|
|
Click On Picture
|
Brown International Corporation Model 2503 Screw Finisher / Extractor
|
|
Mfg: Brown International Corporation
|
Model: 2503
|
|
Stock No: 120.JMB178.50
|
Serial No: 2505BA - 152
|
|
Brown International Corporation Screw Finisher / Extractor. Model: 2503. Cylindrical screen chamber: 12 in. dia x 39 in. L. (14) flights on screw. Inlet: 3 in. Liquid outlet: 3 in. Pomace outlet: 20 in. x 5 in. Toshiba motor: 15 Hp, 1165 Rpm, 230/460 V, 40/20 A, 60 Hz, 3 phase. Final speed: 438 rpm. Input capacity: up to 200 gpm. The model 2503 screw finisher / extractor is adapted to extracting, finishing, de-watering, and separating varieties of fruits and vegetables to desired specifications with minimum damage to the solid. Overall dimensions: 7ft. 2in. L x 2ft. 7in. W x 3ft. 8in. H.(ACN806).
|
|
Click here for more information (266.0 KB)
|
|
|
Click On Picture
|
FMC Juice Extractor/Finisher
|
|
Mfg: FMC Technologies (JBT FoodTech)
|
Model: 75 B.
|
|
Stock No: tPPMI201.
|
Serial No: CP-829
|
|
FMC Juice Extractor/Finisher. Model: 75B. S/N: CP-829. Capacity is between 75-100 gpm. Feed screw diameter: 14 in. New pneumatics. Screen size: 0.020 in. Construction: mild steel frame with stainless steel contact parts. Ideal for finishing fresh fruit products. These machines are sanitary, high-capacity, screw or worm-type machines designed to separate juice from pulp, seed and skins. Last used on Soya to extract the milk. Baldor Super-E Motor, 15 hp, 1765 rpm, 353 rpm (final), 230/460 V, 18.5 amps, 60 Hz, 3 phase. Inlets: 19-1/2 in. L x 7-1/2 in. W infeed. Outlet: 3 in. dia. Tri clamp. Overall dimensions: 90 in. L x 48 in. W x 50-1/2 in. H.
|
|
Click here for more information (584.0 KB)
|
|
|
Click On Picture
|
Jones Beloit Pressmaster Vertical Juice Press
|
|
Mfg: Jones Beloit
|
Model: 2510
|
|
Stock No: CCFP119.
|
Serial No: P-141
|
|
Jones Beloit Pressmaster Vertical Juice Press. Model 2510. S/N P-141. With a 304 stainless steel construction, this press has (1) 16 in. dia. top inlet with a 20 in. dia. flange and (12) attachment holes for raw product introduction. Product press 21 in. dia. x 47-1/2 in. H. 15-3/4 in. dia. slicing blades. Press consists of a 15 in. dia. inner screen with 1/4 in. through-holes and an outer screen with a diameter of 16 in. Juice accumulation trough: 33 in. dia. x 6 in. H. Juice exits through a 6-1/2 in. dia. PVC outlet. Pulp collects in a trough and is pushed out a 12 in. W x 3 in. H. Outlet by 6 in. W x 4 in. H. paddles. (2) Miller Power Fluid Actuators move spindle vertically. Delroyd motor drive, rebuilt in 1995 and overhauled in December 2000; drives a 9-3/4 in. dia. 3-belt pulley. Built as a 100 and converted to a 125, built for 7.5 hp motor with 100 s spindle. Rated from 1 to 12 rpm depending on the product. Welches get 20 tons per hour of concord grapes with press aid at 7 rpm. Pineapple peals 5 rpm and 10-12 ton per hour at 35% moisture removed giving you 65% dry matter. Overall Dimensions: 61 in. L x 44 in. W x 98 in. H
|
|
Click here for more information (1,234.3 KB)
|
|
|
Click On Picture
|
FMC 75-B Finisher
|
|
Mfg: FMC Technologies (JBT FoodTech)
|
Model: 75-B
|
|
Stock No: RAAF184.36
|
Serial No: AH-680
|
|
FMC Finisher. Model: 75-B. S/N: AH-680. Screw Auger: 13 in. dia. x 44 in. L with a 6 in. W pitch start and with a 2-1/2 in. W pitch end. Inlet: Infeed: 1 ft. 3-1/2 in. H. Inlet: 2 ft. 2 in. L x 9 in. W x 1 ft. 3-1/2 in. H. Hopper. Outlets: (1) 1 ft. 8 in. L x 7 in. W discharge port, (1) 3 in. diameter S-Line fitting. Overall dimensions: 8 ft. 9 in. L x 4 ft. W x 4 ft. 5 in. H. (ACN350).
|
|
Click here for more information (342.8 KB)
Click here for drawings and parts list (166.8 KB)
|
|
|
Click On Picture
|
Jones Beloit Pressmaster Vertical Juice Press Model P-125
|
|
Mfg: Jones Beloit
|
Model:
|
|
Stock No: CCFP135.
|
Serial No: P-143
|
|
Jones Beloit Pressmaster Vertical Juice Press. Equipment Model 2510 Model P-125. S/N P-143 We received from affiliate company out in Oregon in 1992. Weight about 7,100 lbs. One US vari drive 10 HP with press - Hopper inlet tank on top with fill probes. Press uses paddle waste discharge. New screens installed 2001. Screen doors rebuilt 2001. Press spindle rebuilt 2001. Built as a 125, rebuilt 1996, built for 10 hp motor.
|
|
Click here for more information (1,316.0 KB)
|
|
|
Click On Picture
|
FMC Technologies (JBT FoodTech) Stainless Steel Screw Finisher
|
|
Mfg: FMC Technologies (JBT FoodTech)
|
Model: UCF200A
|
|
Stock No: RCJF226.60
|
Serial No: H-017
|
|
FMC Technologies (JBT FoodTech) Stainless Steel Paddle Finisher. Model: UCF200A. U.S Electrical Motor: 25 hp, 1775 rpm, 230/460V, amps 30.2, 60 Hz, 3 phase. Pulley dia. driver 7-1/4 in. Driven 25-3/8 in. Screen Mesh: .002. This unit has capabilities for a full range of fruit and vegetable reduction, recovery of soluble solids (pulp wash), core wash eliminating pits from stoned fruit pulp, separates seeds, skins and extraneous particulate materials from pureed pulp. Inlet flange dia. 13-3/8 in. x 6-1/8 in. Qty. 10 mounting holes dia. 1/2 in. adjacent 4 in. opposite 14-3/4 in. ACME outputs: 4 in. Overall Dimensions: L. 5ft. 10-1/8 in. x W. 2ft. 5-7/8 in. x H. 4ft. 1/2 in.(ACN967a).
|
|
Click here for more information (723.3 KB)
|
|
|
Click On Picture
|
FMC Technologies (JBT FoodTech) Stainless steel Screw Finisher
|
|
Mfg: FMC Technologies (JBT FoodTech)
|
Model: UCF 200A
|
|
Stock No: RCJF230.60
|
Serial No: 86-7
|
|
FMC Technologies (JBT FoodTech) Stainless steel Screw Finisher. Model: UCF 200A. S/N: 86-7. Electric motor: 25 hp, 1760 rpm, 230/460V, 58/29 amps, 60 Hz, 3 phase. Pulley diameter: driver 7-1/4 in., driven 25-5/8 in. This unit has capabilities for a full range of fruit and vegetable reduction, including oil finishing (separating frit from the oil water emulsion), recovery of soluble solids (pulp wash), core wash eliminating pits from stoned fruit pulp, separates seeds, skins and extraneous particulate materials from pureed pulp. (1) Inlet flange dia. 13-1/2x6-1/8 in. 10 mounting holes 3/8 in. dia. Adjacent 4 in. Opposite: 14-7/8. (1) Acme output 4in. Overall Dimensions: L. 5ft. 9-1/2 in. x W. 2ft. 5-5/8 in. x H. 4ft. 1-1/8 in.(ACN967a).
|
|
Click here for more information (583.1 KB)
|
|
|
Click On Picture
|
FMC (JBT FoodTech) Stainless Steel Screw Finisher
|
|
Mfg: FMC Technologies (JBT FoodTech)
|
Model: UCF200A
|
|
Stock No: RCJF234.70
|
Serial No: 83-33
|
|
FMC (JBT FoodTech) Stainless Steel Screw Finisher. Model: UCF200A. Pulley dia. driver: 6 in., driven: 25-1/2 in. (1) Upper rectangular flange inlet: 13-1/2 in. L x 6 in. W. (10) mounting holes ½ in. dia., adjacent distance: 4-5/8 in., opposite distance: 14-7/8 in. (1) ACME outlet 4 in. General Electric motor: 25 hp, 1775 rpm, 230/460V, 57.4/28.7 amps, 60 Hz, 3 phase. Overall dimensions: 5 ft. 10-1/2 in. L x 2 ft. 5-3/4 in. W x 4 ft. 1-1/8 in. H.(ACN967a-85).
|
|
Click here for more information (465.1 KB)
|
|
|
Click On Picture
|
Brown International Corporation Model 2503 Screw Finisher / Extractor
|
|
Mfg: Brown International Corporation
|
Model: 2503
|
|
Stock No: RCJF355.40
|
Serial No: 2506-BADB-202
|
|
Brown International Corporation Screw Finisher/Extractor. Model: 2503. Pulley dia. driver: 7-1/4 in., driven: 20-1/2 in. Motor: Toshiba 15 hp, 1165 rpm, 230/460V, 40/20 amps, 60 Hz., 3 Phase. The Brown model 2503 screw finisher / extractor separates water from varieties of fruits and vegetables to desired specifications with only minimum degradation of solids. Advantages include: maximum activity at screen level to ensure high capacity input (200 gpm) and easily accessible interior for cleaning and screen changes. (2) 3 inch ACME inlets, (1) 2 in. ACME outlet, (1) Flange output dia. 4 in. 8 mounting holes dia. 3/8 adjacent 3-1/4 opp. 6in. Overall dimensions 7ft.1-1/4 in L. X 3ft.1 in. W X 5ft.1/2 in. H.(ACN830).
|
|
Click here for more information (211.6 KB)
|
|
|
Click On Picture
|
Brown International Corporation Model 2503 Screw Finisher / Extractor
|
|
Mfg: Brown
|
Model: 2503
|
|
Stock No: RCJF359.50
|
Serial No: 2506BA67
|
|
Brown International Corporation Screw Finisher / Extractor. Model: 2503. Pulley diameters driver: 5-3/4in., driven: 20-3/8 in. Motor: 10 hp, 1200 rpm, 230/460V, 27/13.5 amps, 60 Hz, 3 Phase. The Brown model 2503 screw finisher / extractor separates water from varieties of fruits and vegetables to desired specifications with only minimum degradation of solids. Advantages include: maximum activity at screen level to ensure high capacity input (200 gpm) and easily accessible interior for cleaning and screen changes. Flange input 11-3/4 in. X 6 in. (16) mounting holes 1/4 dia. adjacent 2-1/2 in. opposite. 13-1/8 in. Flange output 3-3/4 in. dia. (8) mounting holes 3/8 in. dia. adjacent 2-1/4 in. opposite: 6 in. Overall dimensions: L. 7 ft. 2 in. X W. 2 ft. 6-1/8 in. X H. 3ft. 11 in.(ACN830).
|
|
Click here for more information (621.9 KB)
|
|
|
Click On Picture
|
Brown International Corporation Model 2500 Screw Finisher / Extractor
|
|
Mfg: Brown International Corporation
|
Model: 2500
|
|
Stock No: RCJF360.70
|
Serial No: 2505 AARB-42
|
|
Brown International Corporation Screw Finisher / Extractor. Model: 2500. Pulley diameter driver 5-3/8 in. driven 20-3/8 in. Screen supporter .625 in., mesh .002 in. Electric motor: HP: 10, RPM 1200, Volts 230,460 Amps 27/13.5, Hz 60, 3 phase. The Brown model 2500 screw finisher / extractor separates water from varieties of fruits and vegetables to desired specifications with only minimum degradation of solids. Advantages include: maximum activity at screen level to ensure high capacity input (200 gpm) and easily accessible interior for cleaning and screen changes. (1) Output Flange 3-7/8 in. diameter. Qty. 8 mounting holes 3/8 in. dia. adjacent 2-3/8 in. opposite. 5-7/8 in. dia. (1) S-Line input 4in. Overall dimensions: L. 7 ft. 1/2 in. X W. 2 ft. 1-7/8 in. X H 4ft. 3-5/8 in.(ACN806).
|
|
Click here for more information (265.2 KB)
|
|
|
Click On Picture
|
FMC Technologies (JBT FoodTech) Stainless Steel Screw Finisher
|
|
Mfg: FMC Technologies (JBT FoodTech)
|
Model: UCF200A
|
|
Stock No: RCJF371.40
|
Serial No: 85-13
|
|
FMC Technologies (JBT FoodTech) Stainless Steel Screw Finisher. Model: UCF200A. Pulley diameter: driver 7-3/8 in., driven 25-1/2 in. This unit has capabilities for a full range of fruit and vegetable reduction to include: recovery of soluble solids (pulp wash), core wash, pit elimination from stoned fruit pulp, seed separation, and extraneous particulate material separation from pureed pulp. Inlet: (1) 4 in. Outlet: (1) 4 in. Overall Dimensions: L. 6 ft. 4-1/2 in. X W. 2 ft. 5-5/8 in. X H. 5 ft. 7-1/2 in.(ACN967a-85).
|
|
Click here for more information (499.1 KB)
|
|
|
Click On Picture
|
HE-6S Hydra Extractor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SPPP1007.a
|
Serial No:
|
|
HE-6S Hydra Extractor. Screw auger dimensions: 6 in. x 28 in. L. Screen dimensions: 6-1/4 in. dia. x 28 in. L. Screen size: 1/8 in. Sump tank capacity: 15 gal. Baldor Industrial Motor, 3 hp, 1725 rpm, 208-230/460 V, 9.0-8.6/4.3 amps, 60 Hz, 3 phase. Morse Gear Reducer, 20 ratio, 86.25 rpm (final). Inlets: (1) 1-1/2 in. dia. FNPT, (1) 4 in. dia. port with a 6-1/2 in. dia. flange and (8) 3/8 in. thru-holes at center distances of 2-3/4 in. Outlets: (1) 1-1/2 in. dia. port, (1) 2-1/2 in. dia. port. Overall dimensions: 57 in. L x 30 in. W x 13 in. H. (ACN300)
|
|
Click here for more information (223.3 KB)
|
|
|
Click On Picture
|
SOLD Brown 303 Finisher Stainless Steel
|
|
Mfg: Brown
|
Model: 303
|
|
Stock No: 150.F1001
|
Serial No:
|
|
Brown double length screw finisher, Model 303, all stainless steel contact and frame construction, rectangular feed port with a 3 in. pipe inlet, catch pan with a 6 in. bottom discharge, pneumatic pumice cone with controls, bottom mounted 20 horsepower 230/460 volt 60 hz 3-phase belt drive, complete with all covers.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Azo Solid/Liquid Screener
|
|
Mfg: AZO
|
Model: FLF-650
|
|
Stock No: NPPC2202.a
|
Serial No: 12082
|
|
Azo Solid/Liquid Screener. Model FLF-650. S/N 12082. Stainless steel. Inlets/outlets: (2) 2 in. Q-line, (1) 4 in. Product Chamber: 13-1/2 in. dia x 32 in. L. Rectangular exit aperture: 5 in. x 6 in. Hinged lid aperture: 5 1/2 in. x 18 in. Simple dismantling with quick release clamps. SEW Varidrive motor: 2 hp, 1720 rpm, 230/460 V, 6/3 amps, 60 Hz, 3 phase. SEW reducer: ratio: 2.48, torque: 119 lb in., input speed: 460 - 2290 rpm, output speed: 185-928 rpm. Overall dimensions: 82 in. L x 30 in. W x 52 in. H. This screener is designed for continuous separation of solids from liquids. Examples include: Fruit pulp from fruit juice, butter from buttermilk, cheese fines from whey.
SOLD
|
|
Click here for more information (283.6 KB)
|
|
|
Click On Picture
|
SOLD Vincent Screw Press/Finisher
|
|
Mfg: Vincent Corporation
|
Model: CP-10-K36
|
|
Stock No: END81599.10
|
Serial No: 94211
|
|
Vincent Screw Press/Finisher. Model CP-10-K36. S/N 94211. Inlet: 12 in. L x 9-½ in. W. Outlet: 3-½ in. dia. Gearbox: Sumitomo, Model GHYJ S E 3170 T. Ratio 106, Input 14.9 hp, 1,750 rpm, Output Torque: 52200 in. lbs. S/N A557132. (2) Parker Pneumatic Pistons. Model PLUNS16, bore: 4.00, stroke 5. Motor 10 hp, 1,160 rpm, 230/460 V, final rpm of 11. Overall dimensions: 101-½ in. L x 26-½ in. W x 40-½ in. H.
SOLD
|
|
Click here for more information (265.0 KB)
|
|
|
Click On Picture
|
SOLD Brown 303 Double Screw Finisher Stainless Steel
|
|
Mfg: Brown
|
Model: 303
|
|
Stock No: 1R-256.50
|
Serial No: 304-10
|
|
Brown International Corp. Stainless Steel Double Screw Pulper/Finisher, Model: 303, S/N: 304-10. Approximately 250 gpm. Cylindrical screen chamber: 12 in. dia x 78 in. L. Two section of screening: 1st section Tyler mesh size: 8, 2nd section Tyler mesh size: 16. (11) flights on screw. Product intake: 8 in. L x 4 in. W. Liquid outlet: 4 in. dia per pan. Pomace outlet: 20 in. L x 5 in. H. Allis Chalmer motor: 30 hp, 230/460 V, 70/35 amps, 60 Hz, 3 phase. Final speed: 525 rpm. Overall dimensions: 113 in. L x 26 in. W x 48 in. H.
SOLD
|
|
Click here for more information (400.6 KB)
|
|
|
Click On Picture
|
SOLD Brown International Corp. 2503 Screw Finisher/Extractor
|
|
Mfg: Brown International Corp.
|
Model: 2503
|
|
Stock No: 155.JMB195a.40
|
Serial No: 2506BA-127
|
|
Brown International Corp. 2503 Screw Finisher/Extractor. Model: 2503, S/N: 2505BA-127. Stainless steel. Cylindrical screen chamber: 12 in. dia x 39 in. L. (14) flights on screw. Mesh size: 20. Product intake: hopper narrows from 13 in. x 12 in. opening to a 6 in. x 12 in. feed inlet. Liquid outlet: 2 in. Pomace outlet: 20 in. x 5-1/2 in. Motor: 10 hp. Final speed: 380 rpm. Input capacity: up to 200 gpm. The Brown Model 2503 Screw Finisher/Extractor is readily adapted to extracting, finishing, de-watering, and separating citrus products as well as other materials such as apricots, tomatoes, pears, apples, plums, grapes, and pineapple. Overall dimensions: 87 in. L x 30 in. W x 63 in. H. SOLD
|
|
Click here for more information (273.0 KB)
|
|
|
Click On Picture
|
SOLD Brown Finisher Stainless Steel Model 2503
|
|
Mfg: Brown International Corp.
|
Model: 2503
|
|
Stock No: 250.1R254.80
|
Serial No: 2506-40
|
|
Brown International Corp. Stainless Steel Finisher. Model 2503. S/N 2506-40. Inside Dimensions 20 in. W x 40 in. L x 30 in. H. Finisher Screw is 12 in. Diameter x 40 in. L. 3 in. raw product inlet (can be modified to other sizes) and 4 in. finished product outlet. Motor. Mfg: n/a. Motor Specifications: 20 hp, 230/460 Volt, 60 Hz. Overall Dimensions: 27 in. W x 84 in. L x 48 in. H. Unit has been completely refurbished and is in excellent working condition. SOLD
|
|
Click here for more information (265.6 KB)
|
|
|
Click On Picture
|
SOLD Azo Solid/Liquid Screener- Parts
|
|
Mfg: AZO
|
Model: FLF-650
|
|
Stock No: NPPC2203.
|
Serial No:
|
|
Azo Solid/Liquid Screener- Parts. Model: FLF-650. Stainless steel. Inlets/outlets: (2) 2 in. Q-line, (1) 4 in. Product Chamber: 13 1/2 in. dia x 32 in. L. Rectangular exit aperture: 5 in. x 6 in. Hinged lid aperture: 5-1/2 in. x 18 in. Simple dismantling with quick release clamps. SEW Varidrive motor: 2 hp, 230/460 V, 6/3 amps, 60 Hz, 3 phase. SEW reducer: ratio: 2.48, output speed: 138-693 rpm. Overall dimensions: 46 in. L x 25 in. W x 52 in. H. SOLD
|
|
Click here for more information (317.5 KB)
Click here for Additional Information (481.6 KB)
|
|
|
Click On Picture
|
SOLD Giuseppe Garolla Stainless Super Screw Dewatering Press
|
|
Mfg: Giuseppe Garolla
|
Model:
|
|
Stock No: CSWB134.25a
|
Serial No:
|
|
Giuseppe Garolla Stainless Super Screw Dewatering Press. Auger dimensions: 19 in. dia x 40-1/2 in. L. Pitch: 9 in. Motor, 20 hp, 1150 rpm, 220/440 V, 53/26.5 amps, 60 Hz, 3 phase. Inlet: (1) 43-1/2 in. L x 22 in. H. (top infeed). Outlets: (2) 2 in. dia. S-line fittings (water), 20 in. L x 18 in. H. lid (product discharge). Overall dimensions: 12 ft. 9 in. L x 3 ft. W x 5 ft. 4 in. H. SOLD
|
|
Click here for more information (310.0 KB)
|
|
|
Click On Picture
|
SOLD Brown International Corporation Model 2503 Screw Finisher / Extractor
|
|
Mfg: Brown International Corporation
|
Model: 2503
|
|
Stock No: RCJF305.80
|
Serial No: 2506-55
|
|
Brown International Corporation Screw Finisher / Extractor. Model: 2503. Pulley dia. driver 5-7/8 in., driven 20-1/4 in. Motor: Toshiba. 15 hp, 1165 rpm, 230/460V, 40/20 amps, 60 Hz, 3 phase. The model 2503 screw finisher / extractor separates water from varieties of fruits and vegetables to desired specifications with only minimum degradation of solids. Advantages include: maximum activity at screen level to ensure high capacity input (200 gpm) and easily accessible interior for cleaning and screen changes. (1) Flange inlet 12 in. X 6 in. Qty: 16 mounting holes ¼ in. dia. adjacent 2-1/2 in. opposite. 13-1/8 in. (1) S-Line Outlet 4 in. Overall Dimensions: 7 ft. 1-1/4 in. L. X 2 ft. 6 in. W. X 3 ft. 10-3/4 in H. (ACN806). SOLD
|
|
Click here for more information (364.1 KB)
|
|
|
Click On Picture
|
SOLD Brown International Corporation Model 2503 Screw Finisher / Extractor
|
|
Mfg: Brown International Corporation
|
Model: 2503
|
|
Stock No: RCJF306.80
|
Serial No: 2506-BA-03
|
|
Brown International Corporation Screw Finisher / Extractor. Model: 2503. Pulley dia: driver 5-3/4 in., driven 20-3/8 in. Motor: Siemens, 15 hp, 1170 rpm, 230/460V, 37.4/18.7 amps, 60 Hz, 3 phase. The Brown model 2503 screw finisher / extractor separates water from varieties of fruits and vegetables to desired specifications with only minimum degradation of solids. Advantages include: maximum activity at screen level to ensure high capacity input (200 gpm) and easily accessible interior for cleaning and screen changes. (1) Input Flange Dia. 11-7/8 in. X 6 in. Qty: 16 mounting holes ¼ dia., adjacent: 2-1/2 in., opposite. 13-1/8 in. (1) ACME output 4 in. Overall Dimensions: 7 ft. 1 in. L. X 2 ft. 5-5/8 in. W. X 3 ft. 10-7/8 in H.(ACN806). SOLD
|
|
Click here for more information (366.6 KB)
|
|
|
Click On Picture
|
SOLD Brown International Corporation Model 2503 Screw Finisher / Extractor
|
|
Mfg: Brown International Corporation
|
Model: 2503
|
|
Stock No: RCJF358.60
|
Serial No: 2506BA66
|
|
Brown International Corporation Screw Finisher / Extractor. Model: 2503. Pulley dia. driver 5-3/4 in., driven 20-3/8 in. Electric motor:10 hp, 1200 rpm , 230/460V, 27/13.5 amps, 60 Hz, 3 phase. The Brown model 2503 screw finisher / extractor separates water from varieties of fruits and vegetables to desired specifications with only minimum degradation of solids. Advantages include: maximum activity at screen level to ensure high capacity input (200 gpm) and easily accessible interior for cleaning and screen changes (1) ACME input 3 in. (1) ACME output 4 in. Overall Dimensions: 7 ft. 1-1/4 in. L X 2 ft. 6-1/8 in. W. X 4 ft. 9-3/8 H.(ACN806). SOLD
|
|
Click here for more information (781.6 KB)
|
|
|
Click On Picture
|
SOLD Brown International Corporation Model 3900 Screw Finisher / Extractor
|
|
Mfg: Brown International Corporation
|
Model: 3900
|
|
Stock No: RCJF366.40
|
Serial No: 3902-16
|
|
Brown International Corporation Screw Finisher / Extractor. Model: 3900. Pulleys: 5 in. driver and 19 in. driven. Driven 18-3/4 in. Screen supporter .628 mesh screen, .020 in. Inlet: 8 ¼ in x 4 in flange. Motor: Toshiba: 7.5 hp, 1175 rpm, 230/460 V, 19.8/9.9 amps, 60 Hz, 3 phase. The model 3900 screw finisher / extractor separates water from varieties of fruits and vegetables to desired specifications with only minimum degradation of solids. Advantages include: maximum activity at screen level to ensure high capacity input (50 gpm) and easily accessible interior for cleaning and screen changes. Input flange dia. 8-1/4 x 4 Qty. (10) mounting holes 1/4 dia. adjacent 2-5/8 in. opposite 9-1/8 in. ACME output 3 in. Overall dimensions: L. 5ft. 8-1/4 in. x W 1ft. 10-3/4 in. x H 3 ft. 5 in.(ACN538). SOLD
|
|
Click here for more information (132.7 KB)
|
|
|
Click On Picture
|
SOLD FMC Technologies (JBT FoodTech)Stainless Steel Screw Finisher
|
|
Mfg: FMC Technologies (JBT FoodTech)
|
Model: UCF200A
|
|
Stock No: RCJF160.80
|
Serial No: 86-5
|
|
FMC Technologies (JBT FoodTech) Stainless Steel Screw Finisher. Model: UCF200A. Reliance electric motor: 25 hp, 1765 rpm, 230/460V, 60 Hz, 3 phase. Pulley dia. driver: 7-1/4 in. driven: 25-1/4 in. This unit has capabilities for a full range of fruit and vegetable reduction, recovery of soluble solids (pulp wash), core wash eliminating pits from stoned fruit pulp, separates seeds, skins and extraneous particulate materials from pureed pulp. (1) Input flange dia. 3-7/8 in. 8 mounting holes ¾ in. dia. Adjacent: 2-7/8 in. opposite: 7-1/2 in. (1) S-line output: 2-1/2 in. (2) Acme outputs: 4 in. Overall dimensions: L. 5 ft. 9-5/8 in. x W. 2 ft. 7-1/8 in. x H. 4 ft. 3-1/8 in.(ACN967a). SOLD
|
|
Click here for more information (515.9 KB)
|
|
|
Click On Picture
|
SOLD FMC Technologies (JBT FoodTech) Stainless Steel Screw Finisher
|
|
Mfg: FMC Technologies (JBT FoodTech)
|
Model: UCF200A
|
|
Stock No: RCJF682.35
|
Serial No: 8332
|
|
FMC Technologies (JBT FoodTech) Stainless Steel Screw Finisher. S/N: 8332. Capacity range: 20 to 60 tons per hour. Pulley dia. driver 7-1/4 in. driven 25-5/8 in. This unit has capabilities for a full range of fruit and vegetable reduction, including oil finishing (separating frit from the oil water emulsion), recovery of soluble solids (pulp wash), core wash eliminating pits from stoned fruit pulp, separates seeds, skins and extraneous particulate materials from pureed pulp. Alternative uses include mixing and blending ingredients during the finishing process. Speed of drive shaft: 780 rpm. All components are made of stainless steel or other corrosion resistant materials. Drive motor: 30 hp. (1) S-Line inlet: 4 in. (2) Acme outlets 4 in. Overall dimensions: L. 5ft. 10-1/4 in. X W.2ft. 7-1/2 in. X H. 4ft. 2-5/8 in.(ACN967A-83). SOLD
|
|
Click here for more information (441.2 KB)
|
|
|
|
|
