|
|
Click On Picture
|
APV 2 Effect Falling Film Plate Evaporator with TVR
|
|
Mfg: APV
|
Model: FFPE & R-86
|
|
Stock No: ENDX672.8a
|
Serial No: 16283
|
|
APV 2 Effect Falling Film Plate Evaporator with TVR.
The 1st effect is an APV Falling Film Plate pack. It is a painted carbon steel frame with 316 SS plates and product contact surfaces.
The 2nd effect is an APV R86 Plate. . It is a painted carbon steel frame with 316 SS plates and product contact surfaces.
This system is equipped with a legal Pasteurizer for a preheating system and a Thermocompressor that increases the overall steam efficiency to 3 to 1. It is equipped with a shell and tube surface condenser and a 2 stage flash cooling system
This system was originally designed to concentrate dairy products to high solids. This system will be ideal for heat sensitive food grade products going to high concentrations
|
|
Click here for more information (440.4 KB)
|
|
|
Click On Picture
|
APV Finisher Model R86
|
|
Mfg: APV
|
Model: R86
|
|
Stock No: ENDX673.8a
|
Serial No: 16283
|
|
APV Finisher. Model R86. S/N 16283. Heating surface area (total): approx. 1454 sq. ft. Inlet/outlet: 6 in.
|
|
|
|
|
Click On Picture
|
APV HTST Skid with Titanium Plates
|
|
Mfg: APV
|
Model: SR-35
|
|
Stock No: BIIR05.
|
Serial No: 16032
|
|
APV HTST Skid with Titanium Plates. Model: SR-35. S/N: 16032. APV Heat Exchanger: (55) Titanium plates. (2) divider plates. Heat transfer surface area: 235.27 (approx.). Holding tube diameter: 2 in. Capacity: 2-1/2 gal. Heat transfer surface area: 8 sq. ft. (approx.). Carver Centrifugal Pump, Type: 2.5x2x7LA-33D, S/N: 82861, 3450 rpm (final), impeller diameter: 5-1/2 in. Baldor Industrial Motor, 5 hp, 3450 rpm, 208-230/460 V, 13.2-12/6 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. S-line fitting, (1) 3 in. dia. with a 7 in. dia. flange and (4) 3/4 in. dia. attachment holes at a center-to-center distance of 6 in. Outlets: (1) 3 in. dia. S-line fitting, (2) 3 in. dia. with a 7 in. dia. flange and (4) 3/4 in. dia. attachment holes at a center-to-center distance of 6 in. Overall dimensions: 9 ft. 10 in. L x 68 in. W x 95 in. H.
|
|
Click here for more information (276.9 KB)
|
|
|
Click On Picture
|
Crepaco CR5 Plate Heat Exchanger
|
|
Mfg: Crepaco
|
Model: CR5
|
|
Stock No: HDAF957.62
|
Serial No: C-1163
|
|
Crepaco Plate Heat Exchanger. Model: CR5. S/N: C-1163. Number of stainless steel plates: 214. Heat transfer surface area: approx. 1337 sq. ft. Fixed end ports: (4) 4 in. dia. S-Line (4) Divider Inlets: (8) 2 in dia. NPT fittings (male). Outlets: (7) 2 in. dia. NPT fittings (male). Terminal ports: (4) 4 in. dia. S-Line. Vickers Vane Pump, Reliance Motor, 5 hp, 1730 rpm, 230/460 V, 14/7 amps, 60 Hz, 3 phase. Inlet/outlets: 1 in. dia. NPT (female) port. Overall dimensions: 11 ft. 8 in. L x 36 in. W x 8 ft. 6-1/2 in. H.
|
|
Click here for more information (218.7 KB)
|
|
|
Click On Picture
|
Alfa Laval Plate Heat Exchanger
|
|
Mfg: Alfa Laval
|
Model: H10-FMC
|
|
Stock No: HDAF531.79
|
Serial No: 4239
|
|
Alfa Laval Plate Heat Exchanger. Model: H10-FMC. Current Model: Tetra-Pack C10-SH. S/N: 4239. Stainless steel plates: (255). Heat transfer surface area: approx. 1723 sq. ft. Maximum working pressure: 145 psig. Maximum working temperature: 285 °F. Fixed end ports: (2) 3 in. dia. ACME inlets. Dividers Inlets: (2) 3 in dia. ACME. Outlets: (3) 3 in. dia. ACME, (1) 2-1/2 in. dia. ACME. Terminal ports: (2) 4 in. dia. ACME. Overall dimensions: 11 ft. 3 in. L x 34 in. W x 97 in. H. (ACN830).
|
|
Click here for more information (186.2 KB) Click here for Technical Data (75.7 KB)
|
|
|
Click On Picture
|
1998 APV/FES Plate Heat Exchanger
|
|
Mfg: APV/FES
|
Model: 8WP-C2-1
|
|
Stock No: ASAC007.
|
Serial No: 339521
|
|
1998 APV/FES Plate Heat Exchanger. Model: 8WP-C2-1. S/N: 339521. Nat'l Bd: 1711. Dwg: 4339520001. Number of plates: 172, (86 plate packs). Heat transfer surface area: approx. 2,408 sq. ft. Plate pack dimensions (max/min): 23.97/23.63 in. Design pressure hot/cold side: 150/300 psig. Test pressure hot/cold side: 225/450 psig. Design temperature max/min: 185/-20 °F. Chamber 1 MAWP: 150 psi @ 185 °F. Chamber 2 MAWP: 300 psi @ 185 °F. Chamber 1 MDMT: -20 °F @ 150 psi. Chamber 2 MDMT: -20 °F @ 300 psi. This unit is capable of cooling 600 GPM of 35% Propylene Glycol from +65 F to +35F ( about 700+ TR capacity), using flooded NH3 @ about +28F suction temp. Inlets: (1) 8 in. dia. port (product), (1) 2 in. dia. port (media). Outlets: (1) 8 in. dia. port (product), (1) 6 in. dia. port (media). Overall dimensions: 9 ft. L x 3 ft. W x 9 ft. H. (ACN495).
|
|
Click here for more information (239.4 KB)
|
|
|
Click On Picture
|
APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: CR5 HYDRAULIC
|
|
Stock No: 450.HDVI184.181a
|
Serial No: 22839
|
|
APV Plate Heat Exchanger. Model: CR5 HYDRAULIC. S/N: 22839. (2) dividers. (3) sections. Number of plates: (49) header, (101) middle, (73) floater. Total : 223. Heat Transfer Surface Area: approx. 1200 sq.ft. Fixed end ports: (4) 3 in. dia. Q-line fittings. Divider Inlets: (3) 2-1/2 in. dia. Q-line fittings, (1) 2-1/2 in. dia. S-line fitting. Outlets: (2) 2-1/2 in. dia. Q-line fittings, (1) 2-1/2 in. dia. S-line fitting. Terminal Ports: (4) 3 in. dia. Q-line fittings. Overall dimensions: 11 ft. L x 3 ft. W x 8 ft. 5 in. H.
|
|
Click here for more information (161.7 KB)
|
|
|
Click On Picture
|
Alfa Laval Plate Heat Exchanger
|
|
Mfg: Alfa Laval
|
Model: H10-FMC (Tetra Pak C10-SH)
|
|
Stock No: HDAF532.42a
|
Serial No: 4237
|
|
Alfa Laval Plate Heat Exchanger. Model: H10-FMC. Current Model: Tetra-Pak C10-SH. S/N: 4237. Stainless steel plates: (110). Heat transfer surface area: approx. 675 sq. ft. Maximum working pressure: 145 psig. Maximum working temperature: 285 °F. Fixed end ports: (1) 3 in. dia. ACME inlet, (1) 3 in. dia. ACME outlet. Divider: (1) 3 in. dia. ACME inlet, (2) 3 in. dia. ACME outlet. Movable end ports: (1) 3 in. dia. ACME inlet, (1) 3 in. dia. ACME outlet. Overall dimensions: 9 ft. L x 34-1/2 in. W x 8 ft. 4 in. H. (ACN620).
|
|
Click here for more information (151.3 KB) Click here for Technical Data (75.7 KB)
|
|
|
Click On Picture
|
Tranter Inc. Superchanger Plate Heat Exchanger
|
|
Mfg: Tranter Inc.
|
Model: S-3-HP-154
|
|
Stock No: SHCA1181.3a
|
Serial No: P-30014-H. S.O: 81343
|
|
Tranter Inc. Superchanger Plate Heat Exchanger. Model: S-3-HP-154. S/N: P-30014-H. S.O: 81343. Stainless steel plates: 52. Heat transfer surface area: 513.7 sq. ft. MAWP: 100 psi. Maximum temperature: 250 °F, Test Pressure 150 PSIG. Plate pack dimensions min/max: 28 in. and 72 in. Inlets: (2) 4-bolt, 2 in. dia. flange. Outlets: (2) 4-bolt, 2 in. dia. flange. Overall dimensions: 98 in. L x 23 in. W x 66 in. H.
|
|
Click here for more information (324.6 KB)
|
|
|
Click On Picture
|
1992 Paul Mueller Accu-Therm Plate Heat Exchanger
|
|
Mfg: Paul Mueller
|
Model: AT161B-10 S/S
|
|
Stock No: 75.JMB246.25
|
Serial No: 101176-1
|
|
1992 Paul Mueller Accu-Therm Plate Heat Exchanger. Model: AT161B-10 S/S, S/N: 101176-1. 316 Stainless steel plates: (104). Heat transfer surface area: Approx. 500 sq. ft. Design pressure: 75 psi. Design temperature: 200 °F. Typical max water flow: Approx. 650 gpm. Fixed end ports: (4) 3 in. Movable end ports: (4) 3 in. Overall dimensions: 72 in. L x 33-1/2 in. W x 84 in. H.
|
|
Click here for more information (520.4 KB)
|
|
|
Click On Picture
|
1994 Paul Mueller Accu-Therm Plate Heat Exchanger
|
|
Mfg: Paul Mueller
|
Model: AT16161FFB-10
|
|
Stock No: JMB245bb.30
|
Serial No: 101176-4
|
|
1994 Paul Mueller Accu-Therm Plate Heat Exchanger. Model: AT161FFB-10, S/N: 101176-4. 316L Stainless steel plates: (118). Heat transfer surface area: Approx. 589 sq. ft. Fixed end ports: (4) 3 in. Movable end ports: (4) 3 in. Design pressure: 75 psig. Design temperature: 150 °F. Test pressure: 98 psig. Typical max water flow: Approx. 650 gpm. Outlets: (8) 3 in. s-line. Refer to PDF for previous application information. Overall dimensions: 89 in. L x 35 in. W x 84 in. H.
|
|
Click here for more information (239.9 KB)
|
|
|
Click On Picture
|
1994 API Schmidt – Bretten Plate Heat Exchanger
|
|
Mfg: API Schmidt - Bretten
|
Model: SIGMA 27H-150
|
|
Stock No: CSWB363.25a
|
Serial No: 24394HX-02
|
|
1994 API Schmidt - Bretten Plate Heat Exchanger. Model: SIGMA 27H-150. S/N: 24394HX-02. Plate Material: Titanium. Number of Plates: 192. Gasket material: Nitrile. MAWP: 150 psig @ 285 °F. Test press: 225 psig. Approx. Number of sections: 2. Number of dividers: 1. Total heat transfer surface area: approx. 550 sq. ft. Inlets/outlets: (8) 2 ½ in. dia. S-line fittings. Overall dimensions: 6 ft. 4 in. L x 2 ft. 1 in. W x 4 ft. 6 in. H. (ACN487).
|
|
Click here for more information (275.5 KB)
|
|
|
Click On Picture
|
1994 APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: SR95
|
|
Stock No: DPPX41801.
|
Serial No: 28758-1
|
|
1994 APV Plate Heat Exchanger. Model: SR95. S/N: 28758-1. Nat’l Bd: 5948. Nominal flow capacity: 1650 gpm. Nominal heat transfer capacity: 14,202,787.5 Btu/hr. Number of plates: 292. Number of dividers: 1. Heat transfer surface area: approx. 3,171 sq. ft. MAWP: 150 psig @ 275 °F. MDMT: 20 °F @ 150 psig. Inlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Outlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Overall dimensions: 12 ft. 10 in. L x 2 ft. 9-1/2 in. W x 7 ft. 2 in. H.(ACN900).
|
|
Click here for more information (857.8 KB) Click here for Drawings (1,000.5 KB)
|
|
|
Click On Picture
|
1992 APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: SR950
|
|
Stock No: DPPX41802.
|
Serial No: 26337-2
|
|
1992 APV Plate Heat Exchanger. Model: SR950. S/N: 26337-2. Nat’l Bd: 4998. Nominal flow capacity: 1400 gpm. Nominal heat transfer capacity: 8,732,500 Btu/hr. Number of plates: 294. Number of dividers: 1. Heat transfer surface area: approx. 3, 075 sq. ft. MAWP: 150 psig @ 275 °F. MDMT: 20 °F @ 150 psig. Inlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Outlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Overall dimensions: 12 ft. 8-1/2 in. L x 2 ft. 9-1/2 in. W x 7 ft. H. (ACN900).
|
|
Click here for more information (203.5 KB) Click here for Drawings (1,113.8 KB)
|
|
|
Click On Picture
|
1992 APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: SR950
|
|
Stock No: DPPX41803.
|
Serial No: 26337-1
|
|
1992 APV Plate Heat Exchanger. Model: SR950. S/N: 26337-1. Nat’l Bd: 4997. Nominal flow capacity: 1400 gpm. Nominal heat transfer capacity: 8,732,500 Btu/hr. Number of plates: 290. Number of dividers: 1. Heat transfer surface area: approx. 3,034 sq. ft. MAWP: 150 psig @ 275 °F. MDMT: 20 °F @ 150 psig. Inlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Outlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Overall dimensions: 12 ft. 8-1/2 in. L x 2 ft. 9-1/2 in. W x 7 ft. H. (ACN900).
|
|
Click here for more information (224.0 KB) Click here for Drawings (1,216.8 KB)
|
|
|
Click On Picture
|
Chester Jensen Plate Heat Exchanger
|
|
Mfg: Chester Jensen/York
|
Model: HMC 63
|
|
Stock No: GOB1251.7
|
Serial No: 11722304
|
|
Chester Jensen Plate Heat Exchanger. Model: HMC 63. S/N: 11722304. Design pressure max: 100 psig. 316 Stainless steel plates: (170). Section 1: (108) plates; Section 2: (62) plates. Heat transfer surface area: 493 sq. ft. Fixed end ports: (4) 2-1/2 in. Movable end ports: (4) 2-1/2 in. Divider ports: (3) 2 in. Overall dimensions: 90 in. L x 25 in. W x 70 in. H. This unit came from Middlefield Cheese in Ohio. Running 7000 H/W of cheese milk 40 ° - 113 °F; 113° - 165 °F and 165 ° - 192 °F. (ACN459 with spindle assist), (ACN370w/o spindle assist).
|
|
Click here for more information (233.9 KB)
|
|
|
Click On Picture
|
APV Crepaco Model R405-S Plate Heat Exchanger - Titanium Plates
|
|
Mfg: APV Crepaco
|
Model: R405-S
|
|
Stock No: 35.184
|
Serial No: 18279
|
|
APV Crepaco Plate Heat Exchanger - Titanium Plates. Model: R405-S. S/N 18279. Number of stainless steel plates: 85. Plate dimensions: 3 ft. 8 in. H. x 1 ft. 5-1/2 in. W. Heat transfer area: approx. 478 sq. ft. Inlets: (2) 4 in. ID dia. product inlet, (2) 4 in. ID dia. steam inlet. Outlets: (2) 4 in. ID dia. product, (2) 4 in. ID dia. steam, all with 8 bolt flange connections. As titanium is resistant to salt and brackish water and corrosion that can be caused by many salt solutions as well as those including chlorides, bromides and iodides, the APV R405-S is ideal for most marine applications or where sea water is used as cooling water for long periods of time, thus reducing costs and improving investment returns. Overall dimensions: 5 ft. 1 in. L x 2 ft.10 in. W x 5 ft. 3 in. H.
|
|
Click here for more information (331.9 KB)
|
|
|
Click On Picture
|
Crepaco Plate Heat Exchanger
|
|
Mfg: Crepaco
|
Model: CR5
|
|
Stock No: RWDG280.11a
|
Serial No: C-7575
|
|
Crepaco Plate Heat Exchanger. Model: CR5. S/N: C-7575. (37) Stainless steel plates. Heating surface approx: 208.63 sq. ft. Plate pack: 9 in. L. Jayco Inc. pressure relief valve, model: TH 35, size: 2, capacity: 1660 lbs. Inlets/outlets: 4 in. 'S' line reducer to a 1-1/2 in. 'S' line. Water inlet: 2 in. with a 6 in. flange diameter and 4 attachment holes at a center to center distance of 3-1/2 in., 3-1/4 in. threaded female (steam), 4 in. 'S' line reducer to a 2 in. 'S' line. Overall dimensions: 73 in. L x 39 in. W x 84 in. H.
|
|
Click here for more information (558.2 KB)
|
|
|
Click On Picture
|
APV R57 Plate Heat Exchanger
|
|
Mfg: APV Crepaco
|
Model: R57
|
|
Stock No: SAF162a.8
|
Serial No: 25590
|
|
APV Plate Heat Exchanger. Model: R57, S/N: 25590. Stainless steel plates: (167). Section 1: (37) plates, Section 2: (113) plates, Section 3: (17) plates. Fixed end ports: (3) 4 in. Movable end ports: (3) 4-1/2 in. Divider 1 ports: (2) 2-1/2 in., (1) 3 in. Divider 2 ports: (1) 2 in., (1) 2-1/2 in. Overall dimensions: 90 in. L x 25 in. W x 70 in. H.
|
|
Click here for more information (266.0 KB)
|
|
|
Click On Picture
|
APV Paraflow Plate Heat Exchanger
|
|
Mfg: APV
|
Model: HMBM
|
|
Stock No: OI154.
|
Serial No: M/C 2533
|
|
APV Paraflow Plate Heat Exchanger. Model: HMBM, S/N: M/C 2533, Stainless steel plates: Qty (114), Heat transfer surface area: Approx. 312 sq. ft., Fixed end ports: (4) 2 1/2 in. Movable end ports: (4) 2 1/2 in. Divider 1 ports: (1) 2 in., (1) 1 1/2. Overall dimensions: 95 in. L x 28 in. W x 71 in. H.
|
|
Click here for more information (236.3 KB)
|
|
|
Click On Picture
|
1991 Mueller Accu-Therm Plate Heat Exchanger
|
|
Mfg: Paul Mueller Co.
|
Model: AT410 F-20
|
|
Stock No: SSLP101.9
|
Serial No: 101036-2
|
|
1991 Mueller Accu-Therm Plate Heat Exchanger. Model: AT40 F-20. S/N: 101036-2. Nat'l Bd: 18942. (96) 316 Stainless steel plates. Heating surface area: approx. 400 sq. ft. Plate pack max/min lengths: 16.89/16.32 in. MAWP: 100 psi @ 150 °F. MDMT: 32 °F @ 100 psi. Inlets: (1) 4 in. dia. port (hot), (1) 4 in. dia. port (cold). Outlets: (1) 4 in. dia. port (hot), (1) 4 in. dia. port (cold). The Accu-Therm is a compact heat exchanger consisting of embossed heat transfer plates with perimeter gaskets to contain pressure and control the flow of each medium. Accu-Therm plates ensure high thermal efficiency, uniform fluid distribution, minimal fouling, and suitability for full differential pressure rating. Single-pass arrangement over an F-frame. Overall dimensions: 54 in. L x 21 in. W x 82 in. H.
|
|
Click here for more information (154.1 KB)
|
|
|
Click On Picture
|
APV Paraflow HX Plate Heat Exchanger Model HX
|
|
Mfg: APV
|
Model: HX
|
|
Stock No: ENDX750.3a
|
Serial No: M/C 988
|
|
APV Paraflow Plate Heat Exchanger. Model HX, S/N M/C 988. Stainless steel plates: (52). Heat transfer surface area: Approx. 84 sq. ft. Design pressure: 100 psig. Test pressure: 150 psig. Fixed end ports: (4) 2 in. Movable end ports: (4) 2 in. Terminal ports: (3) 2 in. Overall dimensions: 66 in. L x 24 in. W x 60 in. H.
|
|
Click here for more information (240.1 KB)
|
|
|
Click On Picture
|
APV Paraflow Plate Heat Exchanger
|
|
Mfg: APV
|
Model: HX
|
|
Stock No: OI156.
|
Serial No: M/C 2569
|
|
APV Paraflow Plate Heat Exchanger. Model: HX, S/N: M/C 2569. Rated 3A sanitary. Design pressure: 100 psig. Test pressure: 150 psig. Fixed end ports: (4) 2 in. Movable end ports: (4) 2 in. Terminal 1 ports: (4) 2 in., Terminal 2 ports: (1) 2 in., Terminal 3 ports: (2) 2 in., Terminal 4 ports: (4) 2 in. Overall dimensions: 88 in. L x 24 in. W x 60 in. H.
|
|
Click here for more information (200.4 KB)
|
|
|
Click On Picture
|
APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: R-51
|
|
Stock No: 120.ME88.20
|
Serial No: 24447
|
|
APV Plate Heat Exchanger. Model: R51. S/N and W.O: 24447. Number of dividers: 2. Inlets/outlets: (11) 3 in. dia. S-line fittings. Overall dimensions: 8 ft. 9 in. L x 2 ft. 10 in. W x 7 ft. 10 in. H.
Parker Hydraulic Torque Link, S/N: 51758, inlets/outlets: (4) 1/2 in. dia. NPT fittings. Overall dimensions: 2 ft. 5 in. L x 1 ft. 9 in. W x 6 ft. 9 in. H.
|
|
Click here for more information (606.1 KB)
|
|
|
Click On Picture
|
APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model:
|
|
Stock No: CCFP510.
|
Serial No: 465
|
|
APV Plate Heat Exchanger. S/N 465. Plates: (29). Heat transfer surface area: Approx 52 sq. ft. Section 1: (15) plates; Section 2: (14) plates. Fixed end ports: (2) 2-1/2 in, (1) 2 in. Movable end ports: (1) 2 in, (1) 2-1/2 in. Divider ports: (3) 2 in. Overall dimensions: 93 in. L x 32 in. W x 50 in. H.
|
|
Click here for more information (265.0 KB)
|
|
|
Click On Picture
|
1998 FES Plate Heat Exchanger
|
|
Mfg: FES
|
Model: 8WP-B1-1
|
|
Stock No: BIIR7005.
|
Serial No: 34801
|
|
1998 FES Plate Heat Exchanger. Model: 8WP-B1-1. S/N: 34801. Nat'l Bd: 2296. Nominal tonnage rating: 220. Single pass unit with 27 double stainless steel plates, and (1) stainless steel plate at the movable side. Approx. 303 sq. ft. Hot side MAWP @ 185 °F: 150 psig. Cold side MAWP @ 185 °F: 250 psig. Hot side MDMT @ 150 psi: -20 °F. Cold side MDMT @ 250 psi: -20 °F. Inlets: (1) 8 in. dia. product cold side flange with (8) 3/4 in. dia. thru holes at a center-to-center distance of 4-1/2 in., (1) 8 in. dia. hot water flange with (8) 3/4 in. dia. thru holes at a center-to-center distance Heating surface area: 4-1/2 in. Outlets: (1) 8 in. dia. product hot side flange with (8) 3/4 in. dia. thru holes at a center-to-center distance of 4-1/2 in., (1) 8 in. dia. cold water flange with (8) 3/4 in. dia. thru holes at a center-to-center distance of 4-1/2 in. Overall dimensions: 5 ft. 2 in. L x 2 ft. 8 in. W x 7 ft. 8 in. H.(ACN211).
|
|
Click here for more information (222.7 KB)
|
|
|
Click On Picture
|
APV Paraflow Plate Heat Exchanger
|
|
Mfg: APV
|
Model: HX
|
|
Stock No: EPBD001.
|
Serial No: MC16131528
|
|
APV Paraflow Plate Heat Exchanger. Model: HX. S/N: MC16131528. Stainless steel construction. (54) Stainless Steel plates. Two pass system. Heat transfer-surface area: approx. 103.59 sq. ft. Product Inlet/outlet: 2 in. threaded (male), steam inlet/outlet: 2 in. threaded (male). Overall dimensions: 80 in. L x 21 in. W x 61 in. H.
|
|
Click here for more information (172.4 KB)
|
|
|
Click On Picture
|
2001 APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: SR6GL
|
|
Stock No: BIIR8010.
|
Serial No: 29441
|
|
2001 APV Plate Heat Exchanger. Model: SR6GL. S/N: 29441. Dwg: 4.29441.001 F. Number of stainless steel plates: 18. Heat transfer surface area: approx.106 sq. ft. MAWP: 250 psig at 250 °F. MDMT: 0 °F at 250 psig. Test pressure: 375 psig. Maximum/minimum plate pack dimensions: 12-1/2 in. and 12-1/4 in. Fixed end ports: (3) 4 in. dia. flanged ports. Movable end ports: (1) 4 in. flanged port. Overall dimensions: 3 ft. 11 in. L x 2 ft. 4 in. W x 6 ft. H.
|
|
Click here for more information (168.7 KB)
|
|
|
Click On Picture
|
APV Crepaco Plate Heat Exchanger
|
|
Mfg: APV Crepaco
|
Model:
|
|
Stock No: PFGL102.7
|
Serial No:
|
|
APV Crepaco Plate Heat Exchanger. Type: R51. W.O. 17187. Number of plates: 54. Heat transfer surface area: approx. 304 sq. ft. Inlets: (2) 2 in. dia. S-line fittings, (2) 3 in. dia. S-line fittings. Outlets: (4) 3 in. dia. S-line fittings. Overall dimensions: 6 ft. 10 in. L x 2 ft. 9 in. W x 7 ft. 11 in. H.
|
|
Click here for more information (119.3 KB)
|
|
|
Click On Picture
|
APV Paraflow Plate Heat Exchanger
|
|
Mfg: APV
|
Model:
|
|
Stock No: PFGL234.7a
|
Serial No: M/C 6511639
|
|
APV Paraflow Plate Heat Exchanger. Type: HMB. S/N: M/C 6511639. Number of plates: 37. Heat transfer surface area: approx. 113 sq. ft. Inlets/outlets: (8) 2-1/2 in. dia. ACME fittings. Overall dimensions: 7 ft. L x 2 ft. 3 in. W x 6 ft. H.
|
|
Click here for more information (111.6 KB)
|
|
|
Click On Picture
|
APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: SR35-S
|
|
Stock No: HDRG095.8a
|
Serial No: 14722
|
|
APV Plate Heat Exchanger. Model: SR35-S. S/N: 14722. (2) Dividers. (3) Sections. Number of plates: 40 (header), 57 (middle), 17 (floater). Total: 114. Heat Transfer Surface Area: approx. 498 sq. ft. Fixed end ports: (4) 3 in. dia. ACME fittings. Divider Inlets: (3) 3 in. dia. ACME fittings. Outlets: (3) 3 in. dia. ACME fittings, (1) 2 in. dia. ACME fitting. Terminal ports: (4) 3 in. dia. ACME fittings. Overall dimensions: 8 ft. L x 2 ft. 8 in. W x 6 ft. 4 in. H.
|
|
Click here for more information (147.5 KB)
|
|
|
Click On Picture
|
1995 Cetetherm Ceteplate Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: CT170-MP/18
|
|
Stock No: WJHM001.
|
Serial No: 30101-13889
|
|
1995 Cetetherm Ceteplate Plate Heat Exchanger. Model: CT170-MP/18. S/N: 30101-13889. Number of plates: 18. Heat transfer surface area: Approx: 50 sq.ft. MAWP: 145 psi @ 185 °F. Volume: 4-1/2 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
|
|
Click here for more information (167.2 KB)
|
|
|
Click On Picture
|
1995 Cetetherm Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: CT170-MP/18
|
|
Stock No: WJHM002.
|
Serial No: 30101-13888
|
|
1995 Cetetherm Plate Heat Exchanger. Model: CT170-MP/18. S/N: 30101-13888. Number of plates: 18. Heat transfer surface area: Approx: 50 sq. ft. MAWP: 145 psi @ 185 °F. Volume: 4-1/2 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
|
|
Click here for more information (148.3 KB)
|
|
|
Click On Picture
|
1995 Cetetherm Ceteplate Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: CT170-MP/18
|
|
Stock No: WJHM003.
|
Serial No: 30101-13887
|
|
1995 Cetetherm Ceteplate Plate Heat Exchanger. Model: CT170-MP/18. S/N: 30101-13887. Number of plates: 18. Heat transfer surface area: Approx: 50 sq.ft. MAWP: 145 psi @ 185 °F. Volume: 4-1/2 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
|
|
Click here for more information (164.1 KB)
|
|
|
Click On Picture
|
1995 Cetetherm Ceteplate Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: CT160-MP/38
|
|
Stock No: WJHM006.
|
Serial No: 30101-13883
|
|
1995 Cetetherm Ceteplate Plate Heat Exchanger. Model: CT160-MP/38. S/N: 30101-13883. Number of plates: 38. Heat transfer surface area: Approx: 105 sq.ft. MAWP: 145 psi @ 140 °F. Volume: 6 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
|
|
Click here for more information (161.1 KB)
|
|
|
Click On Picture
|
1995 Cetetherm Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: CT160-MP/38
|
|
Stock No: WJHM007.
|
Serial No: 30101-13881
|
|
1995 Cetetherm Plate Heat Exchanger. Model: CT160-MP/38. S/N: 30101-13881. Number of plates: 38. Heat transfer surface area: Approx: 105 sq. ft. MAWP: 145 psi @ 140°F. Volume: 6 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
|
|
Click here for more information (152.5 KB)
|
|
|
Click On Picture
|
1995 Cetetherm Ceteplate Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: CT230-MP8-34
|
|
Stock No: WJHM013.
|
Serial No: 30101-13903
|
|
1995 Cetetherm Ceteplate Plate Heat Exchanger. Model: CT230-MP8-34. S/N: 30101-13903. Number of plates: 34. Heat transfer surface area: Approx: 224 sq. ft. MAWP: 145 psi @ 230°F. Volume: 21 gallons. Inlets/outlets: (4) 5-1/2 in. dia. ports. Overall dimensions: 3 ft. L x 2 ft. W x 6 ft. 2 in. H.
|
|
Click here for more information (180.9 KB)
|
|
|
Click On Picture
|
1996 Cetetherm Ceteplate Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: M10-BFG
|
|
Stock No: WJHM014.
|
Serial No: 30101-40939
|
|
1996 Cetetherm Ceteplate Plate Heat Exchanger. Model: M10-BFG. S/N: 30101-40939. Number of plates: 277. Heat transfer surface area: Approx: 780 sq. ft. MAWP: 149 psi @ 275 °F. Volume: 48 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 6 ft. 1 in. L x 1 ft. 6-1/2 in. W x 3 ft. 2-1/2 in. H.
|
|
Click here for more information (219.1 KB)
|
|
|
Click On Picture
|
1996 Cetetherm Ceteplate Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: M10-BFG
|
|
Stock No: WJHM015.
|
Serial No: 30101-40938
|
|
1996 Cetetherm Ceteplate Plate Heat Exchanger. Model: M10-BFG. S/N: 30101-40938. Number of plates: 277. Heat transfer surface area: Approx: 780 sq. ft. MAWP: 149 psi @ 275 °F. Volume: 48 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 6 ft. 1 in. L x 1 ft. 6-1/2 in. W x 3 ft. 2-1/2 in. H.
|
|
Click here for more information (185.8 KB)
|
|
|
Click On Picture
|
1996 Cetetherm Ceteplate Plate Heat Exchanger
|
|
Mfg: Cetetherm
|
Model: M10-BFG
|
|
Stock No: WJHM016.
|
Serial No: 30101-40937
|
|
1996 Cetetherm Ceteplate Plate Heat Exchanger. Model: M10-BFG. S/N: 30101-40937. Number of plates: 277. Heat transfer surface area: Approx: 780 sq. ft. MAWP: 149 psi @ 275 °F. Volume: 48 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 6 ft. 1 in. L x 1 ft. 6-1/2 in. W x 3 ft. 2-1/2 in. H.
|
|
Click here for more information (193.7 KB)
|
|
|
Click On Picture
|
Stainless Steel Plate Heat Exchanger
|
|
Mfg: Not Specified
|
Model: UF-12H
|
|
Stock No: NOI8017.
|
Serial No: 66920-1
|
|
Stainless Steel Plate Heat Exchanger. Model: UF-12H. S/N: 66920-1. Number of stainless steel plates: 27. Heat transfer surface area: approx. 32 sq. ft. MAWP: 100 psig (cold). MAWP: 150 psig (hot) @ 150° F. Fixed end ports: (2) 2-1/2 in. dia. I-Line fittings, (2) 2-1/2 in. MNPT fittings. Overall dimensions: 2 ft. 11 in. L x 1 ft. 1 in. W x 3 ft. H.
|
|
Click here for more information (206.8 KB)
|
|
|
Click On Picture
|
APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: JR
|
|
Stock No: CFPH358B.
|
Serial No:
|
|
APV Plate Heat Exchanger. Equipment: Junior S/S. W.O. No. 26541-1. Number of plates: 37. Heat Transfer Surface Area: approx. 14 sq. ft. Inlets/outlets: (6) 1 in. S-line fittings. Overall dimension: 2 ft. 5 in. L x 7 in. W x 2 ft. 2 in. H.
|
|
Click here for more information (109.8 KB)
|
|
|
Click On Picture
|
SOLD APV Mix Cooling System
|
|
Mfg: Not Specified
|
Model: R51
|
|
Stock No: LWS-1.90
|
Serial No: 15277
|
|
APV mix cooling system with press, 1250 gph, Model R51, S/N 15277, complete with (1) divider, (62) plates, partlow recorder and stem valve.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD ITT Bell and Gossett Plate Heat Exchanger
|
|
Mfg: ITT Bell and Gossett
|
Model: GPX258B-079
|
|
Stock No: 35.JWIMS-7.0
|
Serial No: 97654320-01
|
|
ITT Bell and Gossett heat exchanger with National Bd # 55919, Model GPX258B-079 and S/N 97654320-01 with 2 in. outlets and 75 plates that are 15 in. x 34 in. SOLD
|
|
|
|
|
Click On Picture
|
SOLD APV Plate Heat Exchanger
|
|
Mfg: APV
|
Model: HX
|
|
Stock No: 35.HE470A
|
Serial No: mc57-841
|
|
APV plate heat exchanger, Model HX, S/N mc57-841, stock HE470A, size 2 frame with 11 total plates and 2 in.
clamp connection. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Alfa Laval Plate Heat Exchanger
|
|
Mfg: Alfa Laval
|
Model:
|
|
Stock No: 50.JMB34a.6
|
Serial No:
|
|
Alfa Laval Plate Heat Exchanger, 1990, Type P45-RCF, Manufacturing Number 30100-34665, Year 1990, Vol-329.2 Liters, 87 psi at 212 F, Working Temperature 100 C, 96 Plates 20 in. W x 56 in. L, 4 in. inlet-outlets, 34 in. W x 74 in. H x 79 in. L.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD ITT Bell and Gossett Plate Heat Exchanger
|
|
Mfg: ITT Bell and Gossett
|
Model: GPX
|
|
Stock No: 14.107
|
Serial No: 97054320-01
|
|
ITT Bell and Gossett Plate Heat Exchanger, Model GPX, 1997 year built, S/N 97054320-01, Part# 5-637-11-079-005, Max Diff Pressure 225 psi, Hot side : mawp 130 psi at 230 degrees F, Mdmt 32 degrees fat 150 psi, Cold side: mawp 150 psi at 230 degrees F, Mdmt 32 degrees fat 150 psi.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD DeLaval Plate Heat Exchanger
|
|
Mfg: DeLaval
|
Model:
|
|
Stock No: 192
|
Serial No:
|
|
DeLaval plate heat exchanger with 164 plates that are 16 in. x 45 in. and has 2 in. inlets and outlets.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD API Schmidt Bretten Heat Exchanger
|
|
Mfg: API Schmidt Bretten
|
Model: Sigma X29
|
|
Stock No: 75-SC-4841
|
Serial No: B-980069-303
|
|
API Schmidt Bretten heat exchanger, 1998, Model Sigma X29, S/N B-980069-303, part no. 4X29-GRN-057-001, 150 psi, 230 temp, 32 MDMT, plate heat exchanger. 108 plates that are around 17 x 35 in. which is approximately 456 square feet
SOLD
|
|
Click here for more information (104.3 KB)
|
|
| |