8 in. L x 8ft. 2in. W x 12 ft. 2 in. H.(HB2)(ACN1400-83).

SOLD

Click here to see installed pictures (90.0 KB)
Click here for additional information (3,606.0 KB)
Click here for more information (899.8 KB)

Click On Picture

Mueller MaximICE® Ice Slurry System – 130 Tons

SOLD Mueller MaximICE® Ice Slurry System – 130 Tons
Mfg: Paul Mueller Model: ORE-100
Stock No: EELD669E.14 Serial No: 231227-1
Mueller MaximICE® Ice Slurry System. Model: ORE–100. Approximate capacity: 130 nominal tons using R-22 Freon or approximately 90 tons using R-717, ammonia. Solution feed requirement to ORE-100: 245 gpm. Required inlet pressure range: 5 - 30 psig. The Mueller MaximICE® orbital pod evaporator (ORE) is capable of making ice slurry with varieties of applications to include the cooling of processing equipment, and Thermal Energy Storage Systems(TES). Ice slurry formed by using a freeze-depressant solution with liquid refrigerant can drain into, or be pumped to the top of a storage tank to be used in a processing heat sink, or have ice directly harvested. Advantages of slurry ice include optional storage container arrangements as it does not adhere to heat transferring surfaces, or need defrosting. 1999 API Ketema evaporator, Leeson electric motor drive, 1998 H.A. Phillips refrigeration pressure receiver, (2) GrundFoss vertical in-line centrifugal pumps, (2) Baldor Electric motors, Danfoss solenoid coil. Stainless steel ice storage tank - 950 Gallon. Inside dimensions: 7 ft. 3 in. L x 5 ft. 11 in. W x 3 ft. H. Overall dimensions: 9 ft. L x 6 ft. 6-1/2 in. W x 12 ft. 2-1/2 in. H.(H16)(ACN850).

SOLD

Click here for product manual (1,044.2 KB)
Click here for more information (1,477.5 KB)

Click On Picture

Mueller MaximICE® Ice Slurry System – 130 Tons

SOLD Mueller MaximICE® Ice Slurry System – 130 Tons
Mfg: Paul Mueller Model: ORE – 100
Stock No: EELD669F.14 Serial No: 231227-2
Mueller MaximICE® Ice Slurry System. Model: ORE–100. Approximate capacity: 130 nominal tons using R-22 Freon or approximately 90 tons using R-717, ammonia. Solution feed requirement to ORE-100: 245 gpm. Required inlet pressure range: 5 - 30 psig. The Mueller MaximICE® orbital pod evaporator (ORE) is capable of making ice slurry for varieties of applications to include the cooling of processing equipment, and Thermal Energy Storage Systems(TES). Ice slurry formed by using a freeze-depressant solution with liquid refrigerant can drain into, or be pumped to the top of a storage tank to be used in a processing heat sink, or have ice directly harvested. Advantages of slurry ice include optional storage container arrangements as it does not adhere to heat transferring surfaces, or need defrosting. 1999 API Ketema evaporator, Leeson electric motor drive, 1998 H.A. Phillips refrigeration pressure receiver, (2) GrundFoss vertical in-line centrifugal pumps, (2) Baldor Electric motors, Danfoss solenoid coil, Harwill Corp. fluid float switch. Stainless steel ice storage tank-950 gallon. Inside dimensions: 7 ft. 3 in. L x 5 ft. 11 in. W x 3 ft. H. Overall dimensions: 9 ft. L x 6 ft. 6-1/2 in. W x 12 ft. 2-1/2 in. H. (ACN850).(H16).

SOLD

Click here for additional information (452.5 KB)
Click here for product manual (1,044.2 KB)
Click here for more information (1,287.6 KB)

Click On Picture

Vogt Turbo CAR-28 Ice Maker with Hopper

SOLD Vogt Turbo CAR-28 Ice Maker with Hopper
Mfg: Vogt Ice Model: CAR-28
Stock No: SGMPM058.65 Serial No: E002090
Turbo CAR-28 Ice Maker with Hopper. Model: CAR-28. S/N: E002090. Refrigerant: Ammonia (717A). Nominal Ice Capacity: 14 tons / 24 hr. Controls: 115V, 60Hz, 1-Phase. Crusher Bar Motor: 2HP, 3.1 FLA, 18.6 LRA, 460V, 60Hz, 3-Phase. Water Pump Motors (2): 0.75HP, 1.7 FLA, 2.2 LRA, 460V, 60Hz, 3-Phase. Hopper Motor: 0.75HP, 115V/230V, 60Hz, 1-Phase. Shipping Weight: 7,819 lbs. Defrost water flow: 22 GPM. Liquid ammonia flow 11. Recommended compressor capacity at 0F: 26.04 TR. Overall hopper dimensions: 93 in. L x 55 in. W x 120 in. H. Overall ice maker dimensions: 104 in. L x 95 in. W x 110 in. H.

Click here to see a video of the equipment

SOLD

Click here for more information (377.5 KB)
Click here for Brochure (3,611.4 KB)

Click On Picture

North Star M20 Flake Ice Maker

SOLD North Star M20 Flake Ice Maker
Mfg: North Star Ice Model: M20-80-SS
Stock No: BDPC674.65 Serial No: 5093
North Star M20 Flake Ice Maker. Model: M20-80-SS. S/N: 5093. Freeze surface material: Stainless Steel. Ice Making Capacity Range: 6.1 to 11.4 tons / 24hr depending on evaporator temperature. Approximate Tons of Refrigeration required (TR) per ton of ice produced: 1.3 TR. Capacity based on 60F water inlet temperature, 1.5-2.0mm ice thickness. Drive motor: 0.5 HP. Weight: 3,800 lbs. Overall Dimensions: 83 in. L x 56 in. W x 51 in. H. (ACN398a-80).

Click here to see a video of the equipment

SOLD

Click here for more information (52.5 KB)
Click here for product brochure (79.7 KB)

Click On Picture

North Star M20 Flake Ice Maker

SOLD North Star M20 Flake Ice Maker
Mfg: North Star Ice Model: M20-80-SS
Stock No: BDPC672.65 Serial No: 5750
North Star M20 Flake Ice Maker. Model: M20-80-SS. S/N: 5750. Freeze surface material: Stainless Steel. Ice Making Capacity Range: 6.1 to 11.4 tons / 24hr depending on evaporator temperature. Approximate Tons of Refrigeration required (TR) per ton of ice produced: 1.3 TR. Capacity based on 60F water inlet temperature, 1.5-2.0mm ice thickness. Drive motor: 0.5 HP. Weight: 3,800 lbs. Overall Dimensions: 83 in. L x 56 in. W x 51 in. H. (ACN398a-80).

Click here to see a video of the equipment

SOLD

Click here for more information (59.1 KB)
Click here for product brochure (79.7 KB)

Click On Picture

North Star M20 Flake Ice Maker

SOLD North Star M20 Flake Ice Maker
Mfg: North Star Ice Model: M20-80-SS
Stock No: BDPC673.65 Serial No: 5092
North Star M20 Flake Ice Maker. Model: M20-80-SS. S/N: 5092. Freeze surface material: Stainless Steel. Ice Making Capacity Range: 6.1 to 11.4 tons / 24hr depending on evaporator temperature. Approximate Tons of Refrigeration required (TR) per ton of ice produced: 1.3 TR. Capacity based on 60F water inlet temperature, 1.5-2.0mm ice thickness. Drive motor: 0.5 HP. Weight: 3,800 lbs. Overall Dimensions: 83 in. L x 56 in. W x 51 in. H. (ACN398a-80).

Click here to see a video of the equipment

SOLD

Click here for more information (46.8 KB)
Click here for product brochure (79.7 KB)

Click Here if you don't see what you're looking for in our online catalog.


Other Equipment:Marley Cooling Towers | Plate Water Chillers | Glycol Chillers | Ammonia Receivers | Frick Reciprocating Compressors 
Other Categories:Stainless Steel Spiral Freezers | Baltimore Aircoil Company Condensers | Mycom Compressors | McQuay Air Cooled Chillers | Scraped Surface Heat Exchangers 

 Genemco : Offers Used Turbo & North Star Ice Machines and Used Ice Makers Online at discount prices.