|
|
Click On Picture
|
Waukesha Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: RBFM608.
|
Serial No:
|
|
Waukesha Positive Displacement Pump. Model: 60. Baldor Washdown Motor, 5 hp, 1750 rpm, 208-230/460 V, 15.4-14.2/7.1 amps, 60 Hz, 3 phase. SM-Cyclo Drive, ratio: 6, rpm out: 291 (final), torque: 1400 lb-in. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 4 ft. L x 1 ft. 3 in. W x 1 ft. 5 in. H.
|
|
Click here for more information (465.5 KB)
|
|
|
Click On Picture
|
1999 Waukesha Cherry Burrell Positive Displacement Pump Model 60 U1
|
|
Mfg: Waukesha Cherry-Burell
|
Model: 60 U1
|
|
Stock No: 42a.ME138a.5
|
Serial No: 24263599
|
|
1999 Waukesha Cherry Burrell Positive Displacement Pump. Model: 60 U1. S/N: 24263599. 316 stainless steel construction, 3-A sanitary rated. Pumping capacity: 60 gpm. Nominal pumping capacity: 90 gpm. Displacement per revolution: 0.153 gallons. Maximum speed: 600 rpm. Seal option: single o-ring buna elastomers. Standard alloy rotors. Baldor Industrial Motor, 3 hp, 1750 rpm, 230/460 V, 8.2/4.1 amps, 60 Hz, 3 phase. ISR Gear Drive, 4.43 ratio, 395 rpm (final). Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Typical product applications: (confectionery) syrups, cream fillings, chocolate, (pharmaceutical/health care) pill pastes, emulsions, slurries (dairy), cottage cheese and yogurt. Overall dimensions: 3 ft. 2 in. L x 1 ft. 4 in. W x 1 ft. 6 in. H. (ACN70).
|
|
Click here for more information (280.8 KB)
Click here for Pump Curve (92.6 KB)
|
|
|
Click On Picture
|
Waukesha 55 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 55
|
|
Stock No: BBCF688B.
|
Serial No: DO65537
|
|
Waukesha Positive Displacement Pump. Model: 55. S/N: DO65537. Seal option: O-ring. Motor, 2 hp, 1800 rpm, 230/460 V, 5.8/2.9 amps, 60 Hz, 3 phase. Drive, ratio: 6.2, Rpm out: 290 (final). Inlets/outlets: (2) 2 in. dia. ACME fittings. Overall dimensions: 3 ft. 3 in. L x 1 ft. 4 in. W x 2 ft. H.
|
|
Click here for more information (295.9 KB)
|
|
|
Click On Picture
|
Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: RBFM607.7
|
Serial No:
|
|
Waukesha 60 Positive Displacement Pump. Model: 60. Flow rate for new pump is 70 gpm with required horsepower and pressure at 50 psi. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Baldor Electric Motor, 5 hp, 1750 rpm, 208-230/460 V, 13.8-13.4/8.7 amps, 60 Hz, 3 phase. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 4 ft. 8 in. L x 1 ft. 6 in. W x 1 ft. 8 in. H.(ACN70).
|
|
Click here for pump curve (92.6 KB)
Click here for more information (190.1 KB)
|
|
|
Click On Picture
|
Waukesha Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model:
|
|
Stock No: RBFM622.6
|
Serial No:
|
|
Waukesha Positive Displacement Pump. Single Lobe Rotors. Baldor Washdown Motor, 5 hp, 1750 rpm, 208-230/460 V, 15.4-14.2/7.1 amps, 60 Hz, 3 phase. Inlets: (1) 2-1/2 in. dia. S-line fittings. Outlets: (1) 3-3/4 in. x 3-3/4 in. rectangular port. Overall dimensions: 4 ft. 4 in. L x 1 ft. 7 in. W x 2 ft. 6 in. H.
|
|
Click here for more information (195.8 KB)
|
|
|
Click On Picture
|
2002 Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: DWKN209.20
|
Serial No: 314549 02
|
|
2002 Waukesha 60 Positive Displacement Pump. Model: 60. S/N: 314549 02. Flow rate for new pump is 70 gpm with required horsepower and pressure at 50 psi. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Pump is mounted on a stainless steel base, coupled to a 10 hp TEFC 230/460V motor and a 5-1 ratio in-line gearbox. Rpm at pump: 350. Standard port size: 2-1/2 in.
|
|
Click here for pump curve (119.1 KB)
|
|
|
Click On Picture
|
1995 Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: DWKN212.15
|
Serial No: 17219195
|
|
1995 Waukesha 60 Positive Displacement Pump. Model: 60. S/N: 17219195. Flow rate for new pump is 70 gpm with required horsepower and pressure at 50 psi. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Pump is mounted on an elevated stainless steel base, coupled to a 1 hp, TEFC 230/460V motor and a 31.4-1 ratio in-line gearbox. Rpm at pump: 55 rpm. A stainless still cover for the pump and motor is included.
|
|
Click here for more information (86.4 KB)
Click here for pump curve (119.1 KB)
|
|
|
Click On Picture
|
1996 Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: DWKN211.10
|
Serial No: 134520
|
|
1996 Waukesha 60 Positive Displacement Pump. Model: 60. Serial: 134520. Flow rate for new pump is 70 gpm with required horsepower and pressure at 50 psi. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Standard port size: 2-1/2 in.
|
|
Click here for more information (92.6 KB)
|
|
|
Click On Picture
|
1996 Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: DWKN210.5
|
Serial No: 188159 96
|
|
1996 Waukesha 60 Positive Displacement Pump. Model: 60. Serial: 188159 96. Flow rate for new pump is 70 gpm with required horsepower and pressure at 50 psi. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Standard port size: 2-1/2 in.
|
|
Click here for pump curve (92.6 KB)
|
|
|
Click On Picture
|
Waukesha 55 Gearbox
|
|
Mfg: Waukesha
|
Model:
|
|
Stock No: DBP140
|
Serial No: DO73794SS
|
|
Waukesha 55 Gearbox. S/N: DO73794SS.
|
|
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Pump
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 42a.ME137a.5
|
Serial No:
|
|
Waukesha Positive Pump, Size 60, 3 in inlet, 3in outlet, 21 in H x 16 in W x 40 in L. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: SACH069.13
|
Serial No: 192043-96
|
|
Waukesha Model 60 Positive Displacement Pump on stainless steel base. S/N 192043-96. Inlet/Outlet (2) 2-1/2 in., Sterling Motor, Model JH0034PCA, 3 hp, 230/460 volt, 7.8/3.9 amps, 60 Hz, 3 phase, 1,745 rpm. Gearbox ratio 7:1, final rpm is 242.
SOLD
|
|
Click here for more information (269.2 KB)
|
|
|
Click On Picture
|
SOLD Waukesha Positive Pump 60
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: NPPC203.
|
Serial No: 276558-00
|
|
Waukesha Positive Pump. Model 060, S/N 276558-00, Inlet/Outlet 2 in. Reliance Electric AC Motor, ID P18A6208M, KC, Frame WI184TC, Type P, 3 phase, 5.0 hp, 1,725 rpm, 208-230/460 volt, 15-13.8/6.9 amps, 60 Hz, 1.15 SF, Time Rating Cont, 40 deg amb.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha Cherry-Burell
|
Model: 60
|
|
Stock No: SNBB053.14a
|
Serial No: 177638 96
|
|
Waukesha Cherry Burrell Model 60 Positive Displacement Pump. S/N: 177638 96. Pump features double mechanical seals with water-flush. Inlets/outlets: (2) 2-1/2 in. dia. Q-line fittings. Overall dimensions: 19 in. L x 11 in. W x 16 in. H.
SOLD
|
|
Click here for more information (494.9 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: BIIR12.
|
Serial No: 102847
|
|
Waukesha 60 Positive Displacement Pump. S/N: 102847. O-ring seals. Sew Eurodrive Motor: 5 hp, 1,680 rpm, 230/460 V, 13.6/6.8 amps, 60 Hz. Sew Eurodrive Motor Drive: 13.27:1 ratio, 1,700 rpm (input), 120 rpm (output), 1480 lb-in. torque output. Inlets/outlets: (2) 2-1/2 in. dia. Q-line fittings. Overall dimensions: 43 in. L x 16 in. W x 24-1/2 in. H.
SOLD
|
|
Click here for more information (504.4 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 55 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 55
|
|
Stock No: ATE013.
|
Serial No: DO28496 SS
|
|
Waukesha 55 Positive Displacement Pump. S/N: DO28496 SS. O-ring seals. Displacement per revolution: 0.15. Nominal capacity: 90 gpm. 600 rpm (max). Inlets/outlets: (2) 2 in. dia. threaded fittings. Overall dimensions: 16-1/2 in. L x 6-1/2 in. W x 14 in. H.
SOLD
|
|
Click here for more information (532.7 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: OIP071.
|
Serial No: 117760
|
|
Waukesha 60 Positive Displacement Pump. S/N: 117760. 3-A Sanitary rated. Displacement per revolution: 0.153 gal. Nominal capacity: 90 gpm. Maximum rpm: 600. Single o-ring. Features: bi-directional flow, upper shaft position, easy interchangeable installation or conversion. Manual relief cover. By-pass pressure is regulated by a threaded adjustment screw. Typical product applications: (canning) puddings, jams, jellies, (cosmetics) face creams and lotions, dyes and alcohols, shampoos, (dairy) cheese curd and whey, cottage cheese, yogurt. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 22-1/2 in. L x 10-1/2 in. W x 15 in. H.
SOLD
|
|
Click here for more information (206.5 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 55 Positive Pump Stainless Steel SOLD
|
|
Mfg: Waukesha
|
Model: 55
|
|
Stock No: 32a.MP-109
|
Serial No: DO 800
|
|
Waukesha Positive Pump. Size 55 DO 800, S/N 52-025-230-215. Stainless steel. U.S. Motor, S/N P43282218, 3 hp, variable speed, 220/440 V. Threaded ports: 2 in.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Waukesha 55 Positive Pump Stainless Steel SOLD
|
|
Mfg: Waukesha
|
Model: 55
|
|
Stock No: MP-107
|
Serial No: D075893 SS
|
|
Waukesha positive pump stainless steel, size 55. S/N D075893 SS. 2 in. threaded ports with 4 hp motor, fixed speed drive, make U.S. Motors, 1,165 rpm, mounted on a stainless steel base.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Pump Stainless Steel
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: 10-RB-211
|
Serial No: 198643 97
|
|
Waukesha Positive Displacement Pump. Model: 60. S/N 198643 97. A-3 Sanitary rated. Displacement per revolution: 0.153 gal. Nominal capacity: 90 gpm. Maximum rpm: 600. Single o-ring. Features: bi-directional flow, 3-way mounting, upper shaft position, easy interchangeable installation or conversion. Manual relief cover. By-pass pressure is regulated by a threaded adjustment screw. Typical product applications: (canning) puddings, jams, jellies, (cosmetics) face creams and lotions, dyes and alcohols, shampoos, (dairy) cheese curd and whey, cottage cheese, yogurt. Inlet/outlet: 2-1/2 in. dia. NPT (male). Overall dimensions: 21 in. L x 12 in. W x 16 in. H. SOLD
|
|
Click here for more information (214.9 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: RPMI04.
|
Serial No: 91207SS
|
|
Waukesha Positive Displacement Pump. Model: 60. S/N 91207 SS. A-3 Sanitary rated. Displacement per revolution: 0.153 gal. Nominal capacity: 90 gpm. Maximum rpm: 600. Single o-ring seal. Features: bi-directional flow, 3-way mounting, lower shaft position, and easy, interchangeable installation or conversion. Typical product application: (bakery) sweeteners, fat and oils, fruit fillings(beverage) syrups, cream fillings, chocolate, (dairy) cream, milk, butter. Inlet/outlets: 2-1/2 in. dia. S-Line. Overall dimensions: 21 in. L x 12 in. W x 16 in. H. SOLD
|
|
Click here for more information (210.2 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: RBPM005.
|
Serial No: 9482 SS
|
|
Waukesha 60 Positive Displacement Pump. Model: 60. S/N: 9482 SS. 316 Stainless steel construction. Pumping capacity: 50 gpm. Nominal capacity: 90 GPM. Displacement per revolution: 0.153 gallons. Maximum speed: 600 rpm. 3A and BISCC approved pumps, Easy disassembly for easy cleaning and flexible three-way mounting. Vented cover. US Unimount Motor, 5hp, 1740 rpm, 60 Hz, 3 phase. Nord Gear Drive, 328 final rpm. Inlets/oultets: (2) 2-1/2 in. dia. ACME threaded fittings. Overall dimensions: 50 in. L x 15 in. W x 19 in. H. SOLD
|
|
Click here for more information (284.3 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Pump Stainless Steel
|
|
Mfg: Waukesha
|
Model: sz60
|
|
Stock No: LOL152.8
|
Serial No: 5016ss
|
|
Waukesha positive pump size 60, S/N 5016SS with a Baldor 10 hp motor, 3 ph, 1,725 rpm, 208-230-/460 volts. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: RPMI07.
|
Serial No: 168820-97
|
|
Waukesha Positive Displacement Pump. Model: 60. S/N 168820-97. A-3 Sanitary rated. Displacement per revolution: 0.153 gal. Nominal capacity: 90 gpm. Maximum rpm: 600. Single o-ring seal. Features: bi-directional flow, 3-way mounting, upper shaft position, easy, interchangeable installation or conversion. Typical product application: (bakery) sweeteners, fats and oils, frostings, (beverage) juice, soft drinks, high fructose corn syrups, (meat packing) pet foods, ruffle and caul fat, meat-emulsions. Inlet/outlet: 2-1/2 in. dia. S-Line. Overall dimensions: 19 in. L x 12 in. W x 16 in. H. SOLD
|
|
Click here for more information (205.1 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: PPCC003.
|
Serial No: 93760
|
|
Waukesha 60 Positive Displacement Pump. S/N: 93760. Stainless steel. Displacement per revolution: 0.153 gallons. Nominal capacity: 35 gpm. Reliance Electric Motor, 3 hp, 1750 rpm. Dodge APG Motor Drive, 7.6 ratio, 230 rpm (final), output torque: 2630 in-lbs. Typical product applications: (beverage) fruit concentrates, fruit drinks, wine, syrups, cream fillings, chocolate, (dairy) cream, milk, butter. Last used for corn syrup. Inlets/outlets: 2-1/2 in. dia. S-line fittings. Overall dimensions: 50 in. L x 17 in. W x 20-1/2 in. H. SOLD
|
|
Click here for more information (192.8 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Pump Stainless Steel
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: 37a.RW-44.3a
|
Serial No: 7047SS
|
|
Waukesha stainless steel positive pump, size 60, S/N 7047SS, 2-1/2 in. x 2-1/2 in., 5 hp reeves vari drive, cart mounted. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Waukesha 62U1 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 62U1
|
|
Stock No: DCBJ168.10
|
Serial No: 19779 SS
|
|
Waukesha 62U1 Positive Displacement Pump. S/N: 19779 SS. 3-A Sanitary rated. Displacement per revolution: 0.153 gal. Nominal capacity: 90 gpm. Maximum rpm: 600. Seal option: O-ring. CIP-able. Features: bi-directional flow, 3-way mounting, upper shaft position, easy interchangeable installation or conversion.Typical product application: (bakery) sweeteners, fat and oils, fruit fillings(beverage) syrups, cream fillings, chocolate, (dairy) cream, milk, butter. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 18-1/2 in. L x 11 in. W x 14-1/2 in. H. SOLD
|
|
Click here for more information (184.4 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positve Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: OIP105.
|
Serial No: 2785 SS
|
|
Waukesha 60 Positve Displacement Pump. Model: 60. S/N: 2785 SS. 3-A Sanitary rated. Pumping capacity (min/max): 12/60 gpm. Displacement per revolution: 0.153 gal. Nominal capacity: 90 gpm. Maximum rpm: 600. Seal option: o-ring. U.S. Motor, 7-1/2 hp, 1800 rpm, 23/460 V, 24.5/12.25 amps, 60 Hz, 3 phase. U.S. Varidrive Module, 80 rpm (min), 395 rpm (max). Typical product application: (beverage), fruit concentrates, fruit drinks, wine, (confectionery) syrups, cream fillings, chocolate, (dairy) cream, milk, butter. Inlets/outlets: 2-1/2 in. dia. S-line fittings. Overall dimensions: 65 in. L x 20 in. W x 32-1/2 in. H. SOLD
|
|
Click here for more information (374.9 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: RPMI05.
|
Serial No: 142470 SS
|
|
Waukesha 60 Positive Displacement Pump. Model: 60. S/N 142470 SS. A-3 Sanitary rated. Displacement per revolution: 0.153 gal. Nominal capacity: 90 gpm. Maximum rpm: 600. Seal option: Single O-Ring. Installation flexibility: Bi-directional flow, versatile 3-Way mounting, lower shaft position, easy to install or convert and interchangeable installation. Typical product application: (Beverage) fruit concentrates, fruit drinks, wine, (confectionery) syrups, cream fillings, chocolate, (dairy) cream, milk, butter. Inlets/outlets: (2) 2-1/2 in. dia. S-Line. Overall dimensions: 21 in. L x 12 in. W x 15 1/2 in. H. SOLD
|
|
Click here for more information (244.4 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 55 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 55
|
|
Stock No: HDNN865.5a
|
Serial No: WR1615 SS
|
|
Waukesha 55 Positive Displacement Pump. Model: 55. S/N: WR1615 SS. Capacity: 57 gpm. Nominal capacity: 90 gpm. Displacement per Revolution: 0.15 gal. Maximum speed: 600 rpm. Lincoln AC Motor, 3 hp, 1750 rpm, 230/460 V, 6.4/4.2 amps, 60 Hz, 3 phase. Pulley ratio: 0.21. Typical product applications: (beverage) fruit concentrates, fruit drinks, wine, syrups, cream fillings, chocolate, (dairy) cream, milk, butter. Inlets/outlets: (2) 2 in. dia. ACME fittings. Overall dimensions: 36 in. L x 24 in. W x 19 in. H. SOLD
|
|
Click here for more information (201.5 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 55 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model:
|
|
Stock No: 38a.IME24014
|
Serial No: DO45448
|
|
Waukesha 55 Positive Displacement Pump. Model: 55. S/N: DO45448. Displacement per revolution: 0.15 gal. Nominal capacity: 90 gpm. Nominal speed: 600 rpm. Motor. Typical product application: (Beverage) fruit concentrates, fruit drinks, wine, (confectionery) syrups, cream fillings, chocolate, (dairy) cream, milk, butter. Inlets/outlets: 2 in. dia. ACME fittings. Overall dimensions: 35 in. L x 16 in. W x 25-1/2 in. H. SOLD
|
|
Click here for more information (335.4 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 60 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: OIP100.
|
Serial No: 704 SS
|
|
Waukesha 60 Positive Displacement Pump. Model: 60. S/N: 704 SS. 316 Stainless steel. Nominal capacity: 90 GPM. Displacement per revolution: 0.153 gallons. Maximum speed: 600 rpm. Easy disassembly for easy cleaning and flexible three-way mounting. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 18-1/2 in. L x 16-1/2 in. W x 14 in. H. SOLD
|
|
Click here for more information (246.5 KB)
|
|
|
Click On Picture
|
SOLD Waukesha 55 Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 55
|
|
Stock No: 32a.RW-46.1
|
Serial No: DO24293 SS
|
|
Waukesha Positive Displacement Pump. Model: 55. S/N: DO24293 SS. 316 Stainless steel construction. Nominal capacity: 0.153 gal/rev. Motor, 5 hp, 1745 rpm, 230/460 V, 12.6/6.3 amps, 60 Hz, 3 phase. Drive, ratio: 8, rpm out: 218 (final). Inlets/outlets: (2) 2 in. dia. ACME fittings. Overall dimensions: 3 ft. 6 in. L x 1 ft. 4 in. W x 1 ft. 6 in. H. SOLD
|
|
Click here for more information (247.1 KB)
|
|
|
Click On Picture
|
SOLD Waukeshka Positive Pump 55
|
|
Mfg: Waukesha Cherry-Burell
|
Model: 55
|
|
Stock No: SLSP50F.2
|
Serial No: T-1189SS
|
|
Waukesha Positive Pump with motor. Model 55, S/N T-1189SS. Overall measurements: 26 in. W, 44 in. L, 22 in. H. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Waukesha Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 55 U1
|
|
Stock No: OIP117.
|
Serial No: WR15911 SS
|
|
Waukesha Positive Displacement Pump. Model: 55 U1. S/N: WR15911 SS. Nominal Capacity: 90 gpm. Displacement per Revolution: 0.153 gal. Seal Option: Single O-Ring. Maximum Pressure: 200 psi (13.8 bar). Inlets/outlets: (2) 2 in. dia. ACME fittings. Overall dimensions: 1 ft. 4in. L x 11 in. W x 1 ft. 2 in. H. (ACN70) SOLD
|
|
Click here for more information (171.3 KB)
|
|
|
Click On Picture
|
SOLD Waukesha Positive Displacement Pump
|
|
Mfg: Waukesha
|
Model: 60
|
|
Stock No: KAAM0385.6a
|
Serial No: 18932 SS
|
|
Waukesha Positive Displacement Pump. Model: 60. S/N: 18932 SS. Seal option: Single O-Ring. U.S. Electrical Motor, 5 hp, 1745 rpm, 208-230/460, 15.3-13.6/6.8 amps, 60 Hz, 3 phase. Ultramite Drive, ratio: 6.3, Rpm out: 276 (final). Inlets/outlets: 2-1/2 in. dia. S-line fittings. Overall dimensions: 3 ft. 8 in. L x 1 ft. 2 in. W x 1 ft. 6 in. H. SOLD
|
|
Click here for more information (220.4 KB)
|
|
|
|
|
