|
|
Click On Picture
|
Tri Clover PRE 300 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRE300-4M-VC4-SL-S
|
|
Stock No: AACA4764.27
|
Serial No: V9813
|
|
Tri Clover PRE 300 Positive Displacement Pump. Model: PRE300-4M-VC4-SL-S. S/N: V9813. Ports: 4 in. Tri-clamp fittings. Flow rate for a new pump is 300 gpm at max rpm of 500. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Pump has mechanical seals. Drive can be changed to suit your application. Reliance motor: 10 hp, 1755 rpm, 230/460 V, 27.0/13.5 amps, 60 Hz, 3 phase. Viking Helical Gear Reducer: 7.95 ratio, 220 rpm output, part number: 3-551-012-795, size C. Overall dimensions: 4 ft. 10 in. L x 1 ft. 6 in. W x 2 ft. H.
|
|
Click here for more information (476.3 KB)
|
|
|
Click On Picture
|
Tri Clover Positive Displacement Rotary Lobe Pump
|
|
Mfg: Tri Clover
|
Model: PRRED125-2-1/2-UH4-SL-S
|
|
Stock No: CSWB128.7
|
Serial No: P1953J
|
|
Tri Clover Positive Displacement Rotary Lobe Pump. Model: PRRED125-2-1/2-UH4-SL-S. S/N: P1953J. Flow rate for new pump is 120 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. Drive can be changed to suit your application. Seal option: double mechanical with flushing. SEW variable speed drive. Motor: 10 hp, 230/460 V, 27.6/13.8 amps, 1740 rpm, 3 phase, 60 Hz. Final rpm: 390-0 (tested). Gear box ratio: 11.81. Tri-Clover positive displacement pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. Inlets/outlets: (2) 2 ½ in. dia. NPT. Overall dimensions: 5 ft. L x 1 ft. 4 in. W x 2 ft. 10 in. H.(ACN234).
|
|
Click here for pump curve (20.9 KB)
Click here for more information (372.4 KB)
|
|
|
Click On Picture
|
Tri Clover PRS125 Rectangular Inlet PD Pump
|
|
Mfg: Tri Clover
|
Model: PRS125-R3-TC1-ST-S
|
|
Stock No: JMB522C.
|
Serial No: 186188-01
|
|
Tri Clover PRS125 Positive Displacement Pump. Model: PRS125-R3-TC1-ST-S. S/N: 186188-01. Capacity: 104 gpm @ 50 psi. Pump displacement per 100 rpm: 30 gal. Maximum capacity: 120 gpm @ 20 psi. Seal option: Single mechanical seals. Motor, 5 hp, 1745 rpm, 230/460 V, 12.6/6.3 amps, 60 Hz, 3 phase. Speed Reducer, ratio: 8.0, 218 rpm (final). Tri-Clover positive pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. For operations such as: liquid sugar, tacky products like corn syrup, and viscous products. Inlets: (1) 9 in. L x 2-1/2 in. W rectangular infeed. Outlets: (1) 3 in. dia. ACME fitting. Overall dimensions: 40 in. L x 19 in. W x 24 in. H.
|
|
Click here for pump curve (20.9 KB)
Click here for more information (195.4 KB)
|
|
|
Click On Picture
|
Tri-Clover PRE300 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRE300-4M-UH4-SL-S
|
|
Stock No: TACJ0212.22a
|
Serial No: T0136
|
|
Tri-Clover Positive Displacement Pump. Model: PRE300-4M-UH4-SL-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. Sterling Electric motor: 10 Hp, 1755 RPM, 230/460 V, 26.4/13.2 A, 60 Hz, 3 Phase. Sterling Electric drive: 10 output Hp, 1755/850 RPM in/out, 3.37 gear ratio. Inlet/outlet: (2) 4 in. S-Line. Overall dimensions: 5 ft. 2 in. L x 1 ft. 6-1/2 in. W x 2 ft. 4-5/8 in. H.(G-J).
|
|
Click here for more information (360.0 KB)
|
|
|
Click On Picture
|
1994 Tri Clover TSR - Series Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: TSR1NSS-10MDV0WL-A
|
|
Stock No: OIP123.
|
Serial No: 190336-01
|
|
1994 Tri Clover TSR-Series positive displacement pump. Model: TSR1NSS-10MDV0WL-A. S/N: 190336-01. Capacity: 3 gpm @ 7.5 psi. Displacement per Revolution: 0.006 gal. Word Gear Electric Motor, ½ hp, 1700 rpm, 230/460 V, 1.84/.92 amps, 60 Hz, 3 phase. Drive, ratio: 3.89, rpm out: 437 (final). The TSR-series pumps can handle media with wide viscosity ranges, are suitable for CIP (Cleaning In Place), and conform to USA 3A Sanitary Standard. The characteristic smooth, low shear pumping action is ideal for products such as creams, gels, emulsions, aerated mixtures, as well as delicate cells and organic solids in suspension. Inlets/outlets: (2) ¾ in. dia. S-line fittings. Overall dimensions: 2 ft. 9 in. L x 1 ft. 2 in. W. x 1 ft. 3 in. H.(ACN60).
|
|
Click here for more information (238.3 KB)
Click here for Pump Curve (566.7 KB)
|
|
|
Click On Picture
|
Tri-Flo SPRE300 Positive Displacement Pump
|
|
Mfg: Tri-Flo
|
Model: SPRE300MTC1WTS
|
|
Stock No: CCPL002.
|
Serial No:
|
|
Tri-Flo Positive Displacement Pump. Model: SPRE300MTC1WTS. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Seal option: single mechanical seals. Newman electric motor, 10 hp, 1170 rpm, 230/460 V, 30/15 amps, 60 Hz, 3 phase. Motor pulley diameter: 4-1/2 in. Gear pulley diameter: 18-1/2 in. Rpm out: 284 (final). Inlets/outlets: (2) 4 in. dia. S-line fittings. Overall dimensions: 4 ft. 2 in. L x 2 ft. 5 in. W x 2 ft. 6 in. H.(ACN291).
|
|
Click here for pump curve (22.8 KB)
Click here for more information (153.4 KB)
|
|
|
Click On Picture
|
Rotary Pump
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: RCJF1633I
|
Serial No:
|
|
|
|
Click On Picture
|
Rotary Pump
|
|
Mfg: Not Specified
|
Model:
|
|
Stock No: RCJF1633P
|
Serial No:
|
|
|
|
Click On Picture
|
Tri-Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRR60-2-TC1-4-SL-S
|
|
Stock No: EMRW002
|
Serial No: 201542-01
|
|
Tri-Clover Positive Displacement Pump. Model: PRR60-2-TC1-4-SL-S. S/N: 201542-01. Leeson motor: 5 hp, 208-230/460 V, 13/6.5 amps, 1760 rpm, 184TC frame, 3 phase, 60 Hz. Final rpm: 291 (tested). Inlet/outlet: (2) 2 in. bevel seat. Overall dimensions: 4 ft. 3 in. L x 1 ft. 5 in. W x 1 ft. 10 in. H.
|
|
Click here for more information (292.2 KB)
|
|
|
Click On Picture
|
Tri Clover PRS60 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRS60-3M-UH2-ST-S
|
|
Stock No: SKFC004.a
|
Serial No: 112929-01
|
|
Tri Clover PRS60 Positive Displacement Pump. Model: PRS60-3M-UH2-ST-S. S/N: 112929-01. Maximum capacity @ 20 psi: 60 gpm. Displacement per 100 revolutions: 17.5 gal. Side-mount. Tri Clover pumps perform more effective on suction lift service; handle anything from liquids to semi-solids with entrained vapors. Reduced maintenance costs and downtime with their longer seal and rotor life. Inlets/outlets: (2) 3 in. dia. S-Line fittings. Overall dimensions: 1 ft. 5 in. L x 1 ft. 3 in. W x 1 ft. 4 in. H.
|
|
Click here for more information (227.6 KB)
Click here for pump curve (22.4 KB)
|
|
|
Click On Picture
|
Tri-Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model:
|
|
Stock No: RCJF1632.32a
|
Serial No:
|
|
Tri-Clover Positive Displacement Pump. (2) 7-3/4 in. rotors. Eaton Corp. Char-Lynn® 10,000 series Hydraulic motor, model no: 119 1029 003. Inlet / outlet: (2) 6 in. dia. flange. (8) 7/8 in. mounting holes. 3-5/8 in. adjacent, 9-1/2 in. opposite. Overall dimensions: 3 ft. 8 in. L x 1 ft. 8 in. W x 1 ft. 8-1/2 in. H.
|
|
Click here for more information (402.1 KB)
|
|
|
Click On Picture
|
Tri Clover PR300 Rotary Pump
|
|
Mfg: Tri Clover
|
Model: PR300-4-TC1-4-SL-S
|
|
Stock No: RCJF1611.15
|
Serial No: U2583
|
|
Tri Clover PR300 Rotary Pump. Model: PR300-4-TC1-4-SL-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. Missing motor. (2) 6 in. dia. flange. (8) 7/8 in. dia. mounting hole. 3-3/4 in. adjacent, 9-1/2 in. opposite. Overall dimensions: 5 ft. 3-3/8 in. L x 2 ft. 2-3/4 in. W x 1 ft. 10-1/2 in. H.
|
|
Click here for more information (429.7 KB)
Click here for pump curve (22.8 KB)
|
|
|
Click On Picture
|
Tri-Clover PR300 Rotary Pump
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: RCJF1610.12a
|
Serial No:
|
|
Tri-Clover Rotary Pump. Model: PR300. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. (2) 7-3/4 in. rotors. (2) Flanges diameter: 6 in. (8) mounting holes 7/8 in. dia. Adjacent: 3-3/4 in. opposite: 8-7/8 in. Overall dimensions: 2 ft. 1 in. L x 1 ft. 8 in. W x 1 ft. 6 in. H.
|
|
Click here for more information (311.5 KB)
Click here for pump curve (22.8 KB)
|
|
|
Click On Picture
|
Tri Clover PR300 Rotary Pump
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: RCJF1609.15
|
Serial No:
|
|
Tri Clover Rotary Pump. Model: PR300. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. (2) 7-3/4 in. rotors. Char-Lynn® Hydraulic drive no. 119 1031 003. Inlet/Outlet: (2) 6 in. dia. flange with (8) 7/8 in. mounting holes. 3-5/8 in. adjacent, 9-1/2 in. opposite. Overall dimensions: 3 ft. 8-1/2 in. L x 1 ft. 8 in. W x 1 ft. 9-3/8 in. H.
|
|
Click here for pump curve (22.8 KB)
Click here for more information (332.2 KB)
|
|
|
Click On Picture
|
Tri-Clover PR300 Pump
|
|
Mfg: Tri Clover
|
Model: PR300-4-TC1-4-ST-S
|
|
Stock No: RCJF1602.15
|
Serial No: T7122J
|
|
Tri-Clover Rotary Pump. Model: PR300-4-TC1-4-ST-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. General Electric motor: 20 HP, 1770 RPM, 200-230/460 V, 49.2/24.6 A, 60 Hz, 3 Phase. (2) 6 in. dia. flanges. (8) 7/8 in. dia. mounting holes. 3-5/8 in. adjacent, 9-1/2 in. opposite. Overall dimensions: 6 ft. 1-1/2 in. L x 1 ft. 9 in. W x 2 ft. 2 in. H.(GJ).
|
|
Click here for more information (455.4 KB)
Click here for pump curve (22.8 KB)
|
|
|
Click On Picture
|
Tri Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: SRU1WLD
|
|
Stock No: DNBA216
|
Serial No: 345141A
|
|
Tri-Clover Positive Displacement Pump. Model: SRU1WLD. S/N: 345141A. Flow rate for new pump is approximately 20 gpm with required horsepower. Discuss with sales person your process and product to determine if this refurbished pump should handle your specific duty. Stainless steel tri-lobe rotors. Single R90 carbon/Stainless steel mechanical seal. Viton elastomers. Inlets/Outlets: (2) 1-1/2 in. horizontal ports with Tri-clamp connections. Overall dimensions: 11 in. L x 7 1/2 in. W x 7 in. H.(ACN43a).
|
|
Click here for pump curve (19.5 KB)
Click here for more information (408.9 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model:
|
|
Stock No: MP-111
|
Serial No: Y3720
|
|
Tri Clover positive pump stainless steel, S/N Y3720, 1-1/2 in. ports with 6 hp electric motor, make Sew Eurodrive, 1,680 rpm, serial no. 850052847 1, 230/460 volts.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model: pred10-1.5-uc4-sl-s
|
|
Stock No: 29a-R493-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel Model pred10-1.5-uc4-sl-s. 1-1/2 in. bevel seat connections. Mounted on painted mild steel portable cart with coupling, guard, and reeves 2 hp vari-drive 520-52 rpm.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover Positive Pump
|
|
Mfg: Tri Clover
|
Model:
|
|
Stock No: 19a.HDVM182
|
Serial No: Y0421
|
|
Tri-Clover Positive Pump, Model PR3-1-UH6-ST-5, S/N Y0421, 3/4 hp 230 3300, 1.375 out, frame 34 in. L x 19 in. W x 30 in. H.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model: pr25-1.5m-us4-st-s
|
|
Stock No: 22a-R619-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel, Model pr25-1.5m-us4-st-s. 1-1/2 in. clamp connections. Top shaft drive.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model: pr25-1.5-uc4-st-s
|
|
Stock No: 29a-R233-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel Model pr25-1.5-uc4-st-s. 1-1/2 in. bevel seat connections. Top shaft drive. With base coupling, guard, and US Motors 2 hp vari-drive rpm unknown.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRED25-1 1/2M-TC1-4-SL-S
|
|
Stock No: OIP046.
|
Serial No: 151081-01
|
|
Tri-Clover Positive Displacement Pump. Model: PRED25-1 1/2M-TC1-4-SL-S, S/N: 151081-01. Impeller diameter: 4-1/4 in. Single mechanical seals. Inlets/outlets: (2) 1-1/2 in. dia. Q-line fittings. Overall dimensions: 14 in. L x 9 in. W x 11 in. H.
SOLD
|
|
Click here for more information (234.2 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Model PRED60-3-UC4-SL-S
|
|
Mfg: Tri Clover
|
Model: PRED60-3-UC4-SL-S
|
|
Stock No: 32.21
|
Serial No: W2605
|
|
Tri Clover Positive Pump. Model PRED60-3-UC4-SL-S, S/N W2605. Inlet (1) 3 in. Outlet (1) 3 in. Motor, Mfg. Euro Drive, 5 hp, 330/ 575 V, 13.6/6.8 amps, 60 Hz, 3 phase, 1,680 rpm, 128 final rpm. Overall dimensions: 16 in. W, 42 in. L, 23 in. H. Cost new about $6,000.
SOLD
|
|
Click here for more information (226.8 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump
|
|
Mfg: Tri Clover
|
Model: PRED125
|
|
Stock No: HDTD002.5a
|
Serial No:
|
|
Tri Clover Positive Pump. Model PRED125. Hydraulic drive and stainless steel base.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover PRED60 Positive Pump
|
|
Mfg: Tri Clover
|
Model: PRED60 3 UC4 SL S
|
|
Stock No: 32.22
|
Serial No: W2606
|
|
Tri Clover Positive Pump. Model PRED60-3-UC4-SL-S, S/N W2606.. Inlet (1) 3 in. Outlet (1) 3 in. Motor, Mfg. Euro Drive, 5 hp, 330/ 575 V, 13.6/6.8 amps, 60 Hz, 3 phase, 1,680 rpm, 128 final rpm. Overall dimensions: 16 in. W, 42 in. L, 23 in. H. Cost new about $6,000.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: S-PR25-11/2M-UC405T-S
|
|
Stock No: RLOL265.6a
|
Serial No: S02818
|
|
Tri-Clover Positive Displacement Pump. Model: S-PR25-11/2M-UC405T-S, S/N: SO2818. O-ring seals. Displacement per 100 revolutions: 8 gal. Capacity: 18 gpm @ 20 psi. Baldor Industrial Motor, 1 hp, 1140 rpm, 208-230/460 V, 3.6-3.4/1.7 amps, 60 Hz, 3 phase. Motor Drive, 229 rpm (final). Inlets/outlets: (2) 1-1/2 in. dia. Q-line fittings. Overall dimensions: 35 in. L x 15 in. W x 17 in. H.
SOLD
|
|
Click here for more information (236.4 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model: pr60-2-uh4-st-s
|
|
Stock No: 29a-R543-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel Model pr60-2-uh4-st-s. 2 in. bevel seat connections. top shaft drive.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover TSR Positive Displacement Pump SOLD
|
|
Mfg: Tri Clover
|
Model: TSR4NLS-25MDU0KT-A0
|
|
Stock No: HDNN862.10
|
Serial No: 466714-01
|
|
Tri-Clover TSR Positive Displacement Pump. Model: TSR4NLS-25MDU0KT-A0. S/N: 466714-01. 3-A sanitary rated. Capacity: 25 gpm @ 84 psi. Seal option: Single mechanical seals. 5 hp, 1725 Badlor motor and APG gear drive with a gear ratio of 5.0. will generate 345 rpm's (final). The TSR is designed for thorough CIP cleaning. Another quality is the interchangeability of rotors for additional flexibility when working with a wider range of temperatures and viscosities. Rotor casing is fully swept, minimizing product entrapment. Handles a wide array of viscosities. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Mounted on base with (4) casters for easy positioning. Overall dimensions: 55-1/2 in. L x 20 in. W x 22 in. H.
SOLD
|
|
Click here for more information (236.3 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover TSR5 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: TSR5NLD-30MEU0WT-A0
|
|
Stock No: RW-2306.5
|
Serial No: 351747-01
|
|
Tri Clover TSR5 Positive Displacement Pump. Model: TSR5NLD-30MEU0WT-A0. S/N: 351747-01. 3A sanitary rated. Displacement: 44.4 gal/100 rev. Seal option: Double mechanical seals. The TSR is designed for thorough CIP cleaning. Another quality is the interchangeability of rotors for additional flexibility when working with a wider range of temperatures and viscosities. Rotor casing is fully swept, minimizing product entrapment. Handles a wide array of viscosities. Inlets/outlets: (2) 3 in. dia. S-line fittings. Overall dimensions: 25 in. L x 14 in. W x 15 in. H. (ACN125) SOLD
|
|
Click here for more information (319.3 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Postive Pump
|
|
Mfg: Tri Clover
|
Model: pr125-2.5m-tc1-4-st-s
|
|
Stock No: 40-R723-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel Model pr125-2.5m-tc1-4-st-s. 2-1/2 in. clamp connections. Upper shaft drive. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump
|
|
Mfg: Tri Clover
|
Model: pr125-2.5m-tc1-4-st-s
|
|
Stock No: 40-R443-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel Model pr125-2.5m-tc1-4-st-s. 2-1/2 in. clamp connections. Upper shaft drive. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump
|
|
Mfg: Tri Clover
|
Model: pr125-2.5m-tc1-4-st-s
|
|
Stock No: 40-R954-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel Model pr125-2.5m-tc1-4-st-s. 2-1/2 in. clamp connections. Upper shaft drive. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model: pr60-2-uh4-st-s
|
|
Stock No: 29a-R719-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel Model pr60-2-uh4-st-s. 2 in. bevel seat connections. top shaft drive. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model: pr25-1.5-th4-st-s
|
|
Stock No: 22a-R314-A
|
Serial No:
|
|
Tri Clover positive displacement pump stainless steel Model pr25-1.5-th4-st-s. 1-1/2 in. bevel seat connections. Top shaft drive. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Rotary Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model: PDPR60
|
|
Stock No: RB-219.7
|
Serial No:
|
|
Tri-Clover positive rotary pump stainless steel, Model PDPR60, 1.5 x 1.5 threaded, with 5 hp reeves vari drive, 1,725 rpm, and stainless steel feed tank 18 in. x 18 in. x 20 in. deep, top mounted agitator. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover PRRED60 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRRED60-2M-TC1-4-SL-S
|
|
Stock No: tGHFI07.
|
Serial No: T6840J
|
|
Tri Clover PRRED60 Positive Displacement Pump. Model: PRRED60-2M-TC1-4-SL-S. S/N: T6840J. Maximum capacity: 60 gpm @ 20 psi. Pump displacement @ 100 rpm: 17.5 gal. Double mechanical seals with water flush. Vented pressure relief cover. Tri-Clover positive pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. Inlets/outlets: 2 in. dia. S-line fittings. Overall dimensions: 24 in L x 12 in W x 16 in H. SOLD
|
|
Click here for more information (226.1 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Tri Flo Pump
|
|
Mfg: Tri Clover
|
Model:
|
|
Stock No: DBP13.1
|
Serial No:
|
|
Tri Clover Tri Flo pump with East Clean AC 15 hp motor, 3,510 rpm. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Rotary Positive Pump
|
|
Mfg: Tri Clover
|
Model: PRED125-4-UC4-W-S
|
|
Stock No: 109
|
Serial No:
|
|
Tri Clover rotary positive pump, Model PRED125-4-UC4-W-S, 3 in. threaded ports, relief cover, bottom shaft drive. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Pump Stainless Steel
|
|
Mfg: Tri Clover
|
Model: PR125 2 ½ M-UC4-ST-S
|
|
Stock No: 108
|
Serial No:
|
|
Tri Clover stainless steel positive pump, Model PR125 2 ½ M-UC4-ST-S, 2-1/2 in. #15 bevel seat ports, bottom shaft drive. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Displacement Rotary Pump PRED Series
|
|
Mfg: Tri Clover
|
Model: PRED125-2-1/2-TC1-4-WT-S
|
|
Stock No: BIIR8005B.
|
Serial No: U2156
|
|
Tri Clover Positive Displacement Rotary Pump PRED Series. Model: PRED125-2-1/2-TC1-4-WT-S. S/N: U2156. Seal option: wet seals. Reliance Electric Motor, 7-1/2 hp, 1755 rpm, 230/460 V, 21/10.5 amps, 60 Hz, 3 phase. Nord Gear Drive, ratio: 7.90, torque: 4770 lb-in. rpm out: 222 (final). Inlets/outlets: 2 in. dia. ACME fittings. Overall dimensions: 4 ft. 8 in. L x 1 ft. 7 in. W x 1 ft. 5 in. H. SOLD
|
|
Click here for more information (258.2 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Pumps
|
|
Mfg: Tri Clover
|
Model:
|
|
Stock No: 30.GM779.10
|
Serial No: TY3269
|
|
(3 ) Tri Clover positive pumps, Model TSR4NLD-20MDVOCL, S/N TY3269, flanged ports with 7.5 hp electric motor, make Sew Eurodrive, 1,720 rpm, serial no. 850052846 1, 230/460 volts. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PR125
|
|
Stock No: DCBJ624.2a
|
Serial No:
|
|
Tri Clover Positive Displacement Pump. Model: PR125. Maximum capacity @ 20 psi: 120 gpm. Displacement per Revolution: 0.30 gal. Baldor Industrial Motor, 10 hp, 1760 rpm, 208-230/460 V, 28.5-28.4/14.2 amps 60 Hz, 3 phase. Drive, ratio: 4.1, rpm out: 429 (final). Tri-Clover positive displacement pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 4ft. 1/2 in. L x 1 ft. 6 in. W x 1 ft. 6-1/2 in. H. SOLD
|
|
Click here for more information (179.6 KB)
Click here for Pump Curve (20.9 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover PRRED125 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRRED125-2/12M-TC1-4-SL
|
|
Stock No: DBBP2637.8a
|
Serial No: V1081
|
|
Tri Clover PRRED125 Positive Displacement Pump. Model: PRRED125-2/12M-TC1-4-SL. S/N: V1081. Nominal capacity: 120 gpm at 20 psi. Double mechanical seals with water flush. Vented pressure relief cover. Inlets/outlets: (2) 2-1/2 in. dia. S-line fittings. Overall dimensions: 2 ft. L x 1 ft. 2 in. W x 1 ft. 9 in. H. FAD SOLD
|
|
Click here for more information (272.8 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover PRED125 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRED125-3M-YH4SL-5
|
|
Stock No: HDTD001.5a
|
Serial No: X5979
|
|
Tri Clover PRED125 Positive Displacement Pump. Model: PRED125-3M-YH4SL-5. S/N: X5979. Capacity: 90 gpm at 100 psi. Seal option: single mechanical. Vented pressure relief cover.Reliance Electric Motor, 7-1/2 hp, 1755 rpm, 230/460 V, 21/10.5 amps, 60 Hz, 3 phase. Nord Gear Drive, ratio: 7.90, torque: 4770 lb-in. rpm out: 222 (final). Inlets/outlets: (2) 3 in. dia. S-line fittings. Overall dimensions: 5 ft. L x 1 ft. 4 in. W x 1 ft. 5 in. H. SOLD
|
|
Click here for more information (361.6 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover PREDS Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PREDS125-R3M-UC4-ST-S
|
|
Stock No: OIP097.
|
Serial No: T2296J
|
|
Tri Clover PREDS Positive Displacement Pump. Model: PREDS125-R3M-UC4-ST-S. S/N: T2296J. Capacity: 79 gpm @ 80 psi. Maximum capacity: 120 gpm @ 20 psi. Diplacement per 100 rpm: 30.0 gal. Seal option: double mechanical with flushing. Ajax Electric Motor, 7-1/2 hp, 1200 rpm, 230 rpm (final), 200 V, 22 amps, 60 Hz, 3 phase. Tri-Clover positive pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. For operations such as: liquid sugar, tacky products like corn syrup, and viscous products. Inlets: (1) 9 in. L x 2-1/2 in. W rectangular infeed with a 15 in. L x 4 in. W flange and (4) 1/2 in. thru-holes. Outlets: (1) 3 in. dia. S-line fitting. Overall dimensions: 46 in. L x 20 in. W x 21 in. H. SOLD
|
|
Click here for more information (400.3 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover 3
|
|
Mfg: Tri Clover
|
Model: PRE125
|
|
Stock No: RCJF593
|
Serial No:
|
|
Tri-Clover 3" Rotary Pump. Model: PRE125. 5 hp motor. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover 3
|
|
Mfg: Tri Clover
|
Model: PRE125
|
|
Stock No: RCJF594
|
Serial No:
|
|
Tri-Clover 3" Rotary Pump. Model: PRE125. 5 hp motor. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover Model PR125 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PR125
|
|
Stock No: RCJF197A
|
Serial No:
|
|
Tri-Clover Model PR125 Positive Displacement Pump. Model PR125. Flow rate for new pump is 120 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Stainless steel product contact surfaces. Tri-Clover positive displacement pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. Motor: 5 hp. Inlet/Outlet: 3 in. SOLD
|
|
Click here for pump curve (20.9 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover Model PRR25 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRR25
|
|
Stock No: RCJF343
|
Serial No: 1415
|
|
Tri-Clover Model PRR25 Positive Displacement Pump. Model: PRR25. Flow rate for new pump is 28 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Stainless steel product contact surfaces. Tri-Clover positive pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. For operations such as: liquid sugar, tacky products like corn syrup, and viscous products. Motor: 3 hp. SOLD
|
|
Click here for pump curve (32.5 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover 4
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: RCJF462
|
Serial No: 7207
|
|
Tri-Clover 4" Rotary Pump. Model: PR300. S/N: 7207. 20 hp motor.
SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover 4
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: RCJF463
|
Serial No: 5010
|
|
Tri-Clover 4" Rotary Pump. Model: PR300. S/N: 5010. 20 hp motor. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover 4
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: RCJF464
|
Serial No: 6670
|
|
Tri-Clover 4" Rotary Pump. Model: PR300. S/N: 6670. 20 hp motor. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover 4
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: RCJF465
|
Serial No: 9781
|
|
Tri-Clover 4" Rotary Pump. Model: PR300. S/N: 9781. 20 hp motor. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover 4
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: RCJF466
|
Serial No: 4998
|
|
Tri-Clover 4" Rotary Pump. Model: PR300. S/N: 4998. 20 hp motor. SOLD
|
|
|
|
|
Click On Picture
|
SOLD Tri-Clover Model PRE125 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRE125
|
|
Stock No: RCJF162
|
Serial No:
|
|
Tri-Clover Model PRE125 Positive Displacement Pump. Model: PRE125. Flow rate for new pump is 120 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Stainless steel product contact surfaces. Tri-Clover positive displacement pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. Motor: 10 hp. Inlet/Outlet: 3 in. SOLD
|
|
Click here for more information (20.9 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Model PRRED25 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRRED25-11/2M-YC4-SL
|
|
Stock No: RPCN159.6
|
Serial No: 180672-01
|
|
Tri Clover Model PRRED25 Positive Displacement Pump. Model: PRRED25-11/2M-YC4-SL. Flow rate for new pump is 28 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Sew Eurodrive motor. 2 hp, 1720 rpm, 230/460 V, 6.2/3.1 amps, 60 Hz, 3 phase. Sew Eurodrive speed reducer. Ratio: 4.32:1, rpm in: 1720, rpm out: 398, torque: 317 lb-in, service factor: 3.5. Inlet: (1) 1-1/2 in. dia. S-line fitting. Outlet: (1) 1-1/2 in. dia. S-line fitting. Overall dimensions: 3 ft. 1-1/2 in. L x 11-1/2 in. W x 1 ft. 2-1/2 in. H. SOLD
|
|
Click here for more information (234.0 KB)
Click here for pump curve (32.5 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover PRS125 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRS125-R3-TC1-4-SL-S
|
|
Stock No: JMB522B.
|
Serial No: Z1347
|
|
Tri Clover PRS125 Positive Displacement Pump. Model: PRS125-R3-TC1-4-SL-S. S/N: Z1347. Flow rate for new pump is 100 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Seal option: Single mechanical seals. Teco electric motor, 5 hp, 1750rpm, 230/460 V, 13/6.5 amps, 60 Hz, 3 phase. Reliance Electric gear drive. Tri-Clover positive pumps handle high viscosity products at elevated GPM and pressure ratings, provide longer seal and rotor life, reduce maintenance costs and downtime, perform effectively on suction lift service, and handle liquids and semi-solids with entrained vapors. Products include: liquid sugar, tacky products like corn syrup, and viscous products. Inlet: (1) 9 in. L x 2-1/2 in. W rectangular infeed. Outlet: (1) 3 in. dia. threaded fitting. Overall dimensions: 4 ft. 1 in. L x 1 ft. 9-1/2 in. W x 2 ft. H. (ACN139a) SOLD
|
|
Click here for more information (180.1 KB)
Click here for pump curve (20.9 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover PRE25 Positive Pump
|
|
Mfg: Tri Clover
|
Model: PRE25-11/2M-TC1-4-SL-S
|
|
Stock No: HDPW833.3
|
Serial No: P8052J
|
|
Tri Clover PRE25 Positive Pump. Model: PRE25-11/2M-TC1-4-SL-S. S/N: P8052J. Maximum capacity: 28 gpm @ 28 psi. Displacement @ 100 rpm: 8.0 gallons. Single mechanical seals. The PR line was designed to handle liquids and semi-solids with entrained vapors. It performs effectively for suction lift service and reduces maintenance costs and downtime. For operations such as: liquid sugar, tacky products like corn syrup, and viscous products. Overall dimensions: 14-1/2 in. L x 7 in. W x 11 in. H. SOLD
|
|
Click here for more information (126.9 KB)
Click here for pump curve (32.5 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: TABF02
|
Serial No:
|
|
Tri Clover Positive Displacement Pump. Model: PR300. (2) 7-3/4 in. rotors. Baldor Electric motor: 20 hp, 1765 rpm, 230/460 V, 48/24 A, 60 Hz, 3 phase. SM-Beier Variator: model: S 15 AGY 4, speed range: 0.2-0.8. Input 1750 rpm. (1) 4 in. acme inlet. (1) 4 in. acme outlet. Overall dimensions: 7 ft. ½ in. L. x 2 ft. W. x 2 ft. 4 in. H.(GJ) SOLD
|
|
Click here for more information (684.4 KB)
|
|
|
Click On Picture
|
SOLD Alfa Laval SRU3N Positive Displacement Pump
|
|
Mfg: Alfa Laval
|
Model: SRU3NLS - 20MJE0CC
|
|
Stock No: MDFP032.10
|
Serial No: 03-12-10851A
|
|
Alfa Laval SRU3N Positive Displacement Pump. Model: SRU3NLS - 20MJE0CC. S/N: 03 12 10851A. Single mechanical seal with water flush. Flow rate for new pump is 60 gpm with required horsepower, pressure, and rpm’s. Discuss with sales person your process and product to determine if this refurbished pump should handle your specific duty. Pump currently set-up to do 19 gpm. Baldor motor, 1 hp. 1725 rpm, 208-230/460 V, 3.5-3.2/1.6 amps, 60 Hz, 3 phase. Sterling drive. Ratio: 6.3:1, final rpm: 274. Pump assembly is mounted on a stainless steel frame. Inlet/outlet: (2) 1-1/2 in. S-Line fittings. Overall dimensions: 4 ft. L x 1 ft. ½ in. W x 1 ft. 6 in. H. (ACN111)
SOLD
|
|
Click here for pump curve (19.7 KB)
Click here for more information (470.7 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PR60-2-TC1-4-ST-S
|
|
Stock No: EFMA01
|
Serial No: U1329
|
|
Tri-Clover Positive Displacement Pump. Model: PR60-2-TC1-4-ST-S. Flow rate for new pump is 60 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. (2) 5-3/4 in. rotors. Inlet/outlet: (2) 2 in. ACME. Overall dimensions: 1 ft. 3-1/2 in. L x 9-3/4 in. W x 1 ft. 2-1/2 in. H. SOLD
|
|
Click here for more information (281.9 KB)
Click here for pump curve (22.4 KB)
|
|
|
Click On Picture
|
SOLD Tri Clover 10 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PR10
|
|
Stock No: RB-129.4
|
Serial No: T3311J
|
|
Tri Clover 10 Positive Displacement Pump. Model: PR10. S/N: T3311J. 4-Lobe rotors. Pumping capacity: 9.96 gal @ 474.5 rpm. Maximum capacity @ 20 psi: 12 gpm. Maximum displacement @ 100 rpm: 2.1 gal. Can with stand cold and hot temperatures up to 140°F. Frame mounted. PR is the workhorse if the Tri Clover line, created to make daily takedown applications fast and easy. Lincoln AC Motor, 1 hp, 1740 rpm, 230/460 V, 3.8/1.9 amps, 60 Hz, 3 phase. Final speed: 474.5 rpm. Inlets/outlets: (2) 1-1/2 in. dia. ACME fittings. Overall dimensions: 1 ft. 4 in. L x 1 ft. 3 in. W x 1 ft. 10 in. H. SOLD
|
|
Click here for more information (253.1 KB)
Click here for pump curve (28.8 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PR60-3-TC1-4-ST-S
|
|
Stock No: EFMA02
|
Serial No: W7587
|
|
Tri-Clover Positive Displacement Pump. Model: PR60-2-TC1-4-ST-S. Flow rate for new pump is 60 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Reliance Electric motor: 7.5 hp, 1760 rpm, 230/460 v, 18.0/9.0 a, 60 hz, 3 phase. Motor drive: 5.0 ratio, 1750 input rpm, 350 output rpm, 3495 torque. (2) 5-3/4 in. rotors. Inlet/outlet: (2) 2 in. ACME. Overall dimensions: 4 ft. 2 in. L. x 1 ft. 10 in. W. x 2 ft. H.(ACN116). SOLD
|
|
Click here for pump curve (22.4 KB)
Click here for more information (391.2 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover PR60 Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PR60-2-UC4-ST-S
|
|
Stock No: RCJF455.13
|
Serial No: TC534
|
|
Tri-Clover Positive Displacement Pump. Model: PR60-2-UC4-ST-S. Flow rate for new pump is 60 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. (2) 6 in. rotors. General Electric motor: 5 Hp, 1170 Rpm, 460 V, 6.9 A, 60 Hz, 3 Phase. U.S. Electrical Motors drive: 9.92 Hp, 7.59 ratio, 1750/230 Rpm in/out. Overall dimensions: 4 ft. 10-1/2 in. L x 1 ft. 8-1/2 in. W x1 ft. 7-1/4 in. H.(ACN118). SOLD
|
|
Click here for more information (428.9 KB)
Click here for pump curve (22.4 KB)
|
|
|
Click On Picture
|
SOLD Alfa Laval Positive Displacement Pump
|
|
Mfg: Alfa Laval
|
Model: SRU-2
|
|
Stock No: SCJC155.6
|
Serial No: 01-5-9410A
|
|
Alfa Laval Positive Displacement Pump. Model: SRU-2. S/N: 01-5-9410A. Reliance Electric Industrial Co. motor: 3 hp, 1755 rpm, 230/460 v, 7.6/3.8 a, 60 Hz, 3 phase. Motor drive: 3.30 in hp, 1750 in rpm, 648 out rpm, 322 IN/LB torque, 2.7 ratio. (2) 3 in. stainless steel rotors. Stainless steel base. Inlet/outlet: (2) Tri-Clamps with 1 in. inner dia. and 2 in. outer dia. Overall dimensions: 3 ft. 5-1/2 in. L x 1 ft. 3 in. W x 1 ft. 6 in. H.(ACN86). SOLD
|
|
Click here for more information (522.8 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover Positive Displacement Pump
|
|
Mfg: Tri Clover
|
Model: PRED60-2-UC4-SL-S
|
|
Stock No: RCJF454.4
|
Serial No: TC004
|
|
Tri Clover Positive Displacement Pump. Model: PRED60-2-UC4-SL-S. Flow rate for new pump is 60 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. General Electric motor: serial no. 3560400330. 5 Hp, 1750 RPM, 230/460 V, 13/6.5 A, 60 Hz, 3 Phase. APG motor drive: 6.2 ratio, 11.3 input RPM, 2441 lbs. torque. (2) rotors: 5-3/4 in. L. x 3-1/8 in. W. (1) 2 in. ACME inlet. (1) 2 in. ACME outlet. Overall dimensions: 4 ft. 2-1/2 in. L. x 1 ft. 4 in. W. x 1 ft. 7 in. H. SOLD
|
|
Click here for more information (350.1 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover PR300 Rotary Pump
|
|
Mfg: Tri Clover
|
Model: PR300
|
|
Stock No: RCJF1608.17a
|
Serial No: U3766
|
|
Tri-Clover Rotary Pump. Model: PR300. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. (2) 7-3/4 in. rotors. (2) Flanges diameter: 6 in. 8 mounting holes 7/8 in. dia. Adjacent: 3-3/4 in. opposite: 8-7/8 in. Overall dimensions: 2 ft. 1 in. L x 1 ft. 8 in. W x 1 ft. 6 in. H. SOLD
|
|
Click here for more information (263.1 KB)
Click here for pump curve (22.8 KB)
|
|
|
Click On Picture
|
SOLD Tri-Clover Rotary Pump
|
|
Mfg: Tri Clover
|
Model: PR300-4M-TC1-4-ST-S
|
|
Stock No: RCJF106.25
|
Serial No: TA513J
|
|
Tri Clover Rotary Pump. Model: PR300-4M-TC1-4-ST-S. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this pump should handle your specific duty. (2) 7-3/4 in. rotors. Baldor Electric motor: 15 Hp, 1765 Rpm, 230/460 V, 36/18 A, 60 Hz, 3 Phase. Falk motor drive: 13.86 ratio, 1750/126 Rpm in/out. (2) 6 in. dia. flanges. (8) 7/8 in. dia. mounting holes, 3-3/4 in. adjacent, 8-7/8 in. opposite. Overall dimensions: 5 ft. 9-1/2 in. L x 2 ft. 11-7/8 in. W x 2 ft. 8-1/2 in. H. SOLD
|
|
Click here for more information (454.4 KB)
|
|
|
Click On Picture
|
SOLD Tri-Flo SPRE300 Positive Displacement Pump
|
|
Mfg: Tri-Flo
|
Model: SPRE300MTC1WTS
|
|
Stock No: CCPL001.
|
Serial No: S02243
|
|
Tri-Flo Positive Displacement Pump. Model: SPRE300MTC1WTS. Flow rate for new pump is 300 gpm with required horsepower and pressure. Discuss with salesperson your process and product to determine if this refurbished pump should handle your specific duty. Seal option: single mechanical seals. Century electric motor: 10 HP, 1160 rpm, 230/460 V, 60 Hz, 30/15 amps, 3 phase. Motor pulley diameter: 4-1/2 in. Gear pulley diameter: 18-1/2 in. Rpm out: 282 (final). Inlets/outlets: (2) 4 in. dia. S-line fittings. Overall dimensions: 4 ft. 6 in. L x 2 ft. 1-1/2 in. W x 2 ft. 7 in. H.(ACN291). SOLD
|
|
Click here for pump curve (22.8 KB)
Click here for more information (198.8 KB)
|
|
|
|
|
