|
|
Click On Picture
|
1993 Chester Jensen Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model: XD-30-30-32
|
|
Stock No: BIIR7001.
|
Serial No: 9303-CP
|
|
1993 Chester Jensen Plate Chiller. Model XD30-30-32. S/N 9303-CP. (30) Plates. Chilling liquid from 75 °F to 33 °F with a single pass takes up to 20 tons of refrigerant per plate or 600 tons, based on 14,500 gph or 240 gpm. Chilling liquid from 45°F to 33°F takes 6 tons per plate. Maximum flow rate per plate is 50 gpm. Unit maximum flow rate: 90,000 gph or 1,500 gpm. CIP'able. Inlets: (4) 1-1/2 in. dia. S-line (sprayballs), (1) 1-1/2 in. dia. S-line fitting, (1) 2 in. dia. S-line fitting, (1) 4 in. dia. I-line fitting (product), (1) 5-1/2 in. dia. pipe (ammonia). Outlets: (2) 2 in. dia. S-line fittings, (1) 4 in. dia. S-line fitting, (1) 4-1/2 in. dia. pipe (ammonia). Overall dimensions: 11 ft. 5 in. L x 96 in. W x 84 in. H.
|
|
Click here for more information (2,233.9 KB)
|
|
|
Click On Picture
|
1990 Turbo Refrigeration HTD-Series Falling Film Plate Style Heat Exchanger
|
|
Mfg: Turbo Refrigeration
|
Model: HTDF481206 DX.
|
|
Stock No: ENAE63334b.
|
Serial No: 901220
|
|
1990 Turbo Refrigeration HTD-Series Falling Film Plate Style Heat Exchanger. Model: HTDF481206 DX. S/N: 901220. Flow rate: 200 GPM. Input horsepower: 50 hp. Refrigeration load: 42 tons. Refrigerant: R22-DX. Refrigerant temperature: 26 °F. Standard plate size: (6) 48 in. W x 60 in. H. Fluid: water (temperature on: 41 °F, temperature off: 36 °F). Reservoir capacity: 500 gallons. HTD-series (high temperature difference) units are used when fluids are either heated or chilled over large temperatures differences ranging from 5 to 60 °F. Includes insulated sump tank. Front and back double door access. Inlets: (2) 3/4 in. dia. ports (refrigerant), (1) 3 in. dia. copper tube (water supply). Outlets: (1) 1 in. dia. discharge port, (2) 2-1/2 in. dia. tubes (refrigerant suction), (1) 5 in. dia. NPT (male, pump), (1) 5 in. dia. NPT (male, overflow). Overall dimensions: 79 in. L x 66 in. W x 10 ft. 4 in. H.
|
|
Click here for more information (540.2 KB)
|
|
|
Click On Picture
|
Chester Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen
|
Model:
|
|
Stock No: HDAF525.56a
|
Serial No:
|
|
Chester Jensen Falling Film Plate Chiller. Cooling capacity: 140 tons at 224 gpm for a 26°F suction with a 15° TD. Total cooling section area: 299 sq. ft. (7) Plates with 32 corrugations each. S/N’s: 66179, 36322, 36185, 36014, 47300, 36465, 47317. Nat’l Bd: 22943, 7150, 7050, 6963, 12943, 7243, 12947. Plate dimensions: 5 ft. L x 3 ft. 9 in. H. Number of corrugations: 32. Reservoir Tank- 280 Gallon, inside straight-wall dimensions: 5 ft. 10 in. L x 3 ft. 7 in. W x 1 ft. 10 in. H. Inlets: (1) 1-1/4 in. dia. FNPT, (1) 1-1/2 in. dia. liquid port, (1) 3 in. dia. liquid port, (1) 3 in. dia. refrigerant feed port. Outlets: (1) 1-1/4 in. dia. FNPT (drain), (1) 2 in. dia. FNPT (drain), (1) 2 in. dia. S-line (overflow), (1) 2 in. dia. S-line (discharge), (1) 2-1/2 in. dia. S-line (discharge), (1) 4 in. dia. S-line (discharge), (1) 4 in. dia. refrigerant suction port. Overall dimensions: 8 ft. 10 in. L x 4 ft. W x 8 ft. H.
|
|
Click here for more information (470.3 KB)
|
|
|
Click On Picture
|
Chester Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model: BG-4-0T-4-36-60
|
|
Stock No: HDNP507.6
|
Serial No: 7229
|
|
Chester Jensen Falling Film Plate Chiller. Model: BG-4-0T-4-36-60. S/N: 7229. Number of plates: 4. Plate dimensions: 5 ft. L x 3 ft. 9 in. H. Number of corrugations: 36. Reservoir Tank- 130 Gallon, inside straight-wall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 1 ft. 5 in. H. Inlets: (1) 1-1/2 in. dia. liquid feed port, (1) 3 in. dia. refrigerant feed port. Outlets: (1) 2 in. dia. NPT (overflow), (1) 2 in. dia. NPT (discharge), (1) 3 in. dia. refrigerant suction port. Overall dimensions: 7 ft. 4 in. L x 2 ft. 8 in. W x 7 ft. 7 in. H.
|
|
Click here for more information (516.3 KB)
|
|
|
Click On Picture
|
Chester-Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen
|
Model:
|
|
Stock No: KPSB190.31
|
Serial No:
|
|
Chester-Jensen Falling Film Plate Chiller. Cooling capacity: 160 tons at 256 gpm for a 26°F suction with a 15° TD. Total cooling section area: 342sq. ft. (8) Plates with 32 corrugations each. S/N’s: 50309, 51982, 50323, 50333, 50160, 50153, 50321, 511981. Nat’l Bd: 14212, 14887, 14211, 14221, 14109, 14103, 14205, 14885. Plate dimensions: 5 ft. 2 in. W x 3 ft. 10 in. H. Number of corrugations: 32. MAWP: 200 psi @ 200 °F. Reservoir capacity- 750 Gallon, inside straight-wall dimensions: 6 ft. 10 in. L x 4 ft. W x 3 ft. 9 in. H. Inlets: (1) 1-1/2 in. dia. PVC port, (1) 1-1/2 in. dia. (media). Outlets: (1) 1-1/2 in. dia. port, (1) 2-1/2 in. dia. FNPT, (1) 4 in dia. suction port (media). Overall dimensions: 8 ft. L X 4 ft. 8 in. W X 8 ft. 2 in. H.
|
|
Click here for more information (512.7 KB)
Click here for Additional information (181.9 KB)
|
|
|
Click On Picture
|
1998 Chester Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model: B-4-0T-3-21
|
|
Stock No: SFEP1012.
|
Serial No: 9842-P
|
|
1998 Chester Jensen Falling Film Plate Chiller. Model: B-4-0T-3-21. S/N: 9842-P. Number of plates: 3. Plate dimensions: 5 ft. 2 in. L x 2 ft. 6 in. H. Number of corrugations per section: 21. Reservoir Tank- 100 Gallon, inside straight-wall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 1 ft. 3 in. H. Chester-Jensen Plate Chillers provide a sanitary means to instantly, continuously, and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point. The unique internal construction features inherent in the "Short Gas Flow" plate design minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, assures highest possible heat transfer coefficient and maximizes tons per horsepower ratio. Chiller is equipped with a 10-Gallon oil tank and controls and valves. Inlets: (1) 1 in. dia. pipe (product), (1) 2 in. dia. media pipe. Outlets: (1) 2 in. dia. S-line fitting (overflow), (1) 2 in. dia. S-line (discharge), (1) 3 in. dia. media port. Overall dimensions: 9 ft. 3 in. L x 2 ft. 9 in. x 7 ft. 11 in. H.
|
|
Click here for more information (314.8 KB)
|
|
|
Click On Picture
|
1994 Chester Jensen Ammonia Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model: XB16-01-16-32
|
|
Stock No: pHDMD467.68
|
Serial No: 9404-P
|
|
1994 Chester Jensen Ammonia Plate Chiller. Model: XB16-01-16-32. S/N: 9404-P. Chills liquid product instantly and continuously to 33°-34° F. Maximum flow rate per 32 corrugation section: 3,000 gph. (16) Plate sections. Standard section dimensions: 61-11/16 in. W x 43-1/8 in. H. Inlets: (1) 7 in. dia. port (product), (1) 5 in. dia. refrigerant feed pipe. Outlets: (1) 4 in. dia. refrigerant gas discharge pipe. 1994 Surge Tank- 150 Gallon. S/N: 43853. Nat'l Bd: 40959. MAWP @ 650 °F: 200 psi. MDMT @ 200 psi: -20 °F. Overall dimensions: 10 ft. 4 in. L x 86 in. W x 69 in. H.
|
|
Click here for more information (450.4 KB)
|
|
|
Click On Picture
|
Chester Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model:
|
|
Stock No: HD-PW229.20
|
Serial No:
|
|
Chester Jensen Ammonia Liquid Plate Chiller. Nominal cooling capacity: 300 tons at 480 gpm., holding a maximum of 15 plates. Current cooling capacity: 200 tons at 320 gpm for a 26°F suction with a 15° TD. holding currently, 10 plates. Current total cooling section area: 427.5 sq. ft. (10) plates with 36 corrugations each. Plate dimensions: 5 ft. 2 in. L x 3 ft. 7 in. H. Ref. No’s: 11602, 11604, 11598, 11600, 11599, 11595, 11596, 11603, 11599, 11601. Inlets: (2) 2 in. dia. liquid feed ports, (1) 4 in. dia. S-line fitting (liquid feed), (1) 4 in. dia. refrigerant feed port. Outlets: (1) 4 in. dia. FNPT liquid discharge, (1) 4 in. dia. refrigerant suction port, (1) 6 in. dia. FNPT liquid discharge. Overall dimensions: 8 ft. 6 in. L x 6 ft. 9 in. W x 7 ft. 2 in. H.
|
|
Click here for more information (355.3 KB)
|
|
|
Click On Picture
|
Chester Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model: BG-4-0T-4-36-60
|
|
Stock No: HDNP508.6
|
Serial No: 7230
|
|
Chester Jensen Falling Film Plate Chiller. Model: BG-4-0T-4-36-60. S/N: 7230. Number of plates: 4. Plate dimensions: 5 ft. L x 3 ft. 9 in. H. Number of corrugations: 36. Reservoir Tank- 130 Gallon, inside straight-wall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 1 ft. 5 in. H. Inlets: (1) 1-1/4 in. dia. liquid feed port, (1) 1-1/2 in. dia. liquid feed port, (1) 3 in. dia. refrigerant feed port. Outlets: (1) 2 in. dia. NPT (overflow), (1) 2 in. dia. NPT (discharge), (1) 3 in. dia. refrigerant suction port. Overall dimensions: 7 ft. 7 in. L x 3 ft. 3 in. W x 6 ft. 10 in. H.
|
|
Click here for more information (507.1 KB)
|
|
|
Click On Picture
|
2000 Chester-Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen
|
Model: XB4-0T-2-32
|
|
Stock No: DCBJ884.29
|
Serial No: 0013-P
|
|
2000 Chester-Jensen Falling Film Plate Chiller. Model: XB4-0T-2-32. S/N: 0013-P. Nat’l Bd: 2490 and 24899. Refrigerant: R-22. Number of plates: 2. Plate dimensions: 5 ft. 9 in. L x 3 ft. 9 in. H. Number of corrugations: 32. MAWP: 200 psi @ 200°F. MDMT: -20°F @ 200 psi. Reservoir Tank- 40 Gallon, inside straight-wall dimensions: 5 ft. 6 in. L x 2 ft. 4 in. W x 9 in. H. Chester Jensen Plate Chillers provide a sanitary means to instantly, continuously, and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point. The unique internal construction features inherent in the "Short Gas Flow" plate design minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, assures highest possible heat transfer coefficient and maximizes tons per horsepower ratio. Inlets: (1) 3/4 in. dia. hot gas infeed port, (1) 1 in. dia. high pressure liquid feed port, (1) 2 in. dia. refrigerant feed port, (1) 2 in. dia. liquid feed port. Outlets: (1) 3 in. dia. S-line liquid discharge, (1) 3 in. dia. refrigerant suction port. Overall dimensions: 88 in. L x 32-1/2 in. W x 68 in. H.
|
|
Click here for more information (590.3 KB)
|
|
|
Click On Picture
|
1992 Chester-Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model: XB-4-0T-2-21
|
|
Stock No: SFEP1016.
|
Serial No: 9236-P
|
|
1992 Chester-Jensen Falling Film Plate Chiller. Model: XB-4-0T-2-21. S/N: 9236-P. Number of plates: 2. Plate dimensions: 5 ft. 2 in. L x 2 ft. 6 in. H. Number of corrugations: 21. Reservoir Capacity: 420 Gallon, inside straight-wall dimensions: 5 ft. 5 in. L x 2 ft. 6 in. W x 4 ft. 2 in. H. Chester-Jensen Plate Chillers provide a sanitary means to instantly, continuously, and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point. The unique internal construction features inherent in the "Short Gas Flow" plate design minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, assures highest possible heat transfer coefficient and maximizes tons per horsepower ratio. Inlets: (1) 1 in. dia. port (product), (1) 1 in. dia. media port. Outlets: (1) 1 in. dia. NPT, (1) 2 in. dia. NPT, (1) 2 in. dia. NPT (overflow), (1) 2 in. dia. media discharge. Overall dimensions: 7 ft. L x 2 ft. 11 in. W x 8 ft. 8 in. H.
|
|
Click here for more information (232.4 KB)
|
|
|
Click On Picture
|
APV Crepaco Amerio Horizontal Plate Freezer
|
|
Mfg: APV Crepaco
|
Model: Amerio
|
|
Stock No: EELD809.13
|
Serial No: C-0947
|
|
APV Crepaco Amerio Horizontal Plate Freezer. S/N: C-0947. (17) 5 ft. 1 in. L x 3 ft. 8 in. W plates. Plate material: sea water resistant aluminum. Distance between plates: 2-7/16 in. (25) 1 ft. 8-3/4 in. L x 11-3/4 in. W x 2-1/4 in. H. product trays. Stainless Steel Control Panel, 2 ft. W x 2 ft. H. Plate freezer used for the rapid freezing of seafood, meats and meat products, poultry, vegetables, and other food products. Inlets: (2) 3/4 in. nitrogen infeed FNPT fittings, (1) 5 ft. 9 in. W x 6 ft. 9 in. H product infeed. Outlets: (1) 1-1/4 in. dia. FNPT fitting, (1) 5 ft. 9 in. W x 6 ft. 9 in. H product discharge. Overall dimensions: 8 ft. 8 in. L x 6 ft. 3 in. W x 8 ft. 11 in. H.
|
|
Click here for more information (568.2 KB)
|
|
|
Click On Picture
|
Chester Jensen Film Plate Chiller
|
|
Mfg: Chester Jensen
|
Model: 4-2-24-24
|
|
Stock No: HDAF526.51
|
Serial No: 4-248-125.
|
|
Chester Jensen Film Plate Chiller. Size: 4-2-24-24, S/N: 4-248-125. (8) 60 in. L x 30 in. W plate with 24 Coils. Reservoir – 25 Gallons. Inlets: (1) 1-1/2 in. dia. port, (1) 2 in. dia. port. Outlets: (1) 1-1/2 in. dia. port, (1) 2 in. dia. port. (1) 2 in. dia. S-Line. Overall dimensions: 87 in. L x 23 in. W x 89 in. H.
|
|
Click here for more information (199.3 KB)
|
|
|
Click On Picture
|
1999 Brine Chill Cabinet
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: RBFM732.65
|
Serial No: 232612940NLBC4
|
|
1999 Brine Chill Cabinet. S/N: 232612940NLBC4, 3-door, 3 lane rail style, 196 in. w x 10 ft. 4 in. x 31 ft.
|
|
|
|
|
Click On Picture
|
Stainless Steel Ammonia Plate Chiller
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SFEP044.4
|
Serial No:
|
|
Stainless Steel Ammonia Plate Chiller. (3) 60 in. L x 31 in. H plates. Number of corrugations: 16. The Plate Chillers provide a sanitary means to instantly, continuously, and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point. The unique internal construction features inherent in the "Short Gas Flow" plate design minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, assures highest possible heat transfer coefficient and maximizes tons per horsepower ratio. Spray bridge dimensions: 59 in. L x 12 in. W. Sump tank dimensions: 68 in. L x 19-1/2 in. W. Inlets: (1) 2 in. pipe (media), (1) 2 in. 'S' line (product). Outlets: (1) 1 in. pipe (discharge), (1) 2 in. pipe (media). Overall dimensions: 73 in. L x 26 in. W x 75 in. H.
|
|
Click here for more information (211.1 KB)
|
|
|
Click On Picture
|
Chester-Jensen Stainless Steel Plate Cooler
|
|
Mfg: Chester Jensen
|
Model:
|
|
Stock No: pGKD154.25
|
Serial No: 8604CP
|
|
Chester-Jensen Stainless Steel Plate Cooler. Type A-4-1. S/N: 8604CP. With 3/4 hp pump. Plate size 5 ft. L x 46 in. H. Overall dimensions 6 ft. L x 6 ft. W x 28 in. Deep.
|
|
|
|
|
Click On Picture
|
1993 Chester-Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen
|
Model: B-4-0T-4-32
|
|
Stock No: KAAM0240.17
|
Serial No: 9355-P
|
|
1993 Chester-Jensen Falling Film Plate Chiller. Model: B-4-0T-4-32. S/N: 9355-P. (4) 5 ft. L x 4 ft. 9 in. H stainless steel sections. Number of corrugations: 32. MAWP: 200 psi @ 200 °F. MDMT: -20 °F @ 200 psi. Reservoir capacity: 100 gal. Inlets: (1) 3 in. dia. port (water/solution), (1) 3 in. dia. media port. Outlets: (1) 2 in. dia. NPT (overflow), (1) 3 in. dia. port (water/solution), (1) 3 in. dia. media port. Overall dimensions: 6 ft. 10-1/2 in. L x 2 ft. 9 in. W x 6 ft. 9 in. H (8 ft. 1 in. H with feet). ). (ACN313).
|
|
Click here for more information (530.7 KB)
|
|
|
Click On Picture
|
1999 Mueller Recirculated Ammonia Falling Film Plate Chiller
|
|
Mfg: Paul Mueller Co.
|
Model: 1050 FFC
|
|
Stock No: KAAM0338.32
|
Serial No: 234728-1
|
|
1999 Mueller Recirculated Ammonia Falling Film Plate Chiller. Model: 1050 FFC. S/N: 234728-1. (3) 8 ft. W x 4 ft. H heat transfer sections. Design pressure: 250 psi. Design temperature: 200 °F. Test pressure: 331 psi. Volume: 1.26 cu. ft. Refrigerant: recirculated ammonia. Reservoir capacity: 1050 gallon. The Mueller 4 x 8 enclosed-type falling film chiller is fully enclosed to ensure product is free from airborne particles and is easily accessible through gasketed doors. Comprised of 304 stainless steel water contact surfaces and outer jacket, this unit has expansion capabilities to include 24 plates. Inlets: (1) 4 in. dia. NPT (water/solution), (1) 4 in. dia. refrigerant infeed port. Outlets: (2) 2 in. dia. FNPT (chilled water/solution) discharge, (1) 4 in. dia. FNPT overflow, (2) 4 in. dia. refrigerant ports. Overall dimensions: 12 ft. 1 in. L x 8 ft. 10 in. W x 7 ft. 7-1/2 in. H. (ACN360). FAD
|
|
Click here for more information (464.7 KB)
Click here for Plate Chiller Literature (929.9 KB)
|
|
|
Click On Picture
|
Chester Jensen Stainless Steel Plate Water Chiller with 140 Gallon Surge Drum
|
|
Mfg: Chester Jensen
|
Model:
|
|
Stock No: scEELD669C.12a
|
Serial No:
|
|
Chester Jensen Stainless Steel Plate Water Chiller with 140 Gallon Surge Drum. Cooling capacity: 100 tons at 160 gpm for a 26°F suction with a 15° TD. Total cooling section area: 213.75 sq. ft. (5) Plates with 36 corrugations each. Plate s/n's: 36057, 36060, 36075, 35947, 36047. Plate Nat'l Bd. No's: 6985, 6988, 6999, 6916, 6975. Plate dimensions: 5 ft. 2 in. L x 3 ft. 9 in. H. Number of corrugations per plate: 36. Maximum design pressure: 300 psig. Minimum temperature: -50°F. Reservoir capacity: 160 gal. Inside straight-wall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 1 ft. 9 in. H. Inlets: (1) 4 in. dia. port, (1) 2 in. dia. port. Outlets: (1) 4 in. dia. port, (1) 3-1/2 in. dia. flanged port. Overall dimensions: 8 ft. 5-1/2 in. L x 3 ft. 9 in. W x 7 ft. 5 in. H. Surge Drum- 140 Gallon, inside straight-wall dimensions: 2 ft. dia. x 6 ft. L. (2) Hansen Technologies Float Switches, Type: HLL, refrigerants: NH3, R-12, R-22, R-502, power supply: 120/240 V, 10 amps, 50/60 Hz. (2) Hansen Technologies Relief Valves, Cat. No: H5601, capacity: 476 scfm, set pressure: 150 psi. Inlets: (1) 1 in. dia. liquid refrigerant port. Outlets: (2) 1 in. dia. NPT (safety relief), (2) 3 in. dia. wet suction ports, (1) 4 in. dia. liquid outlet, (1) 4 in. dia. compressor suction port. Inlets: (1) 1 in. dia. liquid feed port. Outlets: (2) 3 in. dia. compressor suction ports, (1) 4 in. dia. liquid outlet port, (1) 4 in. dia. wet suction port. Overall dimensions: 8 ft. 8 in. L x 3 ft. 2 in. W x 5 ft. 6 in. H.
|
|
Click here for more information (671.6 KB)
|
|
|
Click On Picture
|
Turbo Refrigeration Company Falling Film Plate Chiller
|
|
Mfg: Turbo
|
Model: HTDA480603
|
|
Stock No: pBBCF087.40
|
Serial No: 8801600
|
|
Turbo Refrigeration Company Falling Film Plate Chiller. Model: HTDA480603. S/N: 8801600. Number of plates: 3. Plate dimensions: 4 ft. W x 5 ft. H plates. Number of corrugations: 32. Reservoir Tank- 1,040 Gallon, inside straight-wall dimensions: 7 ft. 4 in. L x 5 ft. 4 in. W x 3 ft. 7 in. H. Inlets: (1) 1-1/2 in. dia. refrigerant feed port, (1) 2 in. dia. S-line fitting (liquid infeed). Outlets: (2) 2 in. dia. S-line fittings (liquid discharge), (1) 3 in. dia. S-line fitting (liquid discharge), (1) 4 in. dia. NPT overflow drain port, (1) 4 in. dia. refrigerant suction port. Overall dimensions: 7 ft. 8 in. L x 5 ft. 8 in. W x 10 ft. 7 in. H.
|
|
Click here for more information (360.4 KB)
|
|
|
Click On Picture
|
Stainless Steel Falling Film Plate Chiller
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: pBBCF129.60
|
Serial No:
|
|
Stainless Steel Falling Film Plate Chiller. Refrigerant: NH3 (ammonia). Number of plates: 16. Plate dimensions: 5 ft. 7 in. L x 3 ft. 8 in. H. Number of corrugations: 22. Reservoir Tank- 590 Gallon, inside straight-wall dimensions: 6 ft. 4 in. L x 7 ft. 3 in. W x 2 ft. H. Inlets: (1) 1-1/2 in. dia. refrigerant feed port, (1) 2 in. dia. liquid feed. Outlets: (1) 2 in. dia. NPT liquid discharge, (1) 4 in. dia. refrigerant suction port, (1) 6 in. dia. female I-line discharge. Overall dimensions: 10 ft. 1 in. L x 6 ft. 8 in. W x 7 ft. 5 in. H.
|
|
Click here for more information (471.5 KB)
|
|
|
Click On Picture
|
Chester Jensen Falling Film Plate Chiller
|
|
Mfg: Chester Jensen
|
Model:
|
|
Stock No: pBBCF158C.35
|
Serial No:
|
|
Chester Jensen Falling Film Plate Chiller. S/N's: 36004, 37642, 37456, 37552, 37690, 37547, 37639, 37589. Nat'l Bd: 6955, 7989, 7855, 7925, 8024, 7920, 7986, 7952. Number of plates: 8. Plate dimensions: 5 ft. W x 3 ft. 9 in. H. Number of corrugations: 36. MAWP: 200 psi @ 200°F. Reservoir capacity: 100 gal, inside straight-wall dimensions: 7 ft. L x 3 ft. W x 8 in. H. Inlets: (1) 3 in. dia. refrigerant feed port. Outlets: (1) 4 in. dia. S-line drain port, (2) 3 in. dia. refrigerant suction ports. Overall dimensions: 9 ft. 4 in. L x 3 ft. 4-1/2 in. W x 5 ft. 1/2 in. H.
|
|
Click here for more information (199.9 KB)
Click here for Additional Information (181.9 KB)
|
|
|
Click On Picture
|
Chester Jensen Ammonia Plate Chiller
|
|
Mfg: Chester Jensen
|
Model: XB-36-OT-36-32
|
|
Stock No: pCFPH708.
|
Serial No: 8908-P
|
|
Chester Jensen Ammonia Plate Chiller. Model: XB-36-OT-36-32. S/N: 8908-P. Cooling capacity: 720 tons at 1152 gpm for a 26°F suction with a 15° TD. (36) Plates with 32 corrugations each. Total cooling section area: 1,539 sq. ft. Plate dimensions: 5 ft. W x 45 in H. Chester Jensen plate chillers continuously and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point by utilizing a unique internal construction feature inherent in the "Short Gas Flow" plate design that minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, and assures the highest possible heat transfer coefficient, thus maximizing tons per horsepower ratio. Stainless steel tank. 14 ft. L x 7 ft.10 in. W x 7 ft.10 in. H.
|
|
Click here for more information (149.6 KB)
|
|
|
Click On Picture
|
Dean Products Inc. Immersion Bank Assembly
|
|
Mfg: Dean Products Inc.
|
Model:
|
|
Stock No: KRZY002.
|
Serial No: 14405
|
|
Dean Products Inc. Immersion Bank Assembly. S/N: 14405. MAWP: 238 psi @ 366 °F. Consists of (10) 15 ft. 8 in. L x 24 in. W heat transfer immersion sections. 304 SS. Reduces condensate build-up common with typical "header" and "multiple header" die-formed embossed plate heat exchangers. Reduces "fatigue failure" caused by condensate build-up and problems common to conventional pre-formed heat transfer surfaces. Applications include high pressure, high temperature, or corrosive environments. Inlets/outlets: 3 in. dia. ports. Overall dimensions: 16 ft. 3 in. L x 32 in. W x 23 in. H.
|
|
Click here for more information (185.4 KB)
|
|
|
Click On Picture
|
Dean Products Inc. Immersion Bank Assembly
|
|
Mfg: Dean Products Inc.
|
Model:
|
|
Stock No: KRZY003.
|
Serial No: 14405
|
|
Dean Products Inc. Immersion Bank Assembly. S/N: 14405. MAWP: 238 psi @ 366 °F. Consists of (10) 15 ft. 8 in. L x 24 in. W heat transfer immersion sections. 304 SS. Reduces condensate build-up common with typical "header" and "multiple header" die-formed embossed plate heat exchangers. Reduces "fatigue failure" caused by condensate build-up and problems common to conventional pre-formed heat transfer surfaces. Applications include high pressure, high temperature, or corrosive environments. Inlets/outlets: 3 in. dia. ports. Overall dimensions: 16 ft. 3 in. L x 32 in. W x 23 in. H.
|
|
Click here for more information (144.2 KB)
|
|
|
Click On Picture
|
2002 Chester-Jensen Chiller Plate
|
|
Mfg: Chester Jensen
|
Model:
|
|
Stock No: CAJB002.
|
Serial No: 71953, 71955
|
|
(2) 2002 Chester-Jensen Chiller Plates. S/N's: 71953 and 71955. P/N: B-3559. Maximum pressure: 100 psi. (21) Corrugations. Inlets/outlets: (1) 1-1/2 in. dia. ports. Overall dimensions: 69 in. L x 2-1/2 in. W x 30 in. H.
|
|
Click here for more information (149.3 KB)
|
|
|
Click On Picture
|
Bally Case & Cooler Refrigeration Package
|
|
Mfg: Bally
|
Model: FA2-750
|
|
Stock No: BAPF117A.1
|
Serial No: 83456
|
|
Bally Case & Cooler Refrigeration Package. Model FA2-750. S/N 83456, w/Copelamatic compressor. Model. 9RS2-0760-TFC. S/N 83C777G1.
|
|
|
|
|
Click On Picture
|
Mojonnier Cabinet Cooler Stainless Steel
|
|
Mfg: Mojonnier
|
Model: 868
|
|
Stock No: 85.149
|
Serial No: 1168
|
|
Mojonnier Cabinet Cooler Stainless Steel. Model: 868. S/N: 1168. Number of sections: 16 (2 sections per plate). Plate dimensions: 5 ft. W x 5 ft. H. Number of corrugations per section: 24. Tank capacity: 70 gal. Inlets: (1) 2-1/2 in. dia. ACME fitting (distribution plate), (2) 3 in. dia. FNPT (media). Outlets: (1) 1/2 in. dia. FNPT, (1) 2-1/2 in. dia. ACME fitting (drain), (2) 3 in. dia. FNPT (media). Overall dimensions: 6 ft. 4 in. L x 2 ft. 8 in. W x 8 ft. 1 in. H. FAD
|
|
Click here for more information (489.0 KB)
|
|
|
Click On Picture
|
Mojonnier Stainless Steel Cabinet Plate Chiller
|
|
Mfg: Mojonnier
|
Model: 4-2-36
|
|
Stock No: 65.TR-514-B
|
Serial No: 771
|
|
Mojonnier Stainless Steel Cabinet Plate Chiller. Model: 4-2-36. S/N: 771. Number of plates: 4. Plate dimensions: 5 ft. W x 3 ft.10 in. H. Number of sections per plate: 8. Top section dimensions: 5 ft. W x 1ft. 4 in. H. Number of corrugations of top sections: 12. Bottom section dimensions: 5 ft. W x 2ft. 6 in. H. Number of corrugations of bottom sections: 24. Perforated distribution plate for product infeed onto the plates is not immediately available with this unit. Tank capacity: 40 gal. Inlets: (2) 2 in. dia. FNPT (media), (1) 2-1/2 in. L x 3 in. W product port. Outlets: (2) 2 in. dia. FNPT (media), (2) 2 in. dia. S-line fittings (product), (1) 2 in. dia. ACME fitting (drain). Overall dimensions: 6 ft. 8 in. L x 2 ft. W x 6 ft. 9 in. H. FAD
|
|
Click here for more information (490.8 KB)
|
|
|
Click On Picture
|
Chester Jensen Stainless Steel Chiller Unit
|
|
Mfg: Chester Jensen
|
Model:
|
|
Stock No: RBFM985.40
|
Serial No: 27657
|
|
Chester Jensen Stainless Steel Chiller Unit. S/N: 27657. National Board No. 3849. 200 psi @ 200 °F, shell thickness .045, with stainless steel Tri-Clover 3 x 2 centrifugal pump with 5 hp motor, 3 x 3 diaphragm pump.
|
|
|
|
|
Click On Picture
|
Chester Jensen Stainless Steel Chiller Unit
|
|
Mfg: Chester Jensen
|
Model:
|
|
Stock No: RBFM986.35
|
Serial No:
|
|
Chester Jensen Stainless Steel Chiller Unit. With stainless steel 3-1/2 x 2-1/2 centrifugal pump with 3hp motor, 3 x 3 diaphragm pump.
|
|
|
|
|
Click On Picture
|
Paul Mueller Plate Chiller
|
|
Mfg: Paul Mueller
|
Model:
|
|
Stock No: RBFM706.65
|
Serial No: E22977
|
|
Paul Mueller Plate Chiller. S/N: E22977. National Board No. 12826. All stainless steel cabinet, 12 plates, dimple jacketed, 150 psi.
|
|
|
|
|
Click On Picture
|
Chester Jensen Ammonia Turbo Chiller
|
|
Mfg: Chester Jensen
|
Model: XC-12-6-32
|
|
Stock No: HDWR311.10
|
Serial No: 9203CP
|
|
Chester Jensen Ammonia Turbo Chiller. Size XC-12-6-32. S/N: 9203CP. 64 in. W x 80 in. L x 75 in. H - Complete with All stainless steel exterior, 7.5 hp pump and accumulator.
|
|
|
|
|
Click On Picture
|
Chester Jensen S/S Plate Type Cabinet Chiller
|
|
Mfg: Chester Jensen/York
|
Model: XB4-07-2-32
|
|
Stock No: DCBJ884
|
Serial No: 0013-P
|
|
Chester Jensen S/S Plate Type Cabinet Chiller, Model XB4-07-2-32, S/N 0013-P, Includes (4) S/S 45" x 60" Plates, and Freon Expansion Valves & Controls. Refrigeration Supply is a Krack 40 HP Outdoor Compressor/Condenser package on Roof (Model SLD04LD-H2K)
|
|
|
|
|
Click On Picture
|
SOLD Water Chiller
|
|
Mfg: Not Specified
|
Model: HFA144-18-20
|
|
Stock No: 400-SC-3951
|
Serial No: 920620
|
|
Turbo water chiller, 1992, model no. HFA144-18-20, serial no. 920620, with RVS 30 inch x 8 foot flood drum, Nat'l Brd no. 5115, and support platform.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Plate Chiller
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 70-SC-1866
|
Serial No:
|
|
4 plate chiller with 28in x 30in plates and insulated housing.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Reco Super Chiller
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 30-SC-6171
|
Serial No:
|
|
Reco Super Chiller, 16 plate, housing only.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Square Chiller Plate
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 24
|
Serial No:
|
|
Square Chiller Plates, 13 3/8 in x 25 1/2 in, 3 in spacing, 9 in W x 25 in H x 26 in L.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Seattle Ice Equipment Glacier Icemaker Model 4x15
|
|
Mfg: Seattle Ice Equipment Corp.
|
Model: 4x15
|
|
Stock No: LCNM008b.
|
Serial No: 213
|
|
Seattle Ice Equipment Corp. Glacier Icemaker Model 4x15, S/N 213. Manufactured date November 19,1980. National Board Number 2920. Union Tank Works, Inc. 150 psi @ 300°F-50°F @ -7.56 psi S/N 5158. Built in 1981. Baldor Motor, hp 1.3, Volts 208-230/460, Amps 5.0-4.8/2.4, 3 phase, rpm 1725. Overall Dimensions 94 in. W x 110 in. L x 99 in. H.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Plate Chiller
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 36a.1866
|
Serial No:
|
|
Chiller - 4 plate chiller with 28in x 30in plates and insulated h.ousing 22-1/2in W x 44-1/2in D x 64in H, estimated weight 650lbs, 2in liquid feed, 2 1/2in suction
SOLD
|
|
|
|
|
Click On Picture
|
SOLD CIMCO Brine Chiller
|
|
Mfg: Cimco
|
Model:
|
|
Stock No: 208
|
Serial No: 228950A
|
|
CIMCO Brine Chiller. S/N 228950A 1997, shell side 250 psi at 150 °F, min design temp -20 °F at 250 and -50 °F at 150 psi. Carbon steel contruction. Flooded ammonia operation. Evaporating temperature of ammonia is -45 °F. Tube side fluid has a 1.2 specific gravity for a calcium chloride brine. Chiller will take 360 gpm of brine from -29 °F to -32 °F. Pressure drop on the tube is 5 psi. Rated at 45 ton net refrigeration.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD 1994 Chester Jensen Sanitary Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model: XB4-OT-2-21
|
|
Stock No: PJFS003.
|
Serial No: 9427-P
|
|
1994 Chester Jensen Sanitary Plate Chiller. Model: XB4-OT-2-21, S/N: 9427-P. Stainless steel. Refrigerant: ammonia. (2) Plate coolers: 61-1/2 in. L x 29 in. H. (21) corrugations/plate. 24 sq.ft. cooling section/plate. Cooler sections are certified for 200 psig @ 200 °F. Collecting tank has 2 in. of insulation on sides and bottom. Inner lining of stainless steel. Collecting tank overall dimensions: 65 in. L x 28 in. W x 28 in. H. (2) Covers; removable for easy cleaning. Maximum flow rate per 24 corrugation section is 2000 gph. Allowable refrigeration: 15 tons. Overall dimensions: 91 in. L x 38 in. W x 84 in. H.
SOLD
|
|
Click here for more information (338.3 KB)
|
|
|
Click On Picture
|
SOLD 1995 Pre-Wel Mfg. Corp. Chilled Water Cooling Conveyor System
|
|
Mfg: Pre-Wel Mfg. Corp.
|
Model:
|
|
Stock No: DKI01.
|
Serial No:
|
|
1995 Pre-Wel Mfg. Corp. Chilled Water Cooling Conveyor System. Submerged cooling conveyor with 42 in. wide Intralox belt (2 in. flights on 6-1/2 in. centers). Stainless steel cooling tank- 29 ft. L x 4 ft. W (inside) x 2 ft. H. Powered jacks raise conveyor for cleaning. Height of conveyor discharge- 48 in. Attached 16 ga stainless steel cover for infeed end of cooling tank. Chester Jensen Chiller, Model B-120T-9-32 mounted above cooling tank. Sanitary pump with piping and fittings. Hycor Rotostrainer, Model RSK, with .028 in. screen platform and control panel. Removed from operation in 1999. System cost in 1995: $190,000.00.
SOLD
|
|
Click here for more information (376.5 KB)
|
|
|
Click On Picture
|
SOLD Chester Jensen Ammonia Plate Chiller Unit
|
|
Mfg: Chester Jensen/York
|
Model: B-12-OT-12-36
|
|
Stock No: DPFI418.3a
|
Serial No: 7821
|
|
Chester Jensen Ammonia Plate Chiller Unit. Model: B12- 0T-12-36. S/N: 7821. Chills liquid product instantly and continuously to 33°-34°F. Custom design with 36 corrugations per section. Approximate flow rate: 3,000 gph. Number of sections: 12. Inlets: (2) 2 in. dia. Q-line fittings, (1) 4 in. dia. refrigerant feed pipe. Outlets: (1) 2 in. dia. refrigerant gas discharge pipe, (2) 2 in. dia. Q-line fittings, (1) 4 in. Q-line fitting. Overall dimensions: 94 in. L x 71 in. W x 92 in. H.
SOLD
|
|
Click here for more information (250.6 KB)
|
|
|
Click On Picture
|
SOLD 1993 Chester Jensen Ammonia Instant Plate Chiller
|
|
Mfg: Chester Jensen/York
|
Model: B12-0T-12-32
|
|
Stock No: DPFI417.7
|
Serial No: 93/6-P
|
|
1993 Chester Jensen Ammonia Instant Plate Chiller. Model: B12-0T-12-32. S/N: 93/6-P. Chills liquid product instantly and continuously to 33°-34° F. Maximum flow rate per 32 corrugation section: 3,000 gph. Number of sections: 11. Standard section dimensions: 61-11/16 in. W x 43-1/8 in. H. Inlets: (1) 2 in. dia. Q-line fitting, (1) 4 in. dia. refrigerant feed pipe. Outlets: (1) 2 in. dia. refrigerant gas discharge pipe, (2) 3 in. dia. pipes. Overall dimensions: 6 ft. 10 in. L x 65 in. W x 92 in. H.
SOLD
|
|
Click here for more information (227.7 KB)
|
|
|
Click On Picture
|
SOLD Union Tankworks North Star Ice Maker
|
|
Mfg: North Star Ice
|
Model: M-60.75
|
|
Stock No: LCNM009b.
|
Serial No: 3933
|
|
Union Tankworks North Star Ice Maker. Model M-60.75, S/N 3933. National Board Number 1353. 150 psi @ 300°F -50°F @ -7.56 psi USC - 66. Overall dimensions 80 in. W x 104 in. L x 88 in. H.
SOLD
|
|
|
|
|
Click On Picture
| | |
