|
|
Click On Picture
|
2003 Groen Hy-6 HyPlus Atmospheric Steamer
|
|
Mfg: Groen
|
Model: HY-6SG-36
|
|
Stock No: BLGP001.3
|
Serial No:
|
|
2003 Groen Hy-6 HyPlus Atmospheric Steamer with Direct Steam Heated Table Top Heated Tilting Kettle. Model: HY-6SG-36. Cooking chamber cavity dimensions: 20 in. L x 12 in. W x 10 in. H. Each cavity will hold up to three 20 in. L x 12 in. W x 2-1/2 in. H steam table pans. Steam requirements (cavities): 3 to 15 psi. Condenser spray requirements (water): 0.70 to 0.95 gpm @ 30 to 60 psi. Direct Steam Heated Kettle, Model: TDC/3-20, S/N: 70431, MAWP: 55 psi @ 305 °F, MDMT: 32 °F @ 55 psi. This 2/3 jacketed, tilting kettle has a one-piece stainless steel body and a butterfly pouring lip. The kettle has a 180 emery grit interior finish and a bright semi-deluxe exterior finish. Gas Heated Steam Boiler- 3.7 HP, Model: n/a, S/N: n/a. Capacity: 200,000 Btuh. The Groen NGB/3 steam boiler generates low pressure steam for use with cabinet mounted steamers and steam jacketed kettles. It uses a standing pilot and its heat transfer fins inside the combustion chamber add to the unit's high efficiency. Inlets: (1) 1/2 in. dia. NPT (steam), (1) 1/2 in. dia. NPT (condenser spray cold water), (1) 1/2 in. dia. NPT (faucet hot water), (1) 1/2 in. dia. (boiler cold water), (1) 1/2 in. dia. FNPT (natural gas). Outlets: (1) 1-1/2 in. dia. (drain line), (1) 20 in. L x 4 in. W vent. Overall dimensions: 38 in. L x 37 in. W x 58-1/2 in. H. (ACN180).
|
|
Click here for more information (565.8 KB)
Click here for Groen Manual (200.7 KB)
|
|
|
Click On Picture
|
Groen Capkold Bottom-Jacketed Cook Tank
|
|
Mfg: Groen
|
Model: CookTank
|
|
Stock No: SPPP983b.20a
|
Serial No: 128891
|
|
Groen Capkold Bottom-Jacketed Cook Tank. Model: CookTank. S/N: 128891. Stainless steel. MAWP 100 psi @ 338 °F. Inside dimensions: 63 in. L x 32 in. W x 34 in. H. (4) 58-1/2 in. L x 24 in. W x 5 in. H wire baskets with (5) 24 in. L x 11 in. W x 5 in. H sections. High performance water circulating pump and rear mounted, water-cooled heat exchanger. Strut-assisted top. Prepiped connections. Lifting rack for easy hoist removal. Inlets: (1) 3/4 in. dia. port (cooking media), (1) 3/4 in. dia. NPT (female, jacket), (1) 1-1/2 in. dia. port (cooking media level indicator), (1) 2 in. dia. bevel fitting with hex (heat exchanger water), (1) 3 in. dia. port (cooking media circulation). Outlets: (1) 3/4 in. dia. NPT (female, jacket), (1) 1-1/2 in. dia. port (tank dischage), (1) 2 in. dia. NPT (male, heat exchanger water), (2) 2 in. dia. ports (cooking media circulation). Overall dimensions: 88 in. L x 47 in. W x 49 in. H. ACN840
|
|
Click here for more information (558.6 KB)
|
|
|
Click On Picture
|
Ritter Chopper Mixer Tank- 300 Gallon
|
|
Mfg: Ritter
|
Model:
|
|
Stock No: SPPP684b.13
|
Serial No: 68901683
|
|
Ritter Chopper Mixer Tank- 300 Gallon. Type: 600. S/N: 068901683. Stainless steel. Biro motor : 1.77 hp (1.32 kw), 277/480 V, 5.0/2.5 amps, 60 Hz. (6) Cutting blades: 18-1/2 in. L (each), mixing blade: 16 in. L x 1-1/4 in. W x 29 in. H. Positive displacement pump. Biro motor (pump), 1.20 hp (0.9 kw), 277/480 V, 3.4/2.0 amps, 60 Hz. Container inlet: 31-1/2 in. L x 7-3/4 W x 15 in. H. (2) Removal tank lids. Control panel. Overall dimensions: 50 in. L x 38 in. W x 80 in. H.
|
|
Click here for more information (432.0 KB)
|
|
|
Click On Picture
|
Ritter Chopper Mixer Tank- 300 Gallon
|
|
Mfg: Ritter
|
Model:
|
|
Stock No: SPPP682b.21
|
Serial No: 68901684
|
|
Ritter Chopper Mixer Tank- 300 Gallon. Type: 600. S/N: 068901684. Stainless steel. Biro motor: 1.77 hp (1.32 kw), 277/480 V, 5.0/2.5 amps, 60 Hz. (6) Cutting blades: 18-1/2 in. L (each), mixing blade: 16 in. L x 1-1/4 in. W x 29 in. H. Positive displacement pump, Biro motor (pump), 1.20 hp (0.9 kw), 277/480 V, 3.4/2.0 amps, 60 Hz. Container inlet: 31-1/2 in. L x 7-3/4 W x 15 in. H. Control panel. Overall dimensions: 50 in. L x 38 in. W x 80 in. H.
|
|
Click here for more information (432.1 KB)
|
|
|
Click On Picture
|
Vanmark Peeler/Scrubber/Washer Machine
|
|
Mfg: Vanmark
|
Model: Series 2600
|
|
Stock No: SSLP656b.31
|
Serial No:
|
|
Vanmark Peeler/Scrubber/Washer Machine. Series 2600. Stainless steel body. Spray bar dimensions: 68-1/2 in. L x ½ in. W with 9 holes. Does not have rolls. Open/close doors (manual) on both sides. Feeder dimensions: 11-3/4 in. W x 15 in. H. Water inlet: 1 in. threaded female.This machine is for peeling, washing, and/or scrubbing root crops, vegetables, or fruits. The operator can easily adjust the manual easy-flow discharge gate while observing product the machine. Overall dimensions: 9 ft. 9 in. L x 35-1/2 in. W x 55 in. H.
|
|
Click here for more information (336.3 KB)
|
|
|
Click On Picture
|
AK Robins Screw Cooker
|
|
Mfg: AK Robins
|
Model:
|
|
Stock No: AARF008b.18
|
Serial No:
|
|
AK Robins Screw Cooker. Stainless steel. Top hopper: 30 gallon with screw auger: 36 in L x 4 in diameter. Middle hopper: 20 gallon with screw auger: 48 in. L x 7 in. diameter. Cooking container: 100 gallon with (3) screw augers: 31 in. L x 16 in. diameter. (3) Steam jacket lines with (49) steam inlets: 3 in. threaded male openings. Discharge screw auger: 19-1/2 in L x 4-1/4 diameter. Discharge opening: 4-1/2 in. diameter pipe. Discharge height: 44 in. (3) Motors for the processing screws; (1) motor for discharge screw. Overall dimensions: 18 ft. 6 in. L x 32 in. W x 84 in. H.
|
|
Click here for more information (669.5 KB)
|
|
|
Click On Picture
|
Bizerba-Werke Fully Automated Slicer with Stacking/Shingling Option
|
|
Mfg: Bizerba
|
Model: A406FB
|
|
Stock No: ENDX715b.4a
|
Serial No: 1258071
|
|
Bizerba-Werke Fully Automated Slicer with Stacking/Shingling Option. Model: A406FB. S/N: 1258071. Programmable, continuously variable stroke adjustment from 30 to 55 strokes/minute. Blade diameter 13 inch. Maximum product size (round): 7.08 in. Maximum product size (rectangular): 6.89 in. x 9.45 in. Slice thickness: 0.02-0.47 in. Maximum stacking height: 2.36 in. Blade speed: 266 rpm. Electrical requirements: 120 V, 4.8 amps, 60 Hz, single phase. Overall dimensions: 45 in. L x 31 in. W x 58 in. H. ACN440.
|
|
Click here for more information (578.5 KB)
|
|
|
Click On Picture
|
Univex Mixer-25 Quart, Model MF-20
|
|
Mfg: Univex
|
Model: MF-20
|
|
Stock No: JLRZ001b.5
|
Serial No: 1741
|
|
Univex Mixer-25 Quart. Model: MF-20. S/N: 1741. Stainless Steel Bowl and Accessories. Capable of working at (9) different speeds for light or heavy duty loads, which can also be controlled by a clock timer with a 34-minute maximum limit. Height adjusting lever eases bowl change-out. Double-duty head works as a press and mixer. Grab handle pushes product against a 9 in. dia. impeller. Electrical requirements: 115 VAC, 9.2 amps, 60 Hz. Outlets: (1) 11 in. L x 2-3/4 in. W discharge. Overall dimensions: 43 in. L x 22 in. W x 49 in. H.
|
|
Click here for more information (383.6 KB)
|
|
|
Click On Picture
|
Dino All Stainless Steel Pasta Machine
|
|
Mfg: Dino
|
Model: MKF-3000
|
|
Stock No: DSBI100.17
|
Serial No: 292
|
|
Dino Multi-Pasta Processor System. Model: MKF-3000. S/N: 292. 316 stainless steel. Product enters a blender with a max/min capacity of 1.15/0.62 cu ft. Inside, (6) 8 in. dia. x 14 in. L paddles and (1) 2 in. dia. x 14 in. L screw auger conveys the product into an ante-chamber. Prior to exiting through a 21 in. W x 2-1/2 in. H outlet, the product passes through a hopper then enters a 7 in. dia. x 21 in. L rolling mold shaper. Baldor Industrial Motor: 10 hp, 1725 rpm, 208-230/460 V, 30-28/14 amps, 60 Hz, 3 phase. Sumitomo SM-CYCLO Motor Drive: 87 ratio, 1750 rpm (input), 19.82 rpm (output). Inlets/outlets: (2) 1-1/2 in. dia. Q-line fittings, (2) 2 in. dia. Q-line fittings, (1) 3 in. dia. Q-line fitting. Overall dimensions: 96 in. L x 68 in. W x 88 in. H.
|
|
Click here for more information (406.2 KB)
|
|
|
Click On Picture
|
Toresani Stainless Steel Four Punch Tortellini Machine
|
|
Mfg: Toresani
|
Model: MT265A
|
|
Stock No: DSBI101.17
|
Serial No: 85322
|
|
Toresani Stainless Steel Four Punch Tortellini Machine. Model: MT265 A. Type: 85322. 316 and 304 stainless steel components. Capacity ranges from about 60 lbs/hr to 103 lbs/hr depending on type of noodle desired. Hopper diameter: 9 in. Auger: 5 in. dia x 7 in. L. (2) Top paddles (removable). Press: 10 in. L x 3 in. W. (2) Press rollers: 2-1/2 in. dia. x 10 in. L. Start/stop push buttons for activation. ASEA Motor: 1.1 Kw, 920 rpm, 380-420/220-240 V, 5.7/3.3 amps, 50 Hz, 3 phase. Overall dimensions: 35 in. L x 31 in. W x 61 in. H. (ACN378).
|
|
Click here for more information (1,007.9 KB)
|
|
|
Click On Picture
|
Inline Electric Fryer with Fire Control
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SGMT269.9
|
Serial No:
|
|
Inline Electric Fryer with Fire Control. Inside dimensions: 11 ft. 5 in. L x 13-1/2 in. W x 12 in. H. Maximum tank capacity: 100 gallons. Tank is electrically heated by heater tubes. Infeed hopper dimensions: 19 in. L x 17 in. W. Pressurized grinder feeds into chain conveyor. Chain belt width: 8 in. Fryer features a turn-over mechanism and spray bridge at its mid-section. Turn-over then feeds into outgoing chain conveyor. Height at conveyor outlet: 33 in. Haight Pump, Model: 5D, S/N: 8652781. Leeson Motor, 1/3 hp, 1725/1425 rpm, 115 V, 2.8/3.4-5.6/6.8 FLA, 60/50 Hz, single phase. Dayton Motor, 1/2 hp, 1725 rpm, 115/230 V, 9.6/4.8 FLA, 60 Hz, single phase. Motor drive. Heating elements fuse(s): 600 Volt, 60 amp. Power wire size: 3/8 in. (3 AWG). Neutral wire size: 5/16 in. (6 AWG). Inlets: (1) 7-1/2 in. L x 3-1/2 in. W. Outlets: (1) 10 in. W x 8 in. H (max). Overall dimensions: 12 ft. 3 in. L x 24 in. W x 64 in. H.
|
|
Click here for more information (652.2 KB)
|
|
|
Click On Picture
|
Triumph Countertop Mixer
|
|
Mfg: Triumph
|
Model: N-12
|
|
Stock No: 5.GR785b.1
|
Serial No: 38994
|
|
Triumph Countertop Mixer, Model N-12, 12 quart painted frame countertop mixer. Less stainless steel bowl with mixing paddle. S/N 38994. 1/4 hp 115 volts 1,725 rpm, Date 1972
|
|
|
|
|
Click On Picture
|
Slicer Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 3R-2018Ab.1
|
Serial No:
|
|
Stainless steel slicer, for 1/2 inch cube cut.
|
|
|
|
|
Click On Picture
|
New-Unused DCA Gas Stainless Steel Donut Fryer
|
|
Mfg: DCA
|
Model: RFR 134
|
|
Stock No: HDPH404.4a
|
Serial No: 106
|
|
New-Unused DCA Gas Stainless Steel Donut Fryer. Model: RFR 134. S/N: 106. System requirements: 13.9 kW, 208 V, 50/60 Hz, 3 phase. Oil sump tank dimensions: 3 in. L x 28 in. W x 6-3/4 in. H. Capacity: 21.5 gallons (High level oil), 16 gallons (Low level oil). Oil level indicator. Fryer cover: 36-1/2 in. L x 25 in. W x 1-1/4 in. H. Oil flow valve equipped- 1/4 graduations. Heat regulating switch: 0-400 °F with reset. Indicator lights for heaters 1-3 and hi limit. Overall dimensions: 44 in. L x 41 in. W x 41 in. H.
|
|
Click here for more information (454.0 KB)
|
|
|
Click On Picture
|
New Un-Used DCA Electric Stainless Steel Donut Fryers
|
|
Mfg: DCA Electric
|
Model: RFR124
|
|
Stock No: HDPH185.4
|
Serial No: 282
|
|
New Un-Used DCA Electric Stainless Steel Donut Fryer. Model: RFR124. S/N: 282. Unit requirements: 12.3 kW, 240 V, 50/60 Hz. 3 phase. Features: safety cutoff switch, temperature controlled (temperature range 200-400°F). Frying area: 26 in. L x 25 in. W x 3 in. H with removable SS drain tray, adjustable legs. Lifting heating elements opens up oil pan for easy cleaning. Overall dimensions: 36 in. L x 27-1/2 in. W x 39 in. H. (ACN28).
|
|
Click here for more information (162.8 KB)
|
|
|
Click On Picture
|
New Un-Used 1994 DCA Electric Stainless Steel Donut Fryer
|
|
Mfg: DCA
|
Model: RFR 134
|
|
Stock No: HDPH405b.4a
|
Serial No: 105
|
|
New Un-Used 1994 DCA Electric Stainless Steel Donut Fryer. Model: RFR 134. S/N: 105. Electrical requirements: 13.9 kW, 208 V, 60/60 Hz, 3 phase. Oil sump tank dimensions: 34 in. L x 25-1/4 in. W x 7 in. H. Capacity: 20.5 gallons (high level), 16.5 gallons (low level). Oil level indicator. Fryer cover: 36-1/2 in. L x 25 in. W x 1-1/4 in. H. Oil flow valve equipped; 1/4 graduations. Heat regulating switch: 0-400 °F with reset. Indicator lights for heaters 1-3 and hi limit. Overall dimensions: 37-1/2 in. L x 33 in. W x 41 in. H.
|
|
Click here for more information (499.3 KB)
|
|
|
Click On Picture
|
New Un-Used DCA Gas Stainless Steel Donut Fryer
|
|
Mfg: DCA
|
Model: RFR 134
|
|
Stock No: HDPH406.4a
|
Serial No: 111
|
|
New Un-Used DCA Gas Stainless Steel Donut Fryer. Model: RFR 134. S/N: 111. Unit specifications: 13.9 kW, 208 V, 50/60 Hz, 3 phase. Oil sump tank dimensions: 3 in. L x 28 in. W x 6-3/4 in. H. Capacity: 21.5 gallons (High level oil), 16 gallons (Low level oil). Oil level indicator. Fryer cover: 36-1/2 in. L x 25 in. W x 1-1/4 in. H. Oil flow valve equipped; 1/4 graduations. Heat regulating switch: 0-400 °F with reset. Indicator lights for heaters 1-3 and hi limit. Overall dimensions: 44 in. L x 41 in. W x 41 in. H.
|
|
Click here for more information (307.5 KB)
|
|
|
Click On Picture
|
New Un-Used DCA Electric Stainless Steel Donut Fryers
|
|
Mfg: DCA Electric
|
Model: RFR124
|
|
Stock No: HDPH185B.4
|
Serial No: 270
|
|
New Un-Used DCA Electric Stainless Steel Donut Fryer. Model: RFR124. S/N: 270. Unit requirements: 12.3 kW, 240 V, 50/60 Hz. 3 phase. Features: safety cutoff switch, temperature controlled (temperature range 200-400°F). Frying area: 26 in. L x 25 in. W x 3 in. H with removable SS drain tray, adjustable legs. Lifting heating elements opens up oil pan for easy cleaning. Overall dimensions: 36 in. L x 27-1/2 in. W x 39 in. H. (ACN28).
|
|
Click here for more information (163.3 KB)
|
|
|
Click On Picture
|
1995 DCA Gas Operated Donut Fryer
|
|
Mfg: DCA
|
Model: RFG334 DE
|
|
Stock No: HDPH482.4a
|
Serial No: 118
|
|
1995 DCA Gas Operated Donut Fryer. Model: RFG 334 DE. S/N: 118. System requirements: 120 V, 50/60 Hz, single phase. Temperature controlled (temperature range: 200-390°F). Frying area: 34 in. L x 24 in. W x 8 in. H. Capacity: 23 gallons (high level), 19.4 gallons (low level). Safety gas cutoff valve. Outlets: (1) 1 in. diameter discharge. Overall dimensions: 48 in. L x 43 in. W x 61 in. H.
|
|
Click here for more information (145.7 KB)
|
|
|
Click On Picture
|
Stainless Steel Double-Action Mixer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNSL007.3a
|
Serial No:
|
|
Stainless Steel Double-Action Mixer. Tilting capability. Can hold a container that is 24 in. dia. x 32 in. H. Mixer is equipped with a shear propeller mounted to a 13 in. H. shaft and a dispersing propeller on a 14 in. H. shaft. Base has (4) casters for easy positioning. Final propeller speeds for shear/dispersing propellers: 1150/354 rpm. Baldor Industrial Motor, 2 hp, 1725 rpm, 206-230/460 V, 6.5-6.2/3.1 amps, 60 Hz, 3 phase. Overall dimensions: 38 in. L x 22 in. W x 42 in. H.
|
|
Click here for more information (272.5 KB)
|
|
|
Click On Picture
|
1994 DCA Stainless steel Gas Fryer
|
|
Mfg: DCA
|
Model: RFG 324 DE
|
|
Stock No: SGMT264.9
|
Serial No: 566
|
|
1994 DCA Stainless steel Gas Fryer. Model: RFG 324 DE. S/N: 566. (6) Heat tubes: 24 in. L x 2 in. diameter. 75,000 BTU/Hr rating. Container: 24 in. L x 24 in. W x 7-1/2 in. H. Container oil capacity: 16 gallons for high level, 13.5 gallons for low level. (15) Fryer screens: 23 in. x 23 in. Mesh: 0.20 in. Open flow control: 1/4 in., 1/2 in., 3/4 in. and close. Controls: 120 V, 50/60 Hz, single phase. Portable table dimensions and fryer cover: 30 in. x 29 in. Inlet gas: (1) 1 in. threaded female. Steam outlet: 16-1/2 in. x 3-3/4 in., Overall dimensions: 43 in. L x 31 in. W x 60 in. H.
|
|
Click here for more information (207.0 KB)
|
|
|
Click On Picture
|
1995 DCA Gas Fryer
|
|
Mfg: DCA
|
Model: RFC 334 DE
|
|
Stock No: SGMT265.9
|
Serial No: 113
|
|
1995 DCA Gas Fryer. Model: RFC 334 DE. S/N: 113. Stainless steel. (8) Heat tubes: 24 in. L x 2 in. diameter. Container: 24 in. L x 34 in. W x 7-1/2 in. H. Container oil capacity: 23 gallons for high level, 19.5 gallons for low level. (2) Fryer screens: 23 in. x 33 in. Screen mesh: 0.20 in. Flow control valve with four settings: ¼ in., ½ in., ¾ in. and close. Controls: 120 V, 50/60 Hz, 1 phase. Switch on/off, reset button, manual temperature controller: 390°F to 200°F. Portable table dimensions and fryer cover: 28 in. x 29-1/2 in. Inlet gas: 1 in. threaded male. Steam outlet dimensions: 3-3/4 in. x 16-1/2 in. Overall dimensions: 44 in. L x 41 in. W x 61 in. H.
|
|
Click here for more information (320.9 KB)
|
|
|
Click On Picture
|
Inline Electric Fryer with Fire Control
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SGMT517.2a
|
Serial No:
|
|
Inline Electric Fryer with Fire Control. Inside dimensions: 11 ft. 5 in. L x 13-1/2 in. W x 12 in. H. Maximum tank capacity: 100 gallons. Tank is electrically heated by heater tubes. Chain belt width: 8 in. Fryer features a turn-over mechanism and spraybridge at its mid-section. Turn-over then feeds into outgoing chain conveyor. Height at conveyor outlet: 33 in. Haight Pump, Model: 5D, S/N: 8652781. Leeson Motor, 1/3 hp, 1725/1425 rpm, 115 V, 2.8/3.4-5.6/6.8 FLA, 60/50 Hz, single phase. Dayton Motor, 1/2 hp, 1725 rpm, 115/230 V, 9.6/4.8 FLA, 60 Hz, single phase. Motor drive. Inlets: (1) 7-1/2 in. L x 3-1/2 in. W. Outlets: (1) 10 in. W x 8 in. H (max). Overall dimensions: 12 ft. 3 in. L x 24 in. W x 64 in. H.
|
|
Click here for more information (222.9 KB)
|
|
|
Click On Picture
|
Fedco Systems Topping Applicator
|
|
Mfg: Fedco Engineering Systems
|
Model: 40
|
|
Stock No: HDNP192.12a
|
Serial No: 148
|
|
Fedco Systems Topping Applicator. Model: 40. S/N: 148. Unit consists of an 8-1/2 in. dia. x 47-1/2 in. L drum with (52) 1/8 in. grooves that are spaced at a distance of 1/2 in. Clearance between drums and base: 3/8 in. Designed to slide lengthwise on track. Hopper infeed dimensions: 43 in. L x 23 in. W. Hopper discharge dimensions: 32 in. L x 1-1/2 in. W. Control Panel operates the DC motors. Baldor DC Motor (drum), 1/3 hp, 1750 rpm, 90/100/50 V, 3.7/0.4/0.8 amps. Baldor AC Motor (cleaning blades), 1/2 hp, 1725 rpm, 115/208-230 V, 6/2.3-3 amps, 60 Hz, single phase. Overall dimensions: 77-1/2 in. L x 40-1/2 in. W x 26-1/2 in. H.
|
|
Click here for more information (147.7 KB)
|
|
|
Click On Picture
|
Fedco Stainless Steel Topping Applicator
|
|
Mfg: Fedco Engineering Systems
|
Model:
|
|
Stock No: HDNP210Cb.6
|
Serial No:
|
|
Fedco Stainless Steel Topping Applicator. Has two agitators with drives. Hopper/agitator assembles slide length wide on track. Hopper dimensions (inside) 12 in. W, 32 in. L, 18 in. H. (Curved bottom). Has two on/off switches, on for each drive. Upper agitator switch runs straight to the motor. Lower agitator switch runs to Allen Bradley control drive, then to the motor. Control Drive: Bulleting 1333 Adjustable frequency AC Motor Drive. Allen Bradley, Cat No. 1333-AAB, Ser: B, S/N B17355, Input (3 phase) 460 volt, 50/60 Hz, 2.6 KVA, 3.3 amps. Output (3 phase): 460 volt, 60 Hz, 1.7 KVA, 2.1 amps. Dimensions of frame: 38 in. W, 85-½ in. L, 35 in. H. Overall dimensions: 38 in. W, 85-½ in. L, 51-½ in. H.
|
|
Click here for more information (227.1 KB)
|
|
|
Click On Picture
|
Rotary Fryer
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DBPF2087.1
|
Serial No:
|
|
Rotary Fryer. Drum dimensions: 28 in. dia. x 14 in. W. Sump tank dimensions: 30-1/2 in. L x 16-1/2 in. W x 17 in. H. Maximum oil capacity: 35 gal. Baldor Motor, 1/2 hp, 1725 rpm, 230/460 V, 4.5/1.8 amps, 60 Hz, 3 phase. Motordrive. Hydraulic Torqmotor. Inlets: (1) 1-1/2 in. dia. FNPT, (2) 2 in. dia. ports. Outlets: (1) 1-1/2 in. dia. I-line fitting, (1) 4 in. dia. S-line fitting, (1) 6 in. W x 3 in. H discharge. Overall dimensions: 59 in. L x 58 in. W x 62 in. H.
|
|
Click here for more information (234.9 KB)
|
|
|
Click On Picture
|
Pama Roma Extruder
|
|
Mfg: Pama Roma
|
Model:
|
|
Stock No: SAPM031.2
|
Serial No:
|
|
Pama Roma Extruder. 3-compartment blender for efficient batch transfer. Outside compartments min/max capacity: 275/804 cu. in. Middle compartment min/max capacity: 53/154 cu. in. Number of paddles: 10. Paddle dimensions: 3 in. L x 1-1/2 in. W. Extruder diameter: 4 in. Number and size of perforations: (30) 1/8 in. dia. Mezmohelnice Motor, 1.1 kW/1.5 hp, 1,410 rpm, 380/220 V, 2.8-4.8 amps. Bonfiglioli Motor Drive, 1:23 ratio, 74.34 rpm (final). Inlets: (1) 19-1/2 in. L x 12-1/2 in. W infeed, (2) 1/4 in. dia. barb fittings (vacuum), (2) 4 in. W x 2 in. H side entry doors. Outlets: Extruder. Overall dimensions: 26 in. L x 25 in. W x 58 in. H.
|
|
Click here for more information (343.8 KB)
|
|
|
Click On Picture
|
Hatco Bain Marie Table
|
|
Mfg: Hatco
|
Model: FR-6
|
|
Stock No: EEGC035.a
|
Serial No: 4100639501
|
|
Hatco Bain Marie Table. Model: FR-6. S/N: 4100639501. Inside dimensions: 24 in. L x 18 in. W x 18 in. H. Equipped with variable temperature knob: 120 F min/ 200 F max. Hatco water heater electrical requirements: 25 Vac, 30 amps, 3 phase, 6.3 Kw. Moves on (4) casters for easy positioning. Inlets/outlets: (2) 1-1/2 in. hot water inlet/outlet, (1) 3/4 in. water inlet. Overall dimensions: 31 in. L x 29-1/2 in. W x 40 in. H.
|
|
Click here for more information (205.4 KB)
|
|
|
Click On Picture
|
Cecilware 2-Basket Fryer
|
|
Mfg: Cecilware
|
Model: FMS30
|
|
Stock No: EECS028.a
|
Serial No: 430870
|
|
Cecilware 2-Basket Fryer, Model FMS30, S/N 430870, gas fired.
|
|
|
|
|
Click On Picture
|
Cecilware 2-Basket Fryer
|
|
Mfg: Cecilware
|
Model: FMS30
|
|
Stock No: EECS029.a
|
Serial No: 430846
|
|
Cecilware 2-Basket Fryer, Model FMS30, S/N 430846, gas fired.
|
|
|
|
|
Click On Picture
|
Frymaster 2-Basket Fryer
|
|
Mfg: Frymaster
|
Model: MJCFSD
|
|
Stock No: EECS030.a
|
Serial No: 9909HA0054
|
|
Frymaster 2-Basket Fryer, Model MJCFSD, S/N 9909HA0054, gas fired.
|
|
|
|
|
Click On Picture
|
Wash/Inspection Station
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DPFI407.2
|
Serial No:
|
|
Wash/Inspection Station. Stainless steel. Wall-mount unit with push pedal activation. Inside dimensions: 72 in. L x 16 in. W x 9 in. H. Inlets: (1) 3/4 in. dia. pipes, (1) 1 in. dia. pipe. Outlet: (1) 2 in. dia. pipe. Overall dimensions: 73 in. L x 23 in. W x 25 in. H.
|
|
|
|
|
Click On Picture
|
Wash Sink/Table
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DPFI309.a
|
Serial No:
|
|
Wash Sink 2 ft. x 2 ft. Table 5 ft. L. Table 2 ft. L. Stainless steel.
|
|
|
|
|
Click On Picture
|
New Stainless Steel Baking Racks
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDPH411.a
|
Serial No:
|
|
(36) New Stainless Steel Baking Racks. 26 in. L x 16 in. W.
|
|
|
|
|
Click On Picture
|
New Stainless Steel Baking Racks
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: HDPH411A.1
|
Serial No:
|
|
(66) New Stainless Steel Baking Racks. 26 in. L x 16 in. W.
|
|
|
|
|
Click On Picture
|
Bakers Aid Portable Stainless Steel Reservoirs
|
|
Mfg: Bakers Aid
|
Model:
|
|
Stock No: HDPH607b.1a
|
Serial No:
|
|
Bakers Aid Portable Stainless Steel Reservoirs with Haight 1/3 hp Mounted Pump. 26 in. L x 13 in. W x 13 in. D.
|
|
|
|
|
Click On Picture
|
Bakers Aid Portable Stainless Steel Reservoirs
|
|
Mfg: Bakers Aid
|
Model:
|
|
Stock No: HDPH608b.1a
|
Serial No:
|
|
Bakers Aid Portable Stainless Steel Reservoirs with Haight 1/3 hp Mounted Pump. 26 in. L x 13 in. W x 13 in. D.
|
|
|
|
|
Click On Picture
|
Bakers Aid Portable Stainless Steel Reservoirs
|
|
Mfg: Bakers Aid
|
Model:
|
|
Stock No: HDPH609b.1a
|
Serial No:
|
|
Bakers Aid Portable Stainless Steel Reservoirs with Haight 1/3 hp Mounted Pump. 26 in. L x 13 in. W x 13 in. D.
|
|
|
|
|
Click On Picture
|
Baker's Aid Kwik Thaw Proofer
|
|
Mfg: Bakers Aid
|
Model: BAP-1-RI-RT-RH
|
|
Stock No: SGMP011.8
|
Serial No: 90-2052-11
|
|
Baker's Aid Kwik Thaw Proofer. Model: BAP-1-RI-RT-RH, S/N: 90-2052-11. Stainless steel. Temperature range: 0-180 °F. Electrical: 208/220 V, 1 phase, 60 Hz; 110/115 V, 1 phase, 60 Hz. Single door. Inside dimensions: 30 in. L x 27 in. W x 71 in. H. Overall dimensions: 35 in. L x 32.5 in. W x 89 in. H.
|
|
Click here for more information (145.4 KB)
|
|
|
Click On Picture
|
SOLD Stein Fryer
|
|
Mfg: Stein
|
Model:
|
|
Stock No: 550.423
|
Serial No:
|
|
|
|
Click On Picture
|
SOLD Hobart Food Chopper
|
|
Mfg: Hobart
|
Model: Vcm-40
|
|
Stock No: NGMS123.8
|
Serial No: U76-25459
|
|
Hobart Food Chopper. Model Vcm-40. S/N U76-25459.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Holac Meat Dicer
|
|
Mfg: Holac
|
Model: RA121
|
|
Stock No: DSBI098b.5a
|
Serial No: 2202705
|
|
Holac Meat Dicer. Model RA121. S/N 2202705.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Hobart Vertical Cutter/Mixer
|
|
Mfg: Hobart
|
Model: VCM-40
|
|
Stock No: DSBI147b.11a
|
Serial No:
|
|
Hobart Cutter/Mixer. Model: VCM-40. Unit features a 3-position motor controller (OFF-LOW-HIGH) manual rotary-type drum switch that is mechanically interlocked with bowl cover. Low speed is used for general cutting and mixing while high speed is used for emulsifying, pureeing pulverizing and crumbing. A motor, mounted beneath the bowl, supplies power directly to the cutting/mixing knives. The scimitar knives are at a fixed angle. Rotating at high speed, they pull the product down through the central portion of the bowl, slicing it in the process. The product is then returned up the sides of the bowl by centrifugal force. A vortex is created inside the bowl, which keeps the entire load in motion. When cutting certain products the action is supplemented by a hand operated mixing baffle. The Hobart bowl is tubular base-mounted and is available with a bowl inspection cover. Inlets/outlets: 20 in. dia. bowl opening. 2-Speed Motor: 7.5/10.5 hp, 1750/3500 rpm, 200-230/460 V, 60 Hz, 3 phase. Overall dimensions: 37 in. L x 27 in. W x 46 in. H.
SOLD
|
|
Click here for more information (197.4 KB)
|
|
|
Click On Picture
|
SOLD Stainless Steel Double Sink
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: EEGC206.1
|
Serial No:
|
|
Stainless Steel Double Sink. 55 in. L x 28 in. H
SOLD
|
|
|
|
|
Click On Picture
| | |
