|
|
Click On Picture
|
Sahara Drum Warming Oven
|
|
Mfg: Sahara
|
Model: 6E8-1S
|
|
Stock No: DNBA213
|
Serial No: J129098
|
|
Sahara Drum Warming Oven. Model: 6E8-1S. S/N: J129098. Inside floor spacing: 6 in. Oven entrance height: 1 ft. 3 in. Open/closed door sensor. Blower fan inlet dimensions: 10 in x 10 in. Baldor Indusrial Electric Motor, HP: .33, RPM: 3450, AMPS: 1.5-1.4-.7, Hz: 60, 3 phase. Oven inside dimensions: 9 ft. 3-1/2 in. L x 4 ft. 6in. W, x 4 ft. H. Overall Dimensions: 10 ft. 10 in. L x 5 ft. 6 in. W x 7 ft. 2 in. H.
|
|
Click here for more information (213.9 KB)
|
|
|
Click On Picture
|
Graco Pneumatic Bulldog J91E Drum Pump
|
|
Mfg: Graco
|
Model: J91E
|
|
Stock No: DNBA039
|
Serial No: W-108
|
|
Graco Pneumatic Bulldog Pump. Model: J91E. S/N: W-108. P/N: 954-409. Ratio: 10 to 1. Key applications: fluid transfer and supply. Luftmotor airmotor. Model: 625-794. Series: F01A. P/N: 949444. Plate diameter: 21-1/2 in. dia. Inlets: (1) 3-1/2 in. dia. port (product in), (1) 1/4 in. dia. male quick connect (air inlet). Outlets: (1) 2 in. dia. bevel seat (product out), (1) 1-1/2 in. dia. port (muffler). Overall dimensions: 6 ft. L x 4 ft. W x 5 ft. 11 in. H.
|
|
Click here for more information (333.4 KB)
|
|
|
Click On Picture
|
1998 Colborne Pneumatic Piston Transfer Pump
|
|
Mfg: Colborne
|
Model: TP342700
|
|
Stock No: DNBA212
|
Serial No: 1334-98
|
|
1998 Colborne Pneumatic Piston Transfer Pump. Model : TP342700. S/N: 1334-98. Order No. 14844. Stainless Steel (304) construction. This pump will gently pump up to 40 gallons of batters, icings and fillings per minute. Accommodates most sizes of mixing bowels, raises , lowers and holds at any height. Unit has large, easy roll casters with brakes. Inlets: (1) 3/4 in. dia. male quick connect fitting, (1) 3 in. dia. S-line fitting. Outlets: (1) 1 in. dia. port. (exhaust), (1) 3 in. dia. S-line fitting. Overall dimensions: 3 ft. 2 in. L x 3 ft. 3 in. W x 7 ft. 2 in. H.
|
|
Click here for more information (107.4 KB)
|
|
|
Click On Picture
|
Stainless Steel COP Tank-300 Gallon
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DNBA026
|
Serial No:
|
|
Stainless Steel COP Tank-300 Gallon. Inside straight-wall dimensions: 12 ft. 2 in. L x 2 ft. 1 in. W x 1 ft. 9-1/2 in. H. (36) 1/2 in. dia. spray ports. Sanitary Centrifugal Pump. Model: 3 x 2-1/2 DCH2. S/N: CC-17552-1-2. Impeller diameter: 6-1/2 in. Baldor Industrial Motor, 15 hp, 3500 rpm, 230/460 V, 37/18.5 amps, 60 Hz, 3 phase. Inlets: (2) 2 in. dia. S-line fittings (media), (1) 12 ft. 2 in. L x 2 ft. W. (top infeed). Outlets: (1) 2 in. dia. S-line fittings, (1) 3 in. dia. S-line fittings. Overall dimensions: 12 ft. 5 in. L x 2 ft. 6 in. W x 3 ft. 6 in. H.
|
|
Click here for more information (242.0 KB)
|
|
|
Click On Picture
|
Stainless Steel Frame Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DNBA049
|
Serial No:
|
|
(3) Stainless Steel Frame Belt Conveyor. Conveyor belt: Maximum aperture/clearance: 10 in. W x 7 in. H. Belt Dimension: 8 in. W x 2 ft 11 in. L. Baldor Industrial Electric Motor, 1/2 HP, 1725 RPM, 230/460 V, 1.5 AMPS, 60 Hz, 3 phase. Hub City gear reducer. Infeed/exit height: 4 ft. 6 in. Overall dimensions: 3 ft. L x 2 ft. 6 in. W x 5 ft. 4 in. H.
|
|
Click here for more information (269.9 KB)
|
|
|
Click On Picture
|
Ampco Sanitary Centrifugal Pump
|
|
Mfg: Ampco
|
Model: 4 x 3 DC2
|
|
Stock No: DNBA083
|
Serial No: CC-23267-1-1
|
|
Ampco Sanitary Centrifugal Pump. Model: 4 x 3 DC2. S/N: CC-23267-1-1. Impeller dia: 5.125 in. Baldor Industrial Motor, 10 hp, 3450 rpm, 230/460 V, 24/12 amps, 60 Hz, 3 phase. Inlets : (1) 4 in. dia. S-line fitting. Outlets: (1) 3 in. S-line fitting. Overall dimensions: 2 ft. 1in. L x 1 ft. 5 in. W x 1 ft. 4 in. H.
|
|
Click here for more information (65.9 KB)
|
|
|
Click On Picture
|
Tefc 75 HP Motor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: CCELL05
|
Serial No:
|
|
(2) Tefc 75 HP motor to drive compressor
|
|
|
|
|
Click On Picture
|
Tefc 65 HP Motor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: CCELL04
|
Serial No:
|
|
Tefc 65 HP motor to drive compressor
|
|
|
|
|
Click On Picture
|
Mycom Compressor
|
|
Mfg: Mycom
|
Model: N4B
|
|
Stock No: CCELL03
|
Serial No:
|
|
Mycom Compressor. Model: N4B.
|
|
|
|
|
Click On Picture
|
Mycom Compressor
|
|
Mfg: Mycom
|
Model: N4B
|
|
Stock No: CCELL02
|
Serial No:
|
|
Mycom Compressor. Model: N4B.
|
|
|
|
|
Click On Picture
|
Mycom Compressor
|
|
Mfg: Mycom
|
Model: N4B
|
|
Stock No: CCELL01
|
Serial No:
|
|
Mycom Compressor. Model: N4B.
|
|
|
|
|
Click On Picture
|
A-One Workhorse Line Conveyor System
|
|
Mfg: A-One Manufacturing Co.
|
Model: A-33-14
|
|
Stock No: DNBA058
|
Serial No: 22093-2
|
|
A-One Workhorse Line Conveyor System. Model: A-33-14. S/N: 22093-2. Belt width : 2 ft. 10 in. Maximum aperture/clearance above belt: 1 ft. 5 in. H x 2 ft. 10 in. W. (7) Rollers dimension: 2 ft. 10 in. L. Baldor Industial Electric Motor, Hp: 1, RPM: 1740, 230 - 460 V, AMPS: 2.8 - 1.4, Hz: 60, 3 phase. Falk Enclosed Gear Drive, Model: 1060 FZ4A, Ratio: 508.1, Input rpm: 1750, Output rpm: 3.44. Infeed/exit height: 6 ft. 5 in. Overall dimensions: 14 ft. L x 10 in. L x 5 ft. W x 7 ft. 9 in. H.
|
|
Click here for more information (287.7 KB)
|
|
|
Click On Picture
|
Sani-Matic Stainless Steel COP Tank- 450 Gallon
|
|
Mfg: Sani-Matic
|
Model: SWJ-450
|
|
Stock No: DNBA073
|
Serial No: 180447
|
|
Sani-Matic Systems Sanitation Equipment Stainless Steel COP Tank- 450 Gallon. Model: SWJ-450. S/N: 180447. P.O. No.127662. Inside straight-wall dimensions: 8 ft. 3 in. L x 3 ft. W x 2 ft. 4 in. H. (36) 1/4 in. dia. spray ports. Inlets: (4) 1-1/2 in. dia. S-line fittings (media), 8 ft. 3 in. L x 3 ft. W (top infeed). Outlets: (1) 3 in. dia. S-line fitting, (1) 1 in. dia. NPT fitting. Overall dimensions: 9 ft. L x 3 ft. 8 in. W x 3 ft. 6 in. H.
|
|
Click here for more information (183.3 KB)
|
|
|
Click On Picture
|
Texwrap Belt Conveyor Wrapping System
|
|
Mfg: Texwrap Packaging Systems
|
Model: 2201SS
|
|
Stock No: DNBA071
|
Serial No: S1066
|
|
Texwrap Belt Conveyor Wrapping System. Model: 2201SS. S/N:S1066. Belt width No.1 : 1 ft. 5-1/2 in. Belt width No.2 : 1 ft. 3 in. Belt width No.3 : 1 ft. 9-1/2 in. Maximum aperture/clearance above belt: 1 ft. 8 in. W x 3 in. H. Air supply: 80 psi. Air flow: 4 cfm. Power supply: 115 V, 15 amps, single phase. Control power supply: 24 VDC. Digtal 6 in. display. Roller No.1: 4 ft. 9 in. L x 2 in. dia. Roller No.2: 2 ft. 6 in. L x 3-1/2 in. dia. Roller No.3: 2 ft. 4-1/2 in. L x 1-1/4 in. dia. Roller No.4: 6 in. L x 1-1/2 in. dia. (4) Text Wrap Electric Motors, 1/7 hp, 2500 rpm,125 rpm (final), 90 VDC, 1.4 amps, 1 phase, ratio: 20. Baldor Electric Motor, 1/3 hp, 1750 rpm, 116 rpm (final), 90 VDC, 32 amps, ratio 15. Infeed/exit height: 2 ft. 11 in. Overall dimensions: 12 ft. L x 4 in. L x 6 ft. 4 in. W x 4 ft. 11 in. H.
|
|
Click here for more information (554.5 KB)
|
|
|
Click On Picture
|
1998 Sandiacre Single Tube Intermittent Motion Vertical Bag Maker
|
|
Mfg: Sandiacre Packaging Machinery Ltd.
|
Model: TG400LX
|
|
Stock No: DNBA084
|
Serial No: 2250
|
|
1998 Sandiacre Single Tube Intermittent Motion Vertical Bag Maker. Model: TG400LX. SN: 2250. Machine features simple and fast bag size changeover with one-piece forming sets. Power supply: 20 amps, 3 phase. Operating pressure: 80 psi. Bag dimensions: 4.7 in to 15.7 in W x 23.6 in. L on single pull. Roller bar dimensions: 3 in. dia. x 3 ft. 6 in. L. Allen Bradley AC Drive. Catalog No. 1305-BA03A. Motor rating: 1 hp. Input: 380-40 V, 2.2 amps, 50/60 hz. Output: 380-460 V, 2.3 amps, 0-400 Hz. Simplatrol Electric Motor, 1 hp, 220/380 V, 3.52 amps, 50/60 Hz, 3 phase. Infeed height: 6 ft. 10 in. Exit height: 3 ft. 5 in. Overall dimensions: 7 ft. 8 in. L x 6 ft. W x 7 ft. 2 in. H.
|
|
Click here for more information (521.3 KB)
|
|
|
Click On Picture
|
1990 Hoppman FT-50 Centrifugal Feeder
|
|
Mfg: Hoppmann
|
Model: FT-50
|
|
Stock No: DNBA053
|
Serial No: 12832 and 12831
|
|
(2) 1990 Hoppman Centrifugal Feeders. Model: FT-50. S/N's:12832 and 12831. Inside dimensions: 1 ft. 1-1/2 in. L x 11-1/2 in. W x 11-1/2 in. H. Bowl diameter: 4 ft. 6-1/2 in. dia. x 10-1/2 in. H. Drum diameter: 3 ft. 11 in. Maximum object size: 3 in. W x 4-1/2 in. H. Baldor Electric Motor, .75 hp, 1750 rpm, 90 V. Baldor Speed Reducer, ratio: 10, 175 rpm (final). Includes reject mechanism with low level limit switch. Inlets: (1) 4 ft. infeed. Outlets: (1) 6-1/2 in. L x 4 in. W discharge, (2) 11 in. L x 10 in. W discharge. Outside dimensions: 7 ft. L x 6 ft. 10 in. W x 8 ft. 4 in. H.
|
|
Click here for more information (704.2 KB)
|
|
|
Click On Picture
|
Moline Company Dough Sheeter - 3 ft. 8 in Wide
|
|
Mfg: Moline Co.
|
Model: 10-44-S
|
|
Stock No: DNBA052
|
Serial No: 10-90-286
|
|
Moline Company Dough Sheeter - 3 ft. 8 in Wide. Model: 10-44-S. S/N: 10-90-286. Roller width: 3 ft. 8 in. Maximum aperture/clearance above roller: .625 in. H x 3 ft. 8 in. W. Baldor Electric Motor, 1-1/2 hp, 1140 rpm, 5.0/2.5 amps, 60 Hz, 3 phase. Leeson Electric Motor, 1 hp, 1140 rpm, 2.5 amps, Infeed/exit height: 3 ft. 11 in. Overall dimensions: 6 ft. L x 6 in. L x 3 ft. 1 in. W x 6 ft. 7 in. H.
|
|
Click here for more information (316.1 KB)
|
|
|
Click On Picture
|
1995 Air Technology Systems Inc. Dehumidfier
|
|
Mfg: Air Technology Systems Inc.
|
Model: DES-600-40-E
|
|
Stock No: DNBA032
|
Serial No:
|
|
1995 Air Technology Systems Inc. Dehumidfier. Model: DES-600-40-E. S/N: 9504219. Job No: D11886. Conditioned air quantity: 600 cfm. Reactivation and process air inlets have removable air filters. Power supply: 460 V, phase: 3. Hz: 60. FLA: 19. Wires: 3 plus ground. Reactivation Heat: 12Kw. Reactivation motor: .7 FLA. Process Motor: 2.3 FLA. (2) Maghelic Gauges range: 0-2 inches of water. (2) Baldor Industrial Electric Motor, HP: 1. RPM: 3450. AMPS 3.6/1.8. 3 phase, Blower information: Manual adjustable slide gate. Blower suction size: 6 in. Blower discharge size: 6 in. Baldor Industrial electric Motor, HP: 1. RPM: 3450, AMPS: 3.6/1.8. 3 Phase. Flex hose included. Inlets/Outlets: Process inlet 11-1/2 in. W x 1 ft. 1/2 in. H. Process outlet: 6 in. dia. Reactivation air inlet: 9 in. W x 9 in. H. Reactivation outlet: 6 in. W x 6 in. H. Overall dimensions: 4 ft. 2-1/2 in. L x 2 ft. 10-1/2 in. W x 5 ft. 11-1/2 in. H.
|
|
Click here for more information (388.0 KB)
|
|
|
Click On Picture
|
1998 3M-Matic 700a Case Sealer System
|
|
Mfg: 3M-Matic
|
Model: 39600
|
|
Stock No: DNBA013
|
Serial No: 9519
|
|
1998 3M-Matic 700a Case Sealer System. Model: 39600. S/N: 9519. Taping Heads is designed to apply ScotchTM brand pressure-sensitive film box sealing tape to the top and bottom center seam of regular slotted containers. The 700a is manually adjustable to a wide range of box sizes from 6 in. L x 6 in W x 4-3/4 H, to Unlimited L x 21-1/2 W x 24-1/2 in H. Power supply: 115 V, 3.8 amps, 60 Hz. (2) Bodine Electric Drives, 1/5 hp, 1700 rpm, 60 Hz, 1.9 amps, single phase. Conveyor dimensions: 2 ft. 11 in. L x 5 in. W. Conveyor infeed/exit height: 2 ft.1 in. Overall Dimensions: 3 ft. 4 in. L x 3 ft. 3 in. W x 4 ft. 11 in. H.
|
|
Click here for more information (204.4 KB)
|
|
|
Click On Picture
|
Roots Rotary Lobe Blower - 5 hp
|
|
Mfg: Roots
|
Model: 53-U-RAI
|
|
Stock No: MDBC275A
|
Serial No: 0706949868
|
|
Roots Rotary Lobe Blower - 5 hp. Model: 53-U-RAI. S/N: 0706949868.
|
|
|
|
|
Click On Picture
|
Ice Builder
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC275
|
Serial No:
|
|
Ice Builder. w Receiver and Valves. 8'7" W x 7'4" H x 18'7" L.
|
|
|
|
|
Click On Picture
|
Loc Ice Builder
|
|
Mfg: Loc
|
Model: FM750
|
|
Stock No: MDBC274
|
Serial No: 814
|
|
|
|
Click On Picture
|
Ammonia Accumulator
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC270
|
Serial No:
|
|
Ammonia Accumulator. w Transfer Tank. w Valves.
|
|
|
|
|
Click On Picture
|
Hansen Auto Purger
|
|
Mfg: Hansen Technologies
|
Model: AP08
|
|
Stock No: MDBC269
|
Serial No: D133
|
|
Hansen Auto Purger. Model: AP08. S/N: D133.
|
|
|
|
|
Click On Picture
|
Baldor Motor - 25 hp
|
|
Mfg: Baldor
|
Model:
|
|
Stock No: MDBC266A
|
Serial No:
|
|
Imeco Condenser Spare Motors by Baldor 25 hp, 1760 RPM
|
|
|
|
|
Click On Picture
|
Poly Bags
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC216.a
|
Serial No:
|
|
|
|
Click On Picture
|
2-Door Steel Storage Cabinet
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC187.1
|
Serial No:
|
|
2-Door Steel Storage Cabinet with Lock-Out Electric Safety Supplies with Board
|
|
|
|
|
Click On Picture
|
APV and Crepaco Centrifugal Pump Parts
|
|
Mfg: APV Crepaco
|
Model:
|
|
Stock No: MDBC161.1
|
Serial No:
|
|
Assorted APV and Crepaco Centrifugal Pump Parts including Backplates, Housings, Covers, Gasket Kits with (2) 3 hp Pump Motors
|
|
|
|
|
Click On Picture
|
Resin Pallets
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: MDBC160.1
|
Serial No:
|
|
(4) Resin Pallets. 39" x 32" and 56" x 44"
|
|
|
|
|
Click On Picture
|
APV Centrifugal Pump - 5 hp
|
|
Mfg: APV
|
Model: 6V2
|
|
Stock No: MDBC121.1a
|
Serial No: H-5674-94
|
|
APV Centrifugal Pump - 5 hp. Model: 6V2. S/N: H-5674-94. 2" x 1.5" Threaded S/S Head, 1730 RPM Motor
|
|
|
|
|
Click On Picture
|
APV Centrifugal Pump - 5 hp
|
|
Mfg: APV
|
Model: 6V2
|
|
Stock No: MDBC120.1a
|
Serial No:
|
|
APV Centrifugal Pump - 5 hp. Model: 6V2. 2" x 1.5" Threaded S/S Head, 1730 RPM Motor
|
|
|
|
|
Click On Picture
| | |
