|
|
Click On Picture
|
ConFab Systems Stainless Steel Tabletop Conveyor
|
|
Mfg: ConFab Systems
|
Model:
|
|
Stock No: SNBB279.4a
|
Serial No:
|
|
ConFab Systems Stainless Steel Tabletop Conveyor. Belt dimensions: 74 in. L x 7-1/2 in. W. Conveyor inlet/outlet height: 32 in. (1) Heavy duty industrial disconnect switch. Baldor Industrial Motor: 1 hp, 1,725 rpm, 208-230/460 V, 3.5-3.2/1.6 amps, 60 Hz, 3 phase. Dodge Tigear: 2.00 ratio, 2 max. hp (input), 1,750 rpm (input), 626 torque (output). Overall dimensions: 88 in. L x 18 in. W x 51 in. H.
|
|
Click here for more information (223.3 KB)
|
|
|
Click On Picture
|
GEM Equipment Cooling Conveyor
|
|
Mfg: GEM Equipment
|
Model:
|
|
Stock No: SSLP606.10
|
Serial No: 701
|
|
GEM Equipment Cooling Conveyor. S/N: 701. Stainless steel. Provides water and air cooling for products after blanching.(28) Water spray nozzles. Stainless steel belt: 133 in. L x 17 in. W. Product input/output height: 25 in. Cool air flow volume manually controlled through: (4) openings each: 3-1/2 in. W x 11 in. H. Overall dimensions: 12 ft. 6 in. L x 80 in. W x 40 in. H.
|
|
Click here for more information (234.4 KB)
|
|
|
Click On Picture
|
Packaging Equipment Conveyor Table Top
|
|
Mfg: Packaging Equipment
|
Model:
|
|
Stock No: BBCK282.9a
|
Serial No:
|
|
Packaging Equipment Reliable System Tabletop Conveyor. Belt width: 12 in. Maximum product width is 15 in. Effective conveyor length is 20 ft. 4 in. Sprocket: 3 in dia. Pitch: 3/4 in. Belt track width: 5-1/2 in. Reliance Electric Motor, 1/2 hp, 1275 rpm, 208-230/460-480 V, 2.4-2.4/1.2-1.4 amps, 60 Hz, 3 phase. Motor drive. Infeed exit height: 52 in. Overall dimensions: 26-1/2 ft. L x 18 in. W x 54-1/2 in. H.
|
|
Click here for more information (366.6 KB)
|
|
|
Click On Picture
|
2001 Shuttleworth Corner Infeed Slip-Torque Conveyor
|
|
Mfg: Shuttleworth
|
Model:
|
|
Stock No: SGM3018.23a
|
Serial No:
|
|
2001 Shuttleworth Corner Infeed Slip-Torque Conveyor. Job # 101682. Stainless steel. Main feed conveyor dimensions: 11 in. W x 115 in. L. Main conveyor final speed: approx. 42 rpm. (4) Product diverters driven by 1/2 hp GTR Gearmotor at approx. 28 rpm. Diverters feed products into a 32 in. L x 35 in. W conveyor moving at approx. 43 rpm partitioned into 4 lanes. 1st lane is 8 in. W. 2nd lane is 6 in. W. 3rd lane is 6 in. W. 4th lane is 8 in. W. Conveyor is 38 in. off ground. The coefficient of friction between the rotating roller shaft and loose fit rollers controls the amount of driving force transmitted to the product. The product weight and roller section determines the level of driving force. When products accumulate, the rollers beneath slip to avoid jamming, scuffing and shingling. Typical products include: food/beverage, electronic modules, flat panel glass, pc boards, disk drives, pharmaceuticals/healthcare, automotive components, books/labels/tape, cosmetics/healthcare. Overall dimensions: 120 in. L x 50 in. W x 52 in. H. (ACN466)
|
|
Click here for more information (493.4 KB)
|
|
|
Click On Picture
|
DF Equipment Company Transfer Conveyor
|
|
Mfg: DF Equipment Company
|
Model:
|
|
Stock No: DPFI311.a
|
Serial No:
|
|
DF Equipment Company Transfer Conveyor. Maximum aperture/clearance above belt: 10 in. W x 24 in. H. Height at conveyor inlet: 39 in. Height at conveyor outlet: 43-1/2 in. Belt width: 10 in. Maximum allowable product size (with existing guardrails): 7-1/2 in. W. Belt length: 13 ft. 4 in. L. Conveyor uses a sanitary KVP Falcon belt traveling over a stainless frame. Overall dimensions: 13 ft. 11 in. L x 25 in. W x 44 in. H.
|
|
Click here for more information (265.5 KB)
|
|
|
Click On Picture
|
Runway Enterprises Table Top Conveyor
|
|
Mfg: Runway Enterprises
|
Model: RMC-200-SS
|
|
Stock No: NPPC106.
|
Serial No: 155-99
|
|
Runway Enterprises Table Top Conveyor. Model RMC-200-SS, S/N 155-99. Stainless steel. Baldor Motor: Cat No. VWDM3546T, Sepc: 35H809Y102, 1 hp, 230/460 V, 3.2/1.6 amps, 1,725 rpm, 60 Hz, 3 phase. Rockwell Automation: Model MR947594, Size/Ratio 0175B019M14DL1. Dodge Gear Box: stainless steel frame on table. (2) polyurethane belts. Belt dimensions: 24 in. W. Overall dimensions: 87-½ in. L x 35 in. W x 53 in. H.
|
|
Click here for more information (205.0 KB)
|
|
|
Click On Picture
|
Roe Incorporated Mild Steel Table Top Conveyor
|
|
Mfg: Roe Incorporated
|
Model:
|
|
Stock No: SGMI201.2a
|
Serial No:
|
|
Roe Incorporated Mild Steel Table Top Conveyor. Maximum aperture/clearance above belt: 4-1/2 W x 23 in. H. Belt width: 4-1/2 in. Height at conveyor inlet/outlet: 16-1/2 in. Leeson Motor, 3/4 hp, 1725 rpm, 208-230/460 V, 2.8/1.4 FLA, 60 Hz, 3 phase. Tigear Gear Drive, 10 ratio, 172.5 rpm (final). Overall dimensions: 23 ft. L x 36 in. W x 23 in. H. (Belt included).
|
|
Click here for more information (127.7 KB)
|
|
|
Click On Picture
|
Roe Incorporated Mild Steel Table Top Conveyor
|
|
Mfg: Roe Incorporated
|
Model:
|
|
Stock No: SGMI205.2a
|
Serial No:
|
|
Roe Incorporated Mild Steel Table Top Conveyor. Maximum aperture/clearance above belt: 4-1/2 in. W x 23 in. H. Belt width: 4-1/2 in. Height of conveyor inlet/outlet: 16-1/2 in. Reliance Electric Motor, 3/4 hp, 1725 rpm, 208-230/460-480 V, 60 Hz, 3 phase. Tigear Gear Drive, 10 ratio, 172.5 rpm (final). Belt included. Overall dimensions: 26 ft. 3 in. L x 36 in. W x 19 in. H.
|
|
Click here for more information (117.2 KB)
|
|
|
Click On Picture
|
Roe Incorporated Mild Steel Table Top Conveyor
|
|
Mfg: Roe Incorporated
|
Model:
|
|
Stock No: SGMI211.2
|
Serial No:
|
|
Roe Incorporated Mild Steel Table Top Conveyor. Maximum aperture/clearance above belt: 4-1/2 W x 23 in. H. Belt width: 4-1/2 in. Height at conveyor inlet/outlet: 16-1/2 in. Reliance Electric Motor, 3/4 hp, 1,725 rpm, 208-230/460-480 V, 60 Hz, 3 phase. Tigear Gear Drive, 10 ratio, 172.5 rpm (final). Overall dimensions: 23 ft. L x 36 in. W x 23 in. H. (Belt included).
|
|
Click here for more information (149.2 KB)
|
|
|
Click On Picture
|
Nercon Tabletop Transfer Conveyor
|
|
Mfg: Nercon
|
Model:
|
|
Stock No: GAWD060.8a
|
Serial No:
|
|
Nercon Tabletop Transfer Conveyor. Wash-down duty with stainless steel construction. Belt dimensions: 12 in. W x 16 ft. L. Maximum aperture: 18 in. x 16 ft. L. Height at conveyor inlet/outlet: 40 in. Baldor Wash Guard Motor, 1.0/0.75 hp, 1740/1440 rpm, 208/230/190 V, 1.5/1.4-3.4/3.2 FLA, 60/50 Hz, 3 ph. Iron Man Motor Drive, 20 ratio, 87/72 rpm (final), 349 in-lbs torque. Overall dimensions: 16 ft. 3 in. L x 43 in. W x 41-1/2 in. H.
|
|
Click here for more information (233.8 KB)
|
|
|
Click On Picture
|
Taylor Combiner Table Top Conveyor
|
|
Mfg: Taylor
|
Model:
|
|
Stock No: OI52
|
Serial No:
|
|
Taylor Combiner Table Top Conveyor. Two belt system. Belt #1: 140 in. L x 7-1/2 in. W. Clearance: 8 in. W x 9-1/2 in. H. Belt #2: 63 in. L x 5 in. W x 6 in. H. Clearance: 4 in. W x 9-1/2 in. H. Reliance motor, ½ hp, 1725 rpm, 208-230/460-480 V, 2.4-2.4/1.2-1.4 amps, 60 Hz, 3 phase. Overall dimensions: 12 ft. L x 29 in. W x 45 in. H.
|
|
Click here for more information (265.1 KB)
|
|
|
Click On Picture
|
Conveyor System Stainless Steel
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SGMPB090.3a
|
Serial No:
|
|
Conveyor System. Stainless steel. (3) Reliance Electric motors, 1 hp, 1725 rpm, 208-230/460 V, 2.8-2.8/1.4 amps, 60 Hz, 3 phase. (3) Tigear motor drive, 10 ratio, 172.5 out rpm. Dual belt system. Belt dimensions: 92 in. L x 8 in. W (each one). Belt divider clearance: 10-1/2 in. W. Product input/output height: 37 in. Overall dimensions: 11ft. 7 in. L x 31 in. W x 40 in. H.
|
|
Click here for more information (263.7 KB)
|
|
|
Click On Picture
|
Ballinger Lonestar Stainless Steel Table-Top Bi-Pass Conveyor
|
|
Mfg: Ballinger Lonestar
|
Model: 3.25 table
|
|
Stock No: SFEP066.3a
|
Serial No: 0530-14
|
|
Ballinger Lonestar Stainless Steel Table-Top Bi-Pass Conveyor. Model: 3.25 table. S/N: 0530-14. Effective conveyor dimensions: 72 in. L x 4 in. W. Curved section: 14-1/2 in. L. (10) Guide brackets. Adjustable legs. Conveyor inlet/outlet height: 45/35 in. max/min. Overall dimensions: 88 in. L x 15 in. W x 42 in. H.
|
|
Click here for more information (222.5 KB)
|
|
|
Click On Picture
|
Hoppmann Air Conveyor
|
|
Mfg: Hoppmann
|
Model:
|
|
Stock No: ENAE46811B.
|
Serial No:
|
|
Hoppmann Air Conveyor. S/N: 389710. Maximum aperture/clearance: 1-3/4 in. W x 1-1/2 in. H (usable). Travel length: 118 in. L. Adjustable guiderails. Conveyor infeed height: 41-1/2 in. H. (adjustable). Conveyor discharge height: 45 in. H (adjustable). Dayton Motor, 1/3 hp, 3450 rpm, 115/230 V, 5.4/2.7 amps, 60 Hz, single phase. Dayton Blower Model: 2C820. Overall dimensions: 118 in. L x 24 in. W x 53 in. H.
|
|
Click here for more information (320.7 KB)
|
|
|
Click On Picture
|
Flex Top Chain Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNPM030.a
|
Serial No:
|
|
Flex Top Chain Dual Conveyor. (2) SM Cyclo motors, 1/2 hp, 1740 rpm, 230/460 V, 2.1/1.1 amps, 60 Hz, 3 phase. (2) SM Cyclo motor drives, 1/2 hp, output rpm: 83.3, ratio: 21. Conveyor dimensions: 9 ft. 5 in. L x 7-1/2 in. W. From belt to floor: 16 in. H. Clearance dimensions: maximum 10-1/2 in. W, minimum 4 in. W. Missing support (legs). Overall dimensions: 10 ft. 9 in. L x 50 in. W x 24 in. H.
|
|
Click here for more information (170.1 KB)
|
|
|
Click On Picture
|
Stainless Steel Table Top Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SGMT295.2
|
Serial No:
|
|
Stainless Steel Table Top Conveyor. Unit consists of (6) removable pieces with dual adjustable guardrails. Belt type: REX 1701T. Effective conveyor belt length: 2-1/2 in. W x 258 in. L. Overall dimensions: (Piece #1) 82 in. L x 12 in. W x 13 in. H, (Piece # 2) 63 in. L x 12 in. W x 13 in. H, (Piece # 3) 71 in. L x 12 in. W x 13 in. H, (Piece #4, 45° angle) 17 in L. x 12 in. W x 13 in. H, (Piece #5, 90° angle) 49 in. L x 22 in. W x 14 in. H, (Piece #6, 90° angle) 20-1/2 in. L x 27-1/2 in. W x 14 in. H.
|
|
Click here for more information (162.0 KB)
|
|
|
Click On Picture
|
Power Roller Pack off Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: GAWD069.7
|
Serial No:
|
|
Power Roller Pack Off Conveyor. Holds (80) 1-1/2 in W x 20-7/8 in L rollers that are pushed by a 12 in. W x 114 in L (usable) rubber conveyor belt. Conveyor infeed/exit height: 35 in. Leeson Wash Guard Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.6-3.8/1.9 amps, 60 Hz, 3 phase. Ironman Speed Reducer. Overall dimensions: 121 in. L x 24 in. W x 50 in. H.
|
|
Click here for more information (169.7 KB)
|
|
|
Click On Picture
|
1998 Krones Machinery Conveyor
|
|
Mfg: Krones
|
Model: Glyde-Liner
|
|
Stock No: SUBF233.2a
|
Serial No: 994-T06
|
|
1998 Krones Machinery Conveyor. Model: Glyde-Liner. S/N: 994-T06. Uniform stainless steel design. Maximum aperture/clearance above belt: 13 in. W x 14 ft. 8 in. L. Reliance Electric Motor, 2 hp, 1750 rpm, 230/460 V, 5.8/2.9 amps, 60 Hz, 3 phase. Nord Gear Drive, ratio: 82, final rpm: 21.3. The Krones conveyor can handle glass bottles, jars, plastic containers, cans, etc. It's adjustable guide rails can adapt to a large range of heights. It's open design is optimal for debris removal. Conveyor infeed height: 41 in. Conveyor exit height: 41-1/2. Overall dimensions: 16 ft. 6 in. L x 40 in. W x 51 in. H.
|
|
Click here for more information (388.8 KB)
|
|
|
Click On Picture
|
Stainless Steel Tabletop Conveyor Section
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNCC605C.
|
Serial No:
|
|
Stainless Steel Tabletop Conveyor Section. Adjustable guiderails. Currently set up to transport items of 3-1/2 in. width. Sprocket diameter: 5-1/2 in. Pitch: 2-1/4 in. Running gap for conveyor belt is 2-1/2 in. Infeed/exit height: 35-1/2 in. Overall dimensions: 48 in. L x 15-1/2 in. W x 40 in. H.
|
|
Click here for more information (157.6 KB)
|
|
|
Click On Picture
|
Stainless Steel Tabletop Conveyor Section
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNCC605H.
|
Serial No:
|
|
Stainless Steel Tabletop Conveyor Section. Maximum belt size accepted: 4 in. Adjustable guiderails. Currently set up to transport items 2-1/2 in. wide. Running gap for conveyor belt is 1-1/2 in. Infeed/exit height: 40 in. Overall dimensions: 106 in. L x 12 in. W x 45 in. H.
|
|
Click here for more information (142.9 KB)
|
|
|
Click On Picture
|
General Conveyor Co. Table Top Conveyor
|
|
Mfg: General Conveyor Co.
|
Model:
|
|
Stock No: SNCC605I.
|
Serial No:
|
|
General Conveyor Co. Table Top Conveyor. 6 in. D x 3/4 in. W sprocket with 1-1/2 in. spacing between teeth. Adjustable guide rail. 3-1/4 maximum product size. Infeed/outfeed height: 34 in. Overall Dimensions: 49-1/2 in. L x 12in. W x 10-1/2 H.
|
|
Click here for more information (236.5 KB)
|
|
|
Click On Picture
|
Stainless Steel Table Top Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNCC605M.
|
Serial No:
|
|
Stainless Steel Table Top Conveyor. Maximum conveyor chain width: 4-1/2 in. Max product width: 3-3/4 in. Stainless steel guide rails. A-B photo eye, 500 series with quick disconnect photo sensor. Infeed/outfeed height: 35 in. Overall Dimensions: 180 in. L x 16 in. W x 40 in. H
|
|
Click here for more information (175.6 KB)
|
|
|
Click On Picture
|
General Conveyor Co. Stainless Steel Table Top Conveyor
|
|
Mfg: General Conveyor Co.
|
Model:
|
|
Stock No: SNCC605N.
|
Serial No: 940640
|
|
General Conveyor Co. Stainless Steel Table Top Conveyor. S/N: 940640. (2) 6 in. sprockets with 1 in. gap between gear teeth. Maximum conveyor belt width: 4-1/2 in. SEW Motor and drive:1 hp, 450-2230 rpm, 230/460V, 3.9/1.95 amps. 60 Hz, 3 phase. Infeed/outfeed height: 35 in. Overall Dimensions: 36 in. L x 21 in. W x 42 in. H.
|
|
Click here for more information (165.8 KB)
|
|
|
Click On Picture
|
Stainless Steel Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: EEGC287.2a
|
Serial No:
|
|
Stainless Steel Belt Conveyor. Belt width: 12 in. W. Belt type: RAM 821POM G 1200. Adjustable guide rails. Baldor DC Motor, 1 hp, 1750 rpm, 180 V, 5 amps. Motor drive. Conveyor infeed height 27 in. Conveyor exit height: 28 in. Overall dimensions: 94 in. L x 20 in. W x 31 in. H.
|
|
Click here for more information (157.8 KB)
|
|
|
Click On Picture
|
Stainless Steel Tandem Tabletop Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DTWA353H.
|
Serial No:
|
|
Stainless Steel Tandem Tabletop Conveyor. Conveyor 1- Maximum belt size handled: 4-1/2 in. W. Running gap for conveyor: 1-1/2 in. Sprocket diameter: 6 in. Pitch: 3/4 in. Conveyor 2- Maximum belt size handled: 4-1/2 in. W. Running gap for conveyor: 2-1/4 in. Sprocket diameter: 6 in. Pitch: 1-1/2 in. Reliance Electric Motor, 1-1/2 hp, 1725 rpm, 208-230/460-480 V, 5.6-5.6/2.8-3.0 amps, 60 Hz, 3 phase. Reeves Ultra Adjustable Speed Drive, size: 1B16, 62/7.7 rpm (max/min). Overall dimensions: 93 in. L x 26 in. W x 25-1/2 in. H.
|
|
Click here for more information (221.1 KB)
|
|
|
Click On Picture
|
Stainless Steel Tabletop Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: DTWA353E.
|
Serial No:
|
|
Stainless Steel Tabletop Conveyor. Belt width: 3-1/4 in. Guide brackets for adjustable guides. Sprocket diameter: 5 in. Pitch: 3/4 in. Leeson DC Motor, 1/2 hp, 1750 rpm, 180 V, 7.6 amps. Sterling Electric Speed Reducer, 20 ratio, 87.5 rpm (final). Overall dimensions: 104 in. L x 19 in. W x 32 in. H.
|
|
Click here for more information (187.6 KB)
|
|
|
Click On Picture
|
SECO Simplimatic Engineering Company Conveyor
|
|
Mfg: SECO
|
Model:
|
|
Stock No: HDBA042.33a
|
Serial No:
|
|
SECO Simplimatic Engineering Company Conveyor. Product clearance: 5-1/2 in. W x 13 in. H. Includes (2) 6 in. dia. sprockets with a 3/4 in. tooth pitch. Baldor Motor, 1/2 hp, 1725 rpm, 208-230/460 V, 1.8-1.6/.8 amps, 60 Hz, 3 phase. Flexaline Grove Gear, Ratio: 40, 43.125 rpm (final). Conveyor infeed/exit height: 48 in. Overall dimensions: 49 in. L x 21 in. W x 77 in. H.
|
|
Click here for more information (157.1 KB)
|
|
|
Click On Picture
|
SECO Simplimatic Engineering Company Conveyor
|
|
Mfg: SECO
|
Model:
|
|
Stock No: HDBA042B.
|
Serial No:
|
|
SECO Simplimatic Engineering Company Conveyor. Baldor Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.6-3.2/1.6 amps, 60 Hz, 3 Phase. Flexaline Grove Gear, 1.02 Hp Input, Ratio: 80. Infeed/Exit: 49 in. H. Product Clearance: 24 in. W x 16-1/2 in. H. (4) 6 in. dia. sprocket with a 3/4 in. spacing between teeth. Overall Dimensions: 10 ft. 3 in. L x 34 in. W x 79 in. H.
|
|
Click here for more information (283.7 KB)
|
|
|
Click On Picture
|
SECO Simplimatic Engineering Company Conveyor
|
|
Mfg: SECO
|
Model:
|
|
Stock No: HDBA042E.
|
Serial No:
|
|
SECO Simplimatic Engineering Company Conveyor. Product clearance: 6-1/4 in. W x 15 in. H. Includes (1) 7 in. dia. x 3-1/4 in. W sprockets with a 1-1/2 in. tooth pitch and (1) 6 in. dia. x 1-3/4 in. W sprockets with a 1-3/4 in. tooth pitch. Baldor Motor, 1-1/2 hp, 1725 rpm, 208-230/460 V, 4.6-4.2/2.1 amps, 60 Hz, 3 phase. Flexaline Grove Gear, Ratio: 40, 43.125 rpm final). Overall dimensions: 50 in. L x 20 in. W x 37-1/2 in. H.
|
|
Click here for more information (221.0 KB)
|
|
|
Click On Picture
|
Flex Top Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNPM056.a
|
Serial No:
|
|
|
|
Click On Picture
|
SOLD Table Top Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: 294
|
Serial No:
|
|
3.5 inch table top conveyor, overall 144 inch width x 148 inch length x 43.5 inch height, 30.5 inch legs, transport chain 4.5 inch width, conveyor 4.75 inch width. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Arrowhead Conveyor Corporation Conveyor Stainless Steel
|
|
Mfg: Arrowhead Conveyor
|
Model:
|
|
Stock No: 135.SGM12080.15
|
Serial No:
|
|
Arrowhead Conveyor Corporation Conveyor Stainless Steel 131 ft., (10) straight pieces: 20 ft., 20 ft., 17 ft. 2 in., 14 ft. 10 in., 11 ft. 8 in., 10 ft., 6 ft. 4 in., 7 ft. 7 in., 7 ft. 2 in., 5 ft. 9 in., (2) 45 degree pieces, 2 ft. 9 in. L x 2 ft. 9 in. W, 5 in. beams, 6 in. W to side rails, less drive and belt, overall dimensions 131 ft. 6 in. L x 5 in. W x 24 in. H.
SOLD
|
|
Click here for more information (371.2 KB)
|
|
|
Click On Picture
|
SOLD Serpentine Table Top Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: GM307.7a
|
Serial No:
|
|
Serpentine Table Top Conveyor. 43 ft. L x 3-1/2 in. W. Overall dimensions: 11 ft L x 5 ft. W x 32 in. H.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Table Top Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: CGCB052.17a
|
Serial No:
|
|
Table Top Conveyor. 18 ft. of 3 in. Motor drives and electrics.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Table Top Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: CGCB053.
|
Serial No:
|
|
Table Top Conveyor. 17 ft. of Doublewide 7-1/2 in. (15 in. Total) Motor drives and electrics.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Stainless Steel Work Table/Accumulation Table Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SJFK001.2a
|
Serial No:
|
|
Stainless Steel Work Table/Accumulation Table Conveyor. Conveyor dimensions: 120 in. L x 17 3/4 in. W. Dayton Motor: 3/4 hp, 1725 rpm, 90 VDC, 8.2 amps, 1 phase. Boston gear drive: input hp: 0.45, output torque: 630 lb in, ratio: 60. Pulley ratio: 2.6:1. Variable Speed. Ratiotrol DC motor control. Model: Beta II. Overall dimensions: 120 in. L x 36 in. W x 58 in. H. SOLD
|
|
Click here for more information (198.7 KB)
|
|
|
Click On Picture
|
SOLD Conveyor with Metal Belt
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SABE146B.
|
Serial No:
|
|
Conveyor with Metal Belt. Belt dimensions: 55 in. L x 12 in. W. Clearance dimensions: 12 in. W x 3 in. H. Browning motor drive, S/N: 8909, Part No: 9HB1-LR20, ratio: 2-1. Overall dimensions: 90 in. L x 32 in. W x 42 in. H. SOLD
|
|
Click here for more information (314.7 KB)
|
|
|
Click On Picture
|
SOLD Racetrack Conveyor
|
|
Mfg: Standard Brands Inc.
|
Model:
|
|
Stock No: 18a.END88180.7a
|
Serial No:
|
|
Race-Track Conveyor, Standard Brands Inc., Belt: 4-1/2 in. W x 221 in. L, Stainless steel frame with floor mounting plates, Conveyor Height: 40-1/2 in. adjustable, floor mounting plates less drive and side rails, Overall Dimensions: 7 ft. 8 in. L x 4 ft. 8 in. W x 43 in. H. SOLD
|
|
Click here for more information (248.7 KB)
|
|
|
Click On Picture
|
SOLD Stainless Steel 90° Tabletop Conveyor Section
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNCC001.
|
Serial No:
|
|
Stainless Steel 90° Tabletop Conveyor Section. Adjustable guiderails. Currently set-up to run items with a width of 5 in. Running gap for conveyor belt is 2-1/2 in. Allen-Bradley Photoswitch, Model: 42MRU-5000, Series C. Infeed/exit height: 35 in. Overall dimensions: 60 in. L x 27 in. W x 40-1/2 in. H. SOLD
|
|
Click here for more information (143.1 KB)
|
|
|
Click On Picture
|
SOLD General Conveyor Co. Stainless Steel Table Top Conveyor
|
|
Mfg: General Conveyor Co.
|
Model:
|
|
Stock No: SNCC605F.
|
Serial No:
|
|
General Conveyor Co. Stainless Steel Table Top Conveyor. 6 in. D X 3/4 in W sprocket with 1-1/2 in. teeth spacing. Eurodrive Motor: 0.44-.75 Hp, 2250 to 2450 rpm, 60 Hz. Eurodrive gear box ratio: 25.7. Adjustable guide rails. Max product size: 3-1/4. Infeed/outfeed height: 34 in. Overall Dimensions: 48 in. L x 19-1/2 in. W x 39-1/2 H. SOLD
|
|
Click here for more information (227.6 KB)
|
|
|
Click On Picture
|
SOLD Stainless Steel Chain Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: ERCS018.
|
Serial No:
|
|
Stainless Steel Chain Conveyor. Maximum product width: 11 in. Leeson Motor, 1.5 hp, 1725/1425 rpm, 208-260/460 V, 4.6/5.4 amps, 60/50 Hz, 3 phase. Rolls on (8) wheels for easy maneuverability. Infeed/exit height: 45-1/2 in. H. Overall dimensions: 26 ft. 4 in. L x 34 in. W x 46 in. H. SOLD
|
|
Click here for more information (180.3 KB)
|
|
|
Click On Picture
|
SOLD Nercon Engineering and Mfg. Inc. Table Top Conveyor
|
|
Mfg: Nercon Engineering and Mfg. Inc.
|
Model: QMC-010-0329
|
|
Stock No: SGMPB177.3a
|
Serial No:
|
|
Nercon Engineering and Mfg. Inc. Table Top Conveyor. Model: QMC-010-0329. Conveyor effective length: 5-3/4 in. W x 70 in. L. Marathon Electric Motor, 1/2 hp, 1725 rpm, 208/230/460 V, 60 Hz,3 phase. Grove Gear Drive, Ratio: 30:1, 57.5 rpm (output). S/N n/a. Overall dimensions: 72-1/2 in. L x 16 in. W x 41 in. H. SOLD
|
|
Click here for more information (211.4 KB)
|
|
|
Click On Picture
|
SOLD Elf Machinery 10 ft Tabletop Conveyor with Speed Controller
|
|
Mfg: Elf Machinery
|
Model: 10' Conv
|
|
Stock No: NGSB130.10
|
Serial No: 1000004
|
|
Elf Machinery 10 ft Tabletop Conveyor with Speed Controller. Model: 10' Conv. S/N: 01000004. Belt dimensions: 4-1/2 in. W x 120 in. L. Conveyor Height: 32-1/2 in. Reliance Electric Speed Controller. Magnetek Variable Speed DC motor: 1/2 hp, 1725 rpm. Plastic belt measuring 4.5 in. W. Conveyor is about 4.75 in. W x 120 in. long. Overall dimensions: 120 in. L x 15 in. W x 38 in. H. SOLD
|
|
Click here for more information (166.9 KB)
|
|
|
Click On Picture
|
SOLD Stainless Steel Belt Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: ERCS060.
|
Serial No:
|
|
Stainless Steel Belt Conveyor. Link belt width: 2 ft. Maximum aperture/clearance above belt: 2 ft. 2-1/2 in. W x 5-1/2 in. H. Rod diameter: 0.175 in. Distance between rods: 0.6 in. Gap between rods: 1 ft. 11-1/4 in. L x 1/2 in. W. (4) Wheels for easy maneuverability. Baldor Industrial Motor, 1/2 hp, 208-230/460 V, 1.8-1.6/0.8 amps, 1725 rpm, 60 Hz, 3 phase. Hub City Drive, ratio: 30/1WR, 57.5 rpm (final). Conveyor infeed/exit height: 3 ft. 9 in. Overall dimensions: 15 ft. 6 in. L x 3 ft. 6 in. W x 4 ft. 3 in. H. SOLD
|
|
Click here for more information (176.1 KB)
|
|
|
Click On Picture
|
SOLD ConFab Systems Stainless Steel Tabletop Conveyor
|
|
Mfg: ConFab Systems
|
Model:
|
|
Stock No: SNBB280.19a
|
Serial No:
|
|
ConFab Systems Stainless Steel Tabletop Conveyor. Approximately 30 feet long with two 90 degree turns. Can be arranged in different configurations or separated. Belt width: 7.5 in. Track dimensions: 7 in. W x 370 in. L. Conveyor outlet height: 36 in. Conveyor inlet height: 20 in. H. (1) Heavy duty industrial disconnect switch. Baldor Industrial Motor: 1 hp, 1725 rpm, 208-230/460 V, 3.5-3.2/1.6 amps, 60 Hz, 3 phase. Dodge Tigear: 2.00 ratio, 2 max. hp (input), 1750 rpm (input), 626 torque (output). Model, S/N: n/a. Overall dimensions: 129 in. L x 40 in. W x 40-1/2 in. H.
SOLD
|
|
Click here for more information (278.3 KB)
|
|
|
Click On Picture
|
SOLD Stainless Steel 90° Tabletop Conveyor Section
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: SNCC002.
|
Serial No:
|
|
Stainless Steel 90° Tabletop Conveyor Section. Belt width: 4-1/2 in. Belt type: REX 880TAB. Adjustable guiderails. Currently set up to transport items of 4 in. width. Sew Eurodrive Motor, 0.75 hp, 9/47 rpm (min/max), 230/460 V, 2.9/1.45 amps, 60 Hz, 3 phase. Sew Eurodrive Variable Speed Drive, 44.22 ratio. Infeed/exit height: 36 in. Overall dimensions: 104 in. L x 57 in. W x 41 in. H. SOLD
|
|
Click here for more information (162.3 KB)
|
|
|
Click On Picture
|
SOLD Orics Infeed Dual Belt Cleated Conveyor
|
|
Mfg: Orics
|
Model: SCCDX1800
|
|
Stock No: EKTF9536.1
|
Serial No: JP4992
|
|
Orics Infeed Dual Belt Cleated Conveyor. Model: SCCDX1800. S/N: JP4992. Belt width: 6 in. Height at conveyor inlet/outlet: 43 in. H (adjustable). Cleat spacing is every 12 in. Electrical requirements: 180 V, 10 Amps, single phase. Baldor Industrial Motor, 1 hp, 1,750 rpm, 90 V, 10 Amps. Overall dim: 18 ft. 25 in. L x 26 in. W x 51 in. H. SOLD
|
|
Click here for more information (265.1 KB)
|
|
|
Click On Picture
|
SOLD Stainless Steel Conveyor
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: EEGC288.2a
|
Serial No:
|
|
Stainless Steel Conveyor, Belt dimensions: 69 in. L x 12 in. W. Conveyor height off ground: 29 in. Motor specs: 1/2 hp, 1,740 rpm, 208-220/440 V, 1.84/0.92 amps, 60 Hz, 3 phase. Morse Raider Reducer: Ratio: 50, Output Torque: 309 in. lbs. Conveyor final speed: 35 rpm. Overall dimensions: 72 in. L x 29 in. W x 59 in. H. SOLD
|
|
|
|
|
|
|
