Used Food Processing Equipment and Used Industrial Refrigeration Equipment 
 Browse these categories to review recent additions to our used food processing and industrial refrigeration equipment. 

Click On Picture

448 Ton - 2017 SPX Marley SGS Cube BTC-1212-SAJ1 Evaporative Condenser Tower (1 tower units)

448 Ton - 2017 SPX Marley SGS Cube BTC-1212-SAJ1 Evaporative Condenser Tower (1 tower units)
Mfg: Marley Model: BTC-1212-SAJ1
Stock No: SBOD28.30 Serial No: 10142696A1 BTC1212SAJCILCBF 2017
Year of Manufacture: 2017
Number Units in Package: 1
Nominal Tons (total): 448 TR*
Ammonia Tons (total): 336 TR*

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure: 300 PSIG
Pump Requirements: 5HP, 620GPM
Pump Included? NO, can purchase separately

Base Heat Rejection: 6,963.60
Airflow Rate: 71,900
Internal Coil Volume: 60
Fan Motor: 30HP (2 x 15HP), Belt: B137

Top Dimensions: 14'4" L x 9'10" W x 6'6" H
Top Weight: 12,800 LBS
Bottom Dimensions: 14'4" L x 9'10" W x 9'1" H
Bottom Weight: 5,600 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Click here for manual- drawings and specifications (1,137.2 KB)

Click On Picture

515 Ton - 2013 EVAPCO PMC-515E-1G Evaporative Condenser Tower (1 tower units)

515 Ton - 2013 EVAPCO PMC-515E-1G Evaporative Condenser Tower (1 tower units)
Mfg: Evapco Model: PMC-515E-1G
Stock No: SBOD08.30 Serial No: 12-473197
Year of Manufacture: 2013
Number Units in Package: 1
Nominal Tons (total): 515 TR*
Ammonia Tons (total): 365 TR*
Coil Volume (total): 42 ft3
CFM (total): 100300 CFM

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure: 400 PSIG
Pump Requirements (per unit): 10HP
Pump Included? Sump Pump - Aurora Pump Mod. 92-13276-1 Type 341A BF Size 4x59B Impeller size: 7 ¾” Head ft. 45 RPM 1750 Sump Motor - U.S. Motors Mod. RY25A 10HP Frame 215JM Volts 460 1725 RPM 215 JM
Fan Details (per unit): Fan Motor: (2) x 20 HP 1770 RPM 256T Frame FAN BELT B-123-2

Top Dimensions (per unit): 12’ L x 12' W x 5'1" H
Top Weight (per unit): 9,970 LBS
Bottom Dimensions (per unit): 12’ L x 12' W x 8'8" H
Bottom Weight (per unit): 5,500 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click On Picture

580 Ton - 2013 BAC VCA-580A Evaporative Condenser Tower (1 tower units)

580 Ton - 2013 BAC VCA-580A Evaporative Condenser Tower (1 tower units)
Mfg: BAC Model: VCA-580A
Stock No: SBOD09.30 Serial No: U124259401-01
Year of Manufacture: 2013
Number Units in Package: 1
Nominal Tons (total): 580 TR*
Ammonia Tons (total): 412 TR*
Coil Volume (total): 79 ft3
CFM (total): 89700 CFM

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure:  PSIG
Pump Requirements (per unit): 5HP 610 GPM
Pump Included? Water Pump: Bell & Gossett Size: 1531 4BC 7.5BF GPM: 610 FT: 40 HP: 10 RPM: 1750 Max, W.P. PSI: 75 Pump Motor: HP: 10 Volt: 460 RPM: 1770 Hz: 60 FRAME: 215JM Ph: 3 Amps: 13.5
Fan Details (per unit): 2x Fan Motors: HP: 20 RPM: 1765 Hz: 60 FRAME: 256T Ph: 3 Amps: 24.4 Volt: 460 Fan belts: 3B150

Top Dimensions (per unit): 12’ L x 12' W x 6'11" H
Top Weight (per unit): 15,150 LBS
Bottom Dimensions (per unit): 12’ L x 12' W x 8'5" H
Bottom Weight (per unit): 4,330 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click On Picture

710 Ton - 1998 IMECO XLP-XL-710 Evaporative Condenser Tower (1 tower units)

710 Ton - 1998 IMECO XLP-XL-710 Evaporative Condenser Tower (1 tower units)
Mfg: Imeco Model: XLP-XL-710
Stock No: SBOD05.30 Serial No: 15045-1RH
Special Notes about Machine: Goes with matching unit: SBOD04.30. If bought together, XLP-XL-1420-2.

Year of Manufacture: 1998
Number Units in Package: 1
Nominal Tons (total): 710 TR*
Ammonia Tons (total): 504 TR*
CFM (total): 121450 CFM

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure: 250 PSIG
Pump Requirements (per unit): 7.5HP 900 GPM
Pump Included? Recirculating Pump Scot Pump Cedarburg, WI Phone 262-377-7000 Motor Pump 59 6X5 DN-CARBCM Seal 6.00 Impeller diameter 1750 RPM Pump Motor  7.5 hp Frame: 213JM 460 v 1750 rpm Type TEFC
Fan Details (per unit): Fan motors 1-10HP 215T/1735 RPM 1-20HP 256T/1755 RPM 460 volt 60Hz 20,874 MBh

Top Dimensions (per unit): 17’7” L x 12' W x 6'8" H
Top Weight (per unit): 18,280 LBS
Bottom Dimensions (per unit): 17’7” L x 12' W x 8'2" H
Bottom Weight (per unit): 6,800 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click On Picture

710 Ton - 1998 IMECO XLP-XL-710 Evaporative Condenser Tower (1 tower units)

710 Ton - 1998 IMECO XLP-XL-710 Evaporative Condenser Tower (1 tower units)
Mfg: Imeco Model: XLP-XL-710
Stock No: SBOD04.30 Serial No: 15045-1LH
Special Notes about Machine: Goes with matching unit: SBOD05.30. If bought together, XLP-XL-1420-2.

Year of Manufacture: 1998
Number Units in Package: 1
Nominal Tons (total): 710 TR*
Ammonia Tons (total): 504 TR*
CFM (total): 121450 CFM

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure: 250 PSIG
Pump Requirements (per unit): 7.5HP 900 GPM
Pump Included? Recirculating Pump Scot Pump Cedarburg, WI Phone 262-377-7000 Motor Pump 59 6X5 DN-CARBCM Seal 6.00 Impeller diameter 1750 RPM Pump Motor  7.5 hp Frame: 213JM 460 v 1750 rpm Type TEFC
Fan Details (per unit): Fan motors 1-10HP 215T/1735 RPM 1-20HP 256T/1755 RPM 460 volt 60Hz 20,874 MBh

Top Dimensions (per unit): 17’7” L x 12' W x 6'8" H
Top Weight (per unit): 18,280 LBS
Bottom Dimensions (per unit): 17’7” L x 12' W x 8'2" H
Bottom Weight (per unit): 6,800 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click On Picture

967 Ton - 2003 Evapco ATC-967B Evaporative Condenser Tower (1 tower units)

967 Ton - 2003 Evapco ATC-967B Evaporative Condenser Tower (1 tower units)
Mfg: Evapco Model: ATC-967B
Stock No: SBOD03.30 Serial No: MO34471
Year of Manufacture: 2003
Number Units in Package: 1
Nominal Tons (total): 967 TR*
Ammonia Tons (total): 686.57 TR*
Coil Volume (total): 134 ft3
CFM (total): 155300 CFM

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure: 400 PSIG
Pump Requirements (per unit): 10 HP 1,400 GPM
Pump Included? Sump Pump : Peerless Pump Model # 1260GMBF40 S/N 052003 9.78 trim Capacity 1400 gpm @ 80ft. Pump speed 1770 Pump Motor: Baldor Ind. Cat # JMM4110T 40HP 460 volt 1770 RPM 324JM Frame Pump pressure: 3 psig @ the condenser
Fan Details (per unit): 60 HP 460 volt 60 Hz 1785 rpm Frame: 364T 160/80 FLA Belt: 6B-148

Top Dimensions (per unit): 22'4" L x 11'10" W x 10'5" H
Top Weight (per unit): 29,850 LBS
Bottom Dimensions (per unit): 22'4" L x 11'10" W x 6'3" H
Bottom Weight (per unit): 4,300 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click On Picture

967 Ton - 2002 Evapco ATC-967B Evaporative Condenser Tower (1 tower units)

967 Ton - 2002 Evapco ATC-967B Evaporative Condenser Tower (1 tower units)
Mfg: Evapco Model: ATC-967B
Stock No: SBOD02.30 Serial No: MO25117
Year of Manufacture: 2002
Number Units in Package: 1
Nominal Tons (total): 967 TR*
Ammonia Tons (total): 686.57 TR*
Coil Volume (total): 134 ft3
CFM (total): 155300 CFM

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure: 400 PSIG
Pump Requirements (per unit): 10 HP 1,400 GPM
Pump Included? Recirc Pump: Bell & Gossett Model:5BC 7.5BF Size 1531 S/N CK8094-001-H10 Max psig 175 @ 1725 RPM Recirc pump motor: Model# AE49A CAT # UJ10S2AM 10HP Frame: 215JM 460volt RPM:1760 60Hz Type: TE FLA:13.6
Fan Details (per unit): 60 HP 460 volt 60 Hz 1785 rpm Frame: 364T 160/80 FLA Belt: 6B-148

Top Dimensions (per unit): 22'4" L x 11'10" W x 10'5" H
Top Weight (per unit): 29,850 LBS
Bottom Dimensions (per unit): 22'4" L x 11'10" W x 6'3" H
Bottom Weight (per unit): 4,300 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click On Picture

1010 Ton - 2015 BAC VCA-1010A Evaporative Condenser Tower (1 tower units)

1010 Ton - 2015 BAC VCA-1010A Evaporative Condenser Tower (1 tower units)
Mfg: BAC Model: VCA-1010A
Stock No: SBOD06.30 Serial No: U162514301-01-01
Year of Manufacture: 2015
Number Units in Package: 1
Nominal Tons (total): 1010 TR*
Ammonia Tons (total): 717 TR*
Coil Volume (total): 138 ft3
CFM (total): 135800 CFM

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure:  PSIG
Pump Requirements (per unit): 30HP 1200 GPM
Pump Included? Pump:Bell & Gossett Series:1531 Serial: U162514301-01-01 Flow: 1200 (gpm) Head: 75 (ft) Pump Motor  30 hp Frame: 286JP 460 v 36 amps 1760 rpm Type TEFC
Fan Details (per unit): Fan motors 3 x 25HP 256T/1765 RPM 460 volt 60Hz Belt: 17 x 2950 B-116

Top Dimensions (per unit): 18’ L x 12' W x 7'4"" H
Top Weight (per unit): 25,440 LBS
Bottom Dimensions (per unit): 18’ L x 12' W x 8'11"" H
Bottom Weight (per unit): 6,060 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click On Picture

1060 Ton - 1997 IMECO XLP-XL-1060 Evaporative Condenser Tower (1 tower units)

1060 Ton - 1997 IMECO XLP-XL-1060 Evaporative Condenser Tower (1 tower units)
Mfg: Imeco Model: XLP-XL-1060
Stock No: SBOD07.30 Serial No: 14600-1RH
Year of Manufacture: 1997
Number Units in Package: 1
Nominal Tons (total): 1060 TR*
Ammonia Tons (total): 752.6 TR*

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure: 250 PSIG
Pump Requirements (per unit): 10HP 600 GPM
Pump Included? Sump Pump - Aurora Pump Mod. 92-13276-1 Type 341A BF Size 4x59B Impeller size: 7 ¾” Head ft. 45 RPM 1750 Sump Motor - U.S. Motors Mod. RY25A 10HP Frame 215JM Volts 460 1725 RPM 215 JM
Fan Details (per unit): Fan Motor 1x 25HP 460 v 360-3-60 1800 RPM 284T frame Fan Blade: P/N 008208KD Bushing: P/N 0034420 Bearings: Dodge 1 5/8” Fan Belt Size: 2B-140

Top Dimensions (per unit): 12’ L x 12' W x 6'9" H
Top Weight (per unit): 25,000 LBS
Bottom Dimensions (per unit): 12’ L x 12' W x 8'3" H
Bottom Weight (per unit): 6,000 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click On Picture

967 Ton - 2002 Evapco ATC-967B Evaporative Condenser Tower (1 tower units)

967 Ton - 2002 Evapco ATC-967B Evaporative Condenser Tower (1 tower units)
Mfg: Evapco Model: ATC-967B
Stock No: SBOD01.30 Serial No: MO25118
Year of Manufacture: 2002
Number Units in Package: 1
Nominal Tons (total): 967 TR*
Ammonia Tons (total): 686.57 TR*
Coil Volume (total): 134 ft3
CFM (total): 155300 CFM

R-717 (ammonia) or R22 (freon). Last run with Ammonia.
Design pressure: 400 PSIG
Pump Requirements (per unit): 10 HP 1,400 GPM
Pump Included? Recirc Pump: Bell & Gossett Model:5BC 7.5BF Size 1531 S/N 2256417 Max psig 175 @ 1725 RPM Recirc pump motor: Model# AE49A CAT # UJ10S2AM 10HP Frame: 215JM 460volt RPM:1760 60Hz Type: TE FLA:13.6
Fan Details (per unit): 60 HP 460 volt 60 Hz 1785 rpm Frame: 364T 160/80 FLA Belt: 6B-148

Top Dimensions (per unit): 22'4" L x 11'10" W x 10'5" H
Top Weight (per unit): 29,850 LBS
Bottom Dimensions (per unit): 22'4" L x 11'10" W x 6'3" H
Bottom Weight (per unit): 4,300 LBS

Other Notes about machine: After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA.

*Tons at standard conditions: 96.3°F condensing, 20°F suction and 78°F Wet Bulb

Can sell one tower unit from a group upon request for a fee. Please request as needed.

Click here for more information (173.1 KB)

Click On Picture

Northstar M90 CS - 65.3 Tons per Day

Northstar M90 CS - 65.3 Tons per Day
Mfg: North Star Ice Model: M90 CS
Stock No: NSF19-06 Serial No: 1181
Northstar M90 CS Flake Ice - 65.3 Tons per Day. Serial # 1181. Manufactured 2001. Weight: 10,500 LBS. Length: 10'.

* JUST RECEIVED - MORE IMAGES COMING SOON.

Click here to see a video

Click On Picture

Frick Mini Tube Ice Machine - 50 Tons per Day

Frick Mini Tube Ice Machine - 50 Tons per Day
Mfg: Frick Model: F36NF70
Stock No: NSF19-04 Serial No: 11250
1996 Frick F36NF70 Serial# 11250 7/8" SS Mini Tube Ice Maker. 19' H.

* JUST RECEIVED - IMAGES COMING SOON.

Click On Picture

Morris Nugget Ice Machine - 50 Tons per Day

Morris Nugget Ice Machine - 50 Tons per Day
Mfg: Morris Model: NIM-125HV-50
Stock No: NSF19-02 Serial No: 1481-1094
Morris & Associates Nugget Ice Machine NIM-125HV-50. Serial #: 1481-1094. 460V 3 PH, Vilter Compressor VMC 350ES, 125HP motor, dual screw ice chute with 2HP motors, IHP reservoir motor. 54"W x 20"L x 11'4'H. Weight 12,000 LBS.

Click On Picture

Northstar M90 SS - 48.6 Tons per Day

Northstar M90 SS - 48.6 Tons per Day
Mfg: North Star Ice Model: M90 SS
Stock No: NSF19-05 Serial No: 1334
Northstar M90 SS Flake Ice Maker - Serial # 1334. 48.6 Tons per Day. Manufactured 2003. Weight: 10,500 LBS. Length: 10'.

* JUST RECEIVED - MORE IMAGES COMING SOON.

Click here to see a video

Click On Picture

Northstar M40 SS - 22.6 Tons per Day

Northstar M40 SS - 22.6 Tons per Day
Mfg: North Star Ice Model: M40 SS LMG-95
Stock No: NSF19-08 Serial No: 308
Northstar M40 SS LMG-95 Flake Ice Maker - 22.6 Tons per Day. Serial # 0308. Weight 4,800 LBS. Length 8'.

* JUST RECEIVED - MORE IMAGES COMING SOON.

Click here to see a video

Click On Picture

Northstar M40 SS - 22.6 Tons per Day

Northstar M40 SS - 22.6 Tons per Day
Mfg: North Star Ice Model: M40 SS RFS-04
Stock No: NSF19-07 Serial No: 1447
Northstar M40 SS RFS-04 Flake Ice Maker - 22.6 Tons per Day. Serial #1447. Weight 4,800 LBS. Length 8'.

* JUST RECEIVED - MORE IMAGES COMING SOON.

Click here to see a video

Click On Picture

Turbo Ice Machine - 20 Tons per Day

Turbo Ice Machine - 20 Tons per Day
Mfg: Turbo Model: CAR40
Stock No: NSF19-01 Serial No: 890710
Turbo 20 Ton Day Ice Maker, Model CAR40, Serial #: 890710. Has 7'H SS Support Structure, Ice Hopper 6'6" X 11', and Ice Delivery Auger-Dims 12'8" L X 8'3" W X 9'2"H. Weight 9,000 LBS. 28' L for Loading.

* JUST RECEIVED - IMAGES COMING SOON.

Click On Picture

Stainless Steel Ice Storage Holding Bin & Conveyor, Screw Auger

Stainless Steel Ice Storage Holding Bin & Conveyor, Screw Auger
Mfg: Custom Model:
Stock No: NSF19-09 Serial No:
Stainless Steel Ice Storage Holding Bin with Dual Augers and Leveling Paddle Above Augers. This Bin is 48" X 48" X 9' long, dual 6" Diameter Augers also has load cells And Vibrator on each side. Stainless Steel Construction. 5HP Drive on Augers, 1HP Drive On Agitator. Loading Length: 16'.

* JUST RECEIVED - IMAGES COMING SOON.

Click On Picture

Frick RWB-II-399-H Screw Compressor (*HD Micro) - 1000HP

Frick RWB-II-399-H Screw Compressor (*HD Micro) - 1000HP
Mfg: Frick Model: RWB-II-399-H
Stock No: SBOD19.30 Serial No: S0265SFMPTHAA03
FRICK Screw Compressor Sales Order: 21122723000 Model: RWB II-399H Serial # S0265SFMPTHAA03 Separator: N/B #137111 Thermo-siphon: N/B #136976. Volume Ratio: 2.2/5.0, TECO MOTOR 1000 HP, BHP 926.2, Frame 5810S, TYPE: ASHA-FM001, 2300/4160 VOLT 3 PHASE 60 HZ., AMPS: 213 / 118, NEMA DESIGN B, BEARINGS: 6314C3/6314C3, RPM: 3565, Fuses A480R12R-1.

Hours: 38,873

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (477.6 KB)

Click On Picture

Frick RWB-II-316 Screw Compressor (*HD Micro) - 800HP

Frick RWB-II-316 Screw Compressor (*HD Micro) - 800HP
Mfg: Frick Model: RWB-II-316
Stock No: SBOD14.30 Serial No: S0244NFMPTHBA3
FRICK Screw Compressor Sales Order: 280802-07 Model: RWB II-316 Serial # S0244NFMPTHBA3. Screw Model: TDSH283S1320GR. Separator: N/B #117680 Thermo-siphon: N/B #114122. Volume Ratio: 2.2/5.0, TECO MOTOR 800 HP, BHP 735.5, Frame 5810A, TYPE: ASHA, 4160 VOLT 3 PHASE 60 HZ., AMPS: 172 / 95, NEMA DESIGN B, BEARINGS: 6314C3/6314C3, RPM: 3570.

Hours: 18,468

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (646.5 KB)

Click On Picture

Frick RWB-II-316 Screw Compressor (*HD Micro) - 800HP

Frick RWB-II-316 Screw Compressor (*HD Micro) - 800HP
Mfg: Frick Model: RWB-II-316
Stock No: SBOD13.30 Serial No: S0245NFMPTHBA3
FRICK Screw Compressor Sales Order: 280802-07 Model: RWB II-316 Serial # S0245NFMPTHBA3. Screw Model: TDSH283S15470. Separator: N/B #117679 Thermo-siphon: N/B #114577. Volume Ratio: 2.2/5.0, TECO MOTOR 800 HP, BHP 735.5 Frame 5810A, TYPE: ASHA, 4160 VOLT 3 PHASE 60 HZ. AMPS: 172 / 95 , NEMA DESIGN B, BEARINGS: 6314C3/6314C3, RPM: 3570.

Hours: 38,873

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (779.2 KB)

Click On Picture

Frick RWB-II-222 Screw Compressor (*HD Micro) - 600HP

Frick RWB-II-222 Screw Compressor (*HD Micro) - 600HP
Mfg: Frick Model: RWB-II-222
Stock No: SBOD12.30 Serial No: S0431NFMPTHBA3
FRICK Screw Compressor Sales Order: 280802-10 Model: RWB II-222 Serial # S0431NFMPTHBA3. Screw Model #: TDSH233L1682FR. Separator: N/B #119404 Thermo-siphon: N/B #114576. Volume Ratio: 2.2/5.0, TECO MOTOR 600 HP, BHP 516.9 Frame 5810A, TYPE: ASHAPA001-DP, 4160 VOLT 3 PHASE 60 HZ., AMPS: 109 / 60.3 , NEMA DESIGN B, BEARINGS: 6314C3/6314C3, RPM: 3570.

Hours: 37,719

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (566.6 KB)

Click On Picture

Frick RWB-II-676 Screw Booster Compressor (*HD Micro) - 500HP

Frick RWB-II-676 Screw Booster Compressor (*HD Micro) - 500HP
Mfg: Frick Model: RWB-II-676
Stock No: SBOD18.30 Serial No: S0068NFMFTHBA3
FRICK Screw Compressor Sales Order: 280802-04 Model: RWB-676 Serial # S0068NFMFTHBA3. Screw Model #: TDSH355L0577K. Separator: N/B #117356 Thermo-siphon: N/B #120115. Volume Ratio: 2.2/5.0, TECO MOTOR 500 HP, BHP 449.8, Frame 5808A, TYPE: ASHA-PA001DP, 4160 VOLT 3 PHASE 60 HZ., AMPS: 109 / 60.3, NEMA DESIGN B, BEARINGS: 6314C3/6314C3, RPM: 3570.

Hours: 44,227

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (586.6 KB)

Click On Picture

Frick RWB-II-222 Screw Compressor (less screw & micro) - 500HP

Frick RWB-II-222 Screw Compressor (less screw & micro) - 500HP
Mfg: Frick Model: RWB-II-222
Stock No: SBOD26.30 Serial No: SO442NFMPTHBA3
Frick RWB-II-222 Screw Compressor (less screw) - 500HP. Serial # SO442NFMPTHBA3. TECO Motor 500 HP, 4160 Volts, 109/60.3 AMPS 3570 RPM, Bearings: 6314C3/6314C3. Purchased from Seaboard Foods Pork Plant in Oklahoma, USA.

Click here for more photos and information (609.0 KB)

Click On Picture

Frick RDB-546 Screw Booster Compressor (*HD Micro) - 400HP

Frick RDB-546 Screw Booster Compressor (*HD Micro) - 400HP
Mfg: Frick Model: RDB-546
Stock No: SBOD15.30 Serial No: S0053NFMFTHCA3
FRICK Screw Compressor Sales Order: 280802-22 Model: RDB-546 Serial # S0053NFMFTHCA3. Screw Model #: TDSL283XL0108JJR. Separator: N/B #119346 Thermo-siphon: N/B #120117. Volume Ratio: 2.2/5.0, TECO MOTOR 400 HP, BHP 336.9, Frame 5009A, TYPE: ASHA-PA001DP, 4160 VOLT 3 PHASE 60 HZ., AMPS: 87.9 / 48.8, NEMA DESIGN B, BEARINGS: 6314C3/6314C3, RPM: 3565.

36,081 Hours

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (692.6 KB)

Click On Picture

Frick RDB-546 Screw Booster Compressor (*HD Micro) - 400HP

Frick RDB-546 Screw Booster Compressor (*HD Micro) - 400HP
Mfg: Frick Model: RDB-546
Stock No: SBOD16.30 Serial No: S0054NFMFTHCA3
FRICK Screw Compressor Sales Order: 280802-22 Model: RDB-546 Serial # S0054NFMFTHCA3. Screw Model #: TDSL283XL0080JJ. Separator: N/B #119347 Thermo-siphon: N/B #120113. Volume Ratio: 2.2/5.0, TECO MOTOR 400 HP, BHP 336.9, Frame 5009A, TYPE: ASHASKDP, 4160 VOLT 3 PHASE 60 HZ., AMPS: 87.9 / 48.8, NEMA DESIGN B, BEARINGS: 6314C3/6314C3, RPM: 3565.

Hours: 38,642

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (655.9 KB)

Click On Picture

Frick RDB-546 Screw Booster Compressor (*HD Micro) - 400HP

Frick RDB-546 Screw Booster Compressor (*HD Micro) - 400HP
Mfg: Frick Model: RDB-546
Stock No: SBOD17.30 Serial No: S0050NFMFTHBA3
FRICK Screw Compressor Sales Order: 280802-01 Model: RDB-546 Serial # S0050NFMFTHBA3. Screw Model #: TDSL283XL022IJJRZ. Separator: N/B # 120154 Thermo-siphon: N/B #120112. Volume Ratio: 2.2/5.0, TECO MOTOR 400 HP, BHP 336.9, Frame 5009A, TYPE: ASHA PA002, 4160 VOLT 3 PHASE 60 HZ., AMPS: 87.9 / 48.8, NEMA DESIGN B, BEARINGS: 6314C3/6314C3, RPM: 3565.

Hours: 22,552

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (651.4 KB)

Click On Picture

Frick RDB-II-316B Screw Booster Compressor (*HD Micro) - 300HP

Frick RDB-II-316B Screw Booster Compressor (*HD Micro) - 300HP
Mfg: Frick Model: RDB-II-316B
Stock No: SBOD24.30 Serial No: S0136RFMFTHAA03
FRICK Low Stage Screw Compressor Model # RDB-316 S/N S0136RFMFTHAA03 Sales order# 21122704000. Screw Model #: TDSL283SO135GG. Separator National Board #136626 Thermo-siphon National Board #136619. Volume Ratio: 2.2/5.0, RAM SWITCHGEAR PANEL, TOSHIBA, 300 HP Frame 445TS, Volts 460 3 Phase, 340 amps 3570 rpm, BEARINGS: 6313C3/6313C3.

Hours: 47,778

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (621.6 KB)

Click On Picture

Frick RWB-II-316 Screw Compressor (less screw & micro) - 250HP

Frick RWB-II-316 Screw Compressor (less screw & micro) - 250HP
Mfg: Frick Model: RWB-II-316
Stock No: SBOD27.30 Serial No: S0243NFMFTHBA3
Frick RWB-II-316 Screw Compressor (less screw and micro) - 250HP. Serial # S0243NFMFTHBA3. TECO Motor 250 HP, 4160 Volts, 56/31 AMPS 3555 RPM, Bearings: 6315C3/6315C3. Purchased from Seaboard Foods Pork Plant in Oklahoma, USA.

Click here for more photos and information (515.4 KB)

Click On Picture

Frick RWB-II-270B Screw Booster Compressor (*HD Micro) - 200HP

Frick RWB-II-270B Screw Booster Compressor (*HD Micro) - 200HP
Mfg: Frick Model: RWB-II-270B
Stock No: SBOD23.30 Serial No: S0058RFMCT0AA03
FRICK Low Stage Screw Compressor Model # RWB II-270B S/N: S0058RFMCTOAA03 Sales order#: 21122701000. Screw Model #: TDSH233XL0094FL. Separator National Board #136616 Thermo-siphon National Board #136618. Volume Ratio: 2.2/5.0, RAM SWITCHGEAR PANEL, TOSHIBA , 200 HP Frame 444TS, Volts 460 3 Phase, 235 amps 3565 rpm, BEARINGS: 6313C3/6313C3.

Hours: 46,469

After Seaboard Foods built their new engine room, we purchased their entire original engine room in Oklahoma, USA. Includes an updated HD Micro Panel.

Click here for more photos and information (771.4 KB)

Click On Picture

Frick RXF-39 Screw Booster Compressor (*HD Micro) - 40HP

Frick RXF-39 Screw Booster Compressor (*HD Micro) - 40HP
Mfg: Frick Model: RXF-39
Stock No: SBOD25.30 Serial No: 10241F31737352
FRICK Low Stage Booster Screw Compressor Model # RXF 39 Serial # 10241G31879349 Sales Order # 30063836710 Separator National Board # 163119 Thermo-siphon Type: Alfa Nova HP 52-30 H Serial # 42773303. Volume Ratio Control: Variable 2.2, 3.5, 5.0. Oil charge: 15 gal, operates with 12 gal Ram DBS II Compressor Motor, 40 HP Frame 286TSC, Volts 460 3 Phase, 46 Amps 3530 rpm. Purchased from Seaboard Foods Pork Plant in Oklahoma, USA. Includes updated HD Micro.

Click here for more photos and information (633.9 KB)

Click On Picture

Frick RDB-316-B Screw Booster Compressor - 235 HP

Frick RDB-316-B Screw Booster Compressor - 235 HP
Mfg: Frick Model: RDB-316-B
Stock No: JSAC01 Serial No: D0177XFMCTIAA03
Frick Rotary Screw Compressor Package. Model: RDB 316 B. Serial: D0177XFMCTIAA03. Order: 27294101000. Compressor model: TDSL283S0236GG, refrigerant R-717, Vi 2.8, year 2003. RAM electric motor: 235 HP, 3565 RPM, 460V, 3-phase, 60 Hz, 445TDZ frame. Hobbs meter reads: 44,815.8 HRS. Overall dimensions: 138 in. L x 5 ft. 6 in. W x 113 in. H (height can be reduced to 88 inches with suction strainer removed).

Click here for more pictures (538.7 KB)

Click On Picture

2007 Frick RWF-316 Screw Booster Compressor - 235 HP

2007 Frick RWF-316 Screw Booster Compressor - 235 HP
Mfg: Frick Model: RWF-II-316-B
Stock No: JSAC02 Serial No: 0136
Used Frick Rotary Screw Compressor Package. Model: RWF II 316 B. Serial: 0136. Refrigerant: R717. Year: 2007. Compressor model: SGC28130286, 2.2-5.0 Vi, 3600 max RPM, 1890 swept volume cubic feet per minute at max speed, year 2007. RAM electric motor: 235 HP, 3555 RPM, 460V, 3-phase, 60 Hz, 445TDZ frame, ODP enclosure. Hobbs meter reads: 10,392.4 HRS. Overall dimensions: 13 ft. 8 in. L x 6.6 ft. W x 8.5 ft. H.

Click here for more pictures (529.7 KB)

Click On Picture

Frick RWB-II-222-E Screw Compressor - 500 HP

Frick RWB-II-222-E Screw Compressor - 500 HP
Mfg: Frick Model: RWB-II-222-E
Stock No: JSAC03 Serial No: S0428NFMC0HAC3
Used Frick Rotary Screw Compressor Package. Model: RWB-II-222-E. Serial: S0428NFMC0HAC3. Sales order: 264971-01. Refrigerant: R717. Compressor model: TDSH233L2121FR, 2.2-5.0 Vi, year 2004. Package year 1994. Toshiba-RAM electric motor: 500 HP, 3570 RPM, 460V, 60 Hz, 3-phase, ODP enclosure, 505USS frame. Hobbs meter reads: 95,719.2 HRS. Overall dimensions: 16 ft. 4 in. L x 6 ft. W x 8 ft. 4 in. H.

Click here for more pictures (629.3 KB)

Click On Picture

Dunham Busch / Frick Screw Compressor Package - 500 HP

Dunham Busch / Frick Screw Compressor Package - 500 HP
Mfg: Dunham-Bush Model: 106
Stock No: JSAC06 Serial No: 25LODLR3x3929
Dunham Busch-Frick Rotary Screw Compressor Package. Compressor model: 106, serial 25LODLR3x3929, refrig R717, 3.6 Vi. Package built by Frick in 1981, and features a Dunham-Bush compressor. Toshiba motor 500 HP, 3520 RPM, 460V, 60 Hz, 3-phase, 505USS frame. Overall dimensions: 14 ft. 7 in. L x 6 ft. W x 110 in. H (height can be reduced to 80 inches if the suction strainer is removed).

Click here for more pictures (483.4 KB)

Click On Picture

Waukesha 130 Positive Displacement Pump - 5 HP

Waukesha 130 Positive Displacement Pump - 5 HP
Mfg: Waukesha Model: 130
Stock No: RCSC380.47a Serial No: 309191 02
Used Waukesha Cherry-Burrell Positive Displacement Pump. Model: 130. S/N: 309191 02. 3A Sanitary design. Displacement per revolution: 0.254 gallon. Estimated flow rate with this gear drive is 49 GPM. SEW-Eurodrive gear drive ratio: 9.06 (final RPM 193). Motor: 5 HP, 460V, 6.5 amps, 1750 RPM, 60 Hz, 3-phase. Inlet/outlet ports: 3 in. dia S-line fittings. Overall dimensions: 50 in. L x 24 in. W x 56 in. H.

Click here for pump curve (116.1 KB)

Click On Picture

Romicon Ultra Filteration System

Romicon Ultra Filteration System
Mfg: Romicon, Inc. Model: CMP 12/20-F/B
Stock No: SSFA211 Serial No: 90003
Used Romicon Ultra Filteration System. Romicon, Inc. Woburn, MA is a subsidiary of Rohm and Haas Company. Model: CMP 12/20-F/B. Serial: 90003. Date: 6/90. The Romicon CMP 12/20-F/B filtration is designed to clarify aqueous solutions utilizing ceramic media, micropourous membranes. The filtration is a pressure driven operation. This listing include a main filtration skid, two control panels, and a Goulds centrifugal pump. Goulds pump model 3196 XLT, size 8x10x13, flowrate 1900 GPM at 85 TDH, 125 HP, 1800 RPM, 230/460V, 3-phase, 60 Hz. Overall dimensions: 125 in. L x 82 in. W x 109 in. H (main skid), 40 in. W x 95 in. L x 108 in. H (pump), 42 in. W x 16 in. D x 77 in. H (stainless control cabinet), 48 in. W x 34 in. D x 76 in. H (second control cabinet).

Click here for select pages from manual (3,483.1 KB)
Click here for drawings (1,676.7 KB)
Click here for more pictures (2,493.7 KB)

Click On Picture

Stainless Steel Tri-Flo Pneumatic Valve Cluster

Stainless Steel Tri-Flo Pneumatic Valve Cluster
Mfg: Tri Clover Model:
Stock No: NOI1804 Serial No:
Used Stainless Steel Tri-Flo Pneumatic Valve Cluster. Tri-flo Ladish, a division of Tri-Clover. (5) valves 2.5 in. x 2 in., (37) valves 2 in. x 2 in. Total valves: 42.

Click On Picture

Vilter 4516 Reciprocating Compressor - 300 HP

Vilter 4516 Reciprocating Compressor - 300 HP
Mfg: Vilter Model: 4516
Stock No: BRCA02 Serial No:
Used Vilter 4516 Reciprocating Compressor - 300 HP. Compressor nameplate is missing. Number of cylinders: 16. Marathon electric motor: 300 HP, 1185 RPM, 460V, 60 Hz, 3-phase, DP enclosure, 449T frame. Previously run on ammonia refrigerant, removed running.

Click here for more pictures (397.9 KB)

Click On Picture

Vilter 458 Reciprocating Compressor

Vilter 458 Reciprocating Compressor
Mfg: Vilter Model: 458
Stock No: BRCA03 Serial No:
Used Vilter 458 Reciprocating Compressor. Compressor nameplate missing. Number of cylinders: 8. Lincoln electric motor: 150 HP, 460V, 1175 RPM, 60 Hz, 3-phase, 445TS frame. Previously run on ammonia refrigerant, removed running.

Click here for more pictures (366.2 KB)

Click On Picture

Vilter 458 Reciprocating Compressor - Parts Unit

Vilter 458 Reciprocating Compressor - Parts Unit
Mfg: Vilter Model: 458
Stock No: BRCA04 Serial No: 82037
Used Vilter 458 Reciprocating Compressor - Parts Unit. Needs repair. Size: A12K458XLB. Serial: 82037. Order: SO65667-2. Refrigerant: R717. Number of cylinders: 8. Ammonia refrigerant. This was purchased with several other compressors at an ammonia line that was closed down. This one was not operational when we purchased it.

Click here for more pictures (399.4 KB)

Click On Picture

Vilter Vertical Oil Separator for 450 Series Compressor

Vilter Vertical Oil Separator for 450 Series Compressor
Mfg: Vilter Model:
Stock No: BRCA05 Serial No:
2 Available. Used Vilter Vertical Oil Separator for 450 Series Compressor. Quantity: 2. Ammonia refrigerant.

Click On Picture

Portable Dual Vilter 458 Compressor Unit

Portable Dual Vilter 458 Compressor Unit
Mfg: Vilter Model: 458
Stock No: BPNY03 Serial No: 66832, 66833
Used Portable Dual Vilter 458 Compressor Unit. Features two Vilter 450 series 8-cylinder ammonia refrigerant compressors mounted inside a 20 ft. cargo container. Compressor 1: model 458, size A12K458XLB, order K53620-2, serial 66833. Electric motor: 175 HP (132 KW), 480V, 194 Amp, 1785 RPM, 60 Hz, 3-phase (also rated for 110 kW, 50 Hz, 400/690V, 194/112 amp, 1485 RPM). Compressor 2: model 458, size A12K458XLB, order K53620-1, serial 66832. Electric motor: 175 HP (132 KW), 132 KW, 480V, 194 Amp, 1785 RPM, 60 Hz, 3-phase (also rated for 110 kW, 50 Hz, 400/690V, 194/112 amp, 1485 RPM). Oil separator vessels certified by Standard Refrigeration: MAWP 400 PSI at 400F, MDMT -20F at 400 PSI, year built: 2009. Estimated weight: 15,000 LBS. Outside dimensions: 20 ft. L x 8 ft. W x 8.5 ft. H.

Click here for more pictures (1,748.7 KB)

Click On Picture

Vilter 450-XL 8-Cylinder Reciprocating Compressor - 175 HP

Vilter 450-XL 8-Cylinder Reciprocating Compressor - 175 HP
Mfg: Vilter Model: 458
Stock No: BPNY01 Serial No: 66832
Used Vilter 450 XL Series Reciprocating Compressor. Model: 458XL. Serial 66832. Order: K53620-1. Size: A12K458XLB. Refrigerant: AMMO. Number of cylinders: 8. Electric motor: 175 HP (132 KW), 132 KW, 480V, 194 Amp, 1785 RPM, 60 Hz, 3-phase (also rated for 110 kW, 50 Hz, 400/690V, 194/112 amp, 1485 RPM).

Click On Picture

Vilter 450-XL 8-Cylinder Reciprocating Compressor - 175 HP

Vilter 450-XL 8-Cylinder Reciprocating Compressor - 175 HP
Mfg: Vilter Model: 458
Stock No: BPNY02 Serial No: 66833
Used Vilter 450 XL Series Reciprocating Compressor. Model: 458XL. Serial 66833. Order: K53620-2. Size: A12K458XLB. Refrigerant: AMMO. Number of cylinders: 8. Electric motor: 175 HP (132 KW), 480V, 194 Amp, 1785 RPM, 60 Hz, 3-phase (also rated for 110 kW, 50 Hz, 400/690V, 194/112 amp, 1485 RPM).

Click On Picture

Waukesha Model 6 Positive Displacement Pump

Waukesha Model 6 Positive Displacement Pump
Mfg: Waukesha Model: 6
Stock No: END88305.5 Serial No: 86565 SS
Used Waukesha 6 Positive Displacement Pump. Model: 6. Serial: 86565 SS. Motovario Corp gear drive model: HA42, serial 46011, ratio: 8.11. Leeson Washguard electric motor: 1 HP, 1725 RPM, 115V / 208-230V, 12.8 / 6.4 amps, frame 56C, single phase, 60 Hz. Inlets/outlets: 1-1/2 in. dia. sanitary bevel seat fittings.

Click here for pump curve (168.6 KB)
Click here for more pictures (982.8 KB)

Click On Picture

Vilter 440 Series 6-Cylinder Reciprocating Compressor - 100 HP

Vilter 440 Series 6-Cylinder Reciprocating Compressor - 100 HP
Mfg: Vilter Model: 446
Stock No: CPEM02 Serial No: R12719
Used Vilter 440 Series 6-Cylinder Reciprocating Compressor. Size: AK446. Serial: R12719. Order: F75212. Refrigerant: AMMO. Removed from ammonia refrigeration service in running condition December 2018. Lincoln A/C Motor: 100 HP, 1770 RPM, 230/460V, 238/119 amps, 3-phase, 60 Hz, 404T frame. Overall dimensions: 50 in. W x 76 in. L x 50 in H.

Click here for more pictures (579.0 KB)

Click On Picture

Mycom N6B Reciprocating Compressor - 100 HP

Mycom N6B Reciprocating Compressor - 100 HP
Mfg: Mycom Model: N6B
Stock No: CPEM04 Serial No: 19004
Mycom N6B Reciprocating Compressor. Built by Mayekawa Mfg. Co. Ltd. Japan. Model: N6B. Serial: 19004. Number of cylinders: 6. Removed from ammonia refrigeration service in running condition December 2018. Pacemaker Motor: 100 HP, 1780 RPM, 460V, 120 amps, 404T frame, 60 Hz, 3-phase. Overall dimensions: 60 in. W x 85 in. L x 57 in. H.

Click here for more pictures (633.5 KB)

Click On Picture

Frick RXB-39 Rotary Screw Compressor - 100 HP

Frick RXB-39 Rotary Screw Compressor - 100 HP
Mfg: Frick Model: RXB-39
Stock No: RELC01 Serial No: S0389LFMCTHAA3
Frick Rotary Screw Compressor, model RXB-39, serial S0389LFMCTHAA3, sales order 208578-01, refrigerant R717 (ammonia), max speed 3600 RPM, max design pressure 300 PSIG. Year: 1992. Frick compressor model XJS120L0587F, refrigerant NH3/R22, volume ratio 2.2-5.0. Frick RXB Plus micro control panel. Toshiba 3-phase induction motor: 100 HP, 3555 RPM, 208-230/460V, 245-230/115 amps, 60 Hz, 3-phase, DP enclosure, 365TS frame. Compressor runtime: 62,749.9 hours. Overall dimensions: 8 ft. L x 5 ft. W x 5 ft. H.

Click here for Frick ratings chart (193.8 KB)
Click here for more pictures (1,301.6 KB)

Click On Picture

Frick RXB-39 Rotary Screw Compressor - 100 HP

Frick RXB-39 Rotary Screw Compressor - 100 HP
Mfg: Frick Model: RXB-39
Stock No: RELC02 Serial No: S0390LFMCTHAA3
Frick Rotary Screw Compressor, model RXB-39, serial S0390LFMCTHAA3, sales order 208578-01, refrigerant R717 (ammonia), max speed 3600 RPM, max design pressure 300 PSIG. Year: 1992. Frick compressor model XJS120L0584F, refrigerant NH3/R22, volume ratio 2.2-5.0. Frick RXB Plus micro control panel. Toshiba 3-phase induction motor: 100 HP, 3555 RPM, 208-230/460V, 245-230/115 amps, 60 Hz, 3-phase, DP enclosure, 365TS frame. Compressor runtime: 93,923.3 hours. Overall dimensions: 8 ft. L x 5 ft. W x 5 ft. H.

Click here for Frick ratings chart (193.8 KB)
Click here for more pictures (1,290.0 KB)

Click On Picture

Vilter 450-XL 12-Cylinder Reciprocating Compressor - 150 HP

Vilter 450-XL 12-Cylinder Reciprocating Compressor - 150 HP
Mfg: Vilter Model: 4512XL
Stock No: DGNM01 Serial No: 63254
Used Vilter Ammonia Reciprocating Compressor. VMC 450 XL Series. Size: M11K4512XLB. Serial: 63254. Number of cylinders: 12. Configured for ammonia refrigerant. Unit was refurbished (by a third party), installed, but has zero hours run time since rebuild. Lincoln Electric Industrial Duty Motor: 150 HP, 1185 RPM, 460V, 204 amps, 60 Hz, 3-phase, ODP enclosure, 445T frame. Overall dimensions: 10 ft. 6 in. L x 41 in. W x 6 ft 3 in. H.

Click here for more pictures (686.0 KB)

Click On Picture

Vilter 450-XL 16-Cylinder Reciprocating Compressor - 300 HP

Vilter 450-XL 16-Cylinder Reciprocating Compressor - 300 HP
Mfg: Vilter Model: 4516XL
Stock No: DGNM02 Serial No: 62540
Used Vilter Ammonia Reciprocating Compressor. VMC 450 XL Series. Size: A12K4516XLB. Serial: 62540. Number of cylinders: 16. Configured for ammonia refrigerant. Unit was previously refurbished (by a third party), installed, but has zero hours run time since rebuild. Toshiba High Efficiency Motor: 300 HP, 1185 RPM, 460V, 60 Hz, 3-phase, TEFC enclosure, N587UZ frame. Overall dimensions: 10 ft. 9 in. L x 41 in. W x 6 ft 4 in. H.

Click here for more pictures (641.2 KB)

Click On Picture

Minuteman PowerBoss 32 Floor Scrubber / Sweeper

Minuteman PowerBoss 32 Floor Scrubber / Sweeper
Mfg: Minuteman Model: PB32036QP
Stock No: SSFA4306 Serial No: WOB32036QP0816
Used PowerBoss 32 Floor Scrubber / Sweeper. Model: PB32036QP. Volts: 36-DC. Amps: 60. Serial: WOB32036QP0816.

Click On Picture

Minuteman E20 Floor Scrubber / Sweeper

Minuteman E20 Floor Scrubber / Sweeper
Mfg: Minuteman Model:
Stock No: SSFA4308 Serial No:
Minuteman E20 Floor Scrubber / Sweeper. Rechargeable electric power. The E Series machines form Minuteman’s new and innovative line of walk-behind scrubbers. With advanced technology and new green clean features; this Minuteman E20 auto scrubber has been engineered to change the way you clean floors. (ACN60)

Click here for Minuteman brochure (1,952.9 KB)

Click On Picture

Lincoln Electric TIG / ARC Welder

Lincoln Electric TIG / ARC Welder
Mfg: Lincoln Electric Co. Model: TIG-355
Stock No: NOI1803 Serial No:
Lincoln Electric TIG / ARC Welder. Square Wave AC/DC TIG and Stick ARC welder. 460 Volts.

Click here for Lincoln manual (738.5 KB)

Click On Picture

M&M Howden Rotary Screw Booster Compressor Package - 150 HP

M&M Howden Rotary Screw Booster Compressor Package - 150 HP
Mfg: Howden Model: WRV-255
Stock No: OBSF008 Serial No: 99M-090-0100A
M&M Refrigeration rotary screw booster compressor package featuring a Howden brand compressor. M&M model no.: H146BL-185. Mfg. no.: 99M-090-0100A. X no.: WRV255. Max working pressure: 300 PSIG (compressor). RAM Industries High Efficiency Motor: 150 HP, 230/460V, 3-phase, 60 Hz. M&M micro control panel. Viking oil pump. *Note: the suction strainer and valve are missing. Previously run in an ammonia refrigeration application.

Click here for more pictures (1,318.1 KB)

Click On Picture

Waukesha 220 Positive Displacement Pump - 15 HP

Waukesha 220 Positive Displacement Pump - 15 HP
Mfg: Waukesha Model: 220
Stock No: SSFA1732 Serial No: 14313 CRB 99
Used Waukesha 220 Positive Displacement Pump. Model: 220. Serial: 14313 CRB 99. Flow rate for new pump is 310 GPM with required horsepower and RPM. Displacement per revolution: 0.522 gallon. Gear drive ratio: 4.94 (354 final RPM). US Electrical Motor 15 HP 208-230/460V, 1745 RPM, 60 Hz, 3-phase. Estimated flowrate at 354 RPM: 184 GPM.

Click here for more pictures (705.7 KB)

Click On Picture

Waukesha 220 Positive Displacement Pump - 15 HP

Waukesha 220 Positive Displacement Pump - 15 HP
Mfg: Waukesha Model: 220
Stock No: SSFA1735 Serial No: 159533 CRB 04
Used Waukesha 220 Positive Displacement Pump. Model: 220. Serial: 159533 CRB 04. Flow rate for new pump is 310 GPM with required horsepower and RPM. Displacement per revolution: 0.522 gallon. Gear drive ratio: 4.94 (354 final RPM). US Electrical Motor 15 HP 208-230/460V, 1745 RPM, 60 Hz, 3-phase. Estimated flow rate at 354 RPM: 184 GPM.

Click here for more pictures (673.9 KB)

Click On Picture

Waukesha 220 Positive Displacement Pump - 15 HP

Waukesha 220 Positive Displacement Pump - 15 HP
Mfg: Waukesha Model: 220
Stock No: SSFA1739 Serial No: 81297SS R1-2
Used Waukesha 220 Positive Displacement Pump. Model: 220. Serial: 81297SS R1-2. Flow rate for new pump is 310 GPM with required horsepower and RPM. Displacement per revolution: 0.522 gallon. Gear drive ratio: 4.94 (354 final RPM). US Electrical Motor 15 HP 208-230/460V, 1745 RPM, 60 Hz, 3-phase. Estimated flow rate at 354 RPM: 184 GPM.

Click here for more pictures (718.1 KB)

Click On Picture

FlatPlate Brazed Plate Heat Exchanger

FlatPlate Brazed Plate Heat Exchanger
Mfg: FlatPlate Model: 31002098
Stock No: SSFA1922 Serial No: P10X20-280M
Used FlatPlate Brazed Plate Heat Exchanger. 3100 Series. Model: 31002098. Serial: P10X20-280M. Max design pressure: 450 PSI / 31 Bar. Max Design temp 190F / 33.7C (side A). Mfg. date: 08.01.31.

Click On Picture

Schmidt 4-Effect Evaporation System

Schmidt 4-Effect Evaporation System
Mfg: Schmidt Model:
Stock No: SSFA256 Serial No:
Schmidt Model 4-Effect Evaporator with (4) Heaters, Related Controls. Originally designed for clarified apple and pear juice, feed rate 41,000 LBS/HR, inlet temp 120-140F, inlet concentration 10 percent TS, evaporation rate 35,300 LBS/HR, final concentration 72 percent TS, concentrate outlet temp 50F, concentrate flow rate 5,680 LBS, HR, steam consumption 7,500 LBS/HR at 125 PSIG.

Click here for more pictures (254.9 KB)

Click On Picture

FMC Model 100 Brush Pulper Finisher

FMC Model 100 Brush Pulper Finisher
Mfg: FMC Model: 100
Stock No: SSFA358 Serial No: AI-1506
FMC Food Machinery Corp. Pulper / Finisher. Model: 100. Serial AI-1506. Equipped with four brushes. Includes one 7/16 in. screen (installed). Hydraulic drive motor. Ports: 5 in. threaded. Dimensions: 84 in. L x 42 in. W x 45 in. H.

Click here for more pictures (1,156.4 KB)
Click here for FMC literature (397.3 KB)

Click On Picture

FMC Model 100 Brush Pulper Finisher

FMC Model 100 Brush Pulper Finisher
Mfg: FMC Model: 100
Stock No: SSFA359 Serial No: AH-1467
FMC Food Machinery Corp. Pulper / Finisher. Model: 100. Serial AH-1467. Equipped with four brushes. Includes one 7/16 in. screen (installed). Hydraulic drive motor. Ports: 5 in. threaded. Dimensions: 84 in. L x 42 in. W x 45 in. H.

Click here for more pictures (892.4 KB)
Click here for FMC literature (397.3 KB)

Click On Picture

Rietz Angle Disintegrator - 30 HP

Rietz Angle Disintegrator - 30 HP
Mfg: Rietz Model:
Stock No: SSFA1015 Serial No:
Bepex Rietz Angle Disintegrator Unit. Stainless steel infeed chute, discharge tank, and level sensor included. Blade diameter: 12 in. US Electrical Motors: 30 HP, 208-230/460V, 1770 RPM, 60 Hz, 3-phase (also rated for 190/380V, 50 Hz).

Click here to see a Video #1

Click here to see a Video #2

Click here for more pictures (578.1 KB)

Click On Picture

Stainless Steel Insulated Holding Tubes - 20 ft. L

Stainless Steel Insulated Holding Tubes - 20 ft. L
Mfg: Not Specified Model:
Stock No: SSFA146 Serial No:
Stainless Steel Insulated Holding Tubes - 20 ft. L. Tube quantities: (7) 2.5 in., (21) 2 in. Fitting type: sanitary tri-clamp. Overall dimensions: 258 in. L x 25 in. W x 112 in. H.

Click here for more pictures (458.4 KB)

Click On Picture

Waukesha 130 Positive Displacement Pump - 5 HP

Waukesha 130 Positive Displacement Pump - 5 HP
Mfg: Waukesha Model: 130
Stock No: SSFA142 Serial No: 87959 SS
Used Waukesha Cherry-Burrell Positive Displacement Pump. Model: 130. Serial: 87959 SS. Displacement per revolution: 0.254 gallons. Nominal capacity to 150 GPM. Maximum pressure: 200 PSI. SEW Eurodrive 5 HP, 230/460V, 1680 RPM, 2.86 ratio, 405-1995 RPM in, 142-692 RPM out.

Click here for more pictures (737.9 KB)

Click On Picture

Waukesha 130 Positive Displacement Pump - 7.5 HP

Waukesha 130 Positive Displacement Pump - 7.5 HP
Mfg: Waukesha Model: 130
Stock No: SSFA246 Serial No: 9337 SS
Used Waukesha Cherry-Burrell Positive Displacement Pump. Model: 130. Serial: 9337 SS. Displacement per revolution: 0.254 gallons. Nominal capacity to 150 GPM. Maximum pressure: 200 PSI. TECO electric motor 7.5 HP, 208-230/460V, 1745 RPM, 60 Hz, 3-phase, TEFC. Reliance gear drive ratio 5.1, 130 RPM min, 520 RPM max.

Click here for more pictures (878.2 KB)

Click On Picture

Waukesha 220 Positive Displacement Pump - HYD

Waukesha 220 Positive Displacement Pump - HYD
Mfg: Waukesha Model: 220
Stock No: SSFA183 Serial No: 88214 SS
Used Waukesha 220 Positive Displacement Pump. Model: 220. Serial: 88214 SS. Flow rate for new pump is 310 GPM with required horsepower and RPM. Displacement per revolution: 0.522 gallon. Hydraulic drive motor.

Click here for more pictures (584.2 KB)

Click On Picture

Crepaco 18V2 Centrifugal Pump - 7.5 HP

Crepaco 18V2 Centrifugal Pump - 7.5 HP
Mfg: APV Crepaco Model: 18VS
Stock No: SSFA195 Serial No: C-6843
Crepaco Model 18VS Centrifugal Pump w/7 1/2 HP Motor, SN C-6843



View previously sold New Additions. Genemco can source products required for your project.

Click Here if you don't see what you're looking for in our online catalog.


 Quality Used Food Processing Equipment and Used Industrial Refrigeration Equipment At Competitive Prices